- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Collection of selected, peer reviewed papers from the 15th International Symposium on Eco-Materials Processing and Design, (ISEPD), January 12-15, 2014, Hanoi, Vietnam.
The 74 papers are grouped as follows:
I. Materials for Environment Preservation, Energy Conservation/Harvesting and New Energy,
II. Materials Cutting and Processing Technologies for Reduction of Environmental Impact,
III. Eco-Processing and Design on Polymer, Ceramics, Metals, Semiconductors,
IV. High Performance Materials Including Nano-Materials for the Environment, and Coating/Corrosion,
V. Hybrid Materials and Composites for ECO Society,
VI. Photocatalysis for a Better Environment and Clean Energy,
VII. Bio-Inspired Materials for a Better Life and Other Novel Bio-Materials,
VIII. Light Metals and Alloys of Mg, Al, Ti, Be, and Porous Materials, IX. Steel and Alloy,
X. Manufacturing and Mechanical Technology
Contents
Preface and Organizing Committee
I. Materials for Environment Preservation, Energy Conservation/Harvesting and New Energy
Characterization of Cast Iron Scrap Chips toward β-FeSi2 Thermoelectric Materials
Two-Step Sintering of Non-Stoichiometric CeO2-x
Adsorption Characteristics of Impregnated Adsorbent for Mercury Removal
Effect of the Alkali-Activation on the Mechanical Property of Geopolymer Composite
Fabrication of FRP Spacers of Insulating Glass for Energy-Saving Eco-Friendly Home
Synthesis of Diglycerol Ester as Insulating Oil for Offshore Wind Turbine Transformer
The Effects of Deposited Material and Loaded Amount within Synthesis of TMP-Ester
Effect of CaO Content on Yb: YAG Disk Laser Weldability of AZ31 Mg Alloy
Fabrication and Electrochemical Performance of Nitrogen-Doped Graphene Synthesized by Hydrothermal Method
Graphene Oxide Based Selective VOCs Sensor for Indoor Air Quality Monitoring
Thermocatalytic Degradation of Low Density Polyethylene Films at Artificial Aging Treatment under Lower Temperature
Low-Temperature Thermocatalytic Degradation of Polyethene Films by Nano-Titanium Dioxide in Water
Study on Aqueous Viscosity Behaviors of Hydroxypropyl Methylcellulose Hydrosol and Konjac Glucomanan Hydrosol
Effect of Lignin and RLDPE Soil Amendments on Water Holding Capacities of Desert
Biosorption of Strontium Ions by Low-Cost Sunflower Stem and Leaf
Preparation and Characterizations of Novel Near Room-Temperature Driven Fe/Sr2Bi2O5 Thermocatalyst
Effects of Ultrafine Grinded Steel Slag Addition on Properties of Cement
Effect of Calcium Compounds on Mechanical Properties of Eco-Friendly Non-Cement Mortar
Enhancement of PEM Fuel Cell Performance by Flow Control
II. Materials Cutting and Processing Technologies for Reduction of Environmental Impact
A Comparative Study on the Physical Properties of Artificial Aggregates Made from Acid Clay and Dredged Soil
Dust Removal Using Electrode-Plates Coated with Activated Carbon
Effects of Nano-Porous Materials and Inert Gas on Sound Proof Properties of Double Layer Acryl Plate
Characteristics of MSWI Ash and its Application to Zeolite Synthesis
III. Eco-Processing and Design on Polymer, Ceramics, Metals, Semiconductors
Characteristics of Pollutants Removal by Carbonized Porous Media Made from Sewage Sludge
Fabrication of Aluminum Superhydrophobic Surface with Facile Chemical Etching Method
Purification and Size Control of AlN Powder for AlN Single Crystal Growth
A Brief Review on TiO2 Coating Deposited by Cold Spraying
Protective Agent Free Eco-Synthesis of Silver Nanowire via Needle-Shaped Silver Acetate Precursor
Synthesis and Characterization of Ag/Graphene Nanocomposites by Solid-Liquid Sonochemical Reactions
Production and Characterization of Recycled SUS 439L Powders by Gas Atomization Process
Study on Recycling of Electric Arc Furnace Dust
Preparation of Drug Loaded Polyurethane Thin Layer on the Silicone Tube by Electrospinning Technique for Stent Application
A Smart System Combining Rainwater and Treated Sewage for Use in Sports Complexes in Korea
Composition and Microstructure of Koryo Celadon in Korea
IV. High Performance Materials Including Nano-Materials for the Environment, and Coating/Corrosion
Density Functional Theory Study of the Interaction of Nitric Oxide with 3D Transition Metal Dimers
Effect of Carbon Pre-Treatment on Pd Dispersion in Synthesis of Pd/C Catalyst
Temperature Dependence of Magnetic Properties in Ferrite Powders by High Energy Ball Milling
Self-Cleaning TiO2/SiO2 Thin Film Prepared by a Simple Sol-Gel Method
Development of a Carbon Nanotube Paste for the High-Performance Field Emitters by Using the Simple Ball-Milling Method
Application of Low Voltage in Quantitative Analysis by Energy Dispersive Spectrum (EDS)
Surface Modification of CaCO3 Micro/Nanofillers by Pimelic Acid: Consequences on Crystallization Behaviors of Polypropylene Composites
Synthesis and Characterization of Cu-TiC Nanocomposites by Ball Milling and Spark Plasma Sintering
V. Hybrid Materials and Composites for ECO Society
Crack-Healing Function of Nano-Ni/(ZrO2+Al2O3) Hybrid Materials
Fabrication and Fracture Characteristics of AlN/Ni Laminated Composites
Preparation and Thermal-Physical Properties of Three Dimensional Bicontinuous SiC/Cu-Si Composite
Study on Electrical and Thermal Properties of Epoxy Resin/Inorganic Filler Composites for the Fully Enclosed Casting Bus Bar and its Calculation of the Temperature Field
Preparation of Titanium Coating on Alumina Foam by Chemical Vapor Deposition
Fabrication and Characterization of Silica Aerogel @Polystyrene Composite Beads by Suspension Polymerization
Research on Preparation Technology for Machinable Ceramics
VI. Photocatalysis for a Better Environment and Clean Energy
The Photocatalytic Degradation of Methomyl over TiO2 Nanopowder Prepared by the Low Temperature Solvothermal Route
Estimation of UV Dose for the Effective Degradation of Pharmaceuticals in Secondary Treated Wastewater
Preparation of Fe/N Co-Doped TiO2 Powders by Mild Hydrothermal Method
Control of Indoor Suspended Microorganisms by UV and Photocatalytic Disinfection
Catalytic Activities of α, β, γ - Bismuth Molybdates for Selective Oxidation of Propylene to Arcrolein
VII. Bio-Inspired Materials for a Better Life and Other Novel Bio-Materials
Antibacterial Properties Evaluation of a Novel Polyurethane-Based Root Canal Sealer
Potential of Tourmaline/Chitosan Fiber for Wound Dressing
Fluoridation and Mechanical Properties of Hydroxyapatite with Addition of TiF3, Al2O3 and Fe2O3 by Sintering
Application of Finite Element Method to the Simulation of Vessel Stents
Influencing Factors on Chest Compression in Moving Ambulance
Eating Speed Controls the Metabolic Syndrome
VIII. Light Metals and Alloys of Mg, Al, Ti, Be, and Porous Materials
Fractal Research of Pore-Structure in Porous Titanium Fibers
Structure and Mechanical Properties of Lotus-Type Porous Copper with a Ti Coating on the Pore Wall by Arc Ion Plating
Fabrication of Porous SiAlON Using Fe2O3 as Pore Former
Thermal Stability of Amorphous Al-Fe-Y Prepared by Mechanical Alloying
IX. Steel and Alloy
The Study on Welding HAZ Microstructure of SAF 2507 Duplex Stainless Steel by Simulation Tests
Phase Transformation Behavior of Niobium Containing Microalloyed Steel with Predeformation and Continuous Cooling
Influence of Top Slag on the Plasticity of CaO-SiO2-Al2O3 Inclusions in 42CrMoA Crankshaft Steel
Study on Microstructure and Fracture Morphology of 2205 Duplex Stainless Steel Resistance Spot Welds
Effect of C Content on the Microstructure and Physical Properties of Fe-36Ni Invar Alloy
Effects of Chromium Content and Impact Load on Microstructures and Properties of High Manganese Steel
X. Manufacturing and Mechanical Technology
Characterization of High Speed Steel Billets Fabricated by Electro-Slag Rapid Remelting Method
Cutting Analysis of 3-Layer Laminated Plate
Finite Element Simulation and Experimental Study on Internal Fracture of Railway Sleeper Screw during Cross Wedge Rolling Process
Simulation Analysis of HPDC Process with Automobile Part by CAE
