- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The collection of 276 peer reviewed papers covers various high-tech fields including electronics, machinery, materials, manufacturing, testing, and disciplines of physical, chemical and biological.
The papers are grouped as follows:
Chapter 1: Micro and Nano Fabrication;
Chapter 2: Micro Sensors;
Chapter 3: Micro Actuators;
Chapter 4: Microfluidics and Nanofluidics;
Chapter 5: Bio MEMS and Applications;
Chapter 6: Nanomaterials;
Chapter 7: Optical MEMS (MOEMS);
Chapter 8: Power MEMS;
Chapter 9: Nano Devices and NEMS;
Chapter 10: Nanobiology, Nano-Bioinformatics, Nanomedicine;
Chapter 11: Packaging, Sealing and Assembling Technologies;
Chapter 12: MEMS/Nano Related Research.
Contents
Preface
Chapter 1: Micro and Nano Fabrication
Analysis of Fabrication Errors on Micro-Spring's Elastic Coefficient
Design and Fabrication of an Aerodynamic Micro-Air Journal Bearing Using Micro-Wire Electrical Discharge Machining
Fabrication and Characteristics of the Nano-Polysilicon Thin Film Transistors
Fabrication and Characterization of Tin Oxide Inverse Opal by Template Method
Fabrication of Low Stress PECVD-SiNx Film in High Frequency Mode
Fabrication of Sub-Micro Metal Tips for In-Plane Field Emission Research
Fabrication of Super-Hydrophobic Surface on Stainless Steel Using Chemical Etching Method
Fabrication of the Nanoscale Flat-Bottomed and Lamellar Structures on HOPG Surface by STM-Based Electric Lithography
Micro-Hole Drilled by EDM-ECM Combined Processing
Fabrication of ZnTiO3 Nanofibers by Electrospinning
Study on the Performance of Y-Branch Waveguide Modulator Affected by the Fabrication
A Novel Microelectrode Array Probe Integrated with Electrophysiology Reference Electrode for Neural Recording
Chromium Atomic Deposits under the Disturbance of Straight Edge Diffraction
Controllable Synthesis of Single-Crystal Monolayer Graphene on Copper Foils by Low-Pressure Chemical Vapor Deposition
Controlled Synthesis of Surface-Clean Monolayer Graphene
Cu (II) as a Catalyst for Hydrogen Peroxide System Abrasive-Free Polishing on Hard Disk Substrate
Evaluation Methods on Adhesion Property between SU-8 Photoresist and Metal Substrate
Fabrication and Properties of a New Type Micro Super-Capacitor
FEM Simulation of the Thermo-Mechanical Behavior of TSV 3D MEMS Structure
Numerical Analysis of Molding Process for Roll Imprinting Based on ABAQUS
On the Test Method of Dynamic Characteristics of MEMS Components
Research on Machining Method of Spatial Rotary Curved Surface
Research on the PDMS Surface Modification Technique
Single Phase Pyrite Synthesized via Hydrothermal Method
Thermal Analysis of a Face-to-Back Bonded Four-Layer Stacked 3D IC Model
Ultra-Precision Turning Technology of Gold Cone in Fast Ignition
Chapter 2: Micro Sensors
MEMS Relay Optimization Design Algorithm Based on Particle Swarm Optimization
Design of an Array Bionic Vector Vibration Sensor Based on MEMS
Design of 6H-SiC High Temperature Pressure Sensor Chip
Microelectromechanical Hybrid Gyroscope Design of Closed-Loop Detection Circuit Based on FPGA
Influence of Dimension and Temperature on Capacitive Humidity Sensor
Research on Zero Bias Characteristic of FBW Gyro
A Single FBAR-Based Temperature and Pressure Sensors
The Key Technologies of SOI Micro-Accelerometer Front Release Process
Platinum Resistance Microsensor for Cryogenic Temperature Measurement
Research on the Method of Laser Trimming to Reduce the Mode Coupling Error of Micro-Machined Vibratory Gyroscopes
Projectile-Borne Meteorological Information Detection Dropsonde Integrating Micro-Sensors
Development of Data Acquisition System for Micro-Accelerometers' Dynamic Centrifuge Test
Y-Type Branch Waveguide Used in Resonant Micro-Optic Gyro
Analysis of Intensity Variation of Laser in Resonator Micro-Optic Gyro
A Novel Noise Resistance Optical Accelerometer Based on Micro-Ring Resonant Cavity
The Design of a Membrane Biosensor
Optical Current Sensor Technology in Power System
The Effect of Casimir Force to the Performance of the Micro-Accelerometer
Capillary Condensation Adhesion Phenomena and Analysis of the Micromechanical Gyroscope
Research on Mean Filtering Algorithm in Resonant Micro-Optic Gyro Signal Processing Based on Labview
A Sub 0.8 Degree per Hour Mode-Matching MEMS Vibratory Gyroscope with Closed Loop Control for the Sense Mode
Tunable Microring Filter Based On-Chip Interrogator for Wavelength-Modulated Optical Sensor
Effect of Adsorption Stress-Induced Change in Neutral Layer Position on Static Behavior of Microcantilever Gas Sensor
A Novel Structure of Polyimide-Based Humidity Sensor Used in Low Temperature Environment
Temperature Model for a Vacuum Packaged MEMS Gyroscope Structure
Edge Effect on Viscous Drag of the Rotor in Liquid Floating Rotational Micro-Gyroscope
Micro-Displacement Sensing Circuit for Gyroscope with Levitated Rotor
Liquid-Suspended Rotor Gyroscope Multiphase Driving Technology
Design of Hall Vehicle Speed Sensor Comprehensive System
System Simulation and Test of a Field Emission Accelerometer
A Fourth-Order MASH Sigma-Delta Modulator in Inertial Sensors
Research on Micro Twin-Bridges Catalytic Combustion Type Kerosene Gas Sensor Technology
Design of Monolithic Differential Quartz Vibrating Beam Accelerometer with Optimized Electrode Layout
Research on Characteristics of Mercury Droplet Flow in Micro Acceleration Switch
Fundamental Study of the Micro-Cantilever for more Sensitive Surface Stress-Based Biosensor
Influence of the Excitations and Detection Positions on the Sensitivity of Magnetoelastic Biosensors
Design of Conductive MWNTs/SiO2 Humidity Sensor Interface ASIC Based on AC Signals
A New Approach to Determine the Centroid of Star Spot for Star Tracker Based on MEMS-Gyro
A PID&AGC Method for Micro Vibration Gyroscope Drive System
Structural Design of 2D Piezoresistive Micro-Force Sensor
A High Bandwidth Sigma-Delta Modulator Applied in Micro-Gyroscope
Modeling of Nonlinear Stiffness of Micro-Resonator in Silicon Resonant Accelerometer
Nonlinearity Analysis of Closed-Loop ΣΔ Micro-Mechanical Accelerometer
The Design of a Micro Self-Powered Wireless Analog Sun Sensor
A SOI-MEMS Piezoresistive Atmosphere Pressure Sensor
An Improved Phase Lock Loop for Micromechanical Gyroscope with a Carrier Modulation
A Novel Flexible Shear Stress Sensor Array with Double Hot-Wires Based on MEMS
Portable-Surface Plasmon Resonance Biosensor Immunoassays for the Human Serum Albumin Detection
A Novel Z-Axis Capacitance Accelerometer with Highly Symmetrical 16-Beam Structure
Sine-Wave Exciting Circuit for Quartz Vibrating Gyroscope
Design and Fabrication of a Novel Biaxial Piezoelectric Micro-Gyroscope
A Novel Initial Alignment Based on the HMM/Steady State KALMAN Filter
Analysis of Magnetic Field for Micro Axial-Flux Electromagnetic Generator
Design of a MEMS Resonant Wind Sensor on Airplane Wing
Electrochemical Characteristics of Aptasensor Based on MEMS Thin-Film Gold Electrode
Electrospun ZnO Nanowires as Gas Sensors for Propanol Detection
Modeling of Vibratory Microgyroscope with Manufacture Errors Based on Parameters Identification Theory
Replication, Characterization and Simulation of Micro Injection Molded Microlens Arrays Using Technical Amorphous Polymers
Simulation Research of the Long-Base Silicon Magnetic Sensitive Diode Negative-Resistance Characteristics on the Base of ATLAS
Study of High-Temperature MEMS Pressure Sensor Based on SiC-AlN Structure
The Design of the Integrator of Sigma-Delta Modulator
The Study on the Analytic Model and Design Software for IP of Piezoresistive Cantilever Beams
The Characteristics of MEMS Based Seismic Sensors Using the Electrochemical Approach
Simulation Research on Micro-Cavity Flow Field Characteristics of Liquid Floating Rotor Gyro
Chapter 3: Micro Actuators
Design of Screw Wheel Micro In-Pipe Robot Control System
Design and Simulation of High Efficient MEMS Electrothermal Actuator
Parametric Identification of Bouc-Wen Hysteresis Model for Piezoelectric Ceramic Actuator Based on Immune Particle Swarm Optimization Algorithm
Bouc-Wen Model Parameter Identification for Piezoelectric Actuator Using Chaos Particle Swarm Optimization
Analysis of an Electrostatic Micro-Actuator Based on Vertically-Horizontally Bending
Performance Comparison of Typical Electrothermal Actuators
Photothermal Microactuators Fabricated by LIGA Technology
Preparation of Graphene-Containing Composite Film and the Research on its Thermal Conductivity
Preparation of In2O3/MWCNTs Nanocomposites and their Gas-Sensing Property to Ethanol
Research on MEMS Based Real-Time Measurement System for Motion Information of the Vehicle
Resonant Point Tracking and Locking Technique Based on Microsphere Resonator
Chapter 4: Microfluidics and Nanofluidics
A Microfluidic Chip Microwave Bonding Method Based on the PMMA
A Novel Microfluific Design for Cell Culture and Test
An Interstitial Fluid Transdermal Extraction Chip with Vacuum Generator and Volume Sensor for Continuous Glucose Monitoring
Application of Nanomaterials in the Fields of Drilling Fluids and Completion Fluids
Bubble-Induced Relaxation in High-Pressure Microfluidic Systems
Heat Transfer-Fluid Coupled Simulation for Smart Meteorological Microsystems
Microfluidics Design for Single Cell Detection
The Thermochemotherapy Effect of Mn0.5Zn0.5Fe2O4 Magnetic Fluid Hyperthermia Combined with As2O3 on GLC-82 Cells
A New Fabrication Method for Paper-Based Microfluidic Device Used in Bio-Assay
Effects of Anode Serpentine Flow Fields on the Performance of μ-DMFC
Electrohydrodynamic Direct Writing Platform Based on Near-Field Electrospinning
Studies on Preparation of Diet Microcapsules by Using Digitalization of Microfluids Technology
The Preparation of High Concentration Silver Nanoplates with Liquid-Phase Reduction Method
The Rapid Fabrication of Hydrogel Microfluidic Chip for Cell Capture Culture and Metabolites Detection
Transient Pull-In Analysis of Micro-Plate with Fluid-Structure Interactions
Chapter 5: Bio MEMS and Applications
Design and Fabrication of a Lateral Contact RF-MEMS Switch for MM-Wave Applications
Electrodeposition of Three-Dimensional (3D) Ag/Pd Bimetallic Nanodendrites and Application for Total Nitrogen Determination
Fabrication of Organic-Inorganic Hybrid Nanopore and its Application in Biosensing
Preparation of Thermoresponsive Chitosan Polymers and Its Application Controlling Release of Antifouling Agent
The Design of High-Frequency OTA-C Filter for Wireless Sensors Network Applications
The Study in the Application of Nanotechnology Digital Printing in Clothing Pattern Design
A PDMS Micropump for Implantable Drug Delivery Application
Application of Electrical Resistance Tomography to Ice-Water Two-Phase Flow Parameters Measurement
Effect of pH on Hard Disk Substrate Polishing in Glycine-Hydrogen Peroxide System Abrasive-Free Slurry
Large Scanning Range and Rapid AFM for Biological Cell Topography Imaging
The Study of Correlations among Parameters in Electrohydrodynamics Micro-Jet Printing System
Chapter 6: Nanomaterials
A Parallel Computing Dynamic Task Scheduling System for Nano-Materials Design and Simulation
The Preparation of Size-Controlled Antimony Nanoparticles by Electrochemical Method
Analytical Method for Calculating Curvature of Circular Silicon Wafer Caused by Boron Doping
Characteristic Research of SOI Rib Waveguide Resonators with SiO2 Deposited
Charge Storage Characteristics of Ni-NiOx Core-Shell Nanocrystals Embedded in SiO2 Gate Oxide
Color Filters Based on the Subwavelength Triangular-Lattice Cylinder Arrays in Metal-Dielectric Films
Combined Torsional Buckling of Carbon Nanotubes Subjected to Thermo-Electro-Mechanical Loadings with Consideration of Scale Effect
Composite Content Influence on Multiwall Carbon Nanotubes-SiO2 Film Humidity Sensors at AC Testing
Highly Efficient Nano-Catalysts Using Activated Carbon as a Support for One-Step Oxidation of Cyclohexane to Adipic Acid
Influence of Parameters on Fabricating TiO2 Nanotube by a Hydrothermal Method
Preparation and Characterization of Polyesteramide Composited by Carbon Nanotube
Preparation and Megnetic Performance Study of One Dimensional Co-Ni Nanomaterial
Preparation and Photocatalytic Properties on ZnO/TiO2 Nanotubes
Texturing Multi-Crystalline Silicon Wafer by Ultrasonic Standing Wave in Acid Etching
The Degradation of Polyesteramide Carbon Nanotube Composites
A Novel Method to Modify the Lapping Uniformity for Silicon Wafer
A Novel Electrochemical Sensor for Formaldehyde Based on Platinum Nanoparticle/L-Alanine Modified Glassy Carbon Electrode
A Study on Size Effect of Indenter in Nanoindentation via Molecular Dynamics Simulation
Characterization of Glass-Ceramics by TEM
Determination of Ascorbic Acid Based on a Platinum Nanoparticles Modified Au Electrode
Electrospinning and Characterization Nanofibres of Modified Konjac Glucomannan/PBS
Experimental Investigation of the Thermal Conductivity of the Titanium Carbide Thin Films on Silicon Substrate
Large Area Au Decorated Multi-Walled CNTs Film for Surface Enhanced Raman Scattering
Magnetron Sputtering Ni-Cr Alloy Thin Film Resistance Temperature Characteristic Study
Mechanism of Synthesizing Al2O3/Fe-Al Composites with Nano Al2O3 Fibers by In Situ Process
Microstructure and Mechanical Property of Nanocrystalline Surface Layer on 7A52 Aluminium Alloy
Modified Nanocrystalline Cellulose Used for Improving Formaldehyde Emission and Bonding Strength of Urea Formaldehyde Resin Adhesive
Oxidation-Induced Redshifts in the Energy Gap of Silicon Quantum Dots
Preparation and Photocatalytic Activity of Nd3+and CTAB Co-Doped Nanometer TiO2 Thin Films
Preparation of Cellulose Micro/Nano Fibrils by Sonochemical Method and its Morphological Characterization
Preparation of Composite Spherical Alumina Nanoparticles and Study on their CMP Performance
Preparation of Expanded Graphite-Based Composite Electrode and Electrochemical Degradation of Phenol
Preparation Thin Film Nanocomposite Membrane Incorporating PMMA Modified MWNT for Nanofiltration
Preparation and Characterization of Konjac/Gelatin Composite Nanofibrous Membranes
Reliability Study of the Band Gap of Rare Earth Oxides Measured by XPS Spectra
Research of SPR Phase Detection for Measuring Ultra Thin Metal Film
Research on Formation Mechanism of Black Silicon Based on Matter Wave
Structural and Photoluminescence Characteristics of ZnTiO3:Pb2+ Nanofibers Produced by Electrospinning
Structure and Mechanical Property of Asio Otus Feather Barbs
Study on the Preparation of Streptomycin Imprinted Polymers on the Surface of Silica Micro and Nano Spheres
Synthesis of High Density Boron Nitride Nanotube Film
System-Level Simulation and Fabrication of On-Chip Fatigue Bending Test Structure for Micro-Scale Polysilicon Films
The Effects of RE and Si on the Thickness and Cross Section Morphology of Zn-6Al-3Mg Alloy Coating
The Fabrication of Piezoelectric Vibration Energy Harvester Arrays Based on AlN Thin Film
The Study of Porous Anodic Alumina as Template for the Pit Initiation on Electrode Aluminum Foils
Influences of Crystallization Temperature and Slurry Concentration on Stress of PZT Thick Film Prepared by a Modified Sol-Gel Method
Experimental Study on Single-Layer Laser Cladding Feeding by Micro/Nano Composite Powders
Thermal Assisted UV Digestion Utilizing Nano-TiO2 Photocatalyst for the Detection of Total Phosphorous
Chapter 7: Optical MEMS (MOEMS)
Design and Manufacture of Micro Interference System in Spatial Modulation Fourier Transform Spectrometer
A Short Ultrasonic Motor Stator with Square Base
Influence of Light Scattering Particles on Optical Properties of Polymer Diffusion Plate
Integrated-Optic Tenth-Order Micro-Ring Filters in Silicon-on-Insulator
Nanometer-Scale SOI Based Y-Branch Couplers for High Density Optical Integrated Circuits
Nitrogen Content Influence on Optical Properties of DC Magnetron Sputtered Copper Nitride Films
Novel Fiber-Optic Sensing System for Detection of Methane
Photoacoustic Resonant Cell Remodified from Helmholtz Cavity for Multi-Gas Sensing Using Infrared Lasers
Research on Improving the Measurement Accuracy of Laser Interferometer System
Study on the Mechanism of Rapid Synthesis of Small Grain NaX Type Molecular Sieve with Calcined Kaolin
Three-Dimensional Analysis of Divergence Aangle on Deposition of Chromium Atoms in Laser Standing Wave Field
TiO2 Thin Layer Coated Ag Nanoarrays Complex for Surface-Enhanced Raman Scattering Substrate
Chapter 8: Power MEMS
A Low-Power Photovoltaic Maximum Power Point Tracking Circuit for WSNs
A MEMS Piezoelectric Cantilever Beam Array for Vibration Energy Harvesting
A Low-Distortion Fourth-Order Bandpass Sigma-Delta Modulator Using Double-Sampling Technique
Design and Simulation of Anti-Violent Rocket Engine on Small UAV
Dynamics Research on Electron-Stimulated Desorption of Fluorine from Fluorinated Graphene Surface
Effects of Geometrical Parameters on Performances of Wind Energy Harvester with a Chamber
Chapter 9: Nano Devices and NEMS
Application of Laser Doppler Technique in Detecting the Dynamic Parameter of MEMS Device
Combining Micro-Nanotechnology with Atomic Spin Devices
Development of a Nanomanipualtion System for Handling Nanowires
Micromachined W-Band Waveguide Duplexer Design Based on MEMS Technology
Generalized Thermal Design Model for Comb-Capacitor MEMS Devices Fabricated by Bonding-DRIE Process: A Preliminary Framework
High Impact Dynamic Simulation of Planar S-Form Micro-Spring
Microdevice-Based DNA Extraction Method Using Green Reagent
Single Mask Selective Release Process for Complex SOI MEMS Device
Analysis on the Sticking Failure of Micro-Comb Driving Structure
Design and Simulation Analysis of a New Type of Micro Metal-Plastic Heat Radiator
Design and Simulation of Switched Capacitor Filter for Speed Change Parameter Converter
Preparation of Polyaniline @ Polypyrrole Conductive Composite via In Situ Polymerization
Design of MEMS Piezoelectric Vector Hydrophone
Design of MEMS Wireless Air-Mouse System Based on MEMS Technology
Electrohydrodynamic Printing via Spinneret with Conductive Probe
First-Principle Calculation of the Co Doped Anatase TiO2
First-Principles Calculations on Pure and Y-Doped Anatase TiO2
Gap Adjustable MEMS Comb Resonator
MD Simulation of MEMS "Stiction" and "Snap-Back" Phenomena
Modeling of Particle Migration inside Vibration Bubbles in Bubble-Stretching Dispersion Method
Numerical Study on Thermal Boundary Resistance and Conductive Properties of Cu/Al Interface
Preparation and Characterization of a Micro-Supercapacitor with Three-Dimensional Microelectrode Arrays
Research on the Resonance Properties of E-Type Nano Antenna
Structure Design and Simulation Analysis of Multiple Micro Piezoelectric Cantilevers
Study of Piezo-Induced Surface Vibration in Solids Using Atomic Force Probe
The Electric Field Analysis of Interdigitated Electrode-Array Based on Semi-Analytical Method
The Fabrication of Silicon Nanopin with CsCl Nanoislands and Dry Etching for Field Emission
The Influence of Water Contact Angle on the Colonization of Diatoms (Navicula sp and Pinnularia sp) and Ulva Spores (Pertusa)
The Omnipolar Integrated Magnetic Switch Based on GMR
The Oxygen Plasma Dry Release Process of the Membrane Bridge of RF MEMS Switches
The Reliability of Micro-Spring under Dynamic Circumstances
The Study of Free-Standing Diamond Film SAWF
Trends of MEMS-Based Vibration Energy Harvester
Ultrahigh-Resolution MEMS Humidity Sensing Elements Based on Film Bulk Acoustic Wave Resonators
Ultrasonic Energy Characteristics of ZnO Piezoelectric Thin Films Array Based on MEMS
Uniformity Analysis of Temperature Distribution in the Grating Embossing Mold by Induction Heating
A Single Cells Patterning Approach for Human Promyelocytic Leukemia Cells
Chapter 10: Nanobiology, Nano-Bioinformatics, Nanomedicine
A Novel Analytical Method for Designing Microelectromechanical Filters
Effects of Plasma Nitriding and TiN Coating Duplex Treatment on Tribological and Electrochemical Properties of Cast Pure Titanium
Antifouling Performance of Surface Microtopographies Based on Sea Star Luidia quinaria
Capture of Charged Polymer in Salt Solution
Electrochemical Measurement of Copper, Lead and Zinc Ions in Tap Water by Using an Environment-Friendly Microelectrode
Molecular Dynamics Simulation Research in Water Adsorption on Aluminum Surface
Morphology Controlled Nanostructure of Zinc Porphyrin
Photocatalytic Degradation of Organic Pollutants at Solution Bulk with Pigment/TiO2 Nanocomposite
Preparation of PEI-Fe3O4/Survivin-siRNA Magnetic Complex and its Anti-Tumor Effect Combined with MFH on Lung Carcinoma Cells
Prussian Blue Modified Ferritin Nanoparticles as Peroxidase and Catalase Mimetics and their Application in Glucose Detection
Simulations and Experimental Studies on Biomolecules Passing through Polycarbonate Ultrafiltration Membrane
Smart Structural Health Monitoring Based on Detecting Picometer-Scale Wavelength Shift of Fiber Bragg Grating
Synthesis of Biomorphic Ceria Templated from Crucian Fish Scales
Chapter 11: Packaging, Sealing and Assembling Technologies
A New Packaging Method of Alkali Metal Simple Substrate and Related Key Techniques
Influence of Package on Micro-Accelerometer Sensitivity
A Robust Location Algorithm for PCB's Solder Joints
An Investigation into the Influencing Factors for Polymer Melt at the Filling Stage in Micro Injection Molding
MEMS Monolithic Integration Technology
New Structure of Crossing Magnetic Poles on Magnetic Fluid Seals
Study on the Air Damping of the Movable Armature
The Effect of Vibration Noise for Cavity Ring Down Time Extraction
The Study of Glass Cutting Based on the Micro-Crack Control
Chapter 12: MEMS/Nano Related Research
Aerosol Jet Printing on Radio Frequency IDentification Tag Applications
Characterization of Atmosphere PM2.5 and Dustfall in Xining (China)
Concentration Variation and Morphological Types of PM2.5 in Suburban of Yinchuan City
Mineral Characteristics Analysis of PM2.5 in Northern China
Fabrication of Transparent Conductive Film Using Water-Based Nano-Silver Gravure Ink
A Control Algorithm for Near-Infrared Spectra Detection System Based on Grating Light Modulators
A Low Noise Operational Amplifier Design Using Chopper Stability
Characteristics of Pore-Throat Structure and Mass Transport in Ultra-Low Permeability Reservoir
Effect of the Surface Roughness on the Detecting Capacitance
Effects of Different Relevant Layers on Magnetic Properties of Bottom Synthetic IrMn Spin Valves
Finite Element Analysis of Failure in Cu Interconnect Megasonic Cleaning
Immune PI Controller on Magnetic Levitating Ultra Precision Stage
Investigation on the Data Processing Method for High-Precision Alignment of PM Fibers
Low Stress MEMS Delay Mechanism
Mathematical Modeling of a Direct Methanol Fuel Cell with a Novel Structured MEA
Modeling Analytically the Pull-In of Double-Cantilever Structure
Modeling of Ultra-Precision Piezodriven Positioning System
Optimization Analysis on the Transmission Characteristics of Semi-Circle Long-Range Dielectric-Loaded Surface Plasmon-Polariton Waveguides
Research on the Customer Requirement Processing for Mass Customization
Research on the Gas Sensing Enhancement by Using CNT/ZnO Composites
Study on Active Vibration Control
Sub-Pixel Image Matching Based on the Fractal Dimension
Ultrasonic Attenuation of High Concentration of Micron Particle Clouds
Uncatalyzed Oxidation of Cyclohexane in the Microchannels
