- ホーム
- > 洋書
Full Description
The goal of this special collection of peer-reviewed papers was to provide an unique opportunity to exchange information, to present the latest results and to review relevant issues in contemporary diffusion research. The result is a work which will provide valuable insights into this subject.
Volume is indexed by Thomson Reuters CPCI-S (WoS)
Contents
Preface and Organizing Committees
Effect of Catalyst Diffusion Coefficient on Ethylbenzene Dehydrogenation
Investigation of the Effect of Diffusion Process in the Catalyst Pellet on Overall Reaction Rate of Dehydrogenation of Diethylbenzne to Divinylbenzne
Diffusion Layers with Ti and Ti+Al Formed on 316L Austenitic Steel by a Pack Cementation Procedure
Influence of Important Nanoemulsions pH on Performance of Nanostructures Catalysts for H2 Production in Syngas Reactions
Cosmic Censorship!: Thermal Transport in a 'Naked' Black Hole
Assessment of Thermal Non-Equilibrium Condition on Heat Transfer through a Channel Lined with Porous Media - Constant Wall Temperature
Computational Algorithms for Topological Cycle Indices of Tert-Butyl Alcohol by Computational Science
Comparison of the Breakthrough Curves Obtained by ASTM D2007-03 Annex 1 and on a Bench Unit for the Selection of Adsorbents for the Removal of Nitrogen and Sulfur Contaminants from Fuels
Application of Thermo-Mechanical Process to Achieve Nanostructure in 301 Austenitic Stainless Steels
Phase Transformations on ASTM a 744 Gr. CN3MN Superaustenitic Stainless Steel after Heat Treatment
Calculation of the Diffusion Coefficient of Uranium in Compacted Clay: Effect of the Temperature
Surface Characterization of a Nitrided Low Alloy Steel
Formation of Zirconia and Titania Nanotubes in Fluorine Contained Glycerol Electrochemical Bath
Grain Boundary Parameters in Sandstone and Limestone
Electrochemical Mass Transfer Measurements of CO2 in MDEA Solutions
Simulation of VOCs Recovery Process by Absorption
The Effect of Stabiliser's Molarity to the Growth of ZnO Nanorods
Aligned Growth of Zinc Oxide Nanorods on Catalyst-Seeded Si Substrate by Aqueous-Solution Immersion Method
Microstructure-Toughness Relationship in AISI4340 Steel
Studies of Ionic Conductivity and Dielectric Behavior in Polyacrylonitrile Based Solid Polymer Electrolytes
Hydrodynamic Simulation of Drift Mobility in N-Hg0.8Cd0.2Te
Composition Dependent Diffusivities in Multi-Component Systems
In Situ Simulation by RHEED and Photoemission of GaAs (001) β2(2x4) Reconstructed Surface
Determination of PBP by Using a Nano SiO2/GC Modified Electrode
Molecular Dynamics Simulation of Solidification of Ag-x%Au Nanoalloy
Diffusion of Hydrogen in Amorphous Ni-Zr Alloys
Effect of the Latent Heat on Wax Deposit in Pipelines
Polyol-Mediated Synthesis of TiO2 Nanoparticles
Study of Semisolid and ECAP Processes on Al-Fe-Si Alloy - Microstructure and Kinetic Grain Growth
Phase and Amplitude Control of Optical Properties of Quantum Dot Molecules
Heat Transfer in Nanocomposites with Monte-Carlo Simulations
The Influence of Rubber Blend Aging and Sample Homogeneity on Heat Transport Phenomena
Experimental and Theoretical Research of the Shell Side Heat Transfer Coefficient and Pressure Drop in a Plastic Shell and Tube Heat Exchanger
Raman Spectroscopy: Mutual Diffusion Coefficient in Hydrogels
Characterization of Nickel Based Alloys (Hard Facing Alloys) with Additions of Ti and Mo
Effectiveness Parameters for the Heat and Mass Transfer in a Desiccant Wheel
Thin Scandium Layer on Solid Aluminium: Thermodynamic Investigation
Dynamic Thermal Diffusivity Measurements - A Tool for Studying Gas-Solid Reactions
Phase Transformation and Thermoelectric Properties of Sn-Filled/Fe-Doped CoSb3 Skutterudites
A Study on the Coupled Thermal and Damage Effects in Deforming Solids
Pulse Electrolysis for the Production of Hard Ni/ZrO2 Composite Coatings
Finite Element Modeling of Silicon Transport into Germanium Using a Simplified Crystal Growth Technique
Effects of Mechanical Activation during the Synthesis of Tungsten Carbide Powders by Carbothermic Reduction of Tungsten Oxide
Numerical Analysis of Solute Segregation in Directional Solidification under Static Magnetic Field
Effect of Quincke Rotation and Taylor Circulation on Mass Transfer from a Fluid Drop in a Constant Electric Field
Quantitative Evaluation of the Raman Spectra of Carbon Layers
Grain Structure Evolution of Mg Alloy AM60 Influenced by Ca Addition
Solidification of Discontinuous Al2O3 Fiber Reinforced Magnesium (AM60) Matrix Composite
The Influence of Acetic Acid on High Temperature Corrosion of Selected Steels Utilized in Automobile Industry
Effect of Multifilamentary Nb/Cu-Sn Wire Diameter on the Nb3Sn Diffusion Layers Structure
Origin of "Inverse Isotope Effect" of Hydrogen Diffusion in Palladium
Physical Properties of Diffusive-Hardening Alloys of Copper with Gallium and Tin
The Effect of the Microstructure on Oxidation of Sulfide-Metal Alloys of Copper and Nickel
Synthesis of W- Cu- Ag Nanopowders Produced by a Co-Precipitation Process
Production of Cu/SiC Nanocomposite Layers by Friction Stir Processing
Comparison of Corrosion Performance of Zn and Zn/Al 85/15 Coatings Produced by TWEA
Thermo-Mechanical Behaviour of Ultrahigh Molecular Weight Polyethylene-Carbon Nanotubes Composites under Different Cooling Techniques
Carbon Fiber-Reinforced Composites in Automotive Engine
The Effect of the Pyrolysis Furnace Type on the Yield of Silicon Carbide Whiskers Produced from Rice Husks
Experimental Study of Enhanced Pool Boiling Heat Transfer Using Graphite Foam Inserts
Acoustical Parameters: Aqueous Solution of Borassus Flabellifier Fruit Pulp by Non Destructive Method
Estimation of Effective Moisture Diffusivity in Starchy Materials Following Hydrothermal Treatments
Synthesis of Cobalt Nano Particles on Silica Support Using the Strong Electrostatic Adsorption (SEA) Method
Corrosion Behavior of Laser Nitrided Ti-6Al-4V Alloy: A Review
Mathematical Modeling of Heat Transfer in Laser Surface Hardening of AISI 1050 Steel
Reactive Diffusion at the Cylindrical Dissolving of Copper in the Solder Melt
Electron Diffusion in ZnO Nanomaterial: An Ac Impedance Investigation
Microstructural Changes of FSX-414 Superalloy during TLP Bonding
Macrosegregation and Porosity during Directional Solidification of a Ternary Al-9wt%Si-3wt%Cu Alloy
Diffusion Paths in the Ternarysystem Fe-Co-Ni: An Empirical Approach
Self-Diffusion Coefficient of Molecular Fluid in Porous Media
Sonochemical Synthesis and Characterization of Hydroxyapatite Nanoparticles
Numerical Comparison of Two and Three Dimensional Flow Regimes in Porous Media
Free Convection in a Nanofluid Filled Square Cavity with an Horizontal Heated Plate
Microstructure Characterization of TBC Layers of Gd2Zr2O7 Type
Thermal Diffusivity of TBC Layers of RE2Zr2O7 Type
High Temperature SO2-Gas Corrosion of Ni-Cr-Co Base Superalloy between 800 and 1000oC
Modeling of Transient Moisture Diffusion in Wood below the Fiber Saturation Point
Fabrication of Multi-Walled Carbon Nanotube/Vinyl Ester Nanocomposites: Dispersion and Stabilization
Diffusion in Co-Ni System Studied by Multifoil Technique
Microstructure and Hydrogenation Property of Hyper-Eutectic Mg-Ni Alloys
Numerical Investigation of Impingement Heat Transfer Enhancement on a Flat Plate with an Attached Porous Medium
Oxidation Behaviour of WE54 and Elektron 21 Magnesium Alloys
The Influence of Heat Treatment Parameters on the Thermal Diffusivity of WE54 and Elektron 21 Magnesium Alloys
Analytical Solution for Solute Transport in Semi-Infinite Heterogeneous Porous Media
Effect of SiC Volume Fraction on the Microstructural and Mechanical Properties of Cu/SiC Composite Layer Fabricated by FSP
In Situ Analysis of Hydrogen Mobility during Hydrogen Permeation through Nb-Based Hydrogen Permeable Membranes
Characterization of Hydrophilic Membranes Based on PVP and Carboxymetylcelulose Staple Fibers Infused with Calcium Alginate
Investigation of a New Sn-Cu-Ga Alloy Solder
Gas Nitriding of Sintered Austenitic Stainless Steel
Kinetics of Low Temperature Nitriding of Precipitation Hardened Stainless Steel
Numerical Study of Magnetic Field Effects on Buoyancy Driven Convection in a Non-Isothermally Heated Square Enclosure
Microstructure and Properties of CBN Diffusion Coating on High-Speed Steel
Confined Bubble and Heat Transfer during Flow Boiling in a High Aspect Ratio Mini-Channel
Partition of Free Fatty Acids in Deacidification of Macaúba Pulp Oil by Liquid-Liquid Extraction Using Ethanol/Water as Solvent
Reducing Hydrogen Permeation through Metals
Influence of Measurement Results of Thermal Conductivity and Heat Transfer Coefficients on the Simulation Results of Casting Process of Aircraft Engine Elements
Characterization of Microstructure and Properties of Plasma Sprayed Ceramic Coatings on AZ91 Magnesium Alloy
Characteristics of Thermal Properties of Gd2Zr2O7 - ZrO2XY2O3 Powder Mixtures Intended for Deposition of Gradient Layers of TBC Type
Characteristics of Phenomena in Powders Type RE2Zr2O7-Al2O3 in High Temperature Annealing Conditions
The Impact of Diffusion Process on the Interface Microstructure in AZ91 Magnesium Matrix Composites Reinforced with TiN Nanolayer Modified Carbon Fibres
High-Temperature Diffusion Barrier for Ni-Cr Cast Steel
Real Time Prognostic Strategies: Application to Gas Turbines
Investigation of the Effect of Electrospun Polyethersulfone Nanofibers in Membrane
Synthesis and Characterization of PES/TiO2 Nanofibers Membrane
Weight Analysis in a Quantum Mechanical Transport Model for Nano and Bio Materials
A New Approach for the Diffusion Coefficient Evaluation of Sulfur in CaO-SiO2-Al2O3 Slag
Experimental Results on Evaporation Waves
Modeling of Heat and Mass Transfer in an Annular Adsorber for Solar Cooling Machine: Performance Coefficients
Characteristics of Liquid-Solid Mass Transfer in a Bubble Column Equipped with a Vertical Tube of Circular Fins
Effect of Ti and Fe Alloying on Kirkendall Voids Feature in Ni/Ni3Al Welded Joints after the High Temperature Annealing
Influence of the Thermo-Piezo-Viscous Effect on the THD Lubrication in Porous Self- Lubricating Bearings
Simplified Convective Heat Transfer in Vertical Airflow Regimes with Shading Device
Numerical Simulations of Heat Transfer in Plane Channel Flow
Thermal Properties of Zirconium Oxide-Based Ceramic Targets Modified with Oxides of Rare Earth Elements
Mechanisms of Microstructural Rearrangement on Two-Dimensional Aggregates under Compressive Stress
Microstructural Evolution of Synthesized Polyhydroxyalkanoates (PHAs) Corresponding to their Blends
Improving the Diffusion Controlled Cementation of Cadmium Ions Using Reciprocating Fixed Bed of Zinc Rings
Augmentation of the Performance of Batch Electrocoagulation Unit by Using Gas Sparging
Structure and Thermal Transformations of Hydrated Magnesium Silicates
Heat and Mass Transfer Made Visible
The Influence of Phase Dispersion of Sulfide Alloys on their Electrochemical Properties
Influence of Geometry on the Position and the Intensity of Maximum Kinetic Energy in a Combustion Chamber
An Overview of the Diffusion Studies in the V-Si System
Nutrients and Metabolic Secretions Transfer in Cornea
Structural, Mechanical and Magnetic Properties of Mechanically Alloyed Fe40Co60 Powders
New Use Heat Transfer Theories for the Design of Heat Setting Machines for Precise Post-Treatment of Dyed Fabrics
Diffusion of Particles Adsorbed on a Dynamically Disordered Reconstructive Surface
Sensitivity Tests of Simulation Models Used in Chosen Calculation Codes on Uncertainty of Thermo-Mechanical Parameters during Virtual Mechanical Stress Estimation for Ferrous Alloy Castings
Estimation of Coupled Thermo-Physical and Thermo-Mechanical Properties of Porous Thermolabile Ceramic Material Using Hot Distortion Plus® Test
Uncertainty of the Diffusion Measurements on Scaffolds for Cell Growth
Effect of Co-Doping of Nano Silver, Carbon and Nitrogen on Titania on the Visible Light Activity for Methylorange Degradation
Modeling of Non-Uniform Thermoelement Devices Subject to Lateral Heat Convection
Microstructure and Properties of Diffusion Boride Layer on Die Steel
Turbulent Diffusion of Suspended Particles: Analysis of the Turbulent Schmidt Number
Polymorphic and Morphological Transformation during the Transition from a Propagating Band to Static Bands in the Nickel Hydroxide/Ammonia Liesegang System
Oxidation and Mechanical Behaviour of Iron Based Alloys and Nickel Based Alloy for Spring Like Interconnects of the PRODHYGE High Temperature Electrolyser
Determination of the Pore Sizes and their Influence on the Capillary Imbibition into Glass Wool
Sorptivity and Hydraulic Diffusivity of Coating Gypsum and Impact of Hemp Fibers Addition
The Influence of Rare Earth, Strontium and Calcium on the Thermal Diffusivity of Mg-Al Alloys
Determination of Gamma Transmittance and Density Assessment for Al Doped ZnO Thin Films by Using Gamma Transmission Technique
Electromagnetic Radiation Effect on ZnO Nanocrystallites
Single Layer Drying Behavior of Apple Slices in a Microwave Dryer
Drying Behavior of Polyester Based Yarn Bobbins in a Hot-Air Bobbin Dryer
Simulation of Drying Behavior of Cotton Bobbins by a Simultaneous Heat and Mass Transfer Model
Finite Element Simulation of Drying of Rough Rice
Airborne Pathogens Transport in an Aircraft Cabin
Fluid Flow and Solid/Fluid Suspensions Flow in 3-D Packed Beds of Spheres: The Effect of Periodicity of Fixed Beds
Micro Arc Oxidation of AZ91 Mg Alloy for Improved Corrosion Resistance
Electrochemical Hydriding of Mg-Based Alloys
Suppression of Iron Silicide Formation in the Reaction Layer of Sialon - 7.5% Cr Ferritic Steel Joint
Elaboration of Sol-Gel Derived Hydroxyapatite / Yttria Stabilized Zirconia Composite Coatings Obtained for Biomedical Application
Effect of Temperature on the Growth of Vertically Aligned Carbon Nanotubes from Palm Oil
The Effect of Precursor Vaporization Temperature on the Growth of Vertically Aligned Carbon Nanotubes Using Palm Oil
Speckle-Based Deflection Techniques in Diffusivity Measurements
Role of Forming Gas Annealing Characteristics on the Selective Surface Oxidation of Fe-Mn-Si-Cr Model Alloy
Effect of Impinging Jet on Heat Conduction in Workpieces Irradiated by a Moving Heat Source
Dispersion of Twin Inclined Fume Jets of a Variable Height within a CrossFlow
Non-Isothermal Enhanced Recovery of Heavy Oils by Numerical Simulation
Numerical Investigation of the Thermal Properties of Irregular Foam Structures
Performance of a Water Ammonia Absorption System Operating at Three Pressure Levels
3-D Finite Element Simulation of Friction Stir Welding Process of Non Similar Aluminum-Copper Sheets
Numerical Simulation of Transient Temperature Fields in Solids Irradiated by Moving Gaussian and Donut Sources
Flow Structure Issued from a Bent Chimney around a Cylindrical Obstacle: Effect of the Aspect Ratio
Heat and Mass Diffusion Including Shrinkage and Hygrothermal Stress during Drying of Holed Ceramics Bricks
Effect of Tool Nose Radius on Nano-Machining Process by Molecular Dynamics Simulation
Investigation of Interatomic Potential on Chip Formation Mechanism in Nanometric Cutting Using MD Simulation
Oxygen Diffusion in Yttria-Stabilized Zirconia Subjected to Mechanical Stress
Low Temperature Nitriding of a Martensitic Stainless Steel
The Effect of Micro Arc Oxidation Process Parameters on Surface Properties of Ti6Al4v Alloy
Friction and Wear Behaviour of Borided Ti6Al4v Alloy Sliding Against Al2O3 and Si3N4 Balls in Water
Nitriding of Cp Titanium
Effect of Tube Bending on Heat Transfer Characteristics of Miniature Heat Pipe with Sintered Porous Media
Thermomecanical Response of LNG Concrete Tank to Cryogenic Temperatures
Electrical Properties of Nanostructured Titanium Dioxide Thin Films Prepared by Sol-Gel Spin-Coating Method
Thermal Shock Damage Evaluation of Porous Refractory by Finite Element Method
The Synthesis of VACNTs Grown on MgxZn1-xO (0< x <0.3) Template
Synthesis of Supergrowth VACNTs and Nanostructured ZnO by Immerse Method
Experimental Investigation of Gas-Heavy Oil Molecular Diffusion Coefficient in Porous Media: Experimental Results for CO2 in Iranian Crudes
Characterization of Interaction Layer in U-Mo-X (X = Nb, Zr) and U-Nb-Zr vs. Al Diffusion Couples Annealed at 600oC for 10 Hours
Cocoa Husk Waste Mucilage as New Flow Improver in Pipelines
Optimization of Dry and Wet Heat Transfer through Textile Structures
Design of Multifunctional Truss-Like Periodic Materials Using a Global-Local Optimization Method
Two Phase Dynamic Model for Gas Phase Propylene Copolymerization in Fluidized Bed Reactor
Rational Design of TiO2-Based Anode Materials Using Computer Modelling
Diffusion and Electrophoretic Transport of DNA Polymers in Microfluidic Channels Made of PDMS
Review of Several Studies on High Temperature Oxidation Behaviour and Mechanism of Austenitic Stainless Steels
Hydrogen-Induced Superabundant Vacancies in Metals: Implication for Electrodeposition
Modern Models of Grain Boundary Diffusion
Growth of Multi-Shaped Zinc Oxide Nanostructures Using C-Axis Oriented Zinc Oxide Thin Film as a Seeded Catalyst via Hydrothermal Aqueous Chemical Growth Method
Optical Properties of Nanostructured Zinc Oxides Deposited on Silicon Substrates
Optimisation of Envelope Insulation for the Retrofit of an Educational Building
Cold-Set Whey Protein Isolate Gels: The Influence of Aggregates Concentration on Viscoelastic Properties
Water Vapour Adsorption Study in Spherical Particles Packed in a Cylindrical Container
Performance and Modelling of Water Vapour Adsorption in Piles of Granules Using a Cylindrical Pore Model
Extraction of Useful Food and Cosmetic Ingredients of Vegetable Origin
Simulation and Modeling of Turbulent Plasma Jet Based on Axisymetric LBGK Model
Soil Water Characteristic Curve for a Granite Residual Soil: Experimental and Numerical Results
Experimental Investigation of the Evaporation and Stability of a Meniscus in a Flat Microchannel
Diffusion and Ionic Conduction in Soda-Lime Silicate Glasses and in Alkali Borate Glasses
Mathematical Model of Forecasting the Iron Ore Materials and Coke Quality Indicators
Mathemathical Model of Powder Sintering with Nano- and Microadditives
Investigation of Grain Boundary Diffusion in Thin Films by SNMS Technique
Diffusion of Charged Species in Metal Oxides and Polymeric Solids Using AC Impedance Technique
Comparison of Ionic Diffusion in Sol-Gel Derived Micron and Nano LiTaO3
Oxygen Diffusion in an Nb-Ta Alloy Measured by Mechanical Spectroscopy
Mechanical Spectroscopy Study on Cu53.5Zr42Al4.5 Alloy
Enhanced UHMWPE Reinforced with MWCNT through Mechanical Ball-Milling
