Description
A systems approach to engineering measurements, now in its Eighth Edition
Theory and Design for Mechanical Measurements provides a systematic framework for designing measurement systems and test plans that achieve accurate results. This edition addresses the rapid integration of data-acquisition technologies and numerical-based intelligence strategies into modern measurement practice, while maintaining rigorous treatment of statistics and uncertainty analysis throughout.
New to this edition is coverage of Python programming and numerical approaches to solving differential equations, alongside updated standards and standard test procedures. The text features 20% new end-of-chapter problems, case studies, and vignettes demonstrating real-world techniques. A companion website provides a solutions manual, practice problems, image files, and supporting data files.
Readers will also find:
- Device selection guidance and measurement system performance criteria organized to support flexible undergraduate course structures across engineering disciplines
- Coverage of current data-acquisition and imaging technologies that reflect the shift from stand-alone instrumentation to integrated digital systems
- Treatment of virtual instrument algorithms replacing physical hardware, preparing practitioners for AI-driven measurement and feedback control workflows
- Result reporting and analysis protocols aligned with ASME standards, reinforcing professional engineering practice and regulatory compliance expectations
- A pedagogical framework adaptable to mechanical, biosystems, automotive, and bioengineering curricula at undergraduate and graduate levels
Designed for undergraduate and graduate students in mechanical, biosystems, automotive, and bioengineering programs, this text also serves professional engineers seeking a reliable reference. Widely adopted at universities, the book has helped thousands of students connect foundational measurement theory with contemporary practice.
Table of Contents
PREFACE V
1 BASIC CONCEPTS OF MEASUREMENT METHODS 1
1.1 Introduction, 1
1.2 General Measurement System, 2 Sensor and Transducer, 2 Signal-Conditioning Stage, 3
Output Stage, 4
General Template for a Measurement System, 4
1.3 Experimental Test Plan, 5
Variables, 6
Noise and Interference, 8 Randomization, 9
Replication and Repetition, 13 Concomitant Methods, 14
1.4 Calibration, 14
Dynamic Calibration, 14
Static Sensitivity, 15 Range and Span, 15 Resolution, 16 Accuracy and Error, 16
Random and Systematic Errors and Uncertainty, 16 Sequential Test, 19
Hysteresis, 19
Random Test, 19
Linearity Error, 19
Sensitivity and Zero Errors, 21 Instrument Repeatability, 21
Reproducibility, 21
Instrument Precision, 21
Overall Instrument Error and Instrument Uncertainty, 22 Verification and Validation, 22
1.5 Standards, 22
Primary Unit Standards, 22
Base Dimensions and Their Units, 23 Derived Units, 25
Hierarchy of Standards, 28 Test Standards and Codes, 29
1.6 Presenting Data, 30
Rectangular Coordinate Format, 30
Semilog Coordinate Format, 30 Full-Log Coordinate Format, 30 Significant Digits, 30
Summary, 33
Nomenclature, 34
References, 34
2 STATIC AND DYNAMIC CHARACTERISTICS OF SIGNALS 35
2.1 Introduction, 35
2.2 Input/Output Signal Concepts, 35
Generalized Behavior, 36 Classification of Waveforms, 36 Signal Waveforms, 38
2.3 Signal Analysis, 39
Signal Root-Mean-Square Value, 40 Discrete Time or Digital Signals, 40 Direct Current Offset, 41
2.4 Signal Amplitude and Frequency, 42
Periodic Signals, 43
Frequency Analysis, 45
Fourier Series and Coefficients, 48 Fourier Coefficients, 48
Special Case: Functions with T = 2π, 49
Even and Odd Functions, 49
2.5 Fourier Transform and the Frequency Spectrum, 55 Discrete Fourier Transform, 56
Analysis of Signals in Frequency Space, 60 Summary, 62
References, 63
Suggested Reading, 63
Nomenclature, 63
3 MEASUREMENT SYSTEM BEHAVIOR 64
3.1 Introduction, 64
3.2 General Model for a Measurement System, 64 Dynamic Measurements, 65
Measurement System Model, 66
3.3 Special Cases of the General System Model, 68 Zero-Order Systems, 68
First-Order Systems, 69
Second-Order Systems, 79
3.4 Transfer Functions, 88
3.5 Phase Linearity, 90
3.6 Multiple-Function Inputs, 91
3.7 Coupled Systems, 93
3.8 Numerical Methods for Solving Ordinary Differential Equations
3.9 Summary, 95
References, 95
Nomenclature, 96
Subscripts, 96
4 PROBABILITY AND STATISTICS 97
4.1 Introduction, 97
4.2 Statistical Measurement Theory, 98 Probability Density Functions, 98
4.3 Describing the Behavior of a Population, 103
4.4 Statistics of Finite-Sized Data Sets, 107 Standard Deviation of the Means, 110 Repeated Tests and Pooled Data, 113
4.5 Hypothesis Testing, 114
4.6 Chi-Squared Distribution, 117
Precision Interval in a Sample Variance, 118 Goodness-of-Fit Test, 119
4.7 Regression Analysis, 121
Least-Squares Regression Analysis, 121 Linear Polynomials, 124
4.8 Data Outlier Detection, 126
4.9 Number of Measurements Required, 127
4.10 Monte Carlo Simulations, 129
Summary, 131
References, 132
Nomenclature, 132
5 UNCERTAINTY ANALYSIS 133
5.1 Introduction, 133
5.2 Measurement Errors, 134
5.3 Design-Stage Uncertainty Analysis, 136 Combining Elemental Errors: RSS Method, 137 Design-Stage Uncertainty, 137
5.4 Identifying Error Sources, 140
Calibration Errors, 141
Data-Acquisition Errors, 141
Data-Reduction Errors, 142
5.5 Systematic and Random Errors and Standard Uncertainties, 142 Systematic Error, 142
Random Error, 143
Other Ways Used to Classify Error and Uncertainty, 144
5.6 Uncertainty Analysis: Multi-Variable Error Propagation, 144 Propagation of Error, 145
Approximating a Sensitivity Index, 146 Sequential Perturbation, 149
Monte Carlo Method, 151
5.7 Advanced-Stage Uncertainty Analysis, 151
Zero-Order Uncertainty, 152
Higher-Order Uncertainty, 152
Nth-Order Uncertainty, 152
5.8 Multiple-Measurement Uncertainty Analysis, 157 Propagation of Elemental Errors, 157 Propagation of Uncertainty to a Result, 163
5.9 Correction for Correlated Errors, 168
5.10 Nonsymmetrical Systematic Uncertainty Interval, 170
Summary, 172
References, 172
Nomenclature, 172
6 ANALOG ELECTRICAL DEVICES AND MEASUREMENTS 174
6.1 Introduction, 174
6.2 Analog Devices: Current Measurements, 174
Direct Current, 174
Alternating Current, 178
6.3 Analog Devices: Voltage Measurements, 179 Analog Voltage Meters, 179
Oscilloscope, 179
Potentiometer, 181
6.4 Analog Devices: Resistance Measurements, 182
Ohmmeter Circuits, 182
Bridge Circuits, 182
Null Method, 184
Deflection Method, 185
6.5 Loading Errors and Impedance Matching, 188 Loading Errors for Voltage-Dividing Circuit, 189 Interstage Loading Errors, 190
6.6 Analog Signal Conditioning: Amplifiers, 193
6.7 Analog Signal Conditioning: Special-Purpose Circuits, 196 Analog Voltage Comparator, 196
Sample-and-Hold Circuit, 197
Charge Amplifier, 197
4–20 mA Current Loop, 199 Multivibrator and Flip-Flop Circuits, 199
6.8 Analog Signal Conditioning: Filters, 201 Butterworth Filter Design, 202
Improved Butterworth Filter Designs, 203 Bessel Filter Design, 208
Active Filters, 209
6.9 Grounds, Shielding, and Connecting Wires, 211 Ground and Ground Loops, 211
Shields, 212
Connecting Wires, 213
Summary, 213
References, 214
Nomenclature, 214
7 SAMPLING, DIGITAL DEVICES, AND DATA ACQUISITION 215
7.1 Introduction, 215
7.2 Sampling Concepts, 216
Sample Rate, 216
Alias Frequencies, 218
Amplitude Ambiguity, 221
Leakage, 221
Waveform Fidelity, 223
7.3 Digital Devices: Bits and Words, 223
7.4 Transmitting Digital Numbers: High and Low Signals, 226
7.5 Voltage Measurements, 227
Digital-to-Analog Converter, 227
Analog-to-Digital Converter, 228 Successive Approximation Converters, 232
7.6 Data Acquisition Systems, 237
7.7 Data Acquisition System Components, 238
Analog Signal Conditioning: Filters and Amplification, 238 Components for Acquiring Data, 241
7.8 Analog Input–Output Communication, 242 Data Acquisition Modules, 242
7.9 Digital Input–Output Communication, 246
Data Transmission, 247 Universal Serial Bus, 248 Bluetooth Communications, 248
Other Serial Communications: RS-232C, 249 Parallel Communications, 249
Summary, 256
References, 256
Nomenclature, 256
8 TEMPERATURE MEASUREMENTS 258 0
8.1 Introduction, 258
Historical Background, 258
8.2 Temperature Standards and Definition, 259
Fixed Point Temperatures and Interpolation, 259 Temperature Scales and Standards, 260
8.3 Thermometry Based on Thermal Expansion, 261 Liquid-in-Glass Thermometers, 262
Bimetallic Thermometers, 262
8.4 Electrical Resistance Thermometry, 263 Resistance Temperature Devices, 264 Thermistors, 271
8.5 Thermoelectric Temperature Measurement, 276
Seebeck Effect, 276
Peltier Effect, 277
Thomson Effect, 277
Fundamental Thermocouple Laws, 278
Basic Temperature Measurement with Thermocouples, 279 Thermocouple Standards, 280
Thermocouple Voltage Measurement, 287 Multiple-Junction Thermocouple Circuits, 289
Applications for Thermoelectric Temperature Measurement: Heat Flux, 291
Data Acquisition Considerations, 294
8.6 Radiative Temperature Measurements, 297
Radiation Fundamentals, 297
Radiation Detectors, 299
Radiometer, 299
Pyrometry, 300
Optical Fiber Thermometers, 301
Narrow-Band Infrared Temperature Measurement, 302 Fundamental Principles, 302
Two-Color Thermometry, 303 Full-Field IR Imaging, 303
8.7 Physical Errors in Temperature Measurement, 304 Insertion Errors, 305
Conduction Errors, 306
Radiation Errors, 308
Radiation Shielding, 310
Recovery Errors in Temperature Measurement, 311 Summary, 313
References, 313
Suggested Reading, 313
Nomenclature, 314
9 PRESSURE AND VELOCITY MEASUREMENTS 315
9.1 Introduction, 315
9.2 Pressure Concepts, 315
9.3 Pressure Reference Instruments, 318
McLeod Gauge, 318
Barometer, 319
Manometer, 320
Deadweight Testers, 324
9.4 Pressure Transducers, 325
Bourdon Tube, 326
Bellows and Capsule Elements, 326 Diaphragms, 327
Piezoelectric Crystal Elements, 330
9.5 Pressure Transducer Calibration, 331
Static Calibration, 331
Dynamic Calibration, 331
9.6 Pressure Measurements in Moving Fluids, 333 Total Pressure Measurement, 334
Static Pressure Measurement, 335
9.7 Modeling Pressure–Fluid Systems, 336
9.8 Design and Installation: Transmission Effects, 337 Liquids, 338
Gases, 339
Heavily Damped Systems, 340
9.9 Acoustical Measurements, 341
Signal Weighting, 341
Microphones, 342
9.10 Fluid Velocity Measuring Systems, 345 Pitot–Static Pressure Probe, 346 Thermal Anemometry, 348
Doppler Anemometry, 350 Particle Image Velocimetry, 352
Selection of Velocity Measuring Methods, 353
Summary, 354
References, 354
Nomenclature, 355
10 FLOW MEASUREMENTS 357
10.1 Introduction, 357
10.2 Historical Background, 357
10.3 Flow Rate Concepts, 358
10.4 Volume Flow Rate through Velocity Determination, 359
10.5 Pressure Differential Meters, 361
Obstruction Meters, 361
Orifice Meter, 364
Venturi Meter, 366
Flow Nozzles, 368
Sonic Nozzles, 373
Obstruction Meter Selection, 374 Laminar Flow Elements, 376
10.6 Insertion Volume Flow Meters, 377 Electromagnetic Flow Meters, 377 Vortex Shedding Meters, 379 Rotameters, 381
Turbine Meters, 382
Transit Time and Doppler (Ultrasonic) Flow Meters, 383 Positive Displacement Meters, 384
10.7 Mass Flow Meters, 386 Thermal Flow Meter, 386 Coriolis Flow Meter, 387
10.8 Flow Meter Calibration and Standards, 391
10.9 Estimating Standard Flow Rate, 392
Summary, 393
References, 393
Nomenclature, 393
11 STRAIN MEASUREMENT 395
11.1 Introduction, 395
11.2 Stress and Strain, 395
Lateral Strains, 397
11.3 Resistance Strain Gauges, 398
Metallic Gauges, 398
Strain Gauge Construction and Bonding, 400 Semiconductor Strain Gauges, 403
11.4 Strain Gauge Electrical Circuits, 404
11.5 Practical Considerations for Strain Measurement, 407 The Multiple Gauge Bridge, 407
Bridge Constant, 408
11.6 Apparent Strain and Temperature Compensation, 409 Temperature Compensation, 410
Bridge Static Sensiivity, 412 Practical Considerations, 413 Analysis of Strain Gauge Data, 413
Signal Conditioning, 416
11.7 Non-contact Strain Measuring Techniques, 418 Basic Characteristics of Light, 418 Photoelastic Measurement, 419
Moiré Methods, 421
Fiber Bragg Strain Measurement, 422 Summary, 424
References, 424
Nomenclature, 424
12 MECHATRONICS: SENSORS, ACTUATORS, AND CONTROLS 426
12.1 Introduction, 426
12.2 Sensors, 426
Displacement Sensors, 426
Measurement of Acceleration and Vibration, 430 Velocity Measurements, 437
Angular Velocity Measurements, 441 Force Measurement, 444
Torque Measurements, 447 Mechanical Power Measurements, 448
12.3 Actuators, 450
Linear Actuators, 450
Pneumatic and Hydraulic Actuators, 452 Rotary Actuators, 455
Flow-Control Valves, 455
12.4 Controls, 457
Dynamic Response, 460
Laplace Transforms, 460
Block Diagrams, 463
Model for Oven Control, 464 Proportional–Integral (PI) Control, 468
Proportional–Integral–Derivative Control of a Second-Order System, 469
Summary, 474
References, 474
Nomenclature, 474
A PROPERTY DATA AND CONVERSION FACTORS 475
B LAPLACE TRANSFORM BASICS 482
B.1 Final Value Theorem, 483
B.2 Laplace Transform Pairs, 483 Reference, 483
GLOSSARY 484
INDEX 000
-
- 洋書電子書籍
- Building Websites A…
-
- 洋書電子書籍
- Natural Polymer-Bas…



