- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Collection of selected, peer reviewed papers from the 57th Brazilian Ceramic Conference (CBC57), May 19-22, 2013, Natal/RN, Brazil.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 125 papers are grouped as follows:
Chapter 1: Raw Materials,
Chapter 2: Powder Synthesis,
Chapter 3: Earthenware,
Chapter 4: Whiteware,
Chapter 5: Ceramic Tiles,
Chapter 6: Plaster and Cement,
Chapter 7: Refractories and Thermal Insulation, Chatper 8: Glasses, Glass-ceramics and Related Materials,
Chapter 9: Thermo-Mechanical Ceramics,
Chapter 10: Electrical, Electronic and Magnetic Ceramics,
Chapter 11: Nuclear, Optical and Chemical Ceramics,
Chapter 12: Bioceramics,
Chapter 13: Recycling and Environment,
Chapter 14: Processing,
Chapter 15: Nanotechnology,
Chapter 16: Other
Contents
Foreword, Committees, Sponsors and Supporters
Chapter 1: Raw Materials
Characterization of a Limestone Powder Residue for Recycling as a Concrete Block Incorporation
Comparative Study of Organoclays with Ionic Surfactant
Study of a Clayey Soil Used in the Fabrication of Red Ceramics in Campos Dos Goytacazes, Brazil
Purified Smectite Clays Organofilized with Ionic Surfactant for Use in Oil-Based Drilling Fluids
Improvement of Rheological Properties of Little Noble Varieties from Boa Vista Bentonites - Part I: Experimental Design
Characterization of Natural Slip Materials Geologically Found in the North of the State of Rio de Janeiro, Brazil
Reactive Formations: Characterization and Capacity Expansion
Use of Construction Waste to the Mass Manufacture of Clay Products
Bentonite Clays from Sossego, Paraiba, Brazil: Physical and Mineralogical Characterization
Influence of Hydrocycloning Pressure on the Purification of Bentonite
Chapter 2: Powder Synthesis
Sinthesys of Mullite Using Microwave Furnace from Kaolin and Alumina Residue
Silver-Doped Zirconia Nanoparticles as Possible Bactericide in Water Filters
Influence of Oxidizing Atmosphere on Crystalline Phase Formation and Microstructural Properties of Mixed Cerium-Zinc Oxides Obtained by Polymeric Precursor Method
Experimental Planning of Mixtures to Obtain Geopolymer
Characterization of Al2(WO4)3 Synthesized by Co-Precipitation Method
Low Temperature Phase Transformation Study in the Al2O3-Y2O3-Nb2O5 System
Use Residue of Bagasse Sugar Canein Synthesis of Molecular Sieve MCM-41
Synthesis and Characterization of Molecular Sieve SBA-15 and Catalysts Co/SBA-15 and Ru/Co/SBA-15
Influence of Clay Content and Surfactant on the Rheology of Non Aqueous Drilling Fluids
Synthesis of Nanostructured PZT Ceramics with Powder Obtained from Coprecipitate Method
SBA-15 Molecular Sieve Using Clay as Silicon Sources
Study of Organic Surfactant Sorption in Organophilic Clays
Evaluation of a Sodic Organoclay as Adsorbent for Removing Oil/Water in a Synthetic Wastewater
Influence of the Citric Acid and Metal Cation Ratio on the Structural and Morphological Characteristics of Aluminum Oxide Synthesized by Pechini Method
Effect of Calcination Temperature in the Aluminum Oxide Synthesized by Pechini Method in the Citric Acid: Metal Cation Ratio of 2:1
Polycrystalline Tetragonal Zirconia of the Form ZrO2: 3 mol% Re2O3(Re-TZP) for Use in Oxygen Sensors: Synthesis, Characterization and Ionic Conductivity
Sintering Sr2MgWO6 Ceramic and their Reactivity to Petroleum
Microstructural and Colour Analysis of CuCrO2 Delafossite Obtained by Gelatin Method
Synthesis, Characterization and Ionic Conductivity of Fully Stabilized Zirconia Obtained from Core-Shell Type Structures
Synthesis and Characterization of Zirconium Oxide Systems with Yttrium Rich Rare Earth Concentrate Additives
Synthesis of Gadolinium Doped Ceria Ceramic Powder by Polymeric Precursor Method (Pechini)
Preparation of Mullite Whiskers from Powder of Topaz Pure and Doped with Rare Earths
Effect of LiF and CaO Additions on MgAl2O4 Dynamic Behavior
Effects of the Addition of Ions Barium on the Structural and Electrical Properties of PZT Ceramic
Nanostructured Co3O4 Oxide for Low Temperature Ethanol Oxidation
Effect of the Iron Doping on the Thermal Decomposition of the Polymeric Precursor for the Titanium Dioxide Powder Synthesis
Chapter 3: Earthenware
Microstructural Analysis of Clay Ceramic Added with Argillite and Grog
Study on the Viability of Using Drill Cuttings from the Potiguar Basin in the Production of Ceramic Products: Influence of Concentration and Firing Temperature
Effect of Banana Fiber in the Properties of Clayey Ceramic
Addition of Grog-Clay Ceramic Waste in Multiple Use Mortar
The Incorporation of the Ceramic Industry Firewood Ash into Clayey Ceramic
Banana Aqueous Extract as a Potential Addition to Clay Ceramics
Microstuctural Evaluation of a Clay Ceramic Incorporated with Granite Rejects from Stone Sawing Using Diamond Wire
Degradation of Red Ceramic with Incorporated of Petroleum Waste
Red Ceramic with Addition of Petroleum Coke
Resistance to Synthetic Seawater Aggression of Clay Ceramics Incorporated with an Ornamental Stone Residue
Study of Ceramic Block Manufacture with the Addition of Waste from Iron Ore Extraction
The Influence of Sintering Temperature on Ceramic Material with Addition of Mill Scale
Chapter 4: Ceramic Tiles
Total and Partial Replacement of Quartz in Aluminum Hydroxides Porcelain Formulations
Study of the Effect of Feldspar Replacement from a Mixture of Glass / Syenite in Technological Properties of Ceramic Coatings
Characterization of Ceramic Composite Waste of Granite, Marble and Caulim for Production of Coating Plates
Analysis of Color of the Ceramic Coatings Submitted to Different Processing Conditions
Ceramic Tiles with Photovoltaic Properties
Reuse of Waste from Polish in the Production of Porcelain
Phases Obtained from Heat Treatment of Mn-Co-Based Coatings Deposited by Dip Coating
Formation of Spinel from Fe-Ni Coating Electrodeposited on AISI 430 Ferritic Stainless Steel
Morphology and Fluidity of Spray-Dried Powder Transported by Compressed Air
Chapter 5: Plaster and Cement
Processing and Properties of Soil-Cement Blocks Incorporated with Natural Grit
Technical Feasibility of Using Lightweight Concrete with Expanded Polystyrene in Civil Construction
Chapter 6: Refractories and Thermal Insulation
Characterization and Granulometric Correction Soil for the Production of Soil-Cement Blocks for Two Method, Particle Size and X-Ray Florescence to be Inserted in Phase Change Materials (PCMS)
Chatper 7: Glasses, Glass-Ceramics and Related Materials
Evaluation of Pozzolanic Activity of Siliceous Materials Using the Method of Variation of Conductivity in Lime Solution
Properties of Glass-Ceramics Obtained from Crystallization of the SiO2-Al2O3-MgO-Li2O System with Addition of ZrO2
Study of Bubbles Elimination in Silica Glass Produced by Flame Fusion from Brazilian Natural Quartz Powder
Chapter 8: Structural Ceramic
Development and Characterization of the Al2O3-YAG Ceramic Composites
Chapter 9: Electrical, Electronic and Magnetic Ceramics
Preparation of Porous Zirconia-Yttria Ceramics by Thermal Removal of Potassium Iodide
Synthesis by Combustion Reaction of the System Zn0,6Fe0,4O for Application as DMS: Avaliation of the Type of Container
Magnetic Study of Nanoferritas CoFe2O4 Obtained by Reaction of Combustion
Characterization of Yttrium-Doped Barium Zirconate Nanocrystalline Powder Prepared by Spray Pyrolysis
Microstructure and Electrical Conductivity of Yttria-Stabilized Zirconia with Lithium Addition
Calcination Temperature Influence on Ionic Conductivity of Solid Electrolytes
Morphological Characterization by SEM, TEM and AFM of Nanoparticles and Functional Nanocomposites Based on Natural Rubber Filled with Oxide Nanopowders
Chapter 10: Nuclear, Optical and Chemical Ceramics
Application of Design of Experiments to the Alkaline Treatment in Mordenite Zeolite: Influence on Si/Al Ratio
Chapter 11: Bioceramics
Synthesis and Characterization of Hydrated Calcium Phosphate: Precursors for Obtaining Biocements
Synthesis and Characterization of Calcium Phosphate from Fossilized Calcareous Shells for Biomedical Applications
Mechanical Characterization of Tricalcium Phosphate Ceramics Doped with Magnesium
Preparation and Characterization of Hybrid Fe3O4/APTES for Immobilization of GOX
Effect of the Mg2+ Substitution on the Sintering Behavior and Compressive Strength of Doped Β-TCP/CPP Ceramics
Titanium Substrate Surfaces Coated with Hydroxyapatite by Magnetron Sputtering
Chapter 12: Recycling and Environment
A Study on Public Opinion of Structural Concrete Blocks Incorporated with Ornamental Stone Residue
Incorporation of Global Blast Furnace Sludge into Clayey Ceramic
Coarse Aggregates Obtained from Red Mud via Pelletizing Process
Incorporation of Fired Ceramic Waste into Binary and Ternary Earth-Binder (S) Mixtures for Compressed Blocks
Evaluation of Industrial Rejects of Mineral and Metallurgical Processing as Ceramic Synthetic Proppants
Properties of Clay Ceramic Incorporated with Red Mud
Characterization of a Red Mud and a Clay Body for Ceramic Fabrication
Modification of Sodium Bentonitic Clay Used in Zinc Ion Adsorption
Influence of Firing Temperature on the Behavior of Clay Ceramics Incorporated with Elephant Grass Ash
Evaluation of Co and CO2 Emitted in the Firing of Clay Ceramics Incorporated with Elephant Grass Ash
Use of Ceramic Membrane for Indigo Separation in Effluent from Textile Industry
Study of the Influence of Granite Residue in Different Compositions to Prepare Ceramic Membranes
Environmental Durability of Soil-Cement Block Incorporated with Ornamental Stone Waste
Study of Mechanical Properties and Development of Concrete Using Sludge from Textile Industry
Characterization of Spectrogel Organoclay Used to Adsorption of Petroleum Derivatives
Evaluation of Agents Abrasives Polishing Porcelain Employing Image Processing
Evaluation of the Reuse of Waste from the Polish Porcelain in the Development of Ceramic Products with Better Thermal Comfort
Influence of Waste Glass on the Physical Properties of Portland Cement Concrete
Study and Characterization of Chocolate B Clay on Adsorption of Heavy Metals (Lead and Zinc) in Bath Finite System
Recycling of Automotive Laminated Waste Glass in Ceramic
Evaluation of the Addition of Electric Arc Furnace Dust in Hot Metal Changind the Type of the Crucible
Bottom Ash from Mineral Coal as Aggregatein Mixtures for Ceramic Products
Characterization of Converter Refractories for Recycling
Characterization of BOF Dust for Pellets Production Used in Blast Furnace
Production of Zeolite from Rice Husk Ash
Potential Evaluation of Gray Clay as Adsorbent of Heavy Metals Zinc (II) and Lead (II)
Use of Glass Particles from Recovered LCD Screen Components as Fillers for Polyamide-6
Reuse of ZrO2(Y2O3) Arising from Making Dental Implant - Characterization of Materials
Relevance of Ornamental Stone Residues in the Manufacture of Concrete Blocks for Structural Masonry
Evaluation of the Thermic Behavior of the Coal as a Byproduct through the Low Temperature Conversion Process - LTC of the Sewage Sludge
Chapter 13: Processing
Organic Binder Burnout in Alumina Processing
Study of the Interaction between Particles of Bentonite: Use of Dispersant Additives
Processing and Properties of Niobia-Doped Alumina Sintered at 1400oC
Porosity and Delamination Defect Detection in Ceramic Materials by Active Infrared Thermography and Optical Digital Microscopy
Effect of Milling Medium on Alumina Additivated with Niobia
Hybrid Membranes Development Made by Chitosan and Calcium Phosphate
Yttria Nettings by Replica Processing
Comparative Study of Solid-Phase and Liquid-Phase Assisted Sintering of Nb2O5-Doped Alumina
Influence of Addition of Polysiloxane on Sintering of Al2O3
Synthesis of Strontium Titanate Nanoparticles by Ultrasonic Irradiation
Analysis of the Mechanical Behavior of Ceramic Filters of the Systems Al2O3-LZSA and Al2O3-SiC
The Influence of Microstructures of Ceramics on the Monitoring of Environmental Humidity
Compaction of ZrO2(Y2O3) Powders with Different Particle Sizes and Effects on the Sintering
Chapter 14: Nanotechnology
Rice Husk Ash Impregnated with Silver Nanoparticles for Water Purification
Nanoparticles Prepared by Sol-Gel Method Used in Pseudoboehmite-Reinforced Nylon 6.12 Nanocomposites
Evaluation of the Influence of a Smectite Clay in PP Composites
Effect of the Addition of a Brazilian Sodium Smectite Clay in Toughened Nylon-6
