- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Collection of selected, peer reviewed papers from the Ninth International Latin American Conference on Powder Technology (PTECH 2013), October 27 - 29, 2013, São Paulo, Brazil.
The 114 papers are grouped as follows:
Chapter 1: Synthesis;
Chapter 2: Processing;
Chapter 3: Properties;
Chapter 4: Applocations
Contents
Foreword, Organization and Sponsors, Chapter's Editors and Scientific Reviewers
Chapter 1: Synthesis
Structural Evolution of Ti-Fe-Si-B Alloys Produced by High-Energy Ball Milling and Sintering
Phase Transformation in Mechanically Alloyed and Hot-Pressed Ti-2Nb-22Si-11B and Ti-6Nb-22Si-11B Powder Mixtures
Phase Transformation in Mechanically Alloyed and Hot-Pressed Nb-4Si-8B and Nb-8Si-16B Alloys
High-Energy Ball Milling and Sintering of Ti-2Ta-22Si-11B and Ti-6Ta-22Si-11B Powders Mixtures
Effect of Mechanical Alloying on Characteristic of Powders of Amnoia Hepatamolybdate, Copper and MoCu Sintered
High-Energy Ball Milling and Hot Pressing of the Ni-48Ti-2Sn and Ni-45Ti-5Sn Powder Mixtures
Obtainment of a NiCrNbC Alloy by Mechanical Alloying
Comparative Study of Mechanical Activation Improved by High Energy Ball Mills in Chromium Oxide Reduction
Syntesis of Niobium Nitride Using Cryogenic Milling
Microstructural Characterization of 66%Co-28%Cr-6%Mo Dental Alloy Powder Obtained by High-Energy Ball Milling
Effect of Ball-Powder Ratio in the High-Energy Milling of 66%Co-28%Cr-6%Mo Dental Alloy
Synthesis of TiFe Compound from Ball Milled TiH2 and Fe Powders Mixtures
Sintering of Al4C3 Using Aluminum Scrap and Commercial Graphite
Study of Electrical, Mechanical and Microstructural Properties of Composites Based on Cu-Ni-Ag-Al2O3 Obtained by Powder Metallurgy
Electrical, Mechanical and Microstructural Properties of Copper-Chromium-Silver-Alumina Composites Obtained by Powder Metallurgy
Processing of Metal Matrix AA2124 Aluminium Alloy Composites Reinforced by Alumina and Silicon Carbide by Powder Metallurgy Techniques
Dispersion of Carbon Nanotubes in AA6061 Aluminium Alloy Powder by the High Energy Ball Milling Process
Development of Fe-P Matrix Composites Containing Embedded Solid Lubricants
Preparation of Molybdenum High Speed Tool Steels with Addition of Niobium Carbide by Powder Metallurgy Techniques
Features of the Processing of AA2124 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Nitride Prepared by Powder Metallurgy Techniques
A New Sintered Hard Metal Composite
Characterization of Composites Based on 316 Stainless Steel and Zirconia for Use as Functionally Graded Materials
Nanostructured Al Powder Obtained by High Energy Ball Milling at Ambient and Cryogenic Temperatures
Effect of Sintering Temperature on the Formation of Intermetallics in Al-Fe-B Nanocomposite
Synthesis and Characterization of Silver Nanoparticles
Fourier Transform Infrared Spectroscopic Study of Boron-Doped Micro/Nano/Ultrananocrystalline Diamond Prepared by Chemical Vapor Deposition
Nanocrystalline Diamond Films Prepared with Different Diamond Seeding Processes of 4 Nm and 0.25 Μm Diamond Powders
Boron-Doped Ultra/Nanocrystalline Diamond Films Obtained with Different Growth Times and Boron Doping Levels
Investigation of Boron Doped Nanocrystalline Diamond Films Grown on Porous Silicon Substrate under Different Doping Concentrations
Experimental Analysis of Behavior in TiO2 Nanoparticle Suspension
Micro, Nano and Ultranano-Crystalline Diamond Deposition
Evaluation of the Deposition of Nanoparticles in Fibrous Filter
Characterization of Nitrogen Doped Diamond Electrodes Produced by Hot Filament Chemical Vapor Deposition
Electric Double Layer Capacitor of Multiwall Carbon Nanotubes under Different Degree of Acid Oxidations
Vertically Aligned Carbon Nanotubes/Carbon Fiber Composites for Electrochemical Applications
Project and Construction of a Differential Mobility Analyzer to Produce Monosized Nanoparticles
A CFD Study of the Air Distribution at Non-Conventional Dryers Using Different Configurations of Mini Pipes
Analysis of Solid Concentration Profiles in Batch Sedimentation Tests Using Viscous Newtonian Fluids
An Investigation of the Different Flow Regimes in a Rotating Drum through Experimental and Simulation
Evaluation of Self Cleaning System in Aerosol Filtration Using Synthetic Filter
CFD Applied to the Analysis of Hydrodynamics in a Hydrocyclone
Obtaining Ceramic Filter from Rice Husk and Kaolinitic Clay
Fast Pyrolysis of Soy Hulls in a Fluidized Bed Reactor: Main Components of the Bio-Oil
Analysis of the Effect of the Underflow Orifice Size on the Filtering and Concentrating Hydrocyclone
Study of the Capacity in a Totally Permeable Hydrocyclone
Experimental Study of the Hydrocyclone H11 with Rotational Feed
Physical Properties of Cuttings, Drilling Fluid and Organic Phase Recovered in the Drying Operation in Oil and Gas Well Drilling
Study of the Use of an Anionic Collector in the Mineral Wastewater Treatment by Dissolved Air Flotation
Obtaining Constitutive Equations for Thickening and Filtration Non-Newtonian Fluids
Analysis of the Compressibility of Sediments in Batch Settling Tests Using Newtonian and Non-Newtonian Fluids
Synthesis and Characterization of Barium Titanate by Solid-State Reaction
Dry Aggregate Particle Size Distribution Optimization for Soderberg Anode Paste Production Applied to Aluminum Industry
Analysis of the Collection Efficiency of Fiber Filters on the Filtration of Nano-Sized Particles from Aerosol
Behaviour of Fluids in Porous Materials
Chapter 2: Processing
Fe-hBN Composites Produced by Double Pressing and Double Sintering
Densification Behaviour Modelling for Metallic Powders
Production of Ti-10V-2Fe-3Al for Aerospace Application from Ti-Al Pre-Alloyed Powder
Characterization of Commercial Co-Cr-Alloy Powder Used in Selective Laser Sintering
Influence of the Temperature in the Direct Forming Laser Process of 316L Stainless Steel with CO2 Laser
Selective Laser Sintering of Different Powders of Co-Cr-Mo
Atomization and Selective Laser Melting of a Cu-Al-Ni-Mn Shape Memory Alloy
Performance Thermally Sprayed Coatings Tests when Subject to Adhesive Wear
Plasma Sintering-Carburizing of 410 LHC Steel in Carbon Containing Atmosphere
Characterization of the AISI 304 Alloy Treated in a Large Vacuum Chamber PIII System with a New HV Pulser
Chapter 3: Properties
Evaluation of Heat Absorption in Iron Ore Using Microwave Energy Source
Mechanical Characterization of a Steel AISI 43100 Submitted to Different Routes of Heat Treatments
Thermal Treatment and Improvement of Tribologycal Properties of Automotive Ring by Laser Methods
Influence of Temperature on Ductile-Fragile Behavior
Adherence Analysis of DLC Films Grown on AISI M2 Steel Substrates as a Function of Silicon Interlayer Thickness
Friction and Wear Behavior Evaluation of DLC Films Grown in Multilayer of Carbon and Silicon
Study of Cooling Rate Influence on SAF 2205 Duplex Stainless Steel Solution Annealed
Study of Sintering of Iron Powder Bars Processed by Equal Channel Angular Pressing
Interface Evaluation of MCrAlY Powder Bond Coat on 316 SS Processed with Laser Irradiation
Sintering Studies and Microstructural Evolution of Fe-MoS2 Mixtures
Microstructure and Electrochemical Characteristics of LaPrMgAlMnCoNi Hydrogen Storage Alloys for Nickel-Metal Hydride Batteries
Self-Discharge and Microstructure of Supercapacitors Tested at Room Temperature and at 333 K
Effects of Sodium Nitrite, Sodium Dichromate and Benzoic Acid as Inhibitors in the Protection of Mild Steel in Water
A Comparative Study of Biomimetic Coatings on Titanium and Stainless Steel
Analysis of Surface and Profile of Pits in Austenitic Stainless Steel AISI 310S by Optical Microscopy
Effect of Plasma Nitriding on Creep Behavior at 550 oC of a Maraging Steel (300 Grade) Solution Annealed
Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti-13Nb-13Zr Alloy Produced by Powder Metallurgy
Comparation between Laser Surface Nitriding and Nitrogen Plasma Immersion Ion Implantation (N-PIII) on Creep Behavior of Ti-6Al-4V Alloy
Spark Plasma Sintering and Hot Compression Analysis of Pure Mg and AZ91 Alloy
Comparative Study of Creep Resistance of a Ti-6Al-4V Alloy with Metallic and Ceramic Coatings
Effects of Hydrogen Content in Nitrogen-Based Sintering Atmosphere on Microstructure and Mechanical Properties of Fe-0.3%C-0.1%B Alloy
Influence of High Temperature Sintering on Impact Properties of Low Alloyed Steels
Chapter 4: Applocations
Preparing Magnetocaloric LaFeSi Uniform Microstructures by Spark Plasma Sintering
Characterization of Porous Ti-35Nb Alloy Sintered at Different Temperatures for Implant Applications
Quantitative Analysis of Titanium Samples by Means of the Pore-Throat Network Code Application
Chemical, Structural and Mechanical Study of Metallic Biomaterials Used in Hip Arthroplasty
Characterization of Titanium Powders Processed at Different Temperatures
Microstructural Characterization of a High Copper (Nd0.75Pr0.25)2Fe14B Magnet
Sintered Fe50Ni Alloy Produced by Mixing Iron and Nickel Powders
Effects of Order-Disorder Reactions on the Magnetic Properties of Rapidly Quenched Fe-6.5% Si Alloy
Superparamagnetic Iron Oxide Nanoparticles for Magnetic Hipertermia: Synthesis, Surface Modification by Polyethylene Glycol and Characterization
Grain Growth Kinetics of (NdPr)2Fe14B Magnets
Influence of the Grain Size on the Dysprosium Diffusion in NdFeB Magnets
Frequency Characterization of Ferrite Beads in the Microwave Range for Nonlinear Applications
Relation between Initial Magnetization Curve and Grain Size of Nanocrystalline NdFeB Magnets
Coercivity Mechanism in Hard and Soft Sintered Magnetic Materials
Magnetic Domains Observation from Bitter Patterns of NdFeB Alloy
Feasibility Study for Feedstock Recycling on PIM Nd-Fe-B Permanent Magnets
A Simple Device for Measuring Losses in Soft Magnetic Materials
NdFeB Type Magnets Produced by Spark Plasma Sintering
Thermal Analysis Investigation of NdFeB Bonded Magnets
Upper Limit for the Coercive Force in NdFeB and PrFeB Magnets
Squareness of NdFeB Stoner-Wohlfarth Hysteresis
Modeling the Neodymium Metallic Reduction from Molten Salts
Virtues and Weakness of Brown Micromagnetics
Heat Treatment Design for NdFe and SmCo5 Magnets with Basis on the Phase Diagram
Application of Nanoparticle Tracking Analysis (NTA) in Aqueous Solutions of TiO2
MSW Leachate Inorganic Ion Diffusion through Compacted Soil and HDPE Geomembrane Barrier - Laboratory Experiments and Model Validation
Predictions of Xylene Adsorption on Agglomerated Activated Carbon Pellets in a Fixed Bed Column
Adherence Study of Diamond-Like Carbon Films Deposited on X45 CrSi 9-3 Steel with a Silicon Interlayer
