- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This volume contains papers that were presented at the Symposium Metallurgy and Materials Engineering in the framework of the 16th International Conference on Quality in Research (16th QiR, 22 - 24 July 2019, Padang, Indonesia). Collected papers represent to readers the results of scientific research and engineering decisions in the field of metallurgy and welding technologies, functional materials, and materials for energy storage devices, chemical technologies, biomedical materials, and composites.
Contents
Preface
Chapter 1: Materials for Energy Storage Devices
Characterization of LTO/Silicon Oxycarbide with Activated Carbon Addition for Anode of Lithium-Ion Batteries
Integration of Reduced Graphene Oxide in Platinum-Free Counter Electrode of Dye-Sensitized Solar Cell
Optimizing Performance of Li4Ti5O12 (LTO) by Addition of Sn Microparticle in High Loading as Anode for Lithium-Ion Batteries
Optimizing Performance of ZnO Nanorod and Activated Carbon as a Composite Anode for Lithium-Ion Batteries
Performance of Coconut Shell Activated Carbon in LiMn0.7Fe0.3PO4/CNT/C Composite for Lithium Ion Battery Cathode
Preparation of Activated Carbon Derived from Water Hyacinth as Electrode Active Material for Li-Ion Supercapacitor
The Effect of KOH Activator Concentration upon the Characteristics of Biomass-Derived Water Hyacinth Process on Lithium-Ion Capacitor
Chapter 2: Biomedical Materials
Electrophoretic Deposition Performance of Hydroxyapatite Coating on Titanium Alloys for Orthopedic Implant Application
Material Selection Based on Finite Element Method in Customized Iliac Implant
Recyclability of Dental Gypsum via Calcination
The Coating of Bovine-Source Hydroxyapatite on Titanium Alloy (Ti-6Al-4V ELI) Using Electrophoretic Deposition for Biomedical Application
The Effect of Additional Zinc Oxide to Antibacterial Property of Chitosan/Collagen-Based Scaffold
Effect of Multiwalled Carbon Nanotubes (MWCNTs) on the Micro-Hardness and Corrosion Behaviour Mg-Zn Alloy Prepared by Powder Metallurgy
Electrophoretic Deposition (EPD) of Natural Hydroxyapatite Coatings on Titanium Ti-29Nb-13Ta-4.6Zr Substrates for Implant Material
Response Surface Methodology Study on Macroporous Hydroxyapatite Prepared by Protein Foaming-Consolidation Method
Degradation Characteristics of Mg-1,6Gd Alloy at Low Thickness Reduction of Warm Rolling
Chapter 3: Composites
Delamination Damages of Drilling Epoxy/Carbon/Basalt Fiber Reinforced Hybrid Composites Using Conventional Drill Machine
Effect of Nano-Al2O3 on Characteristics of Aluminium A356 Matrix Composite Produced by Stir Casting Route
Study of Mechanical Properties of Hemp Fiber Composites for Electric Bicycle Frames
The Development of Natural Rubber Composite Based Canal Blocking to Sustain Peatland Environment
The Role of Al2O3 Particles on Mechanical Properties and Microstructure of Aluminum A356 Composites Produced by Stir Casting Method
The Strength of Polylactic Acid Composites Reinforced with Sugarcane Bagasse and Rice Husk
Chapter 4: Functional and Special Materials
Superparamagnetic Nanoparticles with Mesoporous Structure Prepared through Hydrothermal Technique
Tribological Study of Addition Oleic Acid in Palm and Coconut Oils as Bio-Lubricants
Local Silica Sand as a Substitute for Standard Ottawa Sand in Testing of Cement Mortar
Effect of Cobalt Content on the Structural Properties of Zirconia Prepared by Sol-Gel Method
Preliminary Study on Gallium-Based Particle Synthesis by Ultrasonication for Microfluid Application
Surface Mechanical Properties of Tool Steel on the Addition of Carbon Nanotubes with the Process of Flame Spray Tungsten Carbide Coatings
The Comparison of Nitrogen Atom Solubility in the Formation of Surface Layer on Stainless Steel and Alloy Steel
Chapter 5: Materials and Technologies of Chemical Production
Analysis of NiMoP/γ-Al2O3 Catalyst Preparation with Impregnation and Microwave Polyol Methods for Bio-Jet Production
The Role of Anionic Surfactant to the Particle Size Reduction of Conductive PANi
Micro-Fibrillated Cellulose Fabrication from Empty Fruit Bunches of Oil Palm
Study on the Effect of Bleaching Treatment on the Mechanical Properties of Kenaf Fibers
Performance of Mesoporous Organo Silica Membrane for Desalination
Activated Natural Zeolite Membrane for Separating Dissolved Impurities in Coconut Sap
Adsorption of CO Gas and Cigarette Smoke Using NiO-Modified Metal Activated Carbon
Modified Activated Carbon Using NiO for Natural Gas Storage
Numerical Simulation of Carbon Dioxide Absorption by Monoethanolamine Solution with Super Mini Ring Contactor
Solvent Effects on the Synthesis of Polymeric Nanoparticles via Block Copolymer Self-Assembly Using Microporous Membranes
Study of Zeolite Usage in Thermal Degradation Process of Polypropylene Pyrolysis
Chapter 6: Welding Technologies
Mechanical Properties and Microstructure of Pulsatile Current Gas Tungsten Arc Welding (PC-GTAW) of AISI 304L Butt Joint Weld
Integrity Analysis of a Vessel Subject to Weld Repair and Post-Weld Heat Treatment: Thermal Stress Distribution Using Numerical Approach
Optimization of Gas Metal Arc Welding (GMAW) Parameters for Minimum Distortion of T Welded Joints of A36 Mild Steel by Taguchi Method
Study the Effect of Welding Position and Plate Thickness to the Mechanical and Microstructural Properties of the TIG Dissimilar Metal Welded between Carbon Steel ASTM A36 and Stainless Steel 304 Plates
Chapter 7: Metallurgical Engineering
Alteration in the Phase Morphology of Ti-6Al-4V Alloy Produced Using Directed Energy Deposition
Die Soldering Behavior of H13 and Cr-Mo-V Tool Steel on Die Casting Process on Nitriding-Shot Pinning Die Surface Treatment
Effect of Coal Blended on the Physical Properties of Iron Ore Briquette for Direct Reduction Iron
Effect of Cooling Rates during a Double Stage Solution Treatment on the Massive Phase Formation in Ti-6Al-4V Alloy
Evaluation of Austenite Grains Growth in High Nb and Low Nb HSLA Steel
Influence of Manganese on the Recrystallization Characteristics and Texture Development of Cu-29Zn Alloys
Investigation of Dynamic Recrystallization Phenomenon in Drawn Ti-6Al-4V Alloy
Massive Phase Transformation as a New Prospective on Microstructural Design in a Titanium Alloy - A Review
Study of Low-Grade Nickel Laterite Processing Using Palm Shell Charcoal as Reductant
The Use of Local Raw Materials for the Manufacturing of Import Substitution Casting Products on Investment Casting Technology
Effect of Strontium Addition in Graphite Morphology and Nodularization of Hypoeutectic Cast Iron
