Materials Processing Technology, AEMT2011 (Advanced Materials Research)

Materials Processing Technology, AEMT2011 (Advanced Materials Research)

  • ただいまウェブストアではご注文を受け付けておりません。 ⇒古書を探す
  • 製本 Paperback:紙装版/ペーパーバック版/ページ数 3584 p.
  • 言語 ENG
  • 商品コード 9783037851937
  • DDC分類 620.11

Full Description

This work covers surface-engineering/coatings, modeling, analysis and simulation of manufacturing processes, materials forming, materials machining, welding and joining, mechanical behavior and fracture, materials design, computer-aided tooling testing and evaluation of materials, microwave processing of materials, laser processing technology, theory and application of friction and wear, dynamic mechanical analysis, precision manufacturing technology and measurements, waste engineering and management, CAD/CAM/CAE, product design and development, engineering optimization, measure control technologies and intelligent systems, mechanical control and information processing technology, transmission and control of fluid, quality monitoring and control of the manufacturing process, advanced manufacturing technology etc. A thorough handbook-like guide to the topics.
Volume is indexed by Thomson Reuters CPCI-S (WoS).

Contents

Preface and Committes
CHAPTER 1: Surface Engineering/Coatings
Experimental Verification of Decentralized Approach for Modal Identification Based on Wireless Smart Sensor Network
Electroless Ni-P-PTFE Composite Coatings on Titanium Alloy and Their Tribological Properties
Electrochemical Behavior of Fe-Cr-Mo-C-B Amorphous Alloy Coating in HCl Solution
Effect of B4C-Yb2O3 Compound Additive on Crystallization and Sintering of Fused Quartz Ceramic Materials
Electrochemical Hydrogen Storage Characteristics of (Mg1-XZrX)2Ni (x = 0 - 0.3) Alloys Prepared by Mechanical Alloying
Comparison in Tribological Properties of YBa2Cu3OX/Ag and Bi2Sr2CaCu2OX/Ag Self-Lubricating Composites
A Study on Carbon Electro-Conductive Filler for the Epoxy Conductive Coating
A Comparative Study of Zirconium-Based Coating on Cold Rolled Steel
Ultrasonic Polishing of Electric Discharge Machined Surface Using Al2O3 Suspension
Effect of Carbon Coating on Tensile Strength of SiC Filament by Chemical Vapor Deposition
Influence of pH Value and Precipitant on Zn2SnO4 Formation via Co-Precipitation Method
Effect of Corrosive Medium on the Corrosion Resistance of FeCrMoCB Amorphous Alloy Coating
Adsorption Characteristics of Hg2+ Ions Using Fe3O4/Chitosan Magnetic Nanoparticles
Research on Vibration Grinding Finishing Technology
Preparation and Characterizations of NiTi Intermetallic Coatings
Microstructure Analysis of FeS Layer as Solid Lubrication Composite Coating Produced by Low-Temperature Ion Sulfurization
Research on the Mechanical Properties and Residual Stress of HVOF Sprayed Nanostructured WC-17Co Coatings
AOP's Modeling Research and Model Transformation with ATL in MDA
Research on Effect of Ion Nitriding Temperature on Wear Resistance of 40Cr Steel
Microstructure and Wear Properties of Laser-Clad NiCrBSi Coating
Microstructures and Properties of Plasma Surfaced NiCrBSi+WC/Co Layers
Spraying Distance Dependence of Microhardness on HVOF WC-Co Coatings
Microstructure and Abrasive Wear Properties of Plasma Sprayed Nanostructured Al2O3-TiO2-ZrO2-CeO2 Coatings
Effects of Mg Addition on Thickness of Galvalume Coating: A First-Principles Study
Investigation on High-Phosphorus Electroless Ni-P Plating Technology of Stainless Steel
Effect of TBC Residual Stresses by Uniform Growth of TGO and Typical Interface Topography
Microstructures and Strength of Hot-Rolled Mg-Zn-Y Alloys
Toughing of ZrAlN Film through Superlattice Design
Research on Strip Steel Surface Bright-Field and Dark-Field Images Fusion Method
Research of GaAs Polishing Uniformity on Non-Abrasive Cryogenic Conditions
Simulation of Inclusions Removal Influenced by Snorkel and Blowing Parameters in RH Refining
Surface Characteristics and Water Absorption of Sol-Gel Coated Impregnated Paper Pressed onto Plywood
Enhancement of Acid Resistance for Ultramarine Blue by Silica Coatings
TiC Particle Reinforced Reactive Plasma Cladding Composite Coating by the Precursor Carbonization-Composition Process
Relation between Concave Cone 3 Dimension Topography and Residual Stress in Thermal Barrier Coatings
Effects of the Microstructure and Mechanical Properties for Wear Resistant Casting Surface with Vacuum Evaporable Pattern Casting Infiltration Process
Effects of Substrate Bias Voltage on the Critical Failure Load of Cr-Al-N Coatings
Influence of CeO2 Addition on Microstructure of Vacuum-Melting WC-Ni Base Alloy Coating
Microstructure and Properties of Electrospark Deposition Coating on Die Steel
Synthesis Research of Corrosion Inhibitor Similar to Polyepoxysuccinic Acid for Carbon Steel in Sea Water
The Frictional Properties and Mechanism of Nano-Diamond/Ni Composite Coatings by Brush-Plating
Microstructure and Wear Properties of Fe-Based Alloy Hardfacing Layers
Progress of the Study on the Material and Technology of Heat Insulating Coating
Effect of Additives on Photo-Aging Performance of Polyurethane Coating
The Corrosion Behavior of Ni-P/SiC Composite Coating
Reducing Surface Defects of CrXOY Film in Mid-Frequency Dual-Magnetron Sputtering
Study on the Preparation and Property of the Ceramic Film on the LY12 Aluminium Alloy
Properties of Pulse Plating Ni-SiC Nano-Composite Coating
Analysis of Morphology and Growth Kinetics of Zn-Mn and Zn-0.2wt.%Al-Mn Hot-Dip Galvanizing Coatings
CHAPTER 2: Modeling, Analysis and Simulation of Manufacturing Processes
Motion Error Analysis of Planar Optical Waveguide Automatic Aligning and Coupling Platform
Analysis of the Relationship between Void Direction and Closure Efficiency in Forging Process
CFD Modeling of Flow Performance inside Subsonic Centrifugal Compressor
Effect of Gas Injection Condition on Fluid Flow in a Two-Strand Tundish
Research on Simulation Technology for Auto Panel in Drawing Forming Based on Autoform
Three Dimensional Thermo-Mechanical Model of Different Thermocouple Embedded Modes Analysis
Numerical Simulation and Test Research of Continuous Flexible Forming Process for the Spherical Parts
An Improved Optimization Method on the Material Mixture Ratio of Ship Stern Bearing
Research on the Heat Exchange Performance of Thermal Insulation Material and Cooling Pipe for Concrete Dam
Study of Multi-Point Flexible Floating Clamping System of Multi-Roll Stretch Forming Process
Research on a New Flexible Acceleration and Deceleration Algorithm with Continuous Jerk
Finite Volume Simulation in Porthole Dies Extrusion of Aluminum Profiles
Researches on the Ring Stiffness Condition in Cold Ring Rolling
Development of Processing Maps for 3003 Al Alloy
Study on Constitutive Model of 20CrMnTi Gear Steel in Cutting Process
Structural Topography Optimization of Engine Block to Minimize Vibration Based on Sensitivity Analysis
Study on the Forming Process Simulation of Alien Wheel
Integrated Process Planning and Scheduling Based on Genetic Algorithms
Simulation Study on Forming Process of the Inner Panel of Automobile Front Fender
Research on Feed Processing Parameters of the Cotton Comber
Distance Density Based Clustering Algorithm in Wireless Sensor Network
Design of S-Shaped Submerged Inlet
Safety Analysis for Rock Slope Reinforced by Piles with Computer Aided Design Method
Numerical Simulation of Unidirectional Solidification on Ingot of Heavy Plate Based on MARC
Finite Element Analysis of Hydro-Viscous Drive Main Transmission Shaft Using ANSYS
Algorithm for Rapid Slicing Based on Coordinate of STL Model
The Research about Machining Technique of the Parts with Complex Curved Surfaces by WEDM
Modeling and Simulation of Five-Axis Milling Machine Based on ADAMS
A Study of Springback of Sheet Metal Formed Parts Using ANSYS
Numerical and Experimental Pore Network Study on Drying of Grain Materials
Finite Element Simulation Analysis of Thin-Wall Parts Ultrasonic Vibration Turning Device
Numerical Analysis of RPC-Filled Circular Steel Tube Columns
Simulation Study on Crash Performance of Vehicle's Front Longitudinal Rails Based on Material Strain Rate
NC Ultrasonic Machining Efficiency: Neural Network-Based Modeling and Simulation
Original Industrial Application of two Numerical Models in Concasting Technology
Finite Element Design and Numerical Simulation on Non-Pneumatic Beehive Damping Tire
Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold
Tool Errors Compensation in Precision and Ultra-Precision Milling Based on the Least-Square Method
Prediction of Quality Index of Injection-Molded Parts by Using Artificial Neural Networks
3D Numerical Simulation and Optimization of Processing Parameters in Fine Blanking of Back Plate of Brake
Modelling of Surface Properties of Selected Silicate System
Numerical Simulation of Rolling Process and Microstructure Evolution of AM50 Mg Alloy during Hot Rolling Process
Three Dimensional Prediction of Microstructure Evolution and Mechanical Properties of Hot Strips
A Novel Amorphous SiGe Material Used in CMOS Device
An Advanced Strip Flatness Forecast and Simulation System for Hot Tandem Mill
Optimal Tool Sequence Selection for Semi-Finishing of Mold Cavity
Numerical Simulation of Three Dimensional Extrudate Swell Using Finite Element Method
Study on the NOx Emission during the Combustion of Low-Quality Anthracite Coal in Supercritical Pressure W-Shaped Flame Boiler
Optimaization of Single-Walled Carbon Nanotube for Adsorption of Methane
Warm Forming Simulation of Dual-Phase Steel Tailor-Welded Blanks Based on Thermo-Mechanical Coupled Method
A Software for Analyzing Structure of Amorphous Alloy
Simulation Analysis of Splat Deposition in Plasma Spray Forming
Study of Splat Particle Temperature Distribution in Plasma Spray Forming
Numerical Simulation of the Inner Flow Field of Hema-Type ATY Nozzle Based on Fluent
Error Coupling Analysis and Pre-Compensation in CNC Machining Based on the Empirical Formula
Numerical Simulation of Welding Temperature Field on Side Beam of Train Bogie
Gas Bubble Behavior Model in Adhesive Bonding Using Thermosetting Polymer
Finite Element Analysis for Wall Thickness Variation of Seamless Tube in Stretch Reducing Rolling Process
Simulation for Handing and Stability of Vehicle Based on SimulationX
Three-Dimensional Finite Element Analysis of Polymer Coextrusion through Cylindrical Channel
CHAPTER 3: Materials Forming
An Experimental Investigation on Profile Forming of an End Cap Using Al 3003 (O)
Experimental Study of Drawing Load Curves in Forming Conical Parts by Hydroforming and Conventional Deep Drawing Processes
Measurement and Analysis on Tensile Strength and Crystallinity of Vibrating Extruded High-Density Polyethylene (HDPE) Sheet
Study on Microstructure and Mechanical Properties of Mg9AlZnGdY Magnesium Alloy after T6 in Lost Foam Casting
Optimization of Forming Technique during Necking Extrusion of Drill Pipe Joints
Fabrication of Hierarchical Microporous Structures with Controlled Morphology and Topography
Application of Numerical Simulation in Stamping Process of Complex Box-Type Parts
The Analysis to the Forming Process of Welded Pipe by Non-Linear Finite Element Method
The Study and Application of Metal Injection Molding of Fe-Ni-Co Alloy
Investigation on the Formability of Tube in Hydroforming with Radical Crushing under Simple Loading Paths
Adaptive Learning of Bending Force Presetting Model in a Six-High Cold Rolling Mill
Drawing Process Analysis for Electrodeposited Nickel Coating by Finite Element Method
Study of the Structural Characteristics of Mold for Precise Injection Molding
Conformation and Activity of Sol-Gels Encapsulated Cross-Linked Enzyme Aggregates of Lipase from Burkholderia cepacia
Model Deduction of Rolling Tension Building Process
Wettability of Molten Ti on ZrO2
Structure and Properties of TC4 Alloy by Die Forming and Sintering Utilizing Hydrogenated Powder
Hot Deformation Behavior of Zn-8Cu-0.3Ti Alloy and its Flow Stress Model
Hot Deformation Behavior and Microstructure Evolution of GH625 Superalloy Tube during Extrusion Process
Study on the Properties of Magnetization Modified Sodium Silicate Sand
Effect of Phosphorus on Microstructure and Properties of Al-Mg2Si Alloys Subjected to Electromagnetic Stirring
Study on the Structure Improvement of Slanted-Guide-Pillar Core-Pulling Mechanism in Die-Casting Die
Wrinkling Identification and Wrinkle Distribution of a Tube in Hydroforming with Radial Crushing
Study on the Rules and Effects of Wear on Die Service Life in Steel Synchronizer Gear Ring Forging Process
The Effect of Anisotropy on Spring-Back of CK67 Steel Sheet in L-Dies Bending Processes
Back-Stepping Design Research of Spline Die Based on Cold-Rolling Forming
Numerical Simulation and Optimization of Drawing for Shallow Tapered Surface
CHAPTER 4: Materials Machining
Study on Influencing Factors of the Seaming of Knitted and Woven Fabrics
Thermomechanical Load Study on FGM Clad Hot Forging Die under Mechanical Press
Research on Thermocouple Embedded Position for CC Mould Copper Plate with High Casting Speed
Defect Recovery and Control in Heavy Forgings by Two Times Upsetting and Stretching Process
Study on Mathematical Model of High Speed Milling Force for Plastic Mold Steel 3Cr2Mo
Experimental Study on the Cutting Temperature with Micro-Texturing Self-Lubricated Tools
Fabrication of SiCp/Cu Composite by Powder Injection Molding
Experimental Study on High-Speed Milling of SiCP/Al Composites
Edge Drop Control Technology of 4-Hi Tandem Cold Rolling Mill on the Premise of Considering Roll Grinding Accuracy
A Study on Novel Gas Atomization Device for Preparing Ultra Fine Metal Powder
A New Method on Choosing Tool Materials at High Speed Machining
Effects of Rotating Electromagnetic Field on Solidification Microstructure of ZA27 Alloy
Research on the Machining Methods of UHMWPE Fiber Reinforced Composite Laminates
Studies on Diamond Brazing Process
Studies on High Efficiency Diamond Trimming Saw Bits
Numerical Simulation and Experimental Study on Warm Forging Process of Half Axle Bevel Gear
The Study on High-Temperature Oxidation Law of 20CrMo Steel in the Regenerative Heating Furnace
The Discussion of {111}∥ND Formation Mechanism
Austenite Phase Transformation of Thermal Analysis
Temperature Field Simulation of Air Cooling Condition 40Cr ANSYS
Assessment of Factors Influencing Tool Wear on the Machining of Nimonic C-263 Alloy with PVD Coated Carbide Inserts
The Use and Grinding of the New Configuring Finishing Hob
Study on Cutting Force of Diamond Cutter in Special-Shaped Stone Processing
An Experimental Investigation of the Laser Milling Process for Polycrystalline Diamonds
CHAPTER 5: Welding & Joining
Studies on the Mechanical Property of Ring Nugget Formed in Sheet to Tube Joining
Modeling of Resistance Spot Welding Process Using Nonlinear Regression Analysis and Neural Network Approach on Galvanized Steel Sheet
The Prelimary Study of the Welds between Mg and Al by Friction Stir Welding
Tensile Properties and Strain Hardening Behavior of a Friction Stir Welded AA2219 Al Alloy
Technique of Laser-TIG Hybrid T-Shape Joint Welding of Titanium Alloy
Experimental Study on Composites with Single-Lap Countersunk Head Bolt Joints
Microstructures and Properties of FSW Joints of AZ31B Mg Alloy
Determination of Optimal Recrystallization Annealing Temperature on Structural Hot Dip Galvanized Steel Sheets
Chapter 5: Welding & Joining
TZM Alloy TIG Welding Process and Microstructure of Welded Joints
Study of Laser Cladding Novel Co-9Al-7.5W Superalloy on 304 Stainless Steel
The Interlayer Designation for ZTM Ceramics and Fibre Joining
Effect of Magnetic Field Frequency on Microstructure and Properties of AZ31 Magnesium Alloy Welded Joint with GTAW
Effect of Ca on Grain Size and Toughness in CGHAZ of C-Mn Steel
Completely Inelastic Collision to Confirm Maximum Punch Pressure Force of Cold Pressure Welding
Residual Stress Characterization of A7N01-T5 Welds for High Speed Train by X-Ray Diffractionand Verification
Study of Type 316L Stainless Steel TIG Welding with MoO3 Powder
Evaluation Study on Angular Distortion and Residual Stress of Stainless Steel Pulsed TIG Weldment
Microstructure and Mechanical Performance of Ultrasonically Brazed Joints of High Fraction Volume of SiC Particulate Reinforced Aluminum Matrix Composites
Electrode Lifetime in Spot Welding Galvanized Sheet with Insert Material
Effect of Physical Simulation Thermal Parameters on Microstructure Transition and Property Variation of Boron Steel
The Chemical Reactions in Solution Synthesis of Aluminum Alloy Brazing Fluorate Flux
The Effect of Nano-Cu Particles on Mechanical Properties of Micro-Joining Joint with Lead-Free Solder
Reaserch on Measurement of Residual Stresses in Flash-Butt-Weld Rails Using X-Ray Diffraction
Study on Fatigue Crack Growth Rate of Welded Joint of Duplex Stainless Steel
Liquid Phase Separation of Cu-Fe Weld Metal of Manual SHS Welding
Study of Silica-Titania Mixed Flux Assisted TIG Welding Process
Interfacial Reaction of Alumina Ceramics to Mild Steel Braze Joint
Analysis on the Residual Stresses in the Aluminum Alloy Friction Stir Welded Joints
Resistance Spot Welding between Titanium and Stainless Steel with an Aluminum Alloy Insert
Study on Performance of Inertia Radial Friction Welding of Copper-Alloy to 35CrMnSi Steel
Crack Failure Analysis of Q235B Welding with 304 Austenitic Stainless Steel of Tube and Shell Condenser
Effect of Heat Input on Toughness of Deposited Metal at -40οC of Self-Shielded Flux-Cored Wire
Documentation and Analysis of Sustainable Design and Apllication of Tanggam System in Malay Traditional House
Research and Development of High Energy Pulse Precision Cold-Welding Technology
The Friction Interaction Mechanism of Welding Seam Identifying Based on Force Sensing
Effects of Nd: YAG Laser Welding Parameters on the Microstructure of 21% Cr Ferritic Stainless Steel
Study on the Joining Characteristics of Diffusion Welding Lap Joint with Various Temperatures between Aluminum Alloy and Stainless Steel
CHAPTER 6: Mechanical Behavior & Fracture
A Study on Tensile Mechanical Properties of Bamboo Plywood
A Useful Curve Fitting Method for Concrete Uniaxial Compressive Experiment Data
Fatigue Analysis of the Pipeline Robot's Swing Rod
Investigation on Nonlinear Constitutive Relationship for a Honeycomb Sandwich Composite
Determination of Fracture Toughness and K-R Curve for 2524-T3 Aluminum Alloy
Study on Fatigue Crack Growth Model of Attachment Lug Subjected to Oblique Pin-Load
Hot Deformation Behavior and Fracture of As-Extruded 7075 Aluminum Alloy
Simulation of Crack Tip Plasticity Using 3D Crystal Plasticity Theory
Analysis of the Generation Cause of Scale Shelling Defects on Running Surface of 60kg/m U71Mn Rail
Vacuum Forming Refrigerator Inner Liner Structural Optimization
Surface Crack Search and Marking on Materials with Regional Phase Unwrapping Technology
Influence of Plastic Deformation on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy
Fracture Analysis of Pipe Sleeve on Extrusion Flare-Less Pipe Joints for Aircraft Hydraulic Pipe
Material Factors Analysis of the Cracking in 0Cr12Mn5Ni4Mo3Al Stainless Steel Pipe Sleeve on Aircraft Flare-Less Pipe Joints
Study on Casting Speed and the Speed of on-Line Mould Width Adjustment of Slab Continuous Casting
A Method of Reducing Volatile Compounds in Polypropylene Packaging Materials
Low Cycle Fatigue Behaviour of GX12CrMoVNbN9 -1 Cast Steel at Room Temperature
Experimental Investigation of Fretting Fatigue of Train Axles under Rotating Bending
Experimental Studies on J-Integral of Welded Buried High-Density Polyethylene Pipes
Influence of Aging on Creep Rupture Properties of Heat Resistant Steels for Steam Turbine Rotors of Thermal Power Plants
The Comparison of Fractal Dimensions of Cracks on Reinforced Concrete Beam
Study on Constitutive Relationship of Fe-36Ni Invar Alloy
The Experimental Study on Sensitivity of Hydrogen Embrittlement of 20Cr2Ni4A High-Strength Steel Cleaned by Ultrasonic and Deruster
Study on Fracture Energy of Cement Stabilized Aggregate
Study of Shear Fracture Behaviours on 6061 Aluminum Alloy
Study on Crack Prevention for Concrete Rapid Construction
A New Constitutive Model for Anisotropic Sheet Metal with Isotropic Ductile Damage
Construction of a Finite Element Multiresolution Method Based on the Second Generation Wavelets
Establish Fatigue Life Mechanism for Self Run Bushing By Engineering Analysis Methods
A Model for the Effects of Strain Rate and Temperature on the Deformation Behavior of Ultrafine-Grained Metals
The Development of Auxiliary Sets in Novel Cold Roll Forming Line - Continuous Mini Stretching-Bending Straighter and Roller Punching System
Analysis of Axial Subcritical Crack Propagation in X80 Pipeline using Micro-Mechanical Model
Variational Problem of Unloading Fractured Rock Mass
Dynamic Simulation of Cycloid Wheel at Two Support Points of Needle Gear pin for New Three-Gear Pin-Cycloid Driven Speed Reducer
CHAPTER 7: Material Design of Computer Aided
Effect of Chlorine on Combustion Process of Pulverized Coal in Tuyere Zone
Study on CH4 Adsorption onto the Surfaces of Perovskite ABO3 ( A=La, Ba; B=Zr, Co, Ce) by Density Functional Theory
Analysis in Atmospheric Corrosion Behavior of Bainite Steel Exposed in Offshore Platform Based on the Artificial Neural Network
Temperature Field Simulation of Flame Deformation Correction for Thin Plate
Study on Injecting Forming Technology of Railway Locomotive Bearing Retainer
Dynamic Compressive Behavior of Granite under Active Confinement
Design and Fabrication of Blood Drawing Device
Surface Modeling Design and Temperature Field Analysis about Air Intake Cover Based on Pro/E Software
CHAPTER 8: Tooling Testing and Evaluation of Materials
Electro-Conductive Property of Polymeric Composite under Impact Loading Using a Modified SHPB
Duplex Stainless Steel Microstructure Display and Microscopic Study
Study on Flux-Pinned Interaction between High-Temperature Superconductor and Permanent Magnet and Flux-Pinning's Self-Stability
Mechanical Test on Pipe Collapse under External Pressure
Biomaterial Impedance Analyzer Based on Digital Auto Balancing Bridge
Evaluation Method for Fabric Non-Iron Pleat Plasticity
Determination of Exciting Power and Saturation Characteristics for Dual Laminated Core Models
The Equipment on High Sensitive Test of Infrared Directional Emissivity of Materials
Design and Experiment of Electromagnetically Induced Acoustic Emission for Metal Crack Detection
Research on the Sorption of Anticorrosion and Antiwear Addtives on Surface of Axletree
Determination Methods of the Minimum Safety Thickness of Acrylate Waterproof Membrane
An Experimental Setup to Test Thermal Contact Conductance Across Solid/Solid Interface
Realization and Analysis of Bending Fatigue Strength Test for Gears under Random Loading
Damage Evaluation of 16Mn Steel in Tensile Test
Infrared Thermography Non-Destructive Testing of Composite Materials
CHAPTER 9: Microwave Processing of Materials
Microwave Joining 95-Al2O3 Ceramics Used Al-Si Alloy as Interlayer
Experiment Study on the High-Phosphorus Hematite Carbothermal Reduction in Microwave Field
Influence of Hoop Coefficient on Dynamic Response of Railway Bridge Protective Frame under Impact Load
Experiment Research on Combustion of Microwave Modified PC
Microwave Assisted Solid State Reaction Synthesis of Complex Amino Acid Complexes of Mn (Ⅱ)
Microwave-Irradiated Preparation of Super Absorbent Resin by Graft Copolymerization of Starch and Acrylic Acid
Effect of Ultrasonic Wave on Lentinan Extraction
Viscoelastic Characterization of Microwave Drying Nature Rubber
Hybrid Control for Isolation and Energy Dissipation Systems of Flexible Pile
Mechanism Study on the High-Phosphorus Hematite Carbothermal Reduction in Microwave Field
CHAPTER 10: Laser Processing Technology
Effect of Laser Surface Melting on Structure and Properties of a High Speed Tool Steel
Microstructure Research of Magnesium with Laser Surface Cladding by Al-Si Alloy
Direct Writing Micro/Nano Structures on PZT Wafer by Laser Micromaching
Research on the Application of DVD Pick-Up Head in Three-Dimensional Optical Storage
Development of Numerical Model and Coupled Thermal/Mechanical Analysis in the Laser Transmission Joining of PET and Stainless Steel
Influence of Re-Melting Technology on Properties and Microstructures of Ferrous Matrix Composites Reinforced with Tungsten Carbide Particle
Patterning of ITO on Glass with Two-Step Using Excimer Laser and Wet Chemical Re-Etching
Development of Porous Scaffolds Using Selective Laser Sintering of Polylactic Acid/ Hydroxyapatite for Bone Tissur Engineering
Study on Thermal Fatigue Resistance of Non-Smooth Cast Iron Treated by Laser Surface Alloying of CrNi Powders
Characteristic of Laser Texturing Surface Aided with Abbott Curve
Laser Repair Cladding of K418 Ni-Base Superalloy by CoCrNiW Powder
Study on Anti-Corrosion of the HAZ of 30CrMnSi Treated by Laser Remelting
Surface Layer Properties of Sintered Ferritic Stainless Steel Remelted and Alloyed with FeNi and Ni by HPDL Laser
Laser Cladding of Al+nano-Al2O3 Powder on ZM5 Magnesium Alloy
Optimization of Laser Transmission Joining Process between Different Thermoplastics using Response Surface Methodology
Transverse Superplastic Deformation of Laser Welded Ti-6Al-4V Sheet
CHAPTER 11: Theory and Application of Friction and Wear
Influence of Silica Fume/Nanosilica on the Strength and Microstructure of Phosphoaluminate Cement
Tribological Testing Method between Knitted Fabric and Skin in Wet States
Experimental Study on the Tribological Properties of Water-Lubricated Rubber Bearings
Tribological Behaviors of Nanocrystalline Nickel Coatings under Lubricated Conditions
A New Method of Numerical Differential and Time Domain Integral Based on the Analysis of Vibration Response
Cyclic Spectrum Analysis on Rolling-Element Bearing with Inner-Race Point Defect
The Effect of Rail Material on Wear Behavior of Wheel and Rail
Inhibition Behaviour of a Mixed Additive upon Zinc Electrowinning from Sulphate Solutions Containing Germanium
Computer Analysis of Radar Graph Fractal Method for Wear Debris Contour
Investigation of Grease Lubrication Effects on the Fretting Wear Behavior of Ball Bearings
A Study of (N-octylic acid)-N-Quinazolin-4-One Methylester as an Oil Additive
A Two-Disk Test Rig for Researching the Damage Behavior of Rolling/Sliding Contact Surfaces under Extreme Conditions
A Shakedown Limit under Hertz Contact Pressure
Key Problems in Study on Fretting Fatigue of Aluminum Alloy
Research on Static Characteristics of Deep/Shallow Pockets Hybrid Bearing under Laminar and Turbulent Mixed Regimes
Influence of DC Steady Magnetic Field on Friction and Wear Characteristics of Friction Pair of High-Speed Steel / 2Cr13 Stainless Steel
Tribological Performances of FeS Solid Lubrication Duplex Layer under Liquid Paraffin Oil with n-Al2O3 Lubrication
CHAPTER 12: Dynamic Mechanical Analysis, Optimization and Control
Analytical Model of a Simple Supported Beam with Variable Section Subjected by a Moving Load
Study on a New Series of DNA Dodecahedral Links
Flapping Mechanism Design and Aerodynamic Analysis for the Flapping Wing Micro Air Vehicle
House Renovations and Extensions in Malaysia: An Investigation of Mechanical Changes and Modification of House in Klang Valey, Malaysia
The Modal Analysis of Roller Chain Drives
Decentralized Semi-Global Stabilization of Large-Scale Nonlinear Systems with Mixed-Order Nonlinearities
Analysis of Stress Response for the Super High Rise Double-Tower Connected Structure with the Trusses of Changing Rigidity
Analysis on High-Speed Sampling Device with Big Interior Force
Simulation and Fuzzy Control Strategy Analysis on 4WD Hybrid Electric Off-Road Vehicle
Review and Prospect on Dynamic FE Model Updating Methods of Footbridge Structures Based on Ambient Excitation
Non-Linear Finite Element Analysis of Contact-Impact between Drill String and Wellbore under Air Drilling
Dynamic Stiffness Identification of Bolted Joints
Research on Topology Optimization Method for Continuum Structure under Geometric Constraints
The Analysis of Radial Magnetic Bearing's Magnetic Field in Active Magnetic Bearing Electric Spindle Unit
Haptic Control for Minimally Invasive Robotic Surgery
The Method of Parametric Design of Mixing Blades Based on Subdividing Functions
Optimization of Concrete Open-Loop Pumping Displacement Control Parameters under Variable Loads
The Finite Element Model (FEM) Updating of Mirror Frame System Based on Response Surface Method
Nonlinear Primary Vibration of Circular Sandwich Plates and Modal Analysis
Influences of Semi-Rigidity of End-Plate Joints on Structures
Analysis of the Mixed Control System of Damper and TMD
Stress Spectrum Analysis on Steel Structure of Gantry Crane
Dynamic Optimization Design of Stochastic Finite Element
Variability of WPT-Based Dynamic Identification of a Suspension Bridge under Changing Temperature, Wind and Traffic Conditions
CHAPTER 13: Thermal Engineering Theory and Applications
Experimental Study on Ammonia-Water Bubble Absorption in External Magnetic Field
Analysis of the Heat Transfer Coefficients on the Top of a Marine Diesel Piston Using the Inverse Heat Conduction Method
Research on the Local Upwind DQ-Lagrange Method for Solving the Flow Field in Labyrinth Seal
Influences of New Electrical Material on Transient Heat Transfer in IMCCR
Reviews of Studying on Thermal Management System in EV/HEV Battery Pack
The Analysis on Circulating Fluidized Bed Boiler Heat Tube Failure
Design of Vacuum System of Steam Jet Bursting Unit for Chestnut Shell
Study on the Porous Media Used in Numerical Simulation of Temperature Characteristic for Isothermal Chambers
Optimization of the Cooling Channels in a Journal Bearing Based on Thermohydrodynamic Analysis
Integrated Optimal Design of Ducted Propeller Based on DOE
SABER-Based Simulation for Compact Dynamic Electro-Thermal Modeling Analysis of Power Electronic Devices
Compositional Design of Ceramic Extrusion Die Materials Based on the Residual Stress Analyses in the Die Manufacturing Process
Numerical Simulation of Body Heat Transfer Coefficient Test of a Railway Vehicle
CHAPTER 14: Precision Manufacturing Technology and Measurements
Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al
Study on Dynamic Minimum Thickness of Cut by Nanoscratch Testing
Detection Status of Surface Defect for Precise Optical Element
Chapter 14: Precision Manufacturing Technology and Measurements
Research on Progress of Micro Processing Technology
Marine Authigenic Deposits Mineral - New Fields for the Development of Rare Earth Resources
A Method of Double-Side Displacment-Rotation Flat-Lapping with Solid Abrasives
Ultra-Precision Shaping and Polishing Experiments in Nanoparticle Colloid Jet Machining
A Study on Surface Quality of GaN with CMP Polishing Process
Experimental Investigation on the Influence of Tool System Imbalance on its Vibration Characteristics
The Computational Analysis of Hanging-Weight Method Used in High Speed Rail
CHAPTER 15: Waste Engineering and Management
A System Dynamics Model for Water Quality Management - Waste Load Allocation
A Watershed's Environmental-Economic Optimization and Management Framework Based on Environmental Carrying Capacity
Physico-Chemical Characters of Pyrolysis Oil Obtained from Sewage Sludge
The Effect of MgO-Al2O3 Spinel on Refractory Bricks Made from Al2O3-Cr2O3 Slag
Preparation of the Al2O3-ZrO2-C Sliding Nozzle Using Recovery Refractory and Improvement of its Performance
Removal of Phosphate from Aqueous Solution by Using Red Mud
Production of Si-Al-Fe Alloy with Carbothermal Reduction of Coal Fly Ash
Research of the Excellent Engineers' Quality Training
Uncertainty Analysis of Thermal Protection by Microencapsulated Phase Change Micro/Nanoparticles during Hyperthermia
Influence of Operation Procedures on Vicat Softening Temperature of Thermoplastic Materials
The Influence of Hadifield Steel-Bonded TiC Preparation Process on Microstructure and Properties
Simplified Analysis Research on Ancient Chinese Timber Structure
Various Cooling Methods to Prepare Single Polytetrafluoroethylene Composites
Study on the Control Technology of Piezoelectric Transducer Assembly
Exploration on Methods of Making PAFC Using Coal Gangue
Study of Modification of High Temperature Melting Compound Steel Slag-Fly Ash
Optimization of Underwater Body's Shape
Performance Analysis of Coupled System of CO2 Transcritical Heat Pump and Rankine Cycle
Study on Papermaking Processes Wastewater Treatment
Using of Different Type Cement in Solidification/Stabilization of MSWI Fly Ash
Influence of Zeolite NaA on Thermogravimetric Behavior of Sodium Alginate for the Purpose of Processing Plastic Wastes
Study on Parameter Optimize of High-Speed Mobile and Matlab Simulate
Mechanical Method for Recycling Original State Aggregate from Demolished Concrete
Sulfonated Chemi-Mechanical Pulp of Cotton Stalk and Bleaching
The Influence of Cutting Conditions on Friction and Wear Properties of PEEK, CF/PEEK and GF/PEEK Composites Using PCD Tools
CHAPTER 16: Mechanical Dynamics and Its Applications
Study on Dynamics of Electrochemical Degradation for Chitosan
Tool Wear Measurement of Ball-End Cutter Based on Shape Mapping
Optimal Design for Partial Inertia Force Cancellation in Ultra High Speed Pressing Machine
Hull Design and Structural Analysis of an Underwater Robotic Vehicle
Subdivision of Machining Stable Region Based on Vibration Frequencies
Optimization of Underwater Cavity's Shape
Test Method for Rheological Behaviors of Magnetorheological Grease Based on Coaxial Cylinder Shear Mode and Rheometer
CHAPTER 17: Vibration, Noise Analysis and Control
The Optimization of a Middle-Sized Passenger Car Steering Wheel Vibration at Idle Speed
Nonlinear Dynamic Behaviors of an Imbalance Rotor Supported on Fixed-Tilting Pad Journal Bearings
Finite Element Analysis on Axial-Torsional Coupled Vibration of Drill String
Application of Ant Colony Algorithm in Fault Diagnosis of Roller Bearing
Acoustic Radiation Simulation of Marine Sliding-Thrust Bearing Shell Based on SYSNOISE
Experimental Identification for Seals Rotordynamic Coefficients Based on Double Plane Balance Method
Study on Dynamic Characteristics and Dynamic Response of Woodworking Four-Side Planer
Performance Testing for Bamboo Charcoal Knitting Fabrics of Different Structures
Effects of High Density Ultrasonic Field Coupling on the Microstructures and Properties of Al-Si Alloy
Identification of Acoustic Emission Signals Based on Multi-Resolution Correlation Filtering
Design and Test of Silent Chain Including Silicon Fluorine Rubber Link Plate
Fault Diagnosis based on Wavelet Analysis for Bearings under Low Rotating Speed
The Trial Research on Suppressing the Chatter by Variable Speed Milling
The Green's Function and its Oscillatory Properties for a Single Branch Structure of a Pinned Beam-Rod System
Piezoelectric Equation and Two Types of Piezoelectric Sensors Model
Factorial Hidden Markov Model Recognition Method Based on Multi-Channel Information Fusion
Experimental Research of Characteristics of Fluid-Induced Force in Eccentric Seal
The Research of Civil Structural Damage Identification Based on Lifting Wavelet Entropy Index
Modal Analysis of the Iced Transmission Line Based on Three-Dimensional Curved Beam Element
A Numerical Analysis of Infilling-Wall Multi-Functional Vibration Reduction
The Testing and Improving of Acoustic Performance on Muffler
Displacement Governing Equations of Moderately Thick Cylindrical Shallow Shells by Transverse Shearing Deformation and the General Solution
Displacement Fundamental Equations and Analysis of Governing Equations of the Circular Moderately Thick Shallow Spherical Shells
Vibration and Noise Monitoring of Ceramic Motorized Spindles
The Denoising Method for Transient Speed Signal of Diesel Engine
Test Verification of a Design Method for a Fluid Viscous Damper
A Study of the Screening Efficiency of a Probability Sieve Based on Higher-Order Spectrum Analysis and Support Vector Machines
Vibration Cosine Solutions of Free Orthotropic Rectangular Plates on the Elastic Half-Space
Study on Trispectrum Slices for the Magnetorheological Damper
A Study on Relevance between Distortion of Distributed Mode Loudspeaker and Characteristic of Sound Panel
Modal Analysis of Water-Lubricated Rubber Stern Bearing Based on ANSYS
Hybrid Multi-Mode Input Shaping Suppresses the Vibration of a 3-DOF Parallel Manipulator
Combination of Wave Atoms Shrinkage with Bilateral Filtering for Oscillatory Textural Image Denoising
Numerical and Experimental Studies on Aerodynamic Characteristics of Pneumatic Exhaust with Perforated Panel Muffler
CHAPTER 18: Mechanical Reliability Theory and Engineering
An Analytical Solution for Stress and Displacement in Casing-Cement Combined Cylinder under Non-Uniform Loading
The Effect of Anisotropy of Medium on the Stress State around a Borehole
Study on Reliability and Safety of Automatic Speed Control System Based on Dual Redundant Model
Based the GM Reliability on the Application of Mechanical Product Evaluation
Reliability of Cermet Cladding Parts Based on the Failure Tree Series
The Study of Fuzzy Reliability of Concrete Durability after Corrosion of Steel-Bars
Reliability Assessment of a Certain Diesel Engine with Multi-Parameter Degradation Based on SVDD
Research on Multi-Excitation Source United Controlling Test Method Based on Distributed Actuation
Stress Conditions for Surface Analysis of Butyl Rubber Lining
An Approach to Fatigue Reliability Analysis Based on the Hybrid Model of Probability and Non-Probability
Local Monte Carlo Simulation for the Reliability Sensitivity Analysis
Important Sampling for Structural Reliability Based on Radial Basis Function Neural Network
Study of Sequential Sampling Method for Weibull Distribution
Analysis of Latest Application Movement of Laser Surface Heat Treatment Technologies
Experimental Study on the Durability of Square-Section Columns Externally Wrapped with Carbon Fiber Reinforced Polymer
Maximum-Likelihood Estimation of the Parameters with Constraints in Step-Stress Accelerated Life Tests
Design Improvement through Reliability Analysis of Belt-Type CVT Systems for Scooters
Dynamic Reliability Analysis of Drill String System in Deep & Ultra-Deep Well Based on the First Excursion Failure Criterion
CHAPTER 19: CAD/CAM/CAE
Research on the Method of Class_A Surface Reconstruction in Automotive Body External Panel Design
Web-Aided Design for Dimensioning Power Cables
Simulation and Analysis of Frame Structure of Military Transport Truck
A Research of Parting Design Frame of Telecontrolled Boat Hull by UG on Case-Based Reasoning
Integration of Moving Least Squares Method and Multilevel B-Spline Method for Scattered Data Approximation
Automatic Generation of the CAE Parametric Model from the CATIA Model for an Aircraft Hydraulic Tube Structure
Parametric Design of Roller Oscillating Follower Disc Cam on UG
The Geometric Modeling of Pieces in Virtual Milling Simulation
Study on Mechanism of Hammer Bit and Rock Interaction in Geophysical Prospecting Percussion Drilling
Optimization of Cooling System of Linac Collinear Load
Simulation of Dynamic Carry-Loading Characteristics for Vehicle Body of High-Speed Train
Study on Hydraulic Circuit Simulation Based on MSC·EASY5 for the Arm of Excavator
Function Design of PDM System for Small-Medium Scale Pressure Vessel Manufacturing Enterprises
Research Status and Countermeasure of Temperature Rise of Hydraulic Dynamic and Static Bearing
Study of FPBS Model for Conceptual Design of Mechanical Product
Finite Element Analysis on Thermal Characteristic of the Headstock of NC Machine Tool
Structure Optimization Design of Drum of High-Speed Tire Test-Bed
Powder Mixed EDM Stirrer Designing and Simulation
An Automotive Die Face Compensation Method Considering Blank Thinning and Die Deformation
Study on Fengdu Second Yangtze River Bridge the Cable Anchorage Structure in a Girder Transfer Mechanism
Random Vibration Analysis of the Deployable Structure for Satellite Antenna
Boundary Conditions for Numerical Simulation of Diesel Water Jacket
Application of Computer and Network Technology in Welding Power Source Design
A New Approach to Integrating Algorithm Modules in CAD Software Applications
Modeling of Heat Transfer in Spent-Nuclear-Fuel Container during Forced-Chilling Process
Different Finite Element Software on Electric Field Analysis of Magnesium Electrolysis Cell
Retrieval Algorithm of Images and its Applications in Recognition of Metallographic Pictures
Research on Vehicle Ride Comfort Based on Virtual Prototyping Technology
Application of Computer Simulation Technology in the Analysis for Gilling Machine Structure
Mining Mobile Telecommunication Services Using Apriori Algorithm
Coal Face "Three-Machine" Selection and Matching Knowledge Modeling Based on Ontology
The MultiAgent Forming Stress Analysis and Design of Cold Bending Centre Sill
Research on Calculation and Smoothing of Grinding Wheel Profile for Machining Screw Rotor
Design and Implementation of Virtual Royal Garden in Northern Song Dynasty with Stereoscopic Display
Research on Ship Parts Nesting with Immune Ant Colony Algorithm
CHAPTER 20: Product Design and Development
Finite Element Analysis and Structural Improvement of S195 Diesel Engine Connecting Rod
The Numerical Simulation and Optimal Design of Nozzle Jet for Gas-Fluid Two Phase Flow
Design and Implementation of an ATmega8L Microcontroller Based Adjustable Closed Loop Speed Controller of a DC Motor
Finite Element Analysis and Structural Improvement of Farm Engine Connecting Rod
Design and Simulation of the Torsion-Free-Body between the Vehicle Oil Can and the Chassis
3D Design on Eddy Current Retarder
FEM Analyses on Stress and Deformation of a C-Type Expansion Bolt
The Optimum Design of Mechanism Scheme Based on the Functional Analysis
Development Design of New Age Children's Toy
Dynamic Characteristics Analysis of High Water-Based Large Flow Safety Valve
Digital Design of Children's Battery Car
Research on Component Attributes in Domain Problem Solving
Symmetric Beauty: Press Based on Reconfigurable Toggle Mechanism Driven by Pneumatic Muscle
Optimization of Parameters for Children's T-Shirt Neckline
Effect of Bacteriostats on Cells Growth and Contamination-Resistant Capability of Rhizobium Inoculants
The Structure Design and Analysis of Predigest Laser Combine Bind and Extend Bind Flat Roof
The Fast Measuring and Processing Method of 3D Measuring System in Reverse Designing
Research on Collaborative Design System of Mobile Crane
Innovative Design for Supply Mode of Steam in Drying Cylinder
Human Dimension and its Application in Product Design
Study on the Information Coding Design Humanity of Man-Machine Display Interface
The Design of Moving Mongolia Yurt
Discussion on the Transportation Speed of the Horizontally Vibrating Conveyor
Study on Layered Fracturing String for Deep Compact Gas Reservoirs
Application and Design of Plunger Pump Lifting Viscoelastic Fluid
Conceptual Design Methodology of Mechatronic Systems
Popular Evolution and Styles Reusability of Platform Shoes
CHAPTER 21: Engineering Optimization
Optimization of Extraction Conditions of Active Constituents from Siraitia Grosvenorii
Dynamic Analysis on Steel Tower of Vertical Axis Wind Turbine
The Optimization of Flexible Job Shop Scheduling Problem Based on Improved Dual Coding Non-Dominated Sorting Genetic Algorithm
Hydrodynamic Analysis of Oil Storage Vessels for National Strategic Petroleum Reserve
The Reflector Bracket Mirror Structure Optimization and Design of the IR Warring System
The Project Research for Optimal Scheduling Based on Particle Swarm Optimization
View Angle Characters of the Chiral HAN-Mode LCD
APDL-Based Optimization of the Boom of Luffing Jib Tower Cranes
An Effective Resolution Algorithm for the Two Dimensional Bin Packing Problem
Structural Optimization on the Hydraulic Press by FEM and Mathematical Programming Algorithm
The Extractive Technique of Active Constituent in Six Insecticidal Plants
Analysis of Flameproof Diesel Performance
Optimization of Earth Observation Satellite System Based on Design of Experiment and Surrogate Model
Topological Optimization Design for Pedestal of Horizontal Rocket Rivet Fixture
Numerical Simulation of Internal Flow in Stamping and Welding Multistage Centrifugal Pump
CHAPTER 22: Measure Control Technologies and Intelligent Systems
The Lag Comparator of the Two-State Modulation Technology to the Development of a New Type of Dynamic Electronic Load
Harmonic Detection Based on Improved Adaptive Method and its Performance
2-D Circle Measurement System for Small Rule Parts Based on Machine Vision
Design of a Fuzzy Control System for Integrative Irrigation in Field
Design of Multi-Channel Data Acquisition System Based-On DSP
Measuring Method for Differential Sensing Gratings Modulated with Matching Grating
Digital Control Hydraulic Variable Pump Based on Mechatronic-Hydraulic-Air Integration Driven by Compressed Air
Predictive Controller Design and Simulation of Time-Varying System Based on IGPC
Algorithm Considering Signal Correlation for Denoising of the Magnetic Flux Leakage of Wire Rope
Design and Implementation of SPI Communication Based-On FPGA
Research and Application on Controllable Starting Circumstance of Trough and Flexible Rubber Transfer
Computation and Analysis of Disk-Type Magneto-Rheological Fluids Brake
Digital Signal Processing for Open-Loop Fiber-Optic Gyroscope
New Locating Method of Spatial Target with 3-R Range-Only
Virtual Reality Based Auxiliary Robot System for Liver
The Fluorescence In Situ Hybridization Approach Applied in the Study of the Denitrifying Bacteria on Nitration Tank of the Metal Membrane Bioreactor
Energy Efficient Rout Algorithm Based on Ant
A Simple Calibration Method for the Relationship of the Eye-in-Hand of Robot Vision
The Analysis and Improvement of S-MAC Protocol for Wireless Sensor Networks
Research on Algorithm of Detection of Weld Image Edge Based on Lines Positioning Theory
Computerized Simulation on Energy Saving Characteristics of Variable Displacement of Double Action Vane Pump
The High-Precision Relative Rotational Speed Measurement System Based on Magnetic Signal and Spectrum Correction
Study on PIDNN-Based Flow Control in Layered Water Injection Technology in Oilfield
A Design of Sheet Metal Handing Manipulator Based on PLC
A Novel Dimension Measurement System of Hot Large Open Die Forgings
Research and Development of Embedded CNC System for Drilling Based on ARM
The Research on Snake-Like Robot Design Based on Single Chip Microprocessor
Multi-Class SVMs Based on Priority for Computer-Aided Diagnosis of Lung Nodules in CT Images
Study on the Soil Slope Stability Based on the Support Vector Machine
Fluorescence Spectroscopy as a Potential Monitoring Tool for Recycled Water Systems
Robust Control of Variable Pitch Wind Turbines Base on Linear Matrix Inequality
CHAPTER 23: Mechanical Control and Information Processing Technology
Study on Control Strategy of Train Automatic Speed Control System
Design of Open Motion Control System in Fully Electrical Plastic Injection Molding Machine
A Maximum Power Point Tracking Algorithm Based on Fuzzy Neural Networks for Grid-Connected Photovoltaic System
Based on Synchronized Timed Petri Nets for Emergency Vehicle Preemption Systems
A Novel Transformer Fault Diagnosis Method Based on Gross Error Examination
Research Progress of Wavelet Analysis in Flow Structure Characterization
An Improved H.264 Codec Algorithm Based on Regions of Interest
Research on a Method and Mechanism of Ocean Current Sensor Calibration
A Collision Avoidance System for Dam Concrete Construction Based on GPS and GIS
Study of Gas Injection System for EBIT Facilities
Experiment Research on Control Method and Mathematic Models during Energy Storage to the Double Function Flywheel System
The Study of the Dynamic Testing System of Modern Measurement and Monitoring Platform
Design of Live Video Monitoring System Based on DM642
A Fault-Tree Based Intelligent Fault Diagnostic System of Heavy CNC Equipments
Research of Servo System for WEDM Based on DSP
Development of Energy Saving Control System for Street Lamps Based on SCM
Rotation Shaft Twist Angle Measurement Based on Moiré Fringe and Error Analysis
Design of Plasma Cutting Tracking Device for Spiral SAW Pipe
Design and Implementation of Automatic Drainage in Coal Mine
CHAPTER 24: Transmission and Control of Fluid
Numerical Simulation of Combusting Flow Field in Ram-Compressed Rotor Chamber
Ratio Control Strategy for an Electromechanical Continuously Variable Transmission Based on Engine Models
Numerical Simulation and Experimental Research on a Splash-Proof Water Injector
Research on Indirect Stator-Quantities Sliding Model Control for Induction Motor
Design and Research of PMSM Control System Based on FPGA
CHAPTER 25: Quality Monitoring and Control of the Manufacturing Process
Analyses of Influencing Factors of Pore Formation during Resistance Spot Welding of Magnesium Alloy
Modeling Variation Propagation Based on State Space and its Application to Dimensional Variation Prediction in Shipbuilding
Key Technology of Automatic Ultrasonic Testing System for Corkscrewed Steel Pipes
The Design of Control System of Rapid Prototyping Machine for Ceramic Parts Based on SIEMENS S7-200
Centering Performance Analysis of Static Balancing Measure for Marine Propeller
A Non-Destructive and Effective Metrology to Automatically Monitor Kink Effect of MOSFETs
Evaluation of 18 Year-Service Lifetime of NR-SBR Lining
A Kinetic Model for Cassava Starch Hydrolysis under Cold Enzyme Two-Stage Hydrolysis Condition
Uniformity Assessment of Digital Prints based on NPS and CSF
CHAPTER 26: Automation Technology of Production Process
The Recognition of Target and Attitude of Bucket for Excavator Robot Based on Color Mark Tracking
The Improvement of PID Control Based on Programming Transition Process
Decentralized IMC-PID Controler Design for Multivariable System
Electro-Hydraulic Servo Central Position Control System of Strip Based on the Principle of Differential Capacitance
J-Automatic Welding Robot Software Design
PID Parameters Adjustment Based on PMAC Control Card
CHAPTER 27: Advanced Manufacturing Technology
Research on Large Steam Butterfly Valve for Steam Turbine DFMEA Tool System Based on Knowledge Management
Research on Feedrate Optimization Based on Cutting Force Model with Double Effect for the Ball-End Milling
Rapid Manufacturing Technique of Casting Mould Based on the SLS
Singular Problem and Improved Plane Interpolation Algorithm
High Efficiency Strategy in Mould Cavity Roughing Oriented Machining Features
Effect of Different Particles Distribution on Microstructure and Corrosion Resistance of Nickel-Base Laser Cladding Coatings
Verification of Surface Finish as an Indicator of Machinability in Turning Steel X6Cr16Ni10MoTiN
Comparison of Forecasting Methods for Thermal Error on High-Speed Motorized Spindle
Proposal for Machining Optical Free Form Surfaces Using Atmospheric Pressure Plasma Jet
Study on Machining and Measurement for Borosilicate Glass Conical Ellipsoid
Synchronous Control of Multi-Integrated System of Electro-Hydraulic with Mechanic Based on Virtual Axis Model
Research on Output Power of Plasma for PCVD Synthesizing Silica Glass
Investigation of Dry Cutting and Applications of Cutting Fluid in Ball-End Milling Process
Development of Recycled TiH2 Feedstock for Powder Injection Molding
In-Mold Rheology Curves with Feedstock and Mold Dimension
Manufacturing Technology of μ-Gear and Mold by Fe-Ni Alloy Electroforming
In-Process Monitoring and Estimation of Tool Wear on CNC Turning by Applying Multi-Sensor with Back Propagation Technique
Development of a HLA/RTI for High Performance Simulation
Color Separation Technique of Jacquard Fabric and the Improved Method Thereof
Research on Reusable and Sharing Manufacturing Resource Based on Command Intelligent Multi-Agent
Modeling and Optimization of Mould Non-Sinusoidal Oscillation Process
A New Approach to Precision Cropping with Radial Forging
Manufacture Probe with EDM Single Pulse Discharge Research
Study of the Effect of Electric Field Distribution to the Pulse Electrochemical Machining
The Vibration Analysis and Modal Experimental Study of High Speed Motorized Spindle
Cutting Performance of Cemented Carbide-Based Self-Lubricating Tool Embedded with CaF2 Solid Lubricants
Progress on Investigation of Pores During Selective Laser Melting of Metal Powders and Future Work Discussion
CHAPTER 28: NEMS/MEMS Technology and Devices
A Fast Method for Analyzing the Effect of Mask Error on Photolithography Pattern Quality
Anti-Overload of a High-G Acceleration Sensor
Performance Optimization for a 3-DOF Micro-Motion Device
Three-Dimensional Micro-Channel Structure of Graphene Field-Effect Transistor
Optimization of Deformation Shape of an Active Electro-Optical Focusing Device
Channel Direction Effect on the GaAs Mesfet Performances for MEMS Accelerometer Application
Simulation of Miniature Vapor Compression Heat Pump System
Performance of Surface Carrier Mobility for Nano-Node Strained (110) MOSFETs with Temperature Effect
Design, Fabrication and Analysis of Microrobotic Insect Wings and Thorax with Different Materials by MEMS Technology
The Theory Based on the Displacement of Mass of MEMS Gyroscope Used in Spinning Projectiles Analysis and Simulation
CHAPTER 29: System Analysis and Industrial Engineering
Clothing Workshop Production Line Analysis and Improvement Research Based on IE
Modeling and Exergy Analysis of Seawater Source Heat Pump System
Dynamic Analysis of Physical Modeling of Underground Gas Storage
Application the Cumulative Exergy Analysis to the Optimal Heat Exchange Process
Study on the Method of Measuring the Inertia Moment of Multi-Cylinder Engine
Modeling and Simulation on the New Technology Diffusion of Cars Using Cellular Automata
Production Logistics System Simulation about Automobile Parts Shop Based on Witness and E-Factory
Interval Analysis Method of Uncertain Structural Systems Based on Random Model
CHAPTER 30: Production and Operation Management
Design and Implementation of Performance Appraisal System for Foundry Enterprises
Flask Management in the Foundry Moulding Plan
Research on Protocol-Based Mechanism and Algorithm for Customer Collaborative Design Task Allocation
FTA-Based Human Unsafe Behavior Control in Coal Mine Intrinsic Safety Management
An Assessment of Subway Station Capacity
Agent-Based Modeling and Simulation on Multi-Stage Supply Chain Operation
The Profit and Loss Accounting Method to Propel the Management of the Key Customer in the Coach Industry
Research of Customization Model Based on MES
Challenges and Opportunities of Logistics Cost Reduction in China under the Background of Low-Carbon Economy
Research and Application of Inventory Management System of Foundry ERP Based on Multi-Agent
CHAPTER 31: Other related Topics
Fisher Discriminant Analysis Model of Drilling Downhole Accidents and its Application
A New Type of Packing Apparatus with High Efficiency and the Experimental Research of its Mass-Transfer Performance
DOA Estimation Algorithm in Switch Antenna Array with a Single Cycle of Sampled Data
Study on MgO-MgO•Al2O3 Bricks Used Burned Zone of Cement Rotary Kiln
Application of High Pressure Jet Grouting Technology in the Seepage Control of Earth Dam Reinforcement
Macro Analysis Would Like to Drop Half a Drop of Solution
The Design of Monitoring System Static Model for Storage and Retrieval Vehicles in an Automated Warehouse
Computing Acceleration of FMM Algorithm on the Basis of FPGA and GPU
Reforming Teaching and Management System and Improving Engineering and Technical Personnel Practice and Innovation Ability
Finite Element Analysis of the Effect of Surface Hardening Depth in Port Crane Wheel
Design of Dual-Core Architecture Industrial Robot Controller Based on FPGA
CFD-Based Design of the Natural Ventilation System of the Traffic Center of T3 in Beijing International Airport
Analysis and Application of Deflection Curve Equation Expressed in Terms of Geometrical Parameters for Compressed Bars
Sampling Distribution of the Coefficient of Variation when the Population Takes Normal Distribution N(0,σ2)
An Analytic Iteration Method of Geometrical Nonlinear Analysis for Frame Structures and its Application Program Research
So42- /ZrO2 Solid Super-Strong Acid Esterification Catalyst Prepared by Supersonic Wave Technique
An Analysis Method with Equivalent Circuit for the Electrical Effect Induced by Laser Plasma
Simulation Study of Converter Coherent Jet Oxygen Lance
Effect of Some Factors on Fabrication of Clad Strip by a Roll Caster
Multiscale Coupling of Meshless Particle Method and Molecular Dynamics and its Applications at the Nanoscale
Odor Source Localization Using Multiple Robots in Complicated City-Like Environments
Perturbation Method of Light Scattering for the Probability Distribution Function of Particles' Shape
Financial Evaluation of the Listed Electric Power Enterprises in China Based on Entropy TOPSIS
Performance Analysis and Numerical Simulation in Elliptical Tubes
A Numerical Simulation of the Working Process of Diesel Engine
Product distribution during Datong Coal Pyrolysis and Hydropyrolysis
Research on Shaft-Less Technology of Inking System
Experimental Research on Modifier Optimization of Flotation Process in a Molybdenum Ore in Inner Mongolia
Numerical Simulation of Electromagnetic Induction Heating in the Material Heat Treatment
A Method for Calculating Deformation of Long-Distance Pipeline Based on Strain
The GPU-Based Parallel Implementation of Phase Information Extraction of Multi-View Images
Gear Fault Diagnosis Method Based on Cyclostationary Degree and HMM
Wireless Sensor Network (WSN) Using in Tunnel Environmental Monitoring for Disaster Prevention
Effects of Cellulase Modification on Fiber Surface and Quality of Masson Pine Mechanical Pulp
The Research on Green Project Management Evaluation Method of Construction
Study on the Coordination Compound of Human-Like Collagen with Copper (II)
Analysis on Evolution of Landscape Pattern in Dianchi Basin Based on RS and GIS
The Research of Impact in Pipe Pile Squeezing Soil to Bearing Capacity of the Pile
The Application of Fuzzy Analytic Hierarchy Process in Community Informatization Level Evaluation
A Study on Speed of Fluid in Swirling Abrasive Jet Nozzle and Drilling Hole Performance
Emergence of Difficulties among Organizations in Applying Supply Chain Management
Via Structure Optimized Design and Study of Copper Interconnect
Analysis Methods of Bottom Pressure for Fractured-Vuggy Reservoir
Index Properties of Organic and Slightly Organic Soils

最近チェックした商品