- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This two-volume set of 339 peer-reviewed papers covers the broad areas of Composite, Polymer and Ceramic Materials, Fracture Mechanics and Mechanisms, Materials, Mechanical Structure, Strength and Dynamics, Interface Failure and Failure Analysis, Nano-Mechanics and Structures, Damage and Failure, Structural Design and Optimisation, Fatigue and Crack Propagation, Materials Modelling and Computation, Concrete, Rock and Soil, Dynamic Fracture and Impact, Erosion and Corrosion, Smart Materials and Structures, Biomechanics and Other Novel Methods of Computer Modelling in Engineering and Science.
Contents
Preface, Acknowledgements, Committee
Mechanical Behavior of 2D C/SiC Composites at Elevated Temperatures under Uniaxial Compression
Newly Designed Adhesive Joint for Torque Loaded Tube
Comparing Study of Energy-Absorbing Behavior for Honeycomb Structures
Electrically Conductive Fibers/Yarns with Sensing Behavior from PVA and Carbon Black
Fracture and Plasticity in Nano-Porous Particle-Polymer Composites
The Effect of Aging and the Protective Coating on the Oxidation Behavior of 6061Al/SiC Composite at High Temperatures
Fatigue Damage Mechanism Analyses of Oriented Sheets of Polymethyl Methacrylate Glasses
An Approach for Landslide Stability Evaluation by Numerical Method
The Stress and Strain Concentrations Associated with Two Interacting Holes in a Finite Thickness Elastic Plate Subjected to Tensile Stress
Crack Closure Behavior under High-Load Ratio for AISI 4340 Steel
Analytical Concepts for Recent Development in Fatigue Crack Growth under Variable Amplitude Loading. Part I: Qualitative Interpretation
Effect of Static Pre-Strain on Low Cycle Fatigue Life of AISI 316L Stainless Steel
Effect of Ni Content on Dissolution Properties of Cu in Molten Sn-Ag-Cu-Ni-Ge Alloy
Analysis of Stress-Strain Hysteresis Loop and Prediction of Thermal Fatigue Life for Chip Size Package Solder Joints
Effect of Ag Content on Mechanical Properties of Lead-Free Sn-Ag-Cu-Ni-Ge Alloy
Buckling Analysis and Optimization of Stiffened Cylindrical Shells under Uniform Axial Compression
Influence of Strength Level of Steels on Fatigue Strength and Fracture Morphology of Spot Welded Joints
Effect of Material Composition on Mechanical Properties of Ceramics-Metal Composite Materials
Three-Dimensional Stress Analysis by a Digital Image Correlation Method and the Three-Dimensional Local Hybrid Method
Development of the Auto Mesh Generation Program for a Digital Image Correlation Method
Damage Assessment of a Structure by a Digital Image Correlation Method
Vibrational Fatigue Analysis of a Strain Loading Using the Frequency and Wavelet Filtering Methods
Analysis of an Instrumented Charpy Impact Using Power Spectrum Density
Effect of Notched Parameters on Low Cycle Fatigue Life of Shaft with Annular Notch under Cantilever Bending
Calculation Stress Intensity Factor for Asphalt Pavement Basing on Weight Function Theory
Influence of Processing Parameters on Electrophoretically Deposited La0.6Sr0.4Co0.2Fe0.8O3-δ Films
On the Crack Propagation Trajectory of Central Cracked Plates under Mixed Mode Loading Conditions
Finite Element Analysis of Indentation Cracks for Brittle Materials under Static Loading
Effect of Notched Parameters on Stress Field of Shaft under Torsional Loading
Effects of Locations of Adhesive Hollows on Interfacial Stress
Propagation Behavior of Interfacial Fatigue Cracks in RC Beams Strengthened with Pre-Stressed FRP
Analysis of Concrete Early-Age Shrinkage Based on the Theory of Humidity Diffusion
Fatigue Strength Degradation by Irreversible Hydrogen in Cold Drawn Eutectoid Steels
Stress Distribution Analysis on Four Types of Stress Corrosion Cracking Specimen
Elastic-Plastic Flange Wrinkling of Circular Plates in Deep Drawing Process
Mechanical Properties of Carbon Fiber Reinforced Plastics under Hot-Wet Environment
Comparison on Compressive Behaviour of Aluminium Honeycomb and Titanium Alloy Micro Lattice Blocks
Analysis of Mechanical Performance of Crumb Rubber Concrete by Different Aggregate Shape under Uniaxial Compression on Mesoscopic
Optimising Real-Time Performance of Genetic Algorithm Clustering Method
Pre and Post Processing for Boundary Element Method (BEM) 3D Reinforced Concrete Corrosion Simulation
Durability Assessment of Quad Flat No-Lead Package Using Signal Analysis
Inelastic Seismic Response of RC Building with Control System
Effect of Interfacial Reaction in Sn-Ag-Cu Solder Alloy with Ni Addition
Study on Joint Deflection of Existing Joint Plain Concrete Pavement upon Adoption of Hot Mixture Asphalt Overlay
Effect of Beam Height on Elastic Impact Load Subjected to Transverse Impact of Bar
Performance of the Casing-Plug Joints of Square Steel Tube Structures
Out-of-Plane Secondary Bifurcation Buckling Behavior of Elastic Circle Pipe Arch
Fracture Analyses for Interface Corners in Elastic Materials Subjected to Thermal Loading
Necking Prediction in Tube Hydroforming by Stress-Based Forming Limit Diagrams
Finite Element Analysis of 4-Step 3-Dimensional Braided Composite Structure under High Velocity Impact
Experimental Investigation of Residual Thermal Stress in Thermal Barrier Coating (TBC)
Numerical Analysis of Elastoplastic Behavior of Foams with Ellipsoidal Pores
Effect of Aluminum Nitride (AlN) Addition on Wear and Mechanical Properties of Al-Si Alloy Composites Fabricated by Stir Casting Process
Characterisations of Cu-Based Coated Al7075 via Plasma-Spray Technique
Stability Analyses of an Earth Dam Using Limit Equilibrium and Finite Element Methods
Premature Failure of Gas Turbine Blade
A New Realization on Electro-Elastic Love Waves In Piezoelectric Layered Solids
The Development of Validation Technique in Variable Amplitude Loadings Strain Repetitive Data Collection
Micro-Hardness and Residual Stress Relaxation of 2024 T351 Aluminum Alloy
The Resistance of Metallic Sandwich Plates to Blast Loading
Effect of Aqueous Environment on High Cycle and Very-High-Cycle Fatigue Behavior for a Structural Steel
Estimation of Elastic Follow-Up in Structures
Failure Analysis of a Herringbone Gear
Effect of Boundary Conditions on Transient Response of Sandwich Plates with Electrorheological Fluid Core
Structural Similitude between Vibration Response and Flutter Boundary of Cross Ply Composite Plates
Thermal Cycling Induced Crack Nucleation and Propagation in Thermal Barrier Coating System
Effect of Spinel Growth on the Delamination of Thermal Barrier Coatings
Numerical Simulation of Dislocation-Precipitate Interactions Using Dislocation Dynamics Combined with Voxel-Based Finite Elements
Prediction of the Mechanical Properties of Hot-Rolled Low Carbon Steel Strips in Correlation to Chemical Compositions and Rolling Conditions
Development of Tensile Test to Investigate Mechanical Adhesion of Thermal Oxide Scales on Hot-Rolled Steel Strips Produced Using Different Finishing Temperatures
Application of BEM for Improving Corrosion Assessment of Public Building Stricken by Tsunami Aceh 2004
Microstructural Behaviour Study and FEA-Based Fatigue Simulation on Parabolic Leaf Spring
Molecular Dynamics Simulation of Dislocation-γ-Precipitate Interactions in γ'-Precipitates
Stress Corrosion Cracking Analysis under Thermal Residual Stress Field Using S-FEM
Surface Crack Mesh Generation with Factory Roof under Mixed Mode Loading Using a Tetrahedral Element
Ductile Fracture Simulation of Pipe under Bending with Initial Defects
Influence and Sensitivity of Inertial Effect on Void Growth Behavior in Ductile Metals
Far Field Solution of Circular Inclusion and Linear Crack by SH-Wave
Fatigue Data Analysis Using Continuous Wavelet Transform and Discrete Wavelet Transform
Failure Analysis of Steel Superheater Tube Fractured in a Boiler of a Power Plant
Durability Analysis of an Automobile Coil Spring Using Hybrid I-Kaz
A New Static Nonlinear Procedure for Assessment of Seismic Performance of High-Rise Buildings
A New S-N Curve Model of Fiber Reinforced Plastic Composite
Observing Load Sequence Effects on Simulated and Experimental Fatigue Crack Growth Occurrence
Steady-State Crack Propagation in Stressed Elastic Solid
Simulation and Experimental Analysis of Fatigue Crack Growth under Cyclic Loading
Acceleration, Retardation and Crack Arrest in Stressed Heterogeneous Structures
Application of Precise Integration in Dielectric Layer PBG Structure in a Waveguide
Green's Function Solution of the Semi-Space with Double Shallow-Buried Inclusions
Bird Impact Analysis of Wing Leading Edge Structure Based on SPH Method
Stress Relaxation and Fatigue Characterisation of Eutectic SnPb Solder Alloy
Life Prediction of Rubber Automotive Components Using Finite Element Method
Investigation of Creep Fatigue Crack Propagation in Aluminium Tube
Finite Element Analysis of Rate- and State-Dependent Frictional Contact Behavior
Effect of Specimen Width on the Contact State between the Three-Point Bending Specimen and Supports in Hopkinson Bar
Effect of Crack on Interfacial Stresses of RC Beam Strengthened with CFRP
The Effect of Thermal Prestress on the Deformation of Micromirror Chip Embedded with Through-Silicon Vias
Seismic Response Evaluation of RC Tower Connected to Short Rigid Buildings
Strength Properties of Cellulose Nanofiber Green Composites
A Computational Study of the Overload Characteristic Curves of Projectile Penetrating Concrete
Influence of the Rise Time and Decay Time of Stress Wave on Spalling Process of Rock-Like Material
Influence of Heat Treatment on Characteristic Behavior of Co-Based Alloy Hardfacing Coatings Deposited by Plasma Transferred Arc Welding
Numerical Simulation of Reflective Crack Forming in Semi-Rigid Asphalt Pavement Subjected to Traffic Load
Large Scale Elasto-Plastic Analysis Using Domain Decomposition Method Optimized for Multi-Core CPU Architecture
Prediction of Safety Factor for Slope Designed with Various Limit Equilibrium Methods
Mixed Mode Partition in one Dimensional Fractures
Thermal Stress and Thermal Cycling Analyses of Microgyroscope Chip Models
Parallel Eigen Frequency Analysis Using Enriched Free Mesh Method
Experimental Determination of Fatigue Life of Automotive Jounce Bumper
Analytical Solution for Pin-Supported Metal Foam Core Sandwich Beam with Local Denting
Effects of Al2O3-13% TiO2 Coating Particle Size on Commercial Mild Steel via Plasma Spray Method
Elastic-Plastic Analysis of Surface Crack in Round Bars under Torsion
The Study on Fatigue Crack Propagation in Metal Using Finite Element Analysis
Fatigue Failure Analysis Using the Theory of Critical Distance
Solution for Geometrically Non-Linear Elastic Deformation of Simple Frames by a Shooting Method
The Influence of Torsional-Rigidity Bounds for Composite Shafts with Specific Cross-Sections
A Novel Approach to Determine the Elastic Properties of the Interphase between the Aggregate and the Cement Paste
Data Fusion of Probabilistic Full-Field Measurements for Material Characterization
Effect of Plasma Spray Variables on Cu-Ni Coated A7075
Failure of Composites with Discontinuous Fabric Preform under Bending
Numerical Simulation and Experimentation of Warm Metal Powder Compaction Process
Phase Field Simulation of Ferroelectrics with Cracks
Cracking of NiTi Thin Films Deposited on Cu Substrate
Dynamic Response of Metallic Square Honeycomb Sandwich Plate Subjected to Blast Loading
Mechanics of Composite Delamination under Flexural Loading
Research of Surface Deformation with Metro Double Tunnels Construction and the Relative Position Change
Effect of Sandblasting and Surface Mechanical Attrition Treatment on Surface Roughness, Wettability, and Microhardness Distribution of AISI 316L
Experimental Investigation on Mechanical Behavior of Moso Bamboo Vascular Bundles
Surface Modification of Pure Titanium by Nitrogen Ion Implantation at Different Beam Energy and Dose
Evaluation of Plastic Deformation and Fracture Behaviors by Thermal Image Technique
Numerical Application in Weight Reduction of Lateral Plate of Rescue Robot
Strength and Fracture Characteristics of SUS304/AL-Alloy Scarf Adhesive Joint with Various Adhesive Thicknesses
Damage Analysis and Simulation of Rock under High Pressure Waterjet
Simulation of a Bio-Adhesion System with Viscoelasticity
Numerical Simulation of Rock Fracture under High Pressure Water Jet
Main Crack Propagation Behaviour of RC Beams Strengthened with CFRP under Fatigue Load
Fatigue Failure Behaviour Study of Automotive Lower Suspension Arm
Mathematical Modeling for Longitudinal Displacement of a Straight Continuously Welded Railway Track and its Numerical Implementation
Investigation of the Correlation between IC Chip Pick-Up Performance and Peeling Behavior of Adhesive Tapes
Auto Adjust Masses of Automotive Structures with Desired Centre of Gravity
A Theoretical Study on the Influence of Frequency on the Dynamic Characteristics of Air Film
Investigation on Behavior of Rock-Socketed Retaining Piles for Deep Excavation
Experimental and Numerical Investigation of Rubber Extrusion Forming for Multi Material Automobile Weather Strip
Flexural Wave Localization in Randomly Disordered Periodic Beams with Axial Load
Free Vibration of Tire Road Contact
Effect of Interfacial Reaction on Joint Strength of Semiconductor Metallization and Sn-3Ag-0.5Cu Solder Ball
Solid-Liquid Flows Simulation for Debris Avalanche Analysis
Implementing an Open-Architecture Controller for a Tension-Compression Fatigue Test Machine
Shrinkage Cracking of High Performance Concrete Mixed with Steel Slag Admixture
Research on Pre-Loaded Composite Irradiated by Laser Beam
Sensitive Analyses of Probabilistic Fracture Mechanics for Reactor Pressure Vessel during Pressurized Thermal Shock and Comparison with the Results of International Round Robin Analyses in Asian Countries
Web Add
Pattern Recognition of Impact in Passenger Car Bumper Using Smart Materials
Flexibility Analysis of the Welded Metal Bellows of Mechanical Seal
Fully Automated Mixed Mode Crack Propagation Analyses Using VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite Element
Creep Deformation Characteristics of Austenitic Stainless Steel Foils
Characterization of Shot Peened 2024-T351 Aluminum Alloy
Non-Destructive Techniques (NDT) in Composite Materials
The Effect of Eva on Composite that Made of PP Nanoclay
Study of Abrasive Wear Mechanism through Nano Machining
Analysis of Coconut Carbon Fibers for Gas Diffusion Layer Material
Effects of Different Die and Epoxy Thickness to the QFN Package
Durability of R/C Structures under Mechanical and Environmental Action
Study on Complex Structure Mesh Generating of Hexahedron Element Based on Improved Waveform Mesh Generating Method
Development of Universal Test Method to Evaluate the Plastic Deformation of Sheet Metal
Effect of Aging Treatment on Microstructure and Mechanical Properties of Al-Si Matrix Alloy Reinforced with High Purity Aluminum Nitride (AlN)
Influences of Crack Face Bridging Stress and Microstructure on Fracture Toughness of Toughened Alumina Ceramics
Study of Inner Micro Cracks on Rolling Contact Fatigue of Bearing Steels Using Ultrasonic Nano-Crystalline Surface Modification
Study on Numerical Simulation Method of Periodic Symmetric Struts Support Coupling with Heat Flow and Solid
Study on Parametric Modeling Method for FEA Model of Periodic Symmetric Struts Support
Abrasion and Erosion-Corrosion Behavior of Al-Mn Alloy Matrix Composites Reinforced with Al2O3 Particulates
Impacts of Process Parameters on the Substrate Distortion of PAW-Based Rapid Prototyping
Effect of Mesh Size of Finite Element Analysis in Modal Analysis for Periodic Symmetric Struts Support
Study on Dynamic Response and the Effect to Center Level Height of Periodic Symmetric Struts Support
SPH Method for Simulation of Wind-Blown Sand Movements
New Developments in Electrochemical Finishing
Numerical Study on Aeolian Sand Ripples Forming and Moving Process in Desert Highway
Dynamics and Numerical Modeling of Sandy Desert Morphology Caused by Aeolian Transport of Sand Particles
Effect of Uyghur Sand Therapy on Femur Bending Mechanical Properties in Rabbit and the Finite Element Analysis
Analytical and Numerical Investigation of Fatigue Crack Growth in Aluminum Alloy
The Model of Specimen Transverse Inertia Influence on Testing Result of Dynamic Character of Rock
Extracting the Features Point Data Based on the FE and RE Softwares
Analysis of the Surface Integrity Machined by Short Electric Arc Machining
Dynamic Analysis of Wind Turbine Blade Based on Reverse Engineering
Human Body Tissues Model Reconstruction Based on the Reverse Engineering
Preventive Suggestion and Fault Analysis on Piston Fracture of the Methanol Fresh Air Compressor C102B
Material Removal and Fracture Detection in Micro-EDM Processes
Surface Hardening of Aluminium-Copper Alloy 2011 by RF Plasma Nitriding Process
Synthesis and Structural Consideration of Metal-Organic Framework (MOF) Coordination Polymer with Various Metal Linker Ratios
Fracture Toughness and Fatigue Crack Growth Behavior of Rail Track Material
Variable Amplitude Loading Strains Data Distribution Using Probability Density Function and Power Spectral Density
Critical Stress Intensity Factor Determination for AZ61 Magnesium Alloy
Hydro-Elastic Vibration of Partially Liquid-Filled or Partially Liquid- Surrounded Composite Cylindrical Shells
Theoretical Investigation into the Wave Propagation in Rock with Single Fracture
Strength Analysis for Shrink Fitting System Used for Ceramics Rolls in the Continuous Pickling Line
Stress Intensity Factor of a Central Interface Crack in a Bonded Strip under Arbitrary Material Combination
Identification of Damages and Stress Analysis of Rail/Wheel Rolling Contact Region
Experimental Study on Embryo Skeletal Development to Postnatal Growth Process of Rabbit Thighbone
The Strength Evaluation and Reliability Analysis of Periodic Symmetric Struts Support
Capacity Analysis of Urban Highway Intersections
Failure Behaviour of Semantan Bamboo Strips Loaded in Bending and Shear
Analysis of Thermo-Mechanical Stresses in Laminated Hollow Circular Cylinder with Finite Length
Effects of Different Fillers on Microstructure and Tensile Properties of Welded AA6061-T6
The Study of Underfill Epoxy Hardness in Reducing Curing Process Time for Flip Chip Packaging
Cyclic Behavior of Electrical Resistance Type Low Stiffness, Large Strain Sensor by Using Carbon Nanofiber/Flexible Epoxy Composite
Numerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality Improvements
Experimental and Analytical Studies of Fatigue Crack Growth in Peened after Skimmed Friction Stir Welded Joint of 2024-T351 Al Alloy
Design Optimization of Bi-Tubular Thin Walled Columns for Crashworthiness Application
Effect of Cu Particles Precipitation on Wear Behaviour of Fe-3mass%Cu under Dry Sliding Condition
A Theoretical Study on the Influence of Frequency on the Dynamic Characteristics of Air Film
Fluid-Structure Coupled Analysis Using Enriched Free Mesh Method
Fracture Behavior of Inconel 718 at High Temperature
Corrosion Behavior of Fe-Cr Alloys in Ar-10%O2 Atmosphere
Corrosion Detection in Concrete Structure Including Layered Rebar
Corrosion Prediction under Flow Field
Optimization of Cathodic Protection System Design for Pipe-Lines Structure with Ribbon Sacrificial Anode Using BEM and GA
Stress Distribution Effect on a Stacked-Die QFN Package Manufacturing Processes
Effect of Hook Location for Ultra Fine Pitch Wirebonding Pull Testing Method
Perforated Plate Backing with Coconut Fiber as Sound Absorber for Low and Mid Range Frequencies
Asymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-Law Hardening Materials Joint
Simulation of Compression and Spring-Back Phenomena of Sandwich Structure with Honeycomb Core Subjected to Low Energy and Low Velocity Impact
Mechanical Behaviour of Three Dimensional Lattice Structures
Low Velocity Impact Analyses of Prismatic Columns Using Finite Element Method
Probabilistic Fracture Mechanics Analysis of Multiple Cracks in Cylindrical Pressure Vessel
Prediction of External Stability for Geogrid-Reinforced Segmental Walls
Finite Element Analysis on the Stress Intensity Factor under Combined Bending and Torsion Loading
Development of Green Insulation Boards from Kenaf Fibres Part 2: Characterizations of Thermal and Water Absorption
Fatigue Crack Growth Prediction of Thick Wall Cylinder under Variable Amplitude Loading
Development of Green Insulation Boards from Kenaf Fibres Part 1: Development and Characterization of Mechanical Properties
Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy: Part 2
Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy: Part 1
Experiment Research for Fracture Toughness of PAN-Based Carbon Fibers
Experimental Study of Back Tempering Problem of Laser Hardening
Numerical Study on Self-Consistency Centering Process of Periodic Symmetric Struts Support
Effects of Thermal Aging on Ductile-to-Brittle Transition Temperature Behavior of Welded A516 Steel
Earthquake Damage Assessment to Entire Urban Building
Application of Damage Model in Stability Analysis of ShuangjiangKou Underground Caverns
Effect of Aging and Protective Coating on the Corrosion Behavior of 6061 Al / SiCp Composite in Chloride Solutions
Cracking Safety Evaluation of Massive Concrete Structures
Damage Mechanics Model for Solder/Intermetallics Interface Fracture Process in Solder Joints
