- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
基本説明
Contents: Plastics: Low density polyethylene, Linear low density polyethylene, High density polyethylene, and more.
Full Description
Supported by some of the largest petrochemical and petroleum companies in the world, this unique handbook provides the secrets to the latest in licensed petrochemical technology for some of the most economically important chemicals used throughout the world
Process chemistry and thermodynamics are covered for each major processing unit as applicable.
Contents
Contributors
Preface
Acknowledgments
Part 1: Acetic Acid
Chapter 1.1: Chiyoda Acetic Acid Process ACETICA(R) (Yasuo Hosono)
Part 2: Aniline
Chapter 2.1: DuPont/KBR Aniline Process (Eric W. Wong and Ronald Birkhoff)
Part 3: 1,3-Butadiene
Chapter 3.1: BASF Butadiene Extraction Technology (Robert Brunner)
Chapter 3.2: UOP KLP 1,3-Butadiene from Acetylene Process (Steve Krupa, Tim Foley and Stephen McColl)
Part 4: Cumene
Chapter 4.1: ABB Lummus Global Cumene Production via CDCumene(R) Technology (Stephen Pohl and Sanjeev Ram)
Chapter 4.2: UOP Q-Max(TM) Process (Gary A. Peterson and Robert J. Schmidt)
Part 5: Ethylbenzene
Chapter 5.1: Lummus/UOP Liquid-Phase EBOne Process and CDTECH EB(R) Process (Stephen Pohl and Sanjeev Ram)
Chapter 5.2: Polimeri Europa Ethylbenzene Process (Fabio Assandri and Elena Bencini)
Chapter 5.3: ExxonMobil/Badger Ethylbenzene Technology Brian Maerz and C. Morris Smith)
Part 6: Ethylene
Chapter 6.1: ABB Lummus Global SRT(R) Cracking Technology for the Production of Ethylene (Sanjeev Kapur)
Chapter 6.2: Stone & Webster Ethylene Technology Colin P. Bowen)
Chapter 6.3: KBR SCORE(TM) Ethylene Technology (Steven Borsos and Stephen Ronczy)
Part 7: Methanol
Chapter 7.1: Lurgi MegaMethanol(R) Technology (Alexander Frei)
Part 8: Oxo Alcohols
Chapter 8.1: Johnson Mattey Oxo Alcohols Process (Jane Butcher and Geoff Reynolds)
Part 9: Phenols and Acetone
Chapter 9.1: Polimeri Europa Cumene-Phenol Processes (Maurizio Ghirardini and Maurizio Tampieri)
Chapter 9.2: Sunoco/UOP Phenol Process (Robert J. Schmidt)
Chapter 9.3: KBR Phenol Process (Alan Moore and Ronald Birkhoff)
Chapter 9.4: QBIS(TM) Process for High-Purity Bisphenol A (Ed Fraini, Don West and George Mignin)
Part 10: Propylene and Light Olefins
Chapter 10.1: Lurgi MTP(R) Technology (Waldemar Liebner)
Chapter 10.2: UOP/Hydro MTO Process (Peter R. Pujado and James M. Andersen)
Chapter 10.3: UOP Oleflex(TM) Process (Joseph Gregor and Daniel Wei)
Chapter 10.4: ABB Lummus Global Propylene Production via Olefins Conversion Technology (Catherine A. Berra and James T. C. Wu)
Chapter 10.5: Propylene via CATOFIN(R) Propane Dehydrogenation Technology (V. K. Arora)
Part 11: Styrene
Chapter 11.1: Lummus/UOP "Classic" Styrene Technology and Lummus/UOP SMART(TM) Styrene Technology (Stephen Pohl and Sanjeev Ram)
Chapter 11.2: Stone & Webster (Badger) Styrene Technology (Vincent Welch)
Chapter 11.3: Polimeri Europa Styrene Process Technology (Leonardo Trentini and Armando Galeotti)
Part 12: Terephthalic Acid
Chapter 12.1: EPTA: The Lurgi/Eastman/SK Process (Frank Castillo-Welter)
Part 13: Xylenes
Chapter 13.1: ExxonMobil PxMaxSM p-Xylene Toluene (Terry W. Bradley)
Chapter 13.2: ExxonMobil XyMaxSM Xylene Isomerization (Terry W. Bradley)
Chapter 13.3: UOP Parex(TM) Process for p-Xylene Production (Scott E. Commissaris)
Part 14: Polyethylene
Chapter 14.1: Basell Spherilene Technology for LLDPE and HDPE Production (Maurizio Dorini and Gijs ten Berge)
Chapter 14.2: Borstar LLDPE and HDPE Technology (Tarja Korvenoja, Henrik Andtsjo, Klaus Nyfors, and Gunnar Berggren)
Chapter 14.3: Chevron Philips Slurry-Loop-Reactor Process for Polymerizing Linear Polyethylene (Mike Smith)
Chapter 14.3: ExxonMobil High-Pressure Process Technology for LDPE (Charles E. Schuster)
Chapter 14.5: Polimeri Europa Polyethylene High-Pressure Technologies (Mauro Mirra)
Chapter 14.6: Basell Hostalen Technology for Bimodal HDPE Production (Dr. Reinhard Kuehl and Gijs ten Berge)
Chapter 14.7: Basell Lupotech G Technology for HDPE and MDPE Production (Cyrus Ahmadzade and Gijs ten Berge)
Chapter 14.8: Basell Lupotech T Technology for LDPE and EVA-Copolymer Production (Andre-Armand Finette and Gijs ten Berge)
Chapter 14.9: UNIPOL(TM) PE Gas-Phase Process: Delivering Value to the PE Industry (Mardee McCown Kaus)
Chapter 14.10: NOVA Chemicals SCLAIRTECH(TM) LLDPE/HDPE Swing Technology (Keith Wiseman)
Part 15: Polyethylene Terephthalate
Chapter 15.1: UOP Sinco Solid-State Polymerization Process for the Production of PET Resin and Technical Fibers (Stephen M. Metro and James F. McGehee)
Part 16: Polypropylene
Chapter 16.1: Basell Spheripol Technology for PP Production (Maurizio Dorini and Gijs ten Berge)
Chapter 16.2: Basell Spherizone Technology for PP Production (Riccardo Rinaldi and Gijs ten Berge)
Chapter 16.3: Borstar Polypropylene Technology (Jouni Kivela, Helge Grande, and Tarja Korvenoja)
Chapter 16.4: UNIPOL(TM) Polypropylene Process Technology (Barry R. Engle)
Chapter 16.5: Chisso Gas-Phase Polypropylene Process (Takeshi Shiraishi)
Part 17: Polystyrene
Chapter 17.1: BP/Lummus Technology for the Production of Expandable Polystyrene (Robert Stepanian)
Chapter 17.2: BP/Lummus Technology for the Production of General-Purpose and High-Impact Polystyrenes (Robert Stepanian)
Chapter 17.3: Polimeri Europa General-Purpose Polystyrene Process Technology (Francesco Pasquali and Riccardo Inglese)
Chapter 17.4: Polimeri Europa Expandable Polystyrene Process Technology (Dario Ghidoni and Riccardo Inglese)
Chapter 17.5: Polimeri Europa High-Impact Polystyrene Process Technology (Francesco Pasquali and Franco Balestri)
Part 18: Vinyl Chloride and Polyvinyl Chloride
Chapter 18.1: Vinnolit Vinyl Chloride and Suspension Polyvinyl Chloride Technologies (Ulrich Woike and Peter Kammerhofer)
Chapter 18.2: Chisso Polyvinyl Chloride Suspension Process Technology and Vinyl Chloride Monomer Removal Technology (Seiichi Uchide)
INDEX
