ＴＨＥＲＭＥＣ２００３：第４回先端材料の加工・製造国際会議録 THERMEC'2003 (Materials Science Forum)

Candra, T. (EDT)/ Torralba, Jose Maria (EDT)/ Sakai, Tetsuo (EDT)

Trans Tech Publications Ltd（2003/07発売）

• 製本 Paperback:紙装版/ペーパーバック版／ページ数 4650 p.
• 言語 ENG
• 商品コード 9780878499199
• DDC分類 620.1122

基本説明

Topics on various aspects of the processing, fabrication, structure/property evaluation and applications of both ferrous and non-ferrous materials: including biomaterials, ecomaterials and smart/intelligent materials.

Full Description

Volume is indexed by Thomson Reuters CPCI-S (WoS).
This 5-volume set comprises the Proceedings of the 4th International Conference on Processing and Manufacturing of Advanced Materials, "THERMEC2003", held from July 7-11, 2003 at the Universidad Carlos III de Madrid, Leganes, Spain, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA.

Contents

Mechanical Properties of Metastable Alloys with Novel Atomic Configurations Obtained by Use of Stabilization of Supercooled Liquid
Mechanical Property - Microstructure Relations in Iron-Carbon Alloys from 1.0 to 5.2% Carbon
Microstructure and Mechanical Property of Ultra-Fine (Ferrite + Cementite) Duplex Structure in High Carbon Steel
Hybrid Modelling Methodology Applied to Microstructural Evolution during Hot Deformation of Aluminium Alloys
Advances in the Kinetic Theory of Carbide Precipitation
Control of Microstructure in TRIP Steels by Niobium
New Challenges in the Thermomechanical Processing of HSLA Steels
The Critical Strain for Dynamic Recrystallization in Rolling Mills
Strength and Fracture of Aluminium Alloys
Properties and Microstructures of a High-Performance Thermoelectric Intermetallic Compound — β-Zn4Sb3
Recrystallization Texture of (123)[-6-3 4] Copper Single Crystal Cold Rolled up to 99.5%
Recent Developments in the Design and Processing of Gamma-Based Titanium Aluminide Alloys
Texture, Microstructure and Forming of Aluminium Alloy Sheets
Alloy Development and Associated Dimensional Changes of Aluminium Alloys during Liquid Phase Sintering
New Material Systems and Manufacturing Techniques for High Strength Sintered Precision Parts
Functionally Graded Materials Produced with High Power Lasers
Solid State Joining as a Method for Producing Large Scale Billets from Microcrystalline Materials
Multifunctional Coating Design for High-Temperature Materials
Some Recent Work on Alloy and Process Development of Ti and TiAl-Based Alloys
New Development in Magnesium Technology for Light Weight Structures in Transportation Industries
High Nitrogen Steel and Interstitial Alloying
Composites on the Way to Structural Automotive Applications
Third-Generation Gene-Activating Biomaterials
Thermomechanical Control in Aluminium Sheet Production
Life Cycle Assessment of Coating Treatments for Automotive Magnesium Parts
The Developing Prospect of Air-Cooled Bainitic Steels
Pt and Hf Additions to NiAl Bond Coats and their Effect on the Lifetime of Thermal Barrier Coatings
Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron
Mechanical Properties of IF Steel Produced by Thin Slab Casting and Direct Hot Rolling Process
Friction Stir Welding - Recent Developments
Recent Developments of SPD Processing for Fabrication of Bulk Nanostructured Materials
Phase Formation Sequence Map for Al-Ni-Gd Glass-Forming System Devitrified at 250oC
Ti-Ni-Based Shape Memory Alloys as Smart Materials
Creep Data Prediction for Aluminium Airframe Alloys
Forging Studies with Severe Plastic Deformation Processed Aluminum Alloy 6061
An EBSD Study of Sub-Grain Structure Development in Hot Deformed Al-1%Mn Crystals
The Characterization of the Plastic Potential of Aluminum Alloys Using Internal Variables of Strain Rate Sensitivity, Mean Slip Distance and Mean Slip Velocity
Effects of Strain Rate on Deformation Behavior of A6061-T6 Aluminum Alloy
The Interaction between Precipitation and Recrystallization during Annealing of Cold Rolled AA6111
Removal of Porosity in Cast Aluminium Alloys by Equal Channel Angular Extrusion
Development of Properties during Secondary Ageing of Aluminium Alloys
The Strengthening and Microstructure of Precipitation Hardened Al-Li-Cu Alloys
Ultrasonic Welding of Aluminum-Magnesium Alloy
Temperature Effect on Microstructure Development in 7475 Aluminum Alloy during ECAP
Improved Material Properties for Cast Aluminium Alloys: From the Processes to Life Prediction Modelling
Phase Separation Structure Near the Surface in Al-Ag Binary Alloys
The Effect of Alloying Elements on the Microstructure and Mechanical Properties of Al-12Si Cast Alloys
Environmental Embrittlement of Al-Zn-Mg-Cu Alloys with Cr or Zr
Computer-Aided Optimization of Aluminum Alloys for Airframe Applications
Precipitation Sequence of Al-Mg-Si Alloys
Microstructure and Plastic Anisotropy in Rolled Al-Mg Alloys
Anomalous Tensile Stability for an Aluminum Alloy at High Temperatures and High Strain Rates Interpreted from a Dislocation Dynamic View Point
Effect of Addition of Cu on Structures of Metastable Phases in Al-Mg-Si Alloys
Grain Refinement in As-Cast 7475 Al Alloy under Hot Multiaxial Deformation
The Obtention of Homogeneous Microstructures in Al-Sn-Based Tribological Alloys
Damage Behaviours of Various Coarse Al-Fe-Si Particles in Model Wrought Alloys
Lattice Rotations at Large Second-Phase Particles in Polycrystalline Aluminium
Quantitative Analysis of Structure-Strength Relation of Commercial Purity Aluminium Deformed by Accumulative Roll Bonding and Annealed at Low Temperature
Development of High Damping Aluminum Alloys and Composites Using Rapidly Solidified Powder Metallurgy Process
Processing and Characterization of Porous Aluminum
Precipitation Hardenable Al-Mg-Cu Alloys: Mechanical Properties and Hardening Mechanisms
Microstructures and Workability of Spray-Formed and Cast AZ91 Mg Alloys
Quenching and Cold-Work Residual Stresses in Aluminum Hand Forgings: Contour Method Measurement and FEM Prediction
Compressive Behavior and Energy Absorption of Constructed Cellular Aluminum
Effect of the Homogenisation Conditions on the Extrudability and High Temperature Fracture Resistance of AA6063 Aluminium Alloy
Work Hardening in Metals: Microscopic and Macroscopic Behavior through a Wide Range of Strain
Light Alloys Innovation in Australia
Study of the Crack Sensitivity of 6xxx and 7xxx Aluminum Alloys
The Effect of Si Additions on the Nucleation of Ω in Al-Cu-Mg Alloys
Semisolid Strip Casting Using a Vertical Type Twin Roll Caster
In-Situ, Laser-Ultrasonic Monitoring of the Recrystallization of Aluminum Alloys
Development of New Aluminium Alloys for Semisolid Processing
Thermal Behaviour of Hot Extruded Aluminium with Copper Phosphorus Additions
The Pinning of Grain Boundaries during the Recrystallization of an Al-0.3Mn-0.15Si Alloy
Semi-Solid Extrusion of Al-10%Mg Alloy with a Non-Dendritic Structure
Hot Working Microstructure Map for Magnesium AZ31
Investigation of Corrosion Behaviour of Magnesium Alloy AM60B-F under Pseudo-Physiological Conditions
Grain Refinement of Magnesium Alloy AZ91D Cast in Permanent Mold Using Mechanical Vibrations
Challenges in Lost Foam Casting of AZ91 Alloy
The Influence of Procedure Parameters on the Characters of Semi-Solid AZ91 Magnesium Alloy
Development of Plasticity Processing of Magnesium Alloys
Optimisation of Mechanical Properties of an AZ 91 Alloy by Microstructure Control
Deformation Behavior and Forging of Magnesium Wrought Alloy
Microstructure and Mechanical Properties of Hot-Extruded AZ31 Powders
Current Status and Manufacturing Technologies of Magnesium Alloy Parts in Japanese Home Electronics
Mechanical Alloying of Powder Mixture of Magnesium Alloy Chips and Aluminum
Microstructure of Anodic Films Grown on Magnesium-Lithium-Yttrium Ultra Light Alloy
Simulation of Mg Sheet Press Cell Materials
Creep Behavior and Deformation Substructure of Mg-Y Alloys Containing Dilute Content of Zinc
Atomic Size Effects on Al, Ca and Sc in Mg Solid Solutions from First-Principles Calculations
The Effect of Temperature and Flow Stress for Climb-Controlled Dislocation Creep in Magnesium Alloy
Initial Grain Size Effect of Dynamic Recrystallization of Magnesium Alloy AZ31
Mechanical Properties of Magnesium Alloy Sheets Produced by Semi-Solid Roll Strip Casting
Expendable Pattern Casting of AZ91D Magnesium Alloy
Hydrostatic Extrusion of Magnesium: Process Mechanics and Performance
Microstructural Evolution during Hot Rolling of an AZ31 Mg Alloy
Titanium Airframe Applications: Brief History, Present Applications and Future Trends
Effect of Cu-Ni Plasma Coating on Fretting Fatigue Characteristics of Ti-6Al-4V under Flat-on-Flat Contact
Dynamic Recovery and Recrystallization in Beta-Titanium Alloys
Control of Mechanical Properties of Ti-Fe-O-N Based Titanium Alloys by Thermomechanical Processing
Effect of Microstructures on Mechanical Properties of Heat Resistant Titanium Alloys at Elevated Temperatures
Ultra-Fine Grain Refinement, Superplasticity and its Application of Titanium Alloys Obtained through Protium Treatment
Multi Functional Titanium Alloy ''GUM METAL''
High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Widmanstäten Microstructure
Research on Microstructure and Mechanical Properties of Laser Direct Deposited Ti-6Al-4V Alloy
Effect of Cold Rolling on the Annealing Texture of a Near-α Titanium
Study on Microstructure and Mechanical Properties of an Orthorhombic Ti-Al-Nb-Ta Alloy
A New Alpha-Beta Alloy, Ti-4.5Al-4Cr-0.5Fe-0.2C, Solution Hardened by Ultra High Content of Carbon
Deformation Behavior and Microstructure Evolutions in Ti-6Al-4V Extrusion
Creep Behaviour at 760oC of Two Nickel-Based Single Crystal Superalloys
Microstructural Influences on Notch Fatigue Crack Initiation and Propagation in a Range of Nickel Base Superalloys
Change in Shape of Creep Curves of γ Single Phase Ni-20mass%Cr Single Crystals with Decreasing Stress
Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys
Microstructural Changes in a Ni-Based Super-Alloy Induced by Thermal Treatment
Small-Angle Neutron Scattering: A Tool for Microstructural Investigation of High-Temperature Materials
The Effect of Cold Rolling on the Grain Boundary Character and Creep Rupture Properties of INCONEL Alloy 718
γ' Precipitation Kinetics in P/M IN100
An Investigation on Electromagnetic Shaping and Solidification Behavior of Superalloys under Vacuum Environment
Mirco-Mechanisms Involved in Rafts of Crept MC2 Nickel-Based Single Crystal Superalloy
Creep of [011]-Oriented Ni-20mass%Cr Single Crystals
Microstructural Evolutions of Superalloy 718 during Dynamic and Metadynamic Recrystallizations
Characterisation and Modelling of Crystal Rotations during Multiaxial Creep in Single Crystal Superalloys
Low-Stress Creep of Ni-20mass%Cr Single Crystals with [001] Orientation
Microstructure Analysis and Modeling of Ingot to Billet Conversion in Alloy 718
Morphology of γ' Precipitates in Experimental W- and Re- Containing Ni-Base Superalloys
Misfit Investigations of Nickel-Base Superalloys
High Strength Galvanized Wire for Bridge Cables
Microstructural Elements and Fracture of Hardened High-Carbon Steels
High Strain Rate - High Strain Response of an Ultrahigh Carbon Steel Containing 1.3% C and 3% Si
Fracture Behavior of an Ultrahigh Carbon Steel Containing 1.3%C as Influenced by Microstructure and Testing Conditions
Stress-Strain Rate Relations in Ultrahigh Carbon Steels Deformed in the Ferrite Range of Temperature
Mechanical Properties of Cementite and Fabrication of Artificial Pearlite
Hot Deformation of Hypereutectoid Steels
Mechanical Properties of In-Situ Laminated Composites Based on Ultrahigh Carbon Steels
Superplastic Densification of Ultrahigh Carbon Steel Powder Compacts
Innovative Ultrahigh Carbon Steel Laminates with Outstanding Mechanical Properties
Suppression of Secondary Ferrite Formation by Boron Addition in High Carbon Steel Wires
Particulate Composites of White Cast Iron
Transformation Behavior of Carbon-Unsaturated and Super-Cooled Austenite in a High Carbon Alloy Steel
Research Structure Forming and Formation of Physical-Mechanical Properties at Thermoplastic Processing of Spheroidal Graphite Cast Iron
A Novel Processing of Austempered Ductile Cast Iron (ADI)
Superplastic Ultra-High Carbon Steels Processed by Spray Forming
Influence of Heat Treatment on Fatigue Behavior of a Cu-Ni Alloyed Austempered Ductile Iron
Characterizing Alloy Additions to High Nitrogen Steels
Nitrogen-Alloyed Austenitic Stainless Steels for Wire and Cable Applications
Nitrogen and Carbon in Austenitic and Martensitic Steels: Atomic Interactions and Structural Stability
Effects of Nitrogen on the Deformation Behavior of Duplex Stainless Steel
Thermodynamics of Nitrogen Absorption into Solid Solution in Fe-Cr-Mn Ternary Alloys
The Dependence of Activity Coefficient on Intensive Thermodynamic Parameters in a Liquid Fe-N-V Alloy
Thermomechanical Treatment of Nitrogen-Containing Corrosion Resistant Steels: Various Structure Classes
The Effect of Grain Size on the Mechanical and Cavitation Resistance of a High Nitrogen and Low Nickel Austenitic Stainless Steel
Cycle Precipitation of Fe16N2 in Nitrided Iron Alloys
Thermomechanical Strengthening of Nitrogen-Bearing Austenitic Stainless Steels
Microstructural Evolution of Sulfide in Fe-Cr-S Alloys
A Finite Element-Based Integrated Process Model for the Prediction of Thermo-Mechanical and Metallurgical Behavior of Stainless Steel in Cold Strip Rolling
Evolution of Grain Boundaries and Subboundaries in Stainless Steel during Dynamic Recrystallization
Modelling Primary Recrystallization and Grain Growth in the AISI 316 Stainless Steel
Influence of Wire Electrical Discharge Machining on the Fatigue Properties of High Strength Stainless Steel
Creep Properties and Microstructures on Thermo-Mechanical and Magnetic Treated 9Cr Ferritic Steels
Effect of Impurity Sulfur on the Stability of Cr Oxides Formed on both Austenitic and Ferritic Steels in a High-Temperature Steam-Atmosphere
Two Specimen Complex Thermal-Mechanical Fatigue Tests on the Austenitic Stainless Steel AISI 316 L
Effect of Sulfur and Phosphorus on Ductility of As Cast Iron-Nickel-Chromium Alloys, Direct Observations on In-Situ Fractured Surface by AES and TEM
Modelling the Nitriding Kinetics of Iron-Chromium Alloys
Tribological Behaviour of a Liquid Nitrided Precipitation-Hardening (PH) Stainless Steel
Computer Models of Phase Separation Dynamics in Fe-Cr-Mo Ternary Alloys
Formation of Ultra-Fine Grained SUS316L Steels by Ball-Milling and their Mechanical Properties after Neutron Irradiation
Prediction of the Flow Stress Curves in Austenitic Stainless Steels
Nitride Layer Formation on Chromium-Nickel Steel
Claude Rossard, a French Pioneer in the Field of Thermomechanical Processing
Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel
Austenitic Grain Refinement in As Cast HSLA Steels by Dynamic Recrystallization
Dilatometric Measurements on the Transformation Behaviour of Nb-Added CSiMn TRIP Steels
Improvement of Creep Rupture Properties of Heat Resisting Steels by the Self-Healing of Creep Cavities
Swirling Flow Effect in Immersion Nozzle on Heat and Mass Transport Phenomena in Continuous Casting Mold
Structure and Phase Transformation under Quenching and Tempering during Heat and Thermomechanical Treatment of Steels
Influence of Thermomechanical Processing on Microstructural Evolution in Si-Mn and Al-Mn TRIP Steels
Effects of Alloy System on Spontaneous Reverse Transformation Behavior in Steel
Static Recrystallisation-Precipitation Interaction in Microalloyed Steels
Advances on the Characterization of High-Silicon Steel for Electrical Applications Produced by Thermomechanical and Dipping-Annealing Treatment
Study of Grain Boundary Ferrite Nucleation in V Microalloyed Steels by EBSD
New Process for High-Toughness Linepipe Material of Thin Slab and Direct Rolling
Recrystallisation Nucleation during Annealing of Ti-Sulc Steel
Ferritic-Pearlitic Steel with Deformation Induced Spheroidized Cementite
Effects of Carbon Content on Wear Property in Pearlitic Steels
Regression and Solute Drag Models for the Activation Energy of Static Recrystallisation in Hot-Worked Steels
CATRAN - A Multi-Task Physical Model and Computer Program for the Prediction of the Microstructure of Steels According to an Arbitrary Cooling Schedule
Hot Deformation of Austenite at Rates Encountered in the Finishing Stages of Hot Strip Rolling
New Developments for Microalloyed Heat Treating Steels
Effect of Grain Refinement and its Application to Commercial Steels
Effects of the Addition of High Nitrogen Contents on the Microstructure of 25%Cr- 5%Ni Ferritic-Austenitic Duplex Stainless Steel (DIN Wr. Nr. 1.4460)
The Influence of Al on the Mechanical Properties of Hot Rolled Steel Plates
Heat Treatments to Improve Weldability of New Multiphase High Strength Steels
Microstructural Changes of Cementite and Ferrite in Heavily Drawn Pearlitic Wires
Strain-Induced Precipitation of Nb(CN) in Low Carbon Steels: Modelling and Experimental Validation
How to Produce Super-Tough Structural Steels
Thermomechanically Processed TS-BH Hot-Rolled Sheet Steel and its Strengthening Mechanism
Investigating Precipitation in Microalloyed Austenite during Thermomechanical Processing
Theoretical Study on Sympathetic Nucleation VS Ledgewise Growth of Bainitic Ferrite in Steel
Study of the Role Played by Nitrogen on the Deep-Drawing Properties of Aluminium Killed Steel Sheets Obtained after a Continuous Annealing
Simulation of the Hot Rolling of Trip-Assisted Multiphase Steels
Grain Size Effect on Behaviour and Microstructure of a Warm Deformed Ti-IF Steel
Application of Focused Optic Irradiation for Surface Treatment of Commercial Steels
TWICE + HOWAQ Continuous Annealing Line: A New Facility for High Strenght Steels Production in Arcelor Group
A Study on Ultrafine Ferrite Formation during Post Deformation Cooling
Sigma-Phase Formation upon Solidification Rate in Heat-Resistant Steels
Strain Induced Precipitation in a Multi-Microalloyed Steel Containing Nb and Ti during RPC Processing
A Model for Niobium Carbonitride Precipitation in Ferrite
Sigma Phase Precipitation in a Superferritic Stainless Steel
Interest of the ThermoElectric Power Measurement for the Study of Strain Ageing in Bake Hardening Steels
Effect of Low Carbon Contents on the Activation Energy for Plastic Deformation upon Steels
Design of Novel High-Strength Bainitic Steels
Aqueous Abrasive Wear of 8620 Borided Steel
Deep-Drawable Steel Strip Produced by Ferritic Rolling
Micromechanical Damage Simulations of TRIP Steels
Microstructural Characterization of Multiphase Steels
Optimisation of Hot Workability and Control of Microstructure in AISI Type 304L Stainless Steel Using a 'Refined' Dynamic Materials Model Processing Window
A New Method to Determine the Strain and Strain Rate Hardening Characteristics from the Hot Torsion Test
Effect of Solidification Structure and Thermomechanical Processing on Microstructure and Texture of Ferritic Stainless Steels
Changes in Structure and Properties of Ferrous Substrates due to Silicon Surface Alloying by Laser
High-Temperature Annealing for Maximization of Dissolved Boron in Creep-Resistant Martensitic 9Cr Steel
Flow Stress and Microstructure Modelling of Ferrite-Pearlite Steels during Cold Rolling
Modelling Upper and Lower Bainite Transformation in Steels
Suppression of Surface Hot Shortness Caused by Copper in Recycled Steel
The Structure Variation of Deformed Austenite during the Relaxation and the Refinement of Bainite in a Nb-B Steel
Hydrogen Embrittlement and Electrochemical Corrosion Behaviors of Cu-IF and Microalloyed HSLA Steels
Critical Assessment of the Bainite Transformation of Finely Grained and Deformed Austenite
Influence of Relaxation Process on the Microstructure and Properties of Low Carbon Bainitic Steel
Cold Plasma Discharge Processes: An Alternative Technology for Steel Annealing
Development of an Ultra-Low Carbon High Strength Welding Wire
Effect of Welding Thermal Cycle on the Microstructure and Mechanical Properties of Ultra-Fine Grained Carbon Steel
High Grade Steel Development
Development of High Strength Low Alloy TRIP-Aided Steels with Ultra Fine Grain
A Novel 1500MPa Economic High Strength Steel
Effect of NbC Distribution on Mechanical Properties in IF High Strength Steel with Fine Grain Structure
Development of a Fire Resistant High Strength Low Alloy Steel for Construction
Effects of Ausforming on Strength and Toughness in Low Alloy Bainitic/Martensitic Steels
Influence of Liquid Core Reduction in the Microstructure of Steel Thin Slabs
Martensitic and Reverse Transformation in Fe-Ni Bicrystals
Effect of Ti Addition on Mixed Microstructure of Allotriomorphic and Bainitic Ferrite in Wrought C-Mn Steels
A Quantitative Study of Interphase Precipitation in a Commercial Microalloyed Steel
High Strength Stainless Steels Manufactured by Temperature Controlled Rolling
Microstructural Changes during Stress Relaxation of a Deformed Nb-V Microalloyed Austenite
Evolution of Austenite Microstructure and Precipitation State during Hot Rolling of a Nb-Microalloyed Steel
Mechanical Behaviour and Corrosion Resistance of Stainless Steel Cold Rolled Reinforcing Bars
Behavioural Study of a Manganese Steel Subjected to Abrasion Wear and the Influence of Thermal Treatment
Correlation between Apparent Activation Energy for Hot Working and Temperature of No Recrystallization in Microalloyed Steels
Experimental and Finite Element Modeling for Prediction of Optimum Phase Combinations in Dual Phase Steels
A Physics-Based Transformation Model for Low-Carbon Steels: From First Principles to On-Line Application
Heterogeneous Deformation Behavior of Pearlite Steels Studied by Neutron Diffraction
Criteria for Weldability Assessment of Austenitic Stainless Steels
Effect of Prior Austenite Microstructure on Austenite/Ferrite Transformation of Fine Grained High Strength Low Alloy Steel
Effect of the Reduction Assigning in Two-Time Cold Rolling IF Steel Sheet for Drawability
The Morphology, Crystallography, and Formation Mechanism of Grain Boundary Proeutectoid Cementite in High Carbon Steels
Effect of Microalloying on Hot-Deformation Resistance during Rolling
Proposition of Two Parameters for a Good Characterisation of the Austenitising Condition of Microalloyed Steels
Synthesis and Characterization of Ni-Al Intermetallics Compounds with Grain Refinement Emphasis
The Investigation of Superplasticity in NiAl Intermetallic Compounds
Effect of Ag Alloying on Microstructure, Mechanical and Electrical Properties of NiAl Intermetallic Compound
Superplasticity in Large-Grained Intermetallics
Interfacial Reactions between Gamma TiAl and CaO Stabilized ZrO2 Shell Mould during Casting
The Role of Interfaces in Plastic Deformation of Intermetallic Alloys
The Influence of Microstructure and Residual Stress on Pre-Yield Cracking in TiAl-Based Alloys
Behaviour of Ordinary Dislocations in Crept TiAl Alloys at High Temperatures
Recrystallization Texture and Microstructure of an ODS Fe40Al Alloy
High-Temperature Deformation Behaviour of Gas Atomized TiAl Alloy Powder Compacts
Lamellar Transformations in Ti-Al Based Alloys
Hot Working of Gamma TiAl Alloys for Turbine Applications
Processing of Carbon Containing Gamma Titanium Aluminide Alloys
Site Preference Occupation of Co and Mn in Fe3Al-Based Alloys
Control of Lamellar Arrangement in TiAl Intermetallic Compound by Mechanical and Thermal Processes
Slip Systems, Dislocation Structure and Plastic Deformation Behavior of Ni3Ti Single Crystals with D024 Structure
Property Enhancement of Orthorhombic Ti2AlNb-Based Intermetallic Alloys
Semi-Quantitative HRTEM for Partially Ordered Materials: Application to Al-Rich TiAl Alloys
Mechanical Properties of Cold-Rolled Ni3Al Thin Foils
Directional Solidification of TiAl Alloys for Aligning Lamellar Microstructures and Mechanical Properties of Directionally-Solidified Ingots
Formation of FeAl In Situ ODS Alloy by Mechanochemical Reaction Using Mill Scale Powder and its Properties
Oxidation Behavior of Mo-Based Alloys Coated with Silicide Using the Halide-Activated Pack Cementation Method
Effects of α2 Spacing on Creep Deformation Behavior of Hard Oriented PST Crystals of a Lamellar TiAl Alloy
Effects of Processing Condition on Properties of Ti-Aluminides Reinforced Ti Matrix Composites Synthesized by Pulsed Current Hot Pressing (PCHP)
Selectivity of Anti-Phase Boundary Introduced in Al5Ti3 Superstructure
Influence of the Addition of Cr and Al Elements to the Mo3Si Intermetallic Alloy on the Phase Construction and the Oxidation Behavior
Crystal Structure and Thermoelectric Properties of ReSi1.75 Based Silicides
Identification of Chirality of Enantiomorphic TaSi2 Crystallites by Convergent-Beam Electron Diffraction
Enhanced Densification of Combustion Synthesized Ni-Al or Ti-Al Intermetallic Compounds by Third Element Addition
Creep Properties of Ir-Based Alloy with FCC + L12 Two-Phase Structure
Orientation Dependence of Pseudoelasticity in Fe3Al Single Crystals
Improvement of the Oxidation Resistance of EPM Gamma-TiAl Alloy by Y-Addition
Microstructure Control of DS NiAl/Ni3Al Alloy by Fabrication of Columnar-Grained NiAl Martensite
High Temperature Oxidation of Ti-(43‾52%)Al-2%W-(0‾0.5%)Si Intermetallics
Syntheses of Metastable Trialuminides by Mechanical Alloying
Effects of Si and B Additions on the Thermal Stability of Lamellar Microstructure of TiAl Alloys
The Effect of Li, Ce and Ni Additions on the Microstructure and the Mechanical Properties in the AlFe Intermetallic System
Properties of γ-TiAl-M (M = Ag, Cr) Sputtered Films
Strangeness of Deformation Behavior of Intermetallics
Reaction Sintering of an Aluminium-Based Ternary Intermetallic and its Properties
On the Strength of Ni3Al Based Compounds
Crystallization Behavior and the Thermal Properties of Zr63Al7.5Cu17.5Ni10B2 Bulk Amorphous Alloy
Processing Intermetallic Sheet Materials from Elemental Foils Using Cold Roll Bonding and Reaction Annealing
Effect of Silicon on the Thermal Properties of the Zirconium-Based Bulk Amorphous Alloys
Microscale Characterization of Deformation Defects in Bulk Intermetallics Alloys Using Electron Channeling Contrast Imaging
Transient Liquid Phase Bonding of Intermetallic Compounds
Sintering Behavior of Iron Aluminide Powders
Discovery of Critical Oxygen Content for Glass Formation in Zr80Pt20 Melt Spun Ribbons
Effect of Chromium Addition on the Properties of a Fine-Grained PM Ni3Al Alloy
Superplastic Behavior of Hot Extruded Gamma TiAl (Mo, Si) Alloys
Nanocrystalline Microstructures Produced by Twinning during Superplastic Deformation of a γ-TiAl Intermetallic
Mechanosynthesis of an Fe-Ni Melt-Spun Amorphous Alloy under Different Milling Conditions
Processing of γTiAl, by Ceramic Crucible Induction Melting, and Pouring in Ceramic Shells
Reaction Rate and Mechanism in the Formation of Rare Earth - Transition Metal Compounds
Glass Formation in Eutectic Alloys
Liquid Phase Sintering of WC-FeAl and WC-Ni3Al Composites with and without Boron
Fabrication of Nickel-Aluminides Fiber / Nickel Composite by Reaction at Narrow Holes
Synthesis of Magnesium-Particulate Composites by Thermomechanical Processing
Processing and Properties of Metal Matrix Composites Synthesized by SHS
Investigations of New Oxide Dispersion Hardened Platinum Materials in Laboratory Tests and Industrial Applications
Time-Temperature Dependences of Fracture Toughnesses of Epoxy Resin and Silica Particulate-Filled Epoxy Composite
In Situ Multilithic Metal Matrix Composites Produced by Codeformation Processing
Microstructures for High Precision Cemented Carbide Micro-Die Machined by FIB
Casting of Composite Material Strip Using a Downward Melt Drag Twin Roll Caster
Process Improvement for Investment Casting of SiCp/AZ91D Magnesium Composite
Material Mechanical Properties and Microstructure of Magnesium Alloy Matrix Composites Fabricated by Casting Process
Electromagnetic Wave Absorption Properties of Amorphous Alloy-Epoxy Composites
Effect of Thermal Treatment on Thermal Expansion Behaviour of Magnesium Alloy Based Hybrid Composites
Synthesis of TiC/Ni Cermets via Mechanically Activated Self-Propagating High-Temperature Synthesis
Deformation Behaviour of 7075Al/SiCp Composite during Multi-Pass Deformation at High Temperatures
Steel Reinforced Thermoplastics
Determination of the Interfacial Bond Strength for Composite Materials
Computer-Assisted Design of Nb-Based In-Situ Composites and Superalloys
Sliding Wear Behavior of TiB2 Nanoparticle Reinforced Copper Matrix In-Situ Composites under Electric Current
Development of a New Composite Product from Blast Furnace Slag
Wear and Mechanical Properties of Reaction Synthesized Ti-6Al-4V/TiC Composite
Study of the Coefficients of Thermal Expansion of Phases Embedded in Multiphase Materials
Internal Stress Reduction in Filament Wound Composite Pipes by Humid Conditioning: Numerical Simulation
A Novel High Profit Recycling Technology for SiC Particle Reinforced Magnesium Composites
Preparation and Characterization of Hydroxyapatite Powder/Poly(Acrylamide/Itaconic Acid) Composite Hydrogel
Creep Model for Multidirectional Short-Fiber Reinforced Metal Matrix Composite
A Study on the Improvement of the Toughness in Al-Cu-Fe Quasi-Crystals
Thermal Cycling of Mg-MMCs
Combustion Synthesis of Copper Matrix (Ti,W)C Reinforced Composites
A Multi-Scale Continuum for Damaged Fibre Composites
Development of Aluminium Composites through P/M Route: Case of Nitrides
Characterisation of Orthorhombic (Ti25Al25Nb)/SiC Intermetallic Composites for Advanced Space Applications
Novel Electronic Packages Made of Highly Loaded SiC Particle Aluminium Based Composites for Space Applications
Ventilated Brake Discs Manufactured in Aluminium Matrix Composites and Hypereutectic Aluminium Alloys
Study of a Curing Reaction of an Epoxy Resin
Thermal Conductivity Estimation in Continuous Fiber Metal Matrix Composites with Random Distributions
New Aluminium Matrix Composites Manufactured by an In-Situ Process
Pressure Infiltration of Silver Into Compacts of Oxidised SiC
Thermal Expansion Coefficient and Thermal Hysteresis of Al/SiC Composites with Bimodal Particle Distributions
Effect of Plastic Deformation on the Microscopic Residual Stresses in 6061Al-15vol%SiCw Composites
Processing and Properties of Cu Matrix Composites for Microelectronic Application
Compression and Compression-Compression Cyclic Deformation Properties of Ferromagnetic Ni2MnGa-Based Shape Memory Alloy
Deposition of Fe-Pd Ferromagnetic Shape Memory Alloy Thin Films by Sputtering and Their Shape Memory Behavior
Martensitic Transformation of Partially Irradiated Ni-Ti Films, Resulting in a New Technique For Designing Micro-Actuators
Effect of Geometric Factor on Characteristics in Multilayer Ceramic Actuators
Theoretical Interpretation of Adhesion Phenomena and its Application to Micro-Manipulation
Characteristics of Electronic Structures and Chemical Bonding in Hydrogen-Storage Compounds
Molecular Dynamic Simulation of AFM-Based Nano Lithography Process for Fabrication of MEMS Components
Fabrication and Development of Electroactive Ionic Polymer-Metal Composites and Their Applications as Smart Materials
Constitutive Response of Polycrystalline Shape Memory Alloys
Neutron Diffraction Study of Shape Memory Effect of Ni2MnGa-Type Alloys
Phase Transformation of B2-PtTi with Ir
Training of Magnetic Shape Memory Alloys
Fabrication and Thermal Expansion of Al-ZrW2O8 Composites by Pulse Current Sintering Process
Recent Progress of Magnetically Controlled Shape Memory Materials
Twinning and Detwinning of Type II Twins in NiTi Shape Memory Alloy
Screen Printing of Carbon Nanotubes for Display Applications
Effect of Pre-Strain on Shape Memory Strain and Recovery Stress of Ni-50.4Ti Shape Memory Alloy
Conversion of Variants by Magnetic Field in Iron-Based Ferromagnetic Shape Memory Alloys
Martensitic Transformations in NiTi Polycrystals Investigated by In-Situ Neutron Diffraction
Near Net Shape, Low Cost Ceramic Valves for Advanced Engine Applications
Shape Recovery of Ni-Ti Alloy Fiber-Reinforced Denture Base Resin by Smart Repair Process
Phase Stability and Mechanical Properties of Ti-Ni Shape Memory Alloys Containing Platinum Group Metals
Protein Motors: Their Mechanical Properties and Application to Nanometer-Scale Devices
Voltage Criterion for Electrostatic Detachment of a Microparticle from a Micromanipulated Probe
Processing and Properties of Mechanical Alloyed Al93Fe3Cr2Ti2 Alloys
Dynamic Shock Compaction of Nanocrystalline Bulk Magnetic and Thermoelectric Materials
Non-Equilibrium Properties of Nano Structured Materials
A Study of Nanoindentation of Nanostructured Materials
Preparation and Mechanical Properties of Nanocrystalline Bulk Materials by Spark Plasma Sintering Process
Study on the Magnetic Properties and Microstructure of Nd-Fe-B Nanocomposite Permanent Magnets
Bulk Nanocrystalline Ni3Al Material Prepared by Self-Propagating High Temperature Synthesis Casting at Low External Temperature
Calculation of the Free Energy Barrier in the Freezing of Nanoclusters by Atomistic Simulations
First-Principle Study on the Reactions and Dynamical Electronic Characteristics of Electromigration on Aluminum Nanowires
Effect of Mo-Doping on the Sol-Gel Prepared Catalysts for Synthesizing Multi-Wall Carbon Nanotube Bundles
Synthesis and Processing of Metallic Nano-Powders for the Study of their Mechanical and Magnetic Properties
Bulk Nanostructured Aluminium Alloy Al93Fe3Cr2Ti2: Processing and Characterisation
Quantum Sized Chromophores in Vanadium Ceramic Pigments
Influence of the Strain Rate on the Mechanical Behaviour of a Nanocrystalline Mg-23.5Ni Alloy
The Isothermal Oxidation Response of a Gamma-Titanium Aluminide Alloy
Laser - Induced Surface Modification in A319Al Alloy
Surface Modification of Dilute Mo-Ti Alloys by Gas Carburization
Effects of Bond Coat Processing on the Durability of Thermal Barrier Coatings
Understanding the Formation of D.C. Plasma Sprayed Coatings
High Properties Metallic Alloys Obtained through the Thermal Spray Route
On Production of Nanocrystalline Ternary Nitride Coatings via Magnetron Sputtering
Mechanism, Modeling and Application of Laser Large Area Surface Modification
Copper Deposition and Subsequent Grain Structure Evolution in Narrow Lines
Application of Electroless Coating for Processing and Joining of Advanced Materials
Modification of Fatigue and Creep Properties of Ferritic Stainless Alloys Using Plasma Immersion Ion Implantation
Improvement of High Temperature Corrosion Resistance of Tool Steels by Nanostructured PVD Coatings
Electrolytic Al2O3/ZrO2 Coating on Co-Cr-Mo Implant Alloys
Possibility of Repairing Damaged Die Casting Die Surfaces Using CO2 Laser Surfacing
Microstructure and Residual Stress Analysis after Laser Cladding of Low-Carbon Steel with Powdery SiC, Stellite 6, and Stellundum 481
How Creep Properties Influence the Stress State of Thermal Barrier Coatings
Deposition/Detachment of Particles on Plasma Treated Polymer Surfaces
Development of Solid Oxide Fuel Cells (SOFC) for Stationary and Mobile Applications by Applying Plasma Deposition Processes
M3B2 Boride Cermet Coating by Sintered Powder
Research Progress on Laser Cladding for High-Temperature Wear and Corrosion Resistant Transition Metal Silicides Composite Coatings
Oxidation Behavior of Cr-Doped Nb(Si,Al)2 and Coating Nb Substrates with Cr-Doped Nb(Si,Al)2
Surface Engineering of Titanium Alloys: New Prospective Applications
The Characteristics of TiCrN Film Prepared by the Dynamic Ion Beam Mixing Method
Laser Surface Treatment of Sintered M42 High-Speed Steel Diluted with Iron
Oxidation Resistance Coating for Niobium Base Structural Composites
The Influence of Surface Preparation on the Properties of Tungsten Carbide Coatings Produced by Gas-Detonation Method
Hot Corrosion Behavior of Yttria and Ceria Stabilized ZrO2 Thermal Barrier Coatings
How to Select Induction Surface Hardening and Finished Grinding Conditions in Order to Ensure High Compressive Residual Stresses on Machine Parts Surface
Formation of Super-Hard Modified Surface by Reactive Electrical Discharge Machining
Surface Modification by Duplex Process Consisted of Radical Nitriding and PVD
Duplex Treatment for Improvement of the Die Performance
Wear Behaviour of HVOF Thermal Sprayed WC-Co and CrC-NiCr Coatings
Developing Ultrafine-Grained Microstructures through the Use of Severe Plastic Deformation
Microstructural Control of a Precipitate-Hardenable Al-Ag Alloy Using Severe Plastic Deformation
Microstructure Evolution and Mechanical Properties in Al-Mg Alloys during Severe Deformation by ECAP and during Subsequent Annealing
Ultra Grain Refinement of Aluminium 1100 by ARB with Cross Rolling
Influence from Extrusion Parameters on High Strain Rate and Low Temperature Superplasticity of AZ Series Mg-Based Alloys
Investigation of Texture in ECAP Materials Using Neutron Diffraction
Mechanical Properties as a Function of Grain Size in Ultrafine Grained Aluminum and Iron Fabricated by ARB and Annealing Process
Development of Nano-Structured 1200 and 3103 Aluminum Alloys by Equal Channel Angular Pressing
Ultra Grain Refinement of 1100 Aluminium Strip by Tandem Rolling
Comparison between Methods to Characterize the Superplastic Materials
Microstructure and Mechanical Properties of Interstitial Free Steel Subjected to Equal Channel Angular Extrusion
On the Increase of Thermal Stability of Ultrafine Grained Materials Obtained by Severe Plastic Deformation
Properties of Annealed High Strength Steels Deformed by Repetitive Side Extrusion Process
An Investigation of Deformation in Aluminum Single Crystals Using Equal-Channel Angular Pressing
Microstructural Change during Mechanical Milling Treatment in Fe-C Alloy Powders with Different Initial Microstructure
Microstructural Changes in Copper Processed by Equal Channel Angular Extrusion and Static Annealing
Enhanced Superplasticity in Zirconia-Alumina-Spinel Composite Ceramic
Superplasticity of Fine-Grained AZ 91 Alloy Processed by Rotary-Die Equal-Channel Angular Pressing
High Strength and Good Plasticity of L1o Ordered Alloys Provided by Preliminary Strong Cold Deformation
Microstructure and Thermal Stability of Tungsten Based Materials Processed by Means of Severe Plastic Deformation
Fabrication of Surface Nanocrystalline Aluminum Alloys
Crystal Plasticity Model of Microstructure Formation at Severe Strain
Thermomechanical Treatment of Ti-Ni-Based Shape Memory Alloys Using Severe Plastic Deformation
Development of Submicrocrystalline Fe - O Steels under Mechanical Milling Followed by Consolidation
Multi Equal Channel Angular Pressing with Rotational Dies
High Strain Rate Superplasticity of Ultrafine Grained 5083 Al - 0.2 wt.% Sc Fabricated by ECAP
Formation of Sub-Micron Structure for a Ti Alloy
Deformation Structure and Crystal Orientation of Copper Single Crystals Deformed by Equal Channel Angular Pressing
Bulk Nanostructured Steels (BCC), Al Alloys (FCC) and Pure Ti (HCP) Processed by Equal Channel Angular Pressing
Influence of ECAP Modes on Texture and Microstructure Evolution of Aluminium and Copper
Ion Irradiation Effect on Superplastic 3Y-TZP Ceramics
Microstructures of Nickel Deformed by High Pressure Torsion to High Strains
Effect of Backpressure on the Structure and Properties of Al-Based Alloys Processed by ECAP
The Effects of Sandglass Extrusion on Material Microstructures and Properties
Proposals of Novel Surface Modification Technology Using Friction Stir Welding Phenomenon
Microstructural Modification and Resultant Properties of Friction Stir Processed Cast NiAl Bronze
Improvements to the FSW Process Using the Self-Reacting Technology
Laser Treatment Method for Improvement of the Corrosion Resistance of Friction Stir Welds
SEM-EBSD Characterisation of the Deformation Microstructure in Friction Stir Welded 2024 T351 Aluminium Alloy
The Effect of Thermal Treatments on the Corrosion Behavior of Friction Stir Welded 7050 and 7075 Aluminum Alloys
Friction Stir Welding of Al2O3 Particulate 6061 Al Alloy Composite
Thin Section Airframe Alloy Welding within WAFS
The Influence of Friction Stir Processing on Microstructure and Properties of a Cast Nickel Aluminum Bronze Material
Microstructural Modification of Cast Aluminum Alloys via Friction Stir Processing
High Speed Friction Stir Welding of Aluminium Panels for Transport Applications
Friction-Stir Processing of a High-Damping Mn-Cu Alloy used for Marine Propellers
Investigation of the Use of Friction Stir Processing to Repair and Locally Enhance the Properties of Large Ni Al Bronze Propellers
Residual Stresses, Defects and Fatigue Cycling in Friction Stir Butt Welds in 5383-H321 and 5083-H321 Aluminium Alloys
Microstructural and Mechanical Evolutions within Friction Stir Welds of Precipitation Hardened Aluminium Alloys
Thermomechanical Conditions and Resultant Microstructures in Friction Stir Welded 2024 Aluminum
Improved Fatigue Performance of Friction Stir Welds with Low Plasticity Burnishing: Residual Stress Design and Fatigue Performance Assessment
Microstructure and Properties of Aluminum Alloys Friction Stir Welds for Aircraft Application
Effect of Friction Stirring on Microstructure in Equal Channel Angular Pressed Aluminum Alloys
Joint Properties and Thermal Behaviors of Friction Stir Welded Age Hardenable 6061Al Alloy
Utility of Relatively Simple Models for Understanding Process Parameter Effects on FSW
Friction Stir Welding of T-Joints
Development of Friction Stir Forming
Friction Stir Processing of Aluminum Alloy 5083 Plate for Cold Bending
Investigation of the Microstructure and Properties of a Friction Stir Welded Al-Mg-Sc Alloy
Numerical Simulation of Friction Stir Welding
Microstructural Evolution in Ti-6Al-4V Friction Stir Welds
Friction Welding of AZ31 Magnesium Alloy
Grade Development of Polycrystalline Cubic Boron Nitride for Friction Stir Processing of Ferrous Alloys
Effect of Time, Temperature, and Solution Composition on the Passivation of 316L Stainless Steel for Biomedical Applications
Effects of Titanium Surface Topography on the Cell-Extracellular Matrix Interaction in Osteoblasts
Relationships between the Surface Morphology and a Physical Response in the Biomaterial Field
Relationships between Processing and In-Vitro Dissolution of Calcium-Based Bioceramics
Porous Alginate/HAp Sponges for Bone Tissue Engineering
Biomaterial/Polymer Composite for Heart Valve Engineering: Biocompatibility Testing
The Improvement of Biocompatibility of an Equiatomic TiNi Shape Memory Alloy by DC Plasma-Polymerized Hexamethyldisilazane Coatings
Evaluation of Ligand Binding to Type 1 Collagen through Computational and Analytical Methods
Pulsatile Flow Testing of a Biomaterial/Polymer Composite Heart Valve Obtained Through Tissue Engineering
Fatigue Characteristics of Dental Cast Titanium Alloy, Ti-6Al-7Nb, Conducted with Thermochemical Heat Processing
Sintered Porous Titanium and Titanium Alloys as Advanced Biomaterials
Biological Behaviour of Injectable Calcium Phosphate (CaP) Cement
Preparation of Thermosensitive Hybrid Hydrogels for Biomaterials in Drug Release
Surface Properties of Ca-Ion-Implanted Ti-Ni Shape-Memory Alloy
Composition Dependence of Young's Modulus in Beta Titanium Binary Alloys
Interaction of Type IV Collagen Aggregates with Cells
Polymers with Nanostructured Surface Features for Soft Tissue Replacement Applications
Mechanical Properties of Ti-Base Shape Memory Alloys
Increased Osteoblast Function on Nanostructured Materials Due to Novel Surface Roughness Properties
Improving the Fatigue Properties of Poly (Methyl Methacrylate) Orthopaedic Cement Containing Radiopacifier Nanoparticles
Ionizing Irradiation for Sterilization and Modification of Orthopaedic Biomaterials
Multifunctional Protein-Based Matrix for Drug Delivery and Wound Management
Controlled Release from Poly(Lactic-Co-Glycolic Acid) Microspheres Embedded in an Injectable, Biodegradable Scaffold for Bone Tissue Engineering
Oxide Films on Metallic Biomaterials: Myths, Facts and Opportunities
The Influences of Ta and Sn on Phase Constitution and Aging Behavior of Ti-Ta-Sn System Alloys Quenched from a Temperature within Beta Single Phase Region
Bioinspired Polymer Surfaces for Prevention of Bioresponse
Effects of Heat Treatment of Spherical Shape Tetracalcium Phosphate on the Reactivity and Injectability of Apatite Cement
Novel Machinable Calcium Phosphate Glass-Ceramics for Biomedical Use
Hydroxyapatite Coating on Titanium by Thermal Substrate Method in an Aqueous Solution and its Behavior in SBF
Longterm Viscoelastic Behavior of Dental Composites
Organic Modification of Porous α-Tricalcium Phosphate to Improve Chemical Durability
Effects of Casting Defects and Microstructure on Fatigue Properties of Cast Ag-Pd-Cu-Au-Zn Alloy for Dental Applications
Engineering Biomaterials for Control of Immune Cell Functions
Bioactive PMMA Bone Cement Prepared by Chemical Modification
An Integrated Method for Evaluating the Mechanical Integrity of Biomaterials In-Situ
New Class of Lactic Acid Copolymers with Reactive and Hydrophilic Segments for Degradable Biomedical Materials
Enhanced Bioactivity of Electrically Poled Hydroxyapatite Ceramics and Coatings
Polyrotaxanes: Challenge to Multivalent Binding with Biological Receptors on Cell Surfaces
Thermal Ablation Effects of Duplex Stainless Steel Thermo-Implants
Evaluation of Tissue Adhesion Preventive Surface Modified Natural and Synthetic Polymeric Materials
Development of Novel 'Pseudo'Polypeptidic Biodegradable Polymers Based on Natural Amino Acid L-Tyrosine for Biomaterial Application
Surface Grafting Polymerization and Crosslinking of Thermosensitive NIPAAm Hydrogels onto Plasma Pretreated Substrates and Drug Delivery Properties
Preparation and Characterization of Chitosan/Alginate Sponge Immobilized onto Polyurethane-g-Acrylic Acid Modified Film Surface as a Wound Dressing
The Effect of Maleic Anhydride/Glycerol and Plasma Treatment on Biodegradable LDPE/Tapioca Starch Blends
A New Internal Element in Dental Implants
Heat Treatment Influence over the Austenitic Stainless Steel Properties used as Biomaterials
High Performance Mg Alloy by Grain Refinement
Aluminum Alloyed Cast Iron as an Ecomaterial
Sustainable Products/Services Indicators 2002 within Matsushita Electric Group
Recycling of Iron and Steel by Solid State Processes
Resources Circulation-Oriented Ecomaterials Design of Continuous Fiber Reinforced Concrete (FRPRC)
Estimation of Energy Requirements and Atmospheric Emission in Continuous Casting Process for Copper Wire
Physico-Chemical Approach for the Ecomaterialization of Steelmaking Slags
Production of Fine Uniform Lead-Free Solder Powders by Hybrid Atomization
Ecomaterial Processing for Recycling of Iron Scrap Containing Impurities
Material Life Cycle Assessment for Diecasting Process
Mechanical Properties and Microstructure of New Ni Free White Cu Alloy
New-Sandwiched Hydrogen Separation Membranes with Low Environmental Impact
Mechanical Properties of Al/Al3Sc Metallic Multilayers - Deformation Mechanisms at the Nanoscale
MgB2 Thin Film Growth and Characterisation
Structure and Magnetic Properties of Sputtered Fe100-xPtx Alloy Thin Films
Isotopic Exchange between Gaseous Hydrogen and Scandium Dideuteride Thin Films
Characterization of Polymer Films by Flow Microcalorimetry
Processing Effects on Structure-Property Relationships in Sputter Deposited Thin Gold Films
Elastic Properties of Supported Polycrystalline Thin Films and Multilayers: an X-Ray Diffraction Study
A Problem of Anisotropic/Isotropic Bimaterial with a Singularity or under a Remote Stress
Glide and Climb of Dislocations in Ultra-Thin Metal Films
Characterization of Anodic Films Formed on Mg-Al Alloys in Alkaline Bath
Tailoring of the Elastic Properties by Texture Control in Ferroelectric Thin Films for MEMS
Chemical Vapor Deposition of Cr-Based Thin Films as Diffusion Barriers in Copper Metallization
Thermoelectric Properties of CoSi Thin films
Structural and Mechanical Properties of Stainless Steel Thin Films Elaborated by Thermal Evaporation and Ion Beam Sputtering
Formation of Calcium Phosphate Film on Ti Substrate in Aqueous Solutions in the Control of Temperature and Ion Activity
The Effect of Lattice Strain on the Step Edge Diffusion and Morphological Development during Epitaxial Growth
Evaluation of Interface Strength between Thin Films Fabricated on a Silicon Substrate for an Advanced LSI on the Basis of Fracture Mechanics Concept
TiNi Thin Films for Microactuators and Microdevices: Sputter Deposition and Processing Techniques
The Effect of Grain Boundary Characteristics on Microstructure and Stress Void Evolution in Electroplated and Sputtered Cu Films
Near-Zero-Thickness Self-Assembled Molecular Layers for Future Device Structures: Interfacial Adhesion and Diffusion Barrier Properties
Thermally Activated Flux Creep in High Tc Superconductors
Improved-Trapped Magnetic Fields in Top Seeded Melt Grown YBCO Superconductor Doped with Depleted and Enriched Uranium Oxide
Metallic Buffer Layers for Y-123 Coated Conductor
Copper and CuNi Alloys Substrates for HTS Coated Conductor Applications Protected from Oxidation
Chemical Approach to the Deposition of Textured CeO2 Buffer Layers Based on Sol Gel Dip Coating
Synthesis and Processing of High Temperature Hg-Based Superconductors, from Bulk to Thin Films
Study of the Surface Oxidation Epitaxy of Pure Ni
High Tc Superconductors - From Material to Applications
Epitaxial Growth and High-Frequency Properties of YBa2Cu3O7 Electrodes on LiNbO3
Texture, Microstructure and Stress Investigations in 0.18 μm Damascene Cu Interconnect Lines
The Effect of Grain Growth Suppression on the Interface Population in Nimonic PE16
Fractal Properties of Dynamic Recrystallized Grain Boundaries
Shear Texture Control in Low Carbon Steel Sheet by Differential Speed Rolling
Effect of c/a-Ratio on Crystallographic Texture and Mechanical Anisotropy of Hexagonal Close Packed Metals
Orientation Related Microstructure Evolution during Continuous Annealing of a Cold-Rolled Low Carbon Steel
Grain Size Evolution in Dynamic Recrystallization
Effects of Thermomechanical Processing on Texture Formation in Iron Aluminides
The 3-Dimensional X-Ray Diffraction Microscope and its Applications to Recrystallization Studies
Anisotropy of Tensile Properties of Extruded Magnesium Alloy AZ31
Study of Scale Growth on Steel Substrates Using Electron Back Scatter Diffraction
Oxidation, Crystallization and Diffusion Processes in Basalt
Microstructural Evolution in a Model Fe-30wt%Ni Alloy during Hot Plane-Strain Compression
Microtexture Induced by the Bainitic Transformation in Steels during Welding. Effect on the Resistance to Cleavage Cracking
Relationship between Crystallographic Fabric (Texture) and Elastic Properties of Rocks: Implications from Experiments and Calculations
Thermo-Mechanical Processes in Sapphire Crystals with Different Orientations
Recrystallization Study of a Low Carbon Steel after Tensile Strain
Modeling of Texture and Texture-Related Properties during the Thermo-Mechanical Processing of Aluminum Sheets
Textures Development in Cold-Worked Ferrite-Pearlite Steels by Drawing to Moderate Reductions
Microstructure and Properties of Hot Extruded Brass CuZn40Pb2
Application of the Texture Component Crystal Plasticity FEM to Forming Simulation
Interactive Texture- and Finite-Element Simulation for Modelling of Complex Deformation Processes for HCP-Metals
The Applicability of Conventional Fiber Texture Analysis Techniques in Electron Backscatter Diffraction
Effect of Rolling Temperature on the Recrystallization Texture of Warm Rolled Steels
Influence of Repeating of Partial Annealing and Light Rolling Process on Cube Texture in High Purity Aluminum
Analysis of Texture Evolution in Cold Rolled and Annealed 3%Si-Fe (100)[011] Single Crystal
The Texture Development in the Nb-Microalloyed Steels as an Effect of Intercritical Rolling
Influence of Additives upon Nucleation and Growth of Copper on Titanium Substrates during Electrodeposition
Simulation of Grain Growth Selection during Recrystallization of Highly Cold Rolled Aluminum
Effect of Excess Vacancies on Hydrogen Absorption-Desorption Characteristics in Rapidly Solidified B2 TiCo
Effect of High Magnetic Field during Primary Annealing on Texture of Silicon Steel
Microtextural Analysis of Grain Fragmentation in Aluminum
Increasing Desirable Recrystallization Texture in IF Steel by Controlled Rolling
Revealing a Parent Phase Structure after Transformation Based on Crystallographic Relations
Selective Growth in a Scratched Fe-2.8%Si Single Crystal
Reducing Cube Volume in Recrystallized Texture by Controlling the Finishing Temperature and Rolling Strain in Al-5%Mg Alloy
Shear Band Formation in Warm Rolled IF Steel
Coupled FEM and Microstructure Modeling Applied to Rolling and Extrusion of Aluminium Alloys
Microstructure Engineering for Continuous Annealing of Steels and Aluminum Alloys
Simulation of Microstructural Evolution in Rod Rolling of a Medium C-Mn Steel
Analysis of the Influence of the Initial Billet Geometry and Die Design on the Product Geometry during Bi-Material Tube Extrusion
A Physical Model for Prediction of Microstructure Evolution during Thermo Mechanical Processing
Prediction of Material Flow Pattern in the Hot Extrusion of Aluminium Alloys by the Finite Element Method
FEM Analysis of Hot Forging Process for an Automotive Lower-Arm Connector
A New Approach to Interface Engineering by Using an External Magnetic Field
Process Limits and Material Behaviour in Incremental Sheet Forming with CNC-Tools
Process Control Model for Blast Furnaces
Mathematical Modeling of the Mean Flow Stress during the Hot Strip Rolling of Ti-Nb IF Steels
Modelling Hot Deformation of Al-Zn-Mg Alloy
A Model for the Prediction of Microstructure and Mechanical Properties in Cold Rolled and Annealed TRIP Steels
Research on the Coupling between Electromagnetic Pressure and Temperature Field in Dual-Frequency Electromagnetic Shaping Process
An Investigation on Machinability and Application of Board Materials (BM) in Low Volume Production of Sheet Metals
Modelling of Phase Separation Dynamics in Iron-Based Ternary Alloys
Modelling of Recrystallization and Grain Boundary Migration by Cellular Automata
A Phase Field Model for the Step Dynamics Including Elastic Interactions between Steps
Simultaneous Estimation of Heat Transfer Boundary Conditions during One-Sided Spray Cooling
Recrystallization, Relation between Modelling and Experiment
Data Based Modelling for Prediction and Control of Internal Cleanliness in Steel Strips
Constitutive Modeling of High Temperature Mechanical Behavior of a Medium C - Mn Steel
Incorporating Strain Gradients in Micromechanical Modeling of Polycrystalline Aluminum
Austenite Evolution Modeling in Nb Microalloyed Steels during Thin Slab Direct Rolling
Modeling the Hot Flow Stress of Commercial Purity Coppers with Different Oxygen Levels
A Network Model to Simulate Transient Non-Lineal Thermal Processes in Metals and Alloys with Allotropic Transformations
Mathematical Model for the Residual Stresses Induced during the Heat Treatment of Grinding Balls
Non Linear Behavior Micromechanical Multi-Scale Modelling of Discontinuous Reinforced Composites
X-Ray Microbeam Strain Measurements in Polycrystalline Films
Evaluation of the Influence of Shot Peening Parameters on Residual Stress Profiles Using Finite Element Simulation
Contribution of X-Ray Diffraction to Analyse and Improve the Mechanical Behaviour of Materials
Experimental Analysis and Numerical Simulation at Metal-Ceramic Interface
Residual Stress Measurements of Structural Components by Neutron Diffraction and Proposal Measurement Standard
Stress Determination with High Lateral Resolution Using Neutron Diffraction
Relaxation of Residual Stresses during Fatigue Cycles in Steels
Evaluation of Side Notch Charpy Test on Laser Welded Joint
Finite Element Analysis in Pulsed GTA Weldments
Microstructures at Aluminum - Copper Magnetic Pulse Weld Interfaces
Microstructure and Mechanical Property of Laser Welds of Single Crystal Nickel Base Superalloy CMSX-4
Tensile Properties and Microstructure of Weld Metal of X80 Steel
The Nature of Acicular Ferrite in Ferrous Weld Metals and the Challenges for Microstructure Modelling
Computer Aided Design of Pulsed Arc Welding Ensuring Defectless Joint of Metals
Productivity Gains by Flux Bounded TIG Welding of Aluminum
Possibility of Industrial Application by the Use of Underwater Shock Wave for Explosive Welding of Various Plates
3D-Numerical Model Predicting Penetration Shape in GTA Welding
New Developments in High-Performance Arc Welding Processes
Simulation Model for MAG Arc Welding as an Engineering Tool
Some Aspects of Weldability and Jointability of Duplex Stainless Steels
Microstructural Aspect of Cold Crack Susceptibility in High Strength Weld Metal
Joining of Silicon Nitride by Interposing Metal Foils: Effects of Temperature and Bonding Pressure
Thermodynamic Issues of Lead-Free Soldering in Electronic Packaging
Effect of Activating Fluxes on the Penetration Capability of the TIG Welding Arc: Study of Fluid-Flow Phenomena in Weld Pools and the Energy Concentration in the Anode Spot of a TIG Arc Plasma
Current Problems in Hot Cracking Research Described on the Example of PVR Test
Estimation of Temperature Distribution and Cooling Rate in Arc Welding Using Three-Dimensional Finite Element Analysis
Arc Behavior under Extreme Condition
Processing of Advanced Materials with a High Frequency, Millimeter-Wave Beam Source and other Microwave Systems
Jointing Structures of Some Kinds of Lead-Free Solder on EN/IG Finished Boards
Microstructure Development in Single Crystal Welds
Joining of Steel to Aluminum Alloy by Interface-Activated Adhesion Welding
Development of an Arc Sensor with Mechanized Rotation of Electrode
Electrode Storage Condition Effects on Diffusible Hydrogen in SMAW Deposits
Thermal Analysis and Microhardness Mapping in Hybrid Laser Welds in a Structural Steel
Weld Metal Test Performance Requirements: A Critical Appraisal of Future Needs
The Influence of the Processing Temperature on the Microstructure of γ-TiAl Joints Brazed with a Ti-15Cu-15Ni Alloy
Advances in Processing Technology for Powder-Metallurgical Tool Steels and High Speed Steels Giving Excellent Cleanliness and Homogeneity
Physical Simulation and Analysis of the Hot Workability of a New Powder Metallurgical ''Micro-Clean'' HS-Steel Grade
Characterization by TEM of a Supersaturated P/M Al-Mg-Zr Alloy after Thermal Treatments
Powder Injection Molding of Cemented Carbides
Powder Metallurgy in Tooling - Theoretical Background, Material Production and Processing
Densification of W-Cu Powder with Submicron Size Microstructure
Characterisation from μm to nm Scale for Interface Analysis
Modelling of Hot Isostatic Pressing of Metal Powders
Importance of Ball-Milling for the Sintering of Yttria Dispersed W Alloys
Numerical Simulation of the Fatigue Lifetime of a Powder Metallurgical Gear Based on the Green Density Distribution
Advanced Materials for Micro Powder Injection Molding
Current Status of Micro Powder Injection Molding
Behavior of Reduction and Sintering in Cementite Powder
Properties of AlN Powders Synthesized by Rapid Nitridation of Al Powder in Floating System
Development of Ultrafine Grained Austenitic Stainless Steels by High Strain Powder Metallurgy Process
A New Powder Metallurgical Process for Upgrading Recycling of Fe-Cu Alloy
Integrated P/M Processing for System Design of Nanocrystalline Ceramics
Use of SHS Reaction between Powder and Droplets for Coating, Welding and Freeform Fabrication of Intermetallics
Roles of Potassium Bubbles in High Temperature Creep Resistance of Doped Tungsten Fine Wires
The Application of Hot Forming to Influence the Properties of P/M Aluminium Basis Materials
Micro Powder Injection Molding of Metal Microstructures
Extrusion and Thermo-Chemical Processing of Layered Linear Cellular Alloys
Processing and Properties of Multiphase Mo-Si-B Alloys
Structure and Properties of Consolidated Attrition-Milled Al-5%Ti PM Specimens
Advances in MA Aluminium Powders Consolidation by Mechanical Cold Pressing and Vacuum Sintering
Processing of Advanced Shape Memory Materials by Powder Metallurgy
Preparation and Characterization of Three Fe-M (M = Ni, Zr, Nb) Based Alloys Produced by Mechanical Alloying
Effect of Mg as Sintering Additive on the Consolidation of Mechanically Alloyed Al Powder
Influence of Carbon Activity and Oxygen Potential of Sintering Atmospheres on the Microstructural Characteristics of Low Alloy P/M Steels
Ni Diffusion Process between Austenite and Ferrite in a Sintered Duplex Stainless Steel Obtained by Powder Mixing
Optimization of the Synthesis of Soft Magnetic Materials by Mechanochemical Process at Room Temperature
Oxidation Behaviour at High Temperature of Ferritic Stainless Steels Manufactured by Powder Metallurgy
Metal Injection Moulding (MIM) of M2 High Speed Steel Using a Polyethylene Based Binder
Low-Temperature and High-Temperature Corrosion Behaviour of Powder Metallurgical Duplex Stainless Steels
SHS Production, Processing and Evaluation of Advanced Materials for Wear-Resistant Cutting Tools
Orientations and Tendencies in Manufacturing Industry of the Permanent Ceramic Magnets Using PM Technologies
Strain-Rate Dependence of Dynamic Twin Nucleation at Triple Junction in Copper
The Influence of Grain Size on Deformation of Copper
Structure and Mechanical Properties of Materials in the Temperature Ranges of Cold, Warm and Hot Deformation
The Crystallization, Structure and Work Hardening of Casting Fe-N-V Alloys
Mechanical Properties of Grain Boundaries and Triple Junctions in Metals
Hot Working of an as-Cast Mg-2%Al Alloy
Plastic Deformation and Stress-Induced Phase Transformation in Polycrystalline Diamond: Common Phenomena?
Elastic Stability and the Limits of Strength
Change of Elastic Constants of Pure Iron Deformed by Cold Rolling
A New Theoretical Determination of Yield Stress Based on Efficient Area of Stress and Universal Fractal Power Law
Formability Criteria for Cold Heading Applications
Microstructure Evolution of Hot Rolled W Sheets after Different Heat Treatments
Influence of Multi-Step Nitriding Condition upon Mechanical Properties of Dilute Mo-Ti Alloys
Materials Selection for Solid Oxide Fuel Cells
Fatigue Behavior of Glass Ceramics in Water Environment
Influence of Neutron Irradiation on Hardening and Embrittlement Phenomena in Reactor Pressure Vessel Cladding Material
Correction of CTOD Toughness for Constraint Loss in Structural Components
Improvement in Mechanical Properties of Hydroxyapatite Objects with Controlled Porosity Made by Modified Gelcasting Process
Sol-Gel-Derived Nano-Porous Glasses with High Proton Conductivity
Study on Segregation-Dezincification Relationship in Bi-Se-Bearing Brasses
Calorimetric and X-Ray Measurements in Ultrafine-Grained Nickel
Peculiarities of the Mechanical Behavior of Metallic Glasses Investigated by Indentation Techniques
Numerical Cutting Sensitivity Study of Tool-Chip Contact
Unified Formulation to Predict the Tensile Curves of Steels with Different Microstructures
Portable X-Ray Apparatus for Stress Measurements
Computer Simulation of Change in the Chemical Composition of Coke Ash in the Blast-Furnace
Effect of Boron on Lamellar Grain Refinement and Lath Formation in Wrought Processed Gamma TiAl Alloys
Modelling of Homogenisation of AA3103
Measurement of γ/γ' Lattice Mismatch in Creep Deformed Single Crystal Superalloy SC16 Using Synchrotron X-Radiation
Double Bladed Effect of Re on High-Temperature Oxidation and Hot-Corrosion of Nickel-Based Superalloys
Microstructural Evolution during the Hot Deformation of Magnesium Alloy AZ31
Thickness of Pancake Austenite Controlling the Size of Ferrite Transformed from Variously Deformed Austenite
Microstructure and Thermal Stability of Lamellar Cr-Silicides
Microstructure of M-W (M = Fe, Ni) Alloys Produced by Electrodeposition and Mechanical Alloying
Structure and Mechanical Properties of In-Situ Discontinuously Reinforced Composites of Ti-TiB-System
Microstructure and Properties of Aluminum Friction Stir Welds
Grain Refinement under Multiple Warm Compression in an Al-Mg-Sc Alloy
Thermo-Mechanical Processing Improvements: Benefits and Costs
Ecomaterials; Concept, Practice and Future
Eco-Benign Mesoporous Materials for Organic Reactions
Cost Reduction in Titanium Production and Processing
Precipitation Strengthening of Fully Lamellar Gamma-TiAl Alloyed with Carbon and Silicon