- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This book presents the proceedings of the International Conference on Residual Stresses 9 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. The state of the art is presented by the contributions of researchers from both academia and industry. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. Focal points of interest are: simulation of stress profiles, depth-resolved stress analysis using synchrotron radiation and phase transformations in welded structures. This book offers an indispensable overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas, such as, for example, microelectronic devices, sensors and actuators and machine parts, as in the automotive industry.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Contents
Preface, Committee and Sponsors
Chapter 1: Stress Analysis - Diffraction Methods
Keynote Lecture: Residual Stress Gradient Analysis by Multiple Diffraction Line Methods
Stress Measurement of an Austenitic Stainless Steel Foil by cos2χ Method Using Polychromatic Laboratory X-Rays
Different Grain Interaction Models Used for Interpretation of Lattice Strain Data Collected Using Grazing Incidence X-Ray Diffraction
Upgrade Activities on the E3 Residual Stress Neutron Diffractometer
Analysis of Texture Depth Distribution by Energy-Dispersive Diffraction
Residual Stress Analysis by Energy-Dispersive Synchrotron Diffraction: Concepts for High Resolution Depth Profiling in Real Space
Neutron Residual Strain Surface Scans - Experimental Results and Monte Carlo Simulations
In Situ Biaxial Mechanical Testing at the Neutron Time-of-Flight Diffractometer POLDI
Influence of Shot-Peening Parameters on the Sub-Surface Residual Stress Profiles in Al-7075 Alloy Components
Depth-Resolved Residual Stress Analysis with High-Energy Synchrotron X-Rays Using a Conical Slit Cell
Chapter 2: Stress Analysis - Mechanical Methods
Modeling and Measurement of Residual Stresses along the Process Chain of Autofrettaged Components by Using FEA and Hole-Drilling Method with ESPI
Mapping Multiple Components of the Stress Tensor Using the Contour Method
Stress Measurements in Glass and Plastic by Optical Hole-Drilling
Measurement of Residual Stresses in the Cold-Rolled Fe-Ni-Mn/Invar Thermo-Bimetallic Plate
Numerical and Experimental Study of the Plasticity Effect on Residual Stress Measurement Using Slitting Method
A Neural Networks Approach to Measure Residual Stresses Using Spherical Indentation
An Almost User-Independent Evaluation Formalism to Determine Arbitrary Residual Stress Depth Distributions with the Hole-Drilling Method
Evaluation of Residual Stresses Induced by Ultra-High-Speed Drilling in Aluminium Alloys
Influence of the Interfacial Roughness on Residual Stress Analysis of Thick Film Systems by Incremental Hole Drilling
Investigation of Residual Stresses in Flame Sprayed Ni-Based Wear Resistant Coatings by the Hole-Drilling and X-Ray Methods
Bending Test Rig for Validating the Hole Drilling Method Residual Stress Measurement
Measuring in-depth Residual Stress Gradients: The Challenge of Induction Hardened Parts
Technology and Equipment for Determination of Residual Stresses in Welded Structures Based on the Application of Electron Speckle-Interferometry
Hole-Drilling Method for Residual Stress Measurement - Consideration of Elastic-Plastic Material Properties
Chapter 3: Stress Analysis - Other Methods
Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening
Use of the Eigenstrain Concept for Residual Stress Analysis
Third Order Elastic Constants and Rayleigh Wave Dispersion of Shot Peened Aero-Engine Materials
An Attempt to Find an Empirical Model between Barkhausen Noise and Stress
Birefrengent Residual Stress and Improved Injection Mold Design
Chapter 4: Instrumental Developments
XRD2 Stress Measurement for Samples with Texture and Large Grains
Alignment of a ¼-Circle Cradle for Reliable Residual Stress Measurements
Standard Sample Package for Calibration of X-Ray Stress Measurement
Chapter 5: Thin Films / Stress Gradients
Stress of Homogeneous and Graded Epitaxial Thin Films Studied by Full-Shape Analysis of High Resolution Reciprocal Space Maps
Diffraction Stress Analysis of Fiber Textured Ti Thin Films Undergoing hcp - fcc Phase Transformation
The Influence of Multilayer Design on Residual Stress Gradients in Ti/TiAlN Systems
Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending
Characterisation of the Residual Stresses in HVOF WC-Co Coatings and Substrates
Chapter 6: Microstructure, Local Stresses
Study of Stresses in Texture Components Using Neutron Diffraction
Macroscopic and Microscopic Determinations of Residual Stresses in Thin Oxide Dispersion Strengthened Steel Tubes
Cementite Dissolution in Cold Drawn Pearlitic Steel Wires: Role of Dislocations
In Situ Structural Evolution of Steel-Based MMC by High Energy X-Ray Diffraction and Comparison with Micromechanical Approach
Inter-Granular Phase Formation during Reactive Diffusion of Gallium with Al Alloy
Evolution of Residual Micro Phase and Orientation Dependent Stresses during Cold Wire Drawing
Thermal Stress Estimation of Tungsten Fiber Reinforced Titanium Composite by In Situ X-Ray Diffraction Method
Distribution of Residual Stresses in 1070 Single Phase Aluminium with Grain Size Gradient Formed by RBT Treatment
Comparison of Internal and Residual Stresses Measured by Strain-Dip Test and XRD during High Temperature Deformation of Al-Mg Solid Solutions
Study on Ductile Damage Progress of Aluminum Single Crystal Using Synchrotron White X-Ray
Micro Stresses within Cu Bi-Crystal and Al Tri-Crystal after Plastic Deformation Observed by X-Ray and Neutron Diffraction
Characteristic Evolution of Residual Stress in Shape Memory Fe-Mn-Si-Cr Alloys
Synchrotron Diffraction Study of the Cementite Phase in Cold Drawn Pearlitic Steel Wires
Chapter 7: Manufacturing Processes
Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting Tools
Prediction of the Distortions Caused by the Redistribution of the Residual Stresses During Machining Using FEM
In Situ XRD Stress Analysis during Expansion of Stents
Sensitivity of Macro- and Micro-Residual Stress States of Steel Surfaces to Thermal Influences Caused by Grinding Burn and Laser Treatments
Non-Destructive Residual Stress Analysis of Induction Hardened Components by Neutron and X-Ray Diffraction
Residual Stresses in the Hot Sprues of as-cast Mg-Zn Alloys Investigated by STRESS-SPEC Neutron Diffractometer
Through-Thickness Stresses in Automotive Sheet Metal after Plane Strain Channel Draw
Interpretation of Diffraction Data from In Situ Stress Measurements during Biaxial Sheet Metal Forming
The Influence of Chemical Composition on Residual Stresses in NiCoMo Alloy Deposits on 12 Ni Maraging Steel
Simulation of the Roller Straightening Process with Respect to Residual Stresses and the Curvature Trend
Residual Stresses Profiles of Cladded Austenitic Stainless Steel Evaluated by X-Ray Diffraction and by Incremental Hole-Drilling Method
Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy
Shaping of Ceramics Using Residual Stresses
In Situ Strain Measurements during Casting Using Neutron Diffraction
Influence of Final Hand Polishing Process on Surface Residual Stress Field of Japanese Sword
Chapter 8: Mechanical Surface Treatment
3D Model of Shot Dynamics for Ultrasonic Shot Peening
Mechanical Surface Treatment Technologies for Improving HCF Strength and Surface Roughness of Blisk-Rotors
Surface Modification Analysis after Shot Peening of AA 7075 in Different States
Residual Stress Depth Distribution after Piezo Peening of Quenched and Tempered AISI 4140
Influence of Shot Peening Parameters on Residual Stresses in Flake and Vermicular Cast Irons
Graphite Morphology's Influence on Shot Peening Results in Cast Irons
The Influence of Shot Peening Process on the Residual Stress and Microstructure in Deformed Surface Layer of S30432 Austenitic Stainless Steel
The Evolution of Residual Stress and Microstructure in Shot Peened S30432 Austenitic Stainless Steel at High Temperatures
Characteristics of Residual Stress by Water-Jet Peening
Corrosion and Fatigue of AL-Alloys AA359.0 and AA6060 in Different Surface Treatment States
Generation and Determination of Compressive Residual Stresses of Short Penetration Depths
Chapter 9: Welding and Joining
The Investigation of the Triaxial Residual Stress in the Friction Stir Welded Lap Joint Using Neutron Diffraction
Automatic Meshing Method for Optimisation of the Fusion Zone Dimensions in Finite Element Models of Welds
Welding Residual Stresses in Tubular Joints
Residual Stress Engineering in Fatigue Resistant Welds
Residual Stress in Steel Fusion Welds Joined Using Low Transformation Temperature (LTT) Filler Material
An Experimental Comparison of Weld-Induced Residual Stresses Using Different Stainless Steel Filler Metals Commonly Used for Hydraulic Turbines Manufacturing and Repair
Effects of Residual Stresses on the Fatigue Performance of Welded Steels with Longitudinal Stiffeners
In Situ Measurement of Thermal Strain during Fusion Welding
Numerical Analysis of the Effect of Phase Transformation on Residual Stresses in an Autogenous Beam Edge Weld
Effect of Martensitic Phase Transformation on Stress Build-up during Multilayer Welding
Identification of Weld Residual Stresses Using Diffraction Methods and their Effect on Fatigue Strength of High Strength Steels Welds
Identification of Load Induced Inhomogeneous Plastic Deformations in Aluminium Welds by Diffraction Methods
Predicting Residual Stresses in Friction Stir Welding of Aluminum Alloy 6061 Using an Integrated Multiphysics Model
An Abaqus Extension for 3-D Welding Simulations
Neutron Diffraction Investigation of Residual Stresses Induced in Niobium-Steel Bilayer Pipe Manufactured by Explosive Welding
Chapter 10: Material Loading, Damage and Component Life
Wear and Surface Residual Stress Evolution on Twin-Disc Tests of Rail/Wheel Steels
Finite Element Analysis of the Rolling-Sliding Contact of Vibrationally Loaded Bearings Based on a Micro Friction Model
Service Loading Analysis of Wind Turbine Gearbox Rolling Bearings Based on X-Ray Diffraction Residual Stress Measurements
An Experimental Procedure to Determine the Interaction between Applied Loads and Residual Stresses
Residual Stresses in Rail-Ends from the in-Service Insulated Rail Joints Using Neutron Diffraction
Impact of Residual Stresses on the Fatigue Behavior of a Nickel-Based Superalloy
Residual Stresses in Roller Bearing Components
