- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This edition is published by results of the 2018 International Symposium on Structural Integrity (ISSI2018, Nov. 2-5, 2018, Nanjing, China). The articles cover a variety of topics associated with research in the area of the structural integrity assessment and ensuring, while the fracture mechanics, damage mechanisms and structural strength aspects of engineering materials have been closely focused on. The publication of the proceedings aims to present the current solutions in the field of structural integrity research of materials, components and structures.
Contents
Preface
Chapter 1: Mechanical and Fatigue Properties of Structural Materials
Research on Brittle Fracture of X70/X80 Line Pipes with Big Wall Thickness at Low Temperature
Initiation and Propagation Behaviors of Small Fatigue Crack in Titanium Alloy TC4
Calculation of Diffusion Coefficients in γ-Ni
A Novel Method to Predict the Mechanical Properties of DP600
Low Cycle Fatigue Behavior of CP-Ti at Different Temperatures
Deformation Features of a High Mo Nickel-Based Single Crystal Superalloy during Creep at High Temperature
Effect of Ratcheting Strain on Mechanical Properties of Additive Manufactured 4043 Aluminum Alloy
Microstructure and Mechanical Characterization of Laser Welded 6013 Aluminum Alloys Overlap Joint
Evolution of Impact Properties of 16MND5 Forgings for Nuclear Reactor Pressure Vessel during Thermal Aging at 500oC
Fatigue Life Properties of Stainless Steels in Wide Ranged Biaxial Stress State
Investigation of Mechanical Properties and Ductile-Brittle Transition Behaviors of SA738Gr.B Steel Used as Reactor Containment
Research on the Micro-Mechanical State at Tip of Environmentally Assisted Cracking Based on Latin Hypercube Sampling Method
A more Accurate Constraint Parameter to Characterize the Creep Constraint Effect at Crack Tip of Cr-Mo-V Steel
The Precipitation Behavior and Mechanical Properties of Long Term Serviced HR3C/T92 Dissimilar Joint
Effects of Curing Temperature and Pressure on the Mechanical Properties of Gasket Material Used for Polymer Electrolyte Membrane Fuel Cells
Study on Stress Corrosion Cracking Sensitivity of CrNiMoV Steam Turbine Rotor Steels
Low Velocity Impact Responses of GLARE Hybrid Laminates Based on Simplified Finite Element Model
Experimental Study on Peeling Properties of T Type Brazing Joint
Creep Damage of a Re/Ru-Containing Single Crystal Nickel-Based Superalloy at Elevated Temperature
An Improved Omega-Based Method for Creep Life Prediction Using Hyperbolic Sine Stress Correlation
The Effect of Surface Self-Nanocrystallization on Low-Temperature Gas Carburization for AISI 316L Steel
Determination of Ratio of Yield Strength and Reduced Modulus during Cold Work Processing in 304 Austenitic Stainless Steel
Effect of Pre-Strain on Small Punch Creep Test of 316L Stainless Steel at 373K
Creep Void Formation and Rupture Lifetime in Multiaxial Stress States
Determination of Material Fracture Toughness by Circular Pre-Cracked Small Punch Test Specimens
Multiscale Modeling of a Notched Coupon Test for Triaxially Braided Composites
Modelling of Hysteresis Behavior of Ceramic Matrix Composites
Comparison of Tensile Properties of 1.25Cr-0.5Mo Steel Characterized by Miniature Specimen and Standard Specimen
Experimental Study on High Temperature Creep Damage of 1Cr5Mo Steel Based on Magnetic Parameters
Evaluation for Properties of Anti-Corrosion Epoxy Coating after Photo-Oxidation Aging
Effects of Building Orientation on Fatigue Behavior of Ti-6Al-4V Alloy Produced by Selective Laser Melting
Anisotropic Elastic Constants Calculation of Stainless Steel Cladded Layers of Pressure Vessel Steel Plate
Chapter 2: Structural Integrity Assessment of Components and Systems
Reliability Calculation Method for Natural Gas Pipelines with Girth Weld Defects Identified through In-Line Inspection
A Study on the Safety Factor for Corrosion Assessment of Oil and Gas Pipeline through In-Line Inspection
Microstructural Characterization and Property Evaluation of Service Exposed Reformer Tubes
Sealing Performance Evaluation for Bolted Flange Joint with Spiral Wound Gasket Based on the Bolt Force
The Fatigue and Fracture Analysis of Steam Turbine Rotor Shafts Containing Defects
The Method of Design by Analysis for Cylindrical Pressure Vessels with Spherically Dished Head
Stress and Fatigue Analysis of Pressurizer Surge Line under Thermal Stratification
A Parametric Investigation of the Through-Thickness Residual Stresses in the Thick Weld Plate Considering Back Chipping: Neutron Diffraction and Finite Element Method
Burst Strength Study of Glass-Fibre Reinforced Composite Pipes by Simulation and Theoretical Analysis
Analysis on Bursting of Rupture Disc Made by Inconel 600 Alloy
Effects of Hydroforming Process on Fatigue Life of Reinforced S-Shaped Bellows
Durability Airworthiness Verification Connotation Analysis and Compliance Method Investigation for Turbine Blade
Investigation on Creep Properties of Welded Joint of Modified 9Cr-1Mo Martensitic Heat-Resistant Steel
Tracking Supervision of Service Performance and Life Assessment of Defective 15Cr1Mo1V Steel Pipeline
Progressive Failure Analysis of an Integral Composite Joint for Thrust Reverser Cascade
Influence Factors of Fracture Mechanics Analysis of Reactor Pressure Vessel under Pressurized Thermal Shock
Failure Analysis of Hot Clamp Induced Cracking on Hydrogen Reformer Outlet Pigtail Tubes
The Study of Inspection and Supervision for Overage Service Pressure Vessels in Petrochemical Plants
Fatigue Behavior of Metal-Packaged Regenerated Fiber Bragg Grating Strain Sensors at High Temperatures: A Preliminary Study
Chapter 3: Theoretical Basis and Development of Structural Integrity Assessment Methods
Simulation Implementation on the Direction Prediction of Crack Propagation Based on the First Principal Stress
J-Resistance Curve Testing Using Modified Normalization Method for SENT Specimens
Effect of Material Property Difference on the Creep Behavior of Bending Specimen
A Novel Fatigue Evaluation Approach with Direct Steady Cycle Analysis (DSCA) Based on the Linear Matching Method (LMM)
Effects of T-Stress on Fracture Behavior of Central-Cracked Stiffened Plate
Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading
Effect of Orthotropic Mechanical Property on the Limit Load of Cylindrical Shell under Internal Pressure
Estimation of Residual Stress and Plastic Properties of a Material without Plastic Plateau by Using Continuous Spherical Indentation
Numerical Simulation of Residual Stress in P91 Repair Welding Incorporating Martensitic Transformation
Study on Sufficiency of Reference Stress Solutions for Crack-Like Flaws for Fitness-for-Service Evaluation
The Method to Obtain JR- Curve by Continuous Ball Indentation Method
Demonstrating Structural Integrity under Challenging Load and Material Conditions
Crack Tip Stress Analysis of the Steam Generator Dissimilar Steel Welded Joint under Residual Stress Field
A Multi-Surface Plasticity Method for Lower Bound Shakedown Load
Recent Developments in Small Punch Testing: Interlaboratory Tests and Standardization
A Hybrid Method for Detection and Diagnosis of Faulty Roller Bearings
Novel Method to Improve the Imaging Accuracy of Defect Based on Zero-Signal Filling for the Plate
