- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
During the past two decades, China (whose very name of course has long been synonymous with 'ceramic' in the English language) has continued its ancient history of technological excellence in this field by also becoming one of the most active centres of scientific excellence in the field of high- performance ceramics. Building upon the success of the first conference in the series, the Second China International Conference on High-Performance Ceramics (CICC-2) offered an international forum for the presentation, discussion and review of the latest advances in the science and technology of high-performance ceramics.
Contents
Microwave Dielectric Properties of Columbite-Structure Niobate Ceramics, M2+Nb2O6
Microwave Dielectric Properties of CaF2-Doped ZnNb2O6 Ceramics
Microwave Ceramics of Nd-Ba-Ti-O System for Wireless Technology
Low-Temperature-Fireable Microwave Dielectric Ceramic (Pb0.45Ca0.55)[(Fe1/2Nb1/2)0.9Sn0.1]O3 with Addition of CuO-V2O5-LiF
Dielectric Loss of Oxide Single Crystals and Polycrystalline Analogues from 10 K to 300 K
Zinc Silicate — Alpha-Quartz — Borosilicate Glass Composite for High Frequency Ceramic Multilayer Parts
Aspects Determining the Dielectric Properties of SiC-Based Ceramic Grain-Boundary Capacitors
Low Dielectric and High Frequency Glass-Ceramic in the System CaO-B2O3-SiO2
Low Dielectric Constant Borophosphosilicate Glass-Ceramics Doped with PbF2
Effects of Sintering Temperature on the Dielectric Properties of BaTiO3 Based X7R Ceramics
Characteristics of Grain Boundaries of PTCR Ceramics under DC Bias
Effects of Rare Earth Elements on the Dielectric Properties of BaTiO3-Based X7R Materials
Charge Compensation in ZnO-Ln2O3 Co-Doped Barium Zirconate Titanate Ceramics
Graphite and Resin Doped BaTiO3 Based PTCR Composite Material
Dielectric Properties of Doped BaTiO3 Ceramics under DC Bias
Preparation of Lower Room Temperature Resistance of PTC Type Barium Titanate Ceramics by Multilayer Structure
The Relationship between PTCR Effect and Donor Content in Yb-Doped BaTiO3 Ceramics
Influence of Sintering Atmosphere on PTCR Effect of Y and F Doped Barium Titanate
Effect of SrLi1/4Nb3/4O3 Additive on the Properties of PbxSr1-xTiO3 Ceramics
Low Temperature Sintering of PMN Ceramics by Doping with SrO
Dielectric Properties of Pb(Mg1/3Nb2/3)O3-PbTiO3 Ferroelectric Ceramics near the Morphotropic Phase Boundary
Aging Behavior and Mechanism of PMMN-PZT Quaternary Piezoelectric Ceramics
Effect of Sintering Conditions on the Reliability of PMN-Based MLCC against Electroplating
Influence of Temperature on Electric Fatigue of 0.3PZN-0.7PZT Piezoelectric Ceramics
Electro-Mechanical Properties and their Temperature Dependence for PMS-PZ-PT Doped with Sr2+
Microstructure-Property Linkages in Multi-Phase Ceramics
Fabrication of Ceramic Polymer Composite by Nd: YAG Laser
Piezoelectric Behavior of Biomaterials
Analysis and Measurement of the Vibrations of Multilayer Piezoelectric Transformer
Piezoelectric Ceramic Vibration Modes and Potential Applications
A Quantitative Circuit Model of the Stator of Piezoelectric Ultrasonic Motor
Magnetic Properties and Giant Magnetoresistance of SrFeO2.95
Effect of Crystal Growth on the Electrical and Magnetic Properties of Lithium Silicate Glass Containing V2O5
Co-Firing Behavior and Interfacial Structure of Dielectric/Ferrite Composites for Multi-Layer LC Filters
Optimisation of Hydrogen Treatment of Strontium Hexaferrite Powder
The Key Materials Used for Reduced Temperature Ceramic Fuel Cells
Analysis of the Ionic Conduction in Y2O3-Stabilized ZrO2 at Low Temperatures by Impedance Spectroscopy
Grain-Size Dependence of the Grain-Boundary Conductivity of Zirconia Stabilized by Y2O3 and CaO
Preparation and Performance of IT-SOFC with Anode-Supported Thin GDC Electrolytes by Tape Casting Process
Fabrication of Ceria-Based Electrolyte by Gel-Casting
Superionic Conductors of Ca2+ and La3+ β(β'')-Alumina
Study on Oxygen-Sensing Properties of La-Ni-O Composite Thin Film
Superconducting Array Device and Bicrystal Grain Boundary Junction
Barium-Filled Skutterudite: A High Performance n-Type Thermoelectric Material
High-Temperature Thermoelectric Properties of Liy(TixNi1-x)1-yO Ceramics
Study on Antibiotic Properties of Calcium Oxide Doping Silver
Characteristics of Ag-Loaded Antibacterial Silicon Dioxide
Preparation and Properties of TiO2 Photocatalytic Thin Film
Preparation and Properties of SiO2 Thin Films Derived from Polysilanes Treated with Oxygen Plasma
High Surface Area Ceramic Semiconductor SnO2 Gas Sensor
Preparation of SrAl2O4:Dy, Eu Phosphor by Sol-Gel Processing and its Luminescent Properties
Preparation and Study of UV-Absorbing Multi-Layer Films
Preparation and Thermal Property of the Acicular Mg,Al-Hydrotalcite
A New Method of Nano-Crystallization of Amorphous Alloys
Sintering and Properties of AlPO4-CrPO4 Mixtures
Microstructural Tailoring and Mechanical Properties of Ca α-Sialon Ceramics
Effect of Dual Elements on Formation Behavior of Multi-Cation α-Sialons
Microstructural Evolution of Sialon Reinforced with Rod-Like Y α-Sialon Crystalline Particles
Toughening Y α-Sialon Ceramics by Using New-Developed Rod-Like Y α-Sialon Crystals as Reinforcing Agents
β-Sialon -Al2O3-SiC Composite Refractories
Mechanism of Synthesis of β-Sialon from Coal Gangue
Investigation of the Preparing Process and Mechanical Properties of Alumina-Mullite Refractory with the Reinforcement of Sialon
Formation Mechanism of Intragranulars in Nano-Scale/Micron ZTA Composites Ceramics
Mechanical Properties of ZTA Formed by Gelcasting
Microstructure and Mechanical Performances of High Strength ZTA/LaAl11O16 Composites
Mechanical Properties and Microstructures of Sintered Zirconia Ceramics Implanted by Titanium Ions with MEVVA Sources
Toughening of Reaction-Bonded Silicon Nitride Ceramics Through Microstructural Design
Mechanism of Toughening in TiC Particulate Reinforced Al2O3
Toughening Ceramics by Adding two Toughening Agents
Pressureless Sintering of Nickel-Alumina Composite Ceramics
Bending Strength Recovery and Crack Healing Behavior of Al2O3/SiC Nanocomposites at Different Annealing Temperatures
Fabrication and Mechanical Properties of Al2O3/5 Vol% Ni Composite by a Powder Coating Technique
Microstructure and Mechanical Properties of Al2O3/SiC Nanocomposites Prepared by SPS
Fabrication, Microstructure and Mechanical Properties of In Situ Al2O3 Platelets Reinforced Ce-TZP Composites
Fabrication and Mechanical Properties of Al2O3-Ti3SiC2 Composites by SPS
Effect of Na2O on the Mechanical Properties of MoSi2/Oxide Composites
Electronic Structure and Bonding Properties of the ZrO2/Ni Interface
Synthesis of SiC from Low Metamorphic Coals and SiO2
A Study on Formation of Ti3SiC2 Synthesized by Elemental Powders
A Novel Whisker of α-MoO3: Characterization and Growth Mechanism
Synthesis of MgAlON from Al-Al2O3-MgO by Reaction Sintering
Hydration Kinetics of CaO-MgO Clinker After Surface Treatment Through H3PO4 or Al(H2PO4)3 Solution
The Influence of MgO, CaO and BaO Additives on the Microstructure and Mechanical Behaviour of Aluminosilicate Ceramics
Silicon Nitride Tri-Layer Composites Prepared with Sheets with and without the Aligned Whisker Seeds
Effects of Additive to BN Interlayers on Microstructure and Properties of Laminated Si3N4/BN Ceramic
Microstructure and Mechanical Properties of Cross-Plied SiC Whisker-Reinforced Si3N4/BN Fibrous Monoliths
Influence of Interlayer on Mechanical Properties of Laminated Ceramic Matrix Composites
Preparation of Al2O3/TiSiC2 Multilayer Materials by In-Situ Synthesis
Manufacture and Analyses of Ceramic/Aluminum Laminated Composites
Interfaces in Bioceramics: Surface Energetics & Interfacial Interactions
Structure Design and Evaluation of the Osteoinduction of the Bioactive Gradient Coating
Bioactivity and Biocompatibility of Plasma Sprayed Calcium Silicate Coatings
Preparation and Design of Artificial Bone Scaffolds via a Three-Dimensional Gel-Lamination Process
Hydroxyapatite Artificial Bone Prepared via a Three-Dimensional Gel-Lamination Route
Preparation of the Porous Hydroxyapatite Ceramics by a Stereo-Mold Method
Effect of Fluorine Content on the Crystallization and Flexural Strength of Fluorosilicic Mica Glass-Ceramic
Changes of the Mechanical Properties during Crystallization of CaO-P2O5-SiO2-MgO-F- Glass Ceramics
Damage Characterization of Dental Materials in Ceramic-Based Crown-Like Layer Structures
New Progress of Ceramic-Based Functionally Graded Plasma-Facing Materials in China
A Novel Processing Method for the Microstructural Design of Functionally-Graded Ceramic Composites
Fabrication and Poperties of Al2O3-SrTiO3 Dielectric Functionally Graded Materials
Sintering Uniformity of Gradually Layered SiC/TiC Composites
Design, Fabrication and Characterization of Machinable Al2O3/LaPO4 Functionally Graded Materials
Fabrication of W-Mo Functionally Graded Materials with Smooth Changes of Composition by Co-Sedimentation
Preparation of Composite Flier-Plate Materials with Graded Density for Quasi-Isentropic Compression
Layered and Graded Alumina-Based Hybrid Composites by Infiltration Processing
Characteristic Wave Impedances of W-Mo System Composites
Effect of Mo Addition on the Wettability between Ni3Al and TiC
Depth-Profiling of Phase Composition and Texture in Layered-Graded Al2O3- & Ti3SiC2-Based Systems Using X-Ray and Synchrotron Radiation Diffraction
Synthesis, Modification, and Host-Guest Effect of the Nano-Structured Mesoporous Materials
Incorporation of Cerium into Mesoporous Zirconium Oxide via Post-Grafting Method
In-Situ Reactive Synthesis of AlN-SiC Composites and Solid Solutions
Preparation of Nano Titanium Nitride-Alumina Composite Powder by Heterogeneous Precipitation
Synthesis of Ultrafine Aluminum Nitride Powder by a Low-Temperature Carbothermal Reduction Process
In-Situ Synthesis of Aluminum Nitride
Kinetic Process of Combustion Synthesis of Ternary Carbide Ti3AlC2
Manufacturing SiC Micro-Powder by Reactant Conduction
Electrochemical Modification of β-SiCp and its Anti-Electromagnetic Radiation Characteristics
Preparation and Characterization of Nano-Scale Y2O3-ZrO2 Powder by Heterogeneous Precipitation
Distribution of MgO in MgO-ZrO2 Powders from Coprecipitation
Catalytic Reduction of Magnesia by Carbon
Surface Defection of TiO2 Particles by High Temperature Vapor Reduction Method
Synthesis of Nanosized TiO2 by Hydrolysis of Alkoxide Titanium in Micelles
Preparation and Characterization of Nano-TiO2 Powder
Low Temperature Solid-State Synthesis of Apatite Ceramic Powder
Synthesis of HAp-ZrO2(3Y) Nano-Powder by Heterogeneous Precipitation Method
The Effect of Hydrogen and Nitrogen on the Magnetically Nature of Sr-Hexaferrite Powder
Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels
Nano-Sized Bi4Ti3O12 Powder Prepared by the Hydrolysis Process
Synthesis of LiCoO2 Powder by Auto-Ignited Combustion of Citrate-Metal Nitrate Precursor
Preparation of Nano-TiO2 Particulate Film from Crystalline Sol
An Experimental Study on Combustion Synthesizing of Plane Ceramic Coating
Powders, Fibers, Thin Films and Aerogels: Sol-Gel-Derived Piezoelectric Materials
Fabrication of Tailored Alumina-Based Ceramics Through Colloidal Processing
Study of Laminated SiC Composites Through Aqueous Tape Casting and Lamination Process
Direct Coagulation Casting via Increasing Ionic Strength
Tape Casting of Aluminum Nitride Substrates
Alumina Gelcasting with a New Low-Toxicity System
Freeform Fabrication of Aqueous Alumina-Acrylamide Gelcasting Suspensions
Effect of Spinning Techniques on the Mechanical Properties of Polymer-Derived Silicon Carbide Fiber
Suppression of Surface-Exfoliation by Gelcasting Ceramics with Mixed Polymer-Monomer Solutions
Stabilizing Nano Zirconia Suspensions Using Polyacrylic Acid: Adsorption, Rheology and Interparticle Forces
Colloidal Injection Moulding of Ceramics
Study on Slip Casting Reaction Sialon Suspension
Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si3N4 Aqueous Suspension
Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories
Influence of Coupling Agents on the Chemical Compatibility between Ultrafine Si3N4 Powders and Organic Binders
A Computational Simulation of Interaction between Polyelectrolyte and Ceramic Particles
Manufacturing Miniature Si-Based Ceramic Rotors by Micro Reaction Sintering
Ti-Ni System Phase Transition in SHS
Preparation of SiC Ceramics by Spark Plasma Sintering
SPS Temperature Distribution of Different Conductivity Materials
Effects of Initial Density of Green Compact on Hot-Press Sintering and Superplastic Forming of Nano 3Y-TZP
Low-Temperature Pressureless Sintering of SiC Ceramics with Al2O3-Y2O3-La2O3 Addition
Heterogeneous of Non-Conductive Materials Sintering by Pulse Electric Current
Application, Development and Prospects of After-Treatment Technology in Conventional Abrasive Materials
Kinetics of Carbon Monoxide Decomposition in Refractories
Analysis of the Aluminothermic Reaction Process
Wettability of SiC/Liquid Cu with Ti Additive System
Bonding Al on Al2O3 Substrate
Taking into Account the Variation of Fracture Mechanisms for Modelling the Toughness of Porous Sintered Glass
Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride
The Dynamic Fatigue Behavior of Si3N4 at Different Temperatures
On the Static Fatigue Test Results of Silicon Nitride Ceramics
Determination of the Confidence Interval of Weibull Modulus Estimated with Small Data Set
Synthesis and Oxidation of Bulk Ti3AlC2
High Temperature Oxidation and Hot Corrosion Behavior of Ti3SiC2-Based Materials
Oxidation of AlN with Cryolite Adition
The Cyclic and Continuous Oxidation of Si3N4 with and without Aluminum Implantation
The Thermal Transient Stress Maximum during Quenching of Ceramics: A Comparison of Experimental Data with Numerical Simulation
Study on Thermal Conductivity of Si3N4 Sintered with Y2O3-MgO Additive System
Low Thermal Expansion Behavior of ZrTiO4-Al2TiO5 Ceramics Having High Thermal Durability between 750 and 1400oC
The Simulation of Thermal Insulation Property of Ceramic Fibers
Thermal Properties of Cobalt Cadmium Ferrites
Quantitative Non-Destructive Evaluation (QNDE) of the Elastic Moduli of Porous Al2O3
