- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This book presents the proceedings of the THERMEC'2018: 10th International Conference on Processing and Manufacturing of Advanced Materials, which took place between July 09 and July 13, 2018 in Paris, France, under the co-sponsorship of Universite de Lille, MINES ParisTech, PSL and Universite de Tours, France. The presented book will be useful for many researchers and engineers/technologists working in different aspects of processing and fabrication of materials, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, smart materials as well as the advanced measurement techniques in the materials science.
Contents
Preface
Chapter 1: Steels. Properties and Processing Technologies
Effect of Mo, Nb and V on Hot Deformation Behaviour, Microstructure and Hardness of Microalloyed Steels
Extended Application of Hardness Prediction System for Temper Bead Welding of A533B Steel to Various Low-Alloy Steels
Cracking and Failure in a High Strength Low Alloy Steel during Solidification
Effect of Annealing Conditions on the Dissolution Process of Complex Carbonitrides in a V-Nb-Ti Microalloyed Steel
The Effect of Test Temperature on Deformation Microstructure and Fracture Mechanisms in CrMn High-Nitrogen Steels Alloyed (0-3 wt.%) with Vanadium
Characterisation of Precipitation and Coarsening of Carbides during Tempering in a Low Alloyed Quenched and Tempered Steel
On the Microstructural Characteristics of UFG Microalloyed Steel Influencing the Mechanical Behavior under Dynamic Loading
Critical Strain for Complete Austenite Recrystallisation during Rough Rolling of C-Mn Steel and Nb-Ti-V Microalloyed Steel
Effect of Quenching and Partitioning Processing on Microstructure and Mechanical Properties of a Low Alloyed Steel
Optimization of Pulse-Step Method for Liquid Steel Alloying in One Strand Slab Tundish
Induction Hardening of a 0.40 % C Novel Microalloyed Steel: Effects of Heating Rate on the Prior Austenite Grain Size
Microalloying Additions to Commodity C-Mn Structural Steels: Fundamental Strengthening Mechanisms Leading to Improvements in Mechanical Properties, Alloy Optimization, Reduced Alloy Costs and Robustness of Hot Rolling Processing
An Integrated Model for Rolling Schedule Design of Microalloyed Steels
Influence of Aluminium on Castability of V-Microalloyed Steels
Through-Scale Analysis of Strain Path Effects in Microalloyed Austenite Subjected to Reverse Rolling
Modelling of the Influence of Prior Deformation of Austenite on the Martensite Formation in a Low-Alloyed Carbon Steel
High Strength High Ductility Low Alloyed Steel
Effect of Ti on the Microstructure and Mechanical Properties of a Hot Rolled Advanced High Strength Steel Strip
Surface Defect Formation in Steel Continuous Casting
Microstructure, Texture, Mechanical and Corrosion Performance of the Stainless Duplex Steel UNS S32205 Submitted to Warm Rolling
Prediction of the Hydrogen-Induced Damage to Ultra-High Strength Steel Concepts
Nucleation Effect of Ca-Oxysulfide Inclusions of Low Carbon Steel in Heat Affected Zone by Welding
Recrystallization and Grain Growth Phenomena in Stainless Steels for Different Thermo-Mechanical Processes
Evaluation of Nanosize NbC Precipitates in HSLA Steel through Microstructural Analysis and Small Angle Neutron Scattering
TMP as an Effective Technique to Produce Ultra-Fine Grained Steels
Critical Conditions of Cold Cracking in High Strength Steel Weld Based on the Local Stress Distribution and Hydrogen Accumulation
Effect of Gap between Steel Sheet and Electrode on Resistance Spot Welding
Effect of Coiling Temperature on the Hardening Mechanisms of a High-Ti Steel
Novel Hot-Rolled Structural Plate Steels with Yield Strength of 700 Mpa and Excellent Usability
Deformation Structures in a Duplex Stainless Steel
Development of the Projection Welding Technology for High-Strength Steel Sheets
Deformation Properties of Austenitic Stainless Steels with Different Stacking Fault Energies
Understanding Hot vs. Cold Rolled Medium Manganese Steel Deformation Behavior Using In Situ Microscopic Digital Image Correlation
Effect of Original Microstructure on Microstructure and Mechanical Properties of High Strength Steel WHF1500H during Hot Forming
Crystal Plasticity Simulation Considering Microstructures of Austenitic Stainless Steel on Macroscopic Yield Function
Analyses of Texture and Deformation Mechanism in Fine-Grained Austenitic Stainless Steels by Electron Back Scatter Diffraction
Microstructures and Mechanical Properties of Welded Joints of Several High Tensile Strength Steel
Change in Yield Strength of Nb-Bearing Ultra-Low Carbon Steels by Temper-Rolling
VC-Precipitation Kinetics Studied by Small-Angle Neutron Scattering in Nano-Steels
Influence of Nb Addition on Impact Toughness of As-Quenched Martensitic Stainless Steel for Automotive Applications
Ferrite-Martensite Dual-Phase Steel Produced by a Modified Quenching and Partitioning Process
Temperature Dependent Mechanical Behavior of ODS Steels
Investigation of the Local Austenite Stability Related to Hydrogen Environment Embrittlement of Austenitic Stainless Steels
Numerical Simulation of Residual Stresses due to Multipass Welding in High Strength Steel Plates and Validation against Experimental Measurements
Magnetic Barkhausen Noise Characterization of the Recrystallization of a Non-Oriented Electrical Steel after Cold Rolling at Different Angles to the Hot Rolling Direction
Numerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint Specimen
Low Density Steels for Forging
Effect of Al on the Microstructure and Mechanical Properties of Hot-Rolled Medium-Mn Steel
Mechanical Behavior of High-Mn Steels Processed by Hot Rolling
Influence of Starting Microstructure on Dilatation Behavior during Tempering of a High Strength Steel
Effect of Tempering on Hardness of Q&T Steel Plate
Integration of Press-Hardening Technology into Processing of Advanced High Strength Steels
Microstructural Evolution and Deformation Behavior of Cold-Rolled Fe-Mn-Al-C Low-Density Steel
Isothermal Transformation, Microstructure and Mechanical Properties of Ausformed Low-Carbon Carbide-Free Bainitic Steel
Effect of Precipitation State on Strength and Toughness of Precipitation Hardened Hot Rolled Steel Sheet
Creep Property of Boron Added 9Cr Heat Resistant Steels after Welding
Microstructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical Processing
Design and Properties of 1000 MPa Strength Level Hot-Formed Steels Possessing Dual-Phase and Complex-Phase Microstructures
Effect of Different Microstructures on the Performance of Air-Cooled Forging Steel 46MnVS5 Fracture Splitting Connecting Rod
The Effect of Heating Rate and Temperature on Microstructure and R-Value of Type 430 Ferritic Stainless Steel
Hydrogen-Assisted Fracture Mechanisms in Ultrafine-Grained CrNi Austenitic Stainless Steels with Different Initial Microstructures
Evaluation of Microstructural Characteristics in Low-Cycle Fatigued Austenitic Stainless Steel Using X-Ray Line Profile Analysis
Processing and Mechanical Properties of Highly Formable Ferritic High Strength Steel Containing Titanium Nanocarbides for Automotive Applications
Challenges of Nb Application in Thermomechanical Processes of Steels for Long Products
An Integrated Model for Predicting Hierarchical Microstructure Evolution of Steel during Hot Rolling
Effect of Ausforming on Creep Strength of G91 Heat-Resistant Steel
Environment-Induced Degradation in Maraging Steel Grade 18Ni1700
Microstructures and Properties of DP 600 Steel Conventionally Treated and Intercritically Annealed from As-Quenched Martensite
Notched Creep Damage Assessment Based on EBSD Observation for Austenitic Stainless Steel
Porosity Developments within 9Cr-1Mo Steel Exposed to CO2
The Effect of Surface Preparation on Surface Damage and Sigma Formation in Duplex Stainless Steel
Physical Simulation Methods Applied to Hot Rolling of Linepipe Steels
Possibilities with Use of Electron Beam Welding of Very High Strength Steel
Middle Shelf During Ductile to Brittle Transition on Ferrite + Pearlite Structure Steel Sheet
Characterization of Hot Deformation Behavior in a 13% Chromium Steel
Microstructures and Mechanical Properties of Tough Ductile Ultrahigh-Strength Steels Processed through Direct Quenching and Partitioning
Effect of Tempering on Bendability and Impact Property of Hot Rolled Low-Carbon Martensitic Steel
Simulation Study on Shear Crack of Steel Plate
The Effects of Hot Deformation of Austenite on the Bainite Transformation in a Fe-C-Mn-Si-Cr Steel
The Study in Improvement of Hole Expansibility for High-Strength Steel of 980MPa Grade
Estimation of Impact Toughness Transition Temperatures of As-Quenched Steels
An Application of Jominy Test Results in Computer Simulation of Steel Quenching
Bendability of Shot Blasted Ultrahigh-Strength Steels
The Study on Welding Technology of 9Ni Steel
Link between Microstructure and Mechanical Behavior of Double Annealed Medium Mn Steel
Microstructure Characterization of Quenching and Partitioning Steels
Effect of Gas Tungsten Arc Welding Condition on Hydrogen Absorption in a Duplex Stainless Steel
3rd Generation AHSS : Mechanistic Responses Enabling Cold Deformation during Stamping
Plastic Deformation Simulation of Sintered Ferrous Material in Cold-Forging Process
Effect of Heat Treatmemt in (α+γ) Range on Mechanical Properties of Austempered Spheroidal Graphite Cast Iron
Influence of Annealing Conditions on the Austenite Size at the End of Soaking
Toward the Development of AHSS for Wear Resistant Applications
Strengthening Mechanisms in Low Carbon Lath Martensite as Influenced by Austenite Conditioning
Microstructure and Damage Mechanisms in Thermomechanically Treated Si-Solution-Strengthened Spheroidal Graphite Cast Iron
Characterisation of Long Term Aging in Esshete 1250 Welds
Low-Temperature Fracture of Ultrafine-Grained Iron
Properties of Induction Reversion-Refined Microstructures of AISI 301LN under Monotonic, Cyclic and Rolling Deformation
Reheat Furnace Thermodynamic, Kinetic and Combustion Considerations for TMCP Processing
Behavior of Fatigue Cracks Generated from a Small Artificial-Defect in Plain Specimen of Copper Processed by Equal Channel Angular Pressing
Austenite Grain Growth Simulation in Welding Heat-Affected Zone
3rd Generation AHSS by Thin Slab Technology
Dynamic Transformation of Austenite at Temperatures above the Ae3
Effect of the Austenite Interface on Pearlite Transformation Behavior
Study on Bainite/Martensite Transformation in Reheated Weld Metals
Experimental Analysis about Heat Treatment Distortion in Bearing Race
Supply Chain Quality Management of Magnesium Components: Concept, Examples and Recommendations
Cast Iron Metalworks in European Urban Furniture Dating Back to the 19th and the Early 20th Centuries
Microstructural Evolution and Wear Behavior Involving the K-Carbides Precipitation of a Fe-25Mn-6.6Al-1.3C Austenitic Steel
Numerical Simulation of GMAW Process from the Heat Source to the Weld Pool Formation
Hot Cracking Susceptibility in Duplex Stainless Steel Welds
Influence of Cu Addition on Microstructure and Mechanical Properties of Fe-0.08C-1Mn-2.5Ni Steel
Impact of L12-Ordered Precipitation on the Strength of Alumina-Forming Austenitic Heat-Resistant Steels
Water Atomized 17-4 PH Stainless Steel Powder as a Cheaper Alternative Powder Feedstock for Selective Laser Melting
Hot Straining and Quenching and Partitioning of a TRIP-Assisted Steel: Microstructural Characterization and Mechanical Properties
Austenitization and Tempering Temperatures Effects on EUROFER 97 Steel
Effect of Number of Roughing Passes on the Dynamic Transformation of Austenite during Simulated Plate Rolling
Chapter 2: Alloys, Intermetallic Compounds and Light Metals. Properties and Processing Technologies
Effect of Heat Treatment on Impact Properties of TC10 Titanium Alloy
Titanium Alloys Anodic Oxidation: Effect of Experimental Parameters on Surface Colouring
Ultrasonic Spot Welding of an Aluminum Alloy for Automotive Applications
Elemental Segregation and O-Phase Formation in a Gamma-TiAl Alloy
Effect of α2 Precipitation on Creep and Tensile Properties of Ga-Added Near-α Titanium Alloys
Microstructural Comparison of an Al-8.0Zn-1.8Mg-2.0Cu Alloy with Typical T6 and T76 Tempers
Degradation of Hardness of Alloys from Phase Coarsening
Formation of Secondary Phases in the Boundary between Surface Defect Grains and Matrix in Third Generation Nickel-Based Single Crystal Superalloy Turbine Blades
Strengthening of a CoCrFeNiMn-Type High Entropy Alloy by Regular Arrays of Nanoprecipitates
Technical Advancement in Fabricating Dispersion Strengthened Copper Alloys by Mechanical Alloying and Hot Isostatic Pressing for Application to Divertors of Fusion Reactors
Forging Process Design and Simulation Optimization of a Complex-Shaped Aluminium Alloy Component
Effect of Grain Size on Mechanical Properties of Mg-0.3at.%Y Dilute Alloy
Investigation of Quench Sensitivity in 6xxx Aluminum Alloys
Microstructural Characterization of Mg-TM (TM=Ni or Cu) - Y Alloys and their Mechanical Property
Strengthening of Magnesium Alloy WE43 by Rotary Swaging
Investigation and Constitutive Modelling of High Strength 6xxx Series Aluminium Alloy: Precipitation Hardening Responses to FAST (Fast Light Alloys Stamping Technology) and Artificial Ageing
Twinning and Detwinning Mechanisms in Beta-Ti Alloys
Microstructures of Ternary Eutectic Refractory Me-Si-B (Me = Mo, V) Alloy Systems
Microstructure and Texture of Cold Rolled and Recrystallized CrNoNi Medium-Entropy Alloy
Mechanical Behavior of Titanium Alloys under Different Conditions of Loading
Laser Welding of Titanium Alloys with an Yb: YAG Disk Source
Consolidation of Magnesium and Magnesium Alloy Machine Chips Using High-Pressure Torsion
Impact of Initial State during Calibre Rolling: Investigating Microstructure and Mechanical Properties of AZ80 Magnesium Alloy
Influence of Initiation Site and Lamellar Divergency on the Overall Kinetics of Cellular Growth and Coarsening in Aged U-Nb Alloys
Modification of LPSO Structure in Mg-Ni-Y Alloy with Strontium
Prediction of Magnetostrictive Properties of Fe-Ga Alloy Based on Internal Energy Model with Magnetomechanical Effect
Apparent Poisson's Ratio for Fe-Ga Alloy Single Crystal due to Magnetostriction
Investigation of the Effect of Homogenization Practice of 6063 Alloy Billets on Beta to Alpha Transformation and of the Effect of Cooling Rate on Precipitation Kinetics
Unique Effect of Carbon Addition on Development of Deformation and Recrystallization Textures in Heavily Cold-Rolled Fe-3%Si Alloys
Control of Dispersolds in 7475 Aluminum Alloy
Solidification and Microstructural Control in Selective Electron Beam Melting of Co-29Cr-10Ni-7W Alloy
Effect of Different Shot Peening Treatments on Fatigue Life in Ti Alloy
Magnetostrictive Property and Magnetic Domain Structure of Fe-Ga Alloy Single Crystal under Tensile Strain
Use of Novel Welding Technologies for High-Entropy Alloys Joining
Structural Stability of Novel Multicomponent AlZn-Based Cast Alloy
Microstructure Development and Related Mechanical Behavior of the ZEW200 Mg Alloy Processed by Differential Speed Rolling and Equal Channel Angular Pressing
Development of Al-Fe-(Cu) Series Alloys for Aluminum Cables and the Related Annealing Behaviors
Phase Transformations in the Brazing Joint during Transient Liquid Phase Bonding of a γ-TiAl Alloy Studied with In Situ High-Energy X-Ray Diffraction
Effect of One-Step and Two-Step Aging Treatments on Microstructure and Properties of an Al-9.0Zn-2.0Mg-2.0Cu Alloy
Effect of Alloy Composition and Pre-Ageing on the Stretch Formability of 6xxx Automotive Sheet Alloys
Characterization of Precipitation Evolution in aZn-Added Al-Mg-Si-Cu Alloy during Artificial Aging at 170 oC
Connecting the Microstructure Stability of Ni Based Superalloys to their Chemical Compositions
Mechanical and Microstructural Characterization of Powder Medium Entropy Alloy
Effect of Deformation Temperature on Microstructure and Mechanical Properties of Low-Alloyed Copper Alloy
Experimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087
Creep Features of Ti-600 Alloy at the Temperature of 650oC
Microstructural Characteristics of Laser Metal Deposited Magnesium Alloy AZ31
Nucleation and Growth of Oxide Particles on Fe-Mn (1 Wt.%) Binary Alloy during Annealing
Effect of Heat Processing Technique on Microstructure and Mechanical Properties of Extrusion Beta Titanium Alloy Tube Blank
Evolution of Texture during Hot Rolling of a New Magnesium Alloy
Thermal Analysis for the Prediction of Grain Refinement: An Experimental Investigation on an AlSiMg Foundry Alloy
The DSC Investigation on Phase Transformations of Directionally Solidified (DS) and Powder Metallurgy (PM) Ni-Base Superalloys
Influence of Precipitation on Twinning in a Mg-Al-Zn Alloy
An Innovative Industrial Process for Forging 7050 Al Alloy
Characterization of Powder Metallurgy High-Entropy Alloys Prepared by Spark Plasma Sintering
Developing Superplasticity in High-Entropy Alloys Processed by Severe Plastic Deformation
Strain Ratio Effect on the Low Cycle Fatigue Behavior and Microstructure of High-Mn Austenitic Alloy Undergoing the Strain-Induced ε-Martensitic Transformation
Effect of Sn Content on Heat Resistance of Mg-3%Al-1%Si Alloy for Casting
Annealing on Anisotropy and Mechanical Properties of an Al-Mg-Si Alloy
Two-Step Aging Behaviour of Solution Treated A356 System Alloy
Cost-Effective Production of High-Property Titanium Alloy from Powder
Evaluation on Residual Stresses in Thick Titanium Welded Alloys
Yb: YAG Laser Welding of Aeronautical Alloys
Relationship between Microstructure and Mechanical Strength of Dental Semiprecious Alloys Subjected to Solution Treatment
Effect of Al Content on Microstructure and Properties of AlxMoNbTiV RCCA's Alloys
Microstructure and Crystallography of β Phase Formed through Electric Current Pulse (ECP) Treatment in Cold-Rolled Cu-40%Zn Alloy
Measurement of Thermal Expansion Coefficient of MgZnY Alloys with Synchronized Long-Period Stacking Ordered Phase
The Effect of Crystal Orientation on Damping Capacity in Rolled AZ31 Magnesium Alloy
Cold Swaging and Recrystallization Annealing of Ti-Nb-Ta-Zr-O Alloy - Microstructure, Texture and Microhardness Evolution
Al, Cu and Zr Addition to High Entropy Alloys: The Effect on Recrystallization Temperature
Effect of Si Content on the Fatigue Fracture Behavior of Wrought Al-xSi-0.7Mg Alloy
Laser Beam Welding of IN792 DS Superalloy
Natural Aging Behavior of Double-Sided MIG Welded A7N01-T5 Aluminum Alloy
Characterization and Modelling of the Precipitation Sequence of an Al-Mg-Si Alloy with Silicon Excess for the Prediction of the Mechanical Properties during Ageing
Microstructure and Mechanical Properties of a Cu-Pd-Ag Alloy Wire with Aging Treatment
The Relationship between Mg Content and Extra-Hardening in Ultrafine Grained Al-Mg Alloy by SPD
Effect of Aluminum Concentration on Damping Capacity during Annealing in AZ-Series Magnesium Alloy
Inhomogeneous Precipitation of the α-Phase in Ti15Mo Alloy Deformed by ECAP
Microstructure Evolution and Texture Formation Behavior during High-Temperature Deformation in M1 Magnesium Alloy
Effect of Voltage on Mg-Li-Al Alloy Anodic Oxide Film
Texture Formation Behaviour during High-Temperature Plane Strain Compression Deformation in AZ91 Magnesium Alloy
Influence of Cr Content on Cellular Precipitation Behaviour of Ni-38Cr-3.8Al Alloy with Lamellar Structure
Influence of Grain Size and Thermo-Mechanical Conditions on the Activation Energy for Super Plastic Flow in Ti-6Al-4V Alloy
Superplastic-Like Elongation by Transition of Deformation Mechanism from Grain Boundary Sliding to Solute Drag Creep in Fine-Grained Al-Mg Solid Solution Alloy
Spontaneous Microstructural Evolution and Magnetic Properties of Nano-Scale Particles Comprising Ferromagnetic Element Atoms in Cu-Ni-Fe and Cu-Ni-Co Alloys
Phase Stability and Mechanical Properties of Metastable Ti-X-Sn-Zr (x=Cr, Nb or Fe) Alloys
Synthesis and Characterization of Nanostructured Mechanical Cu-Fe-Co Alloy
Microstructure of Co-Cr-Fe-Mn-Ni-Cu and Co-Cr-Fe-Mn-Ni-Ag High Entropy Alloys with Liquid Phase Separation
Activities of Non-Basal Slips in Deformation of Magnesium Alloy Single and Poly Crystals
Study of Mechanical Degradation and Microstructural Characterization in a Ni-Based Superalloy Component of a Gas Turbine
Development of Low-Cost Titanium-Manganese Shape Memory Alloys
Fabrication of the Beta-Titanium Alloy Rods from a Mixture of Pure Metallic Element Powders via Selected Laser Melting
From Pre-Alloyed Rod to Gas-Atomized Powder and SPS Sintered Samples: How the Microstructure of an Nb Silicide Based Alloy Evolves
Forming Behaviour at Elevated Temperature of a Laser Heat-Treated AZ31 Magnesium Alloy Sheet
Ultra-Fine Grained Ti-15Mo Alloy Prepared by Powder Metallurgy
The Influence of Alloy Composition and Heat-Treatments on the Shape Memory Properties in a Cu-Sn-X Alloy
Residual Stress Analysis of A362 Aluminum Alloy Gear Case Using Neutron Diffraction
Behavior of Hydrogen in Tensile-Deformed Aluminum Alloys
Melting and Solidification Behavior of High-Strength Aluminum Alloy during Selective Laser Melting
Wide Scale Approach in Aluminium Alloys Microstructure Analyses from Component to Atom Scale in Order to Understand Behavior of New Alloys
Preparation of TiAl Intermetallic Alloy Precursor Using Slow Reaction Synthesis Process
Impact of Hydrogen Content on the Thermal Stability of Hydride Phases in Zirconium Alloys
Relationship between Microstructure and Magnetic Properties of Nano-Scale Particles Formed in Cu-Ni-(FeCo) Alloys
Study of Asymmetric Rolling to Improve Textures and r-Values of Aluminium Deep Drawing Alloys
A Subsurface Fatigue Crack Generation Model in near Alpha Titanium at Low Temperature
Dynamic Recrystallization during Warm Accumulative Asymmetric Roll Bonding (AARB) of the AA1050 Aluminium
Evolution of Young's Modulus of Cold-Deformed Pure Aluminium in a Tension Test
Numerical Analysis of Horizontal Twin-Roll Casting for Mg-AZ31
Effects of Mo Addition on Deformation Behavior of Metastable Beta-Type Ti-Mn Single Crystals
Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting
Deformation Behavior of Fe-Al Single Crystals Containing Fe2AlTi Precipitates
Transport and Thermodynamic Properties of CeRu2Al10 Controlled by Pressure at around Critical Pressure
Thermo-Mechanical Treatment of Titanium Based Layered Structures Fabricated by Blended Elemental Powder Metallurgy
Hot Deformation and Dynamic Recrystallization in Titanium Aluminide
Cryogenic Sheet Metal Forming - An Overview
Development of an Optimised Shielding Strategy for Laser Beam Welding of Ti6Al2Sn4Zr2Mo
Precipitation Kinetics of AA6082: An Experimental and Numerical Investigation
Microstructure and Texture of MX20 after Conventional Rolling and Rolling from Twin Rolled Cast Strip
Simulation of Thermal Phenomena in Reverse Strip-Rolling Process
Magnesium Twin-Roll Casting Technology for Flat and Long Products - State of the Art and Future
Microstructure Characterization of AlSi10Mg Fabricated by Selective Laser Melting Process
Microstructure Evolution of Ti-5Al-5V-5Mo-3Cr after Hot Deformation at Large and Moderate Strains
Material Flow in Lap Joint of Dissimilar Metallic Foils by Friction Stir Diffusion Bonding with Micro Indentation
Analytical Design of Superelastic Ring Springs for High Energy Dissipation
An In Situ Observation of Slip Deformation in a Compressed Ti-Mo-Al Single Crystal
Simultaneous Prediction of Bendability and Deep Drawability Based on Orientation Distribution Function for Polycrystalline Cubic Metal Sheets
Temperature Dependence of the Yield Stress in α-Titanium Investigated with Crystal Plasticity Analysis
Temperature Dependence of Mechanical Properties in Dual Phase Ti-6Al-4V
Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compositional and Microstructural Optimization
Strain Softening of Aluminum in Shear at Elevated Temperature
Micro-Scale Mechanical Behavior of Ultrafine-Grained Materials Processed by High-Pressure Torsion
Superplastic GBS Constitutive Equation Incorporating Average Grain Misorientation Dependence
Orientation Dependence on Fatigue Fracture Behavior of Pure Mg Single Crystals
Cube{100} Grains Nucleation during Annealing of S-Oriented Aluminum Single Crystal
Effect of Shearing Distance on Mechanical and Electrical Properties for Cu-11Mn-4Ni Thin Plate Formed by Compression Shearing Method at Room Temperature
Deformation Twinning and Change in Mechanical Properties of Cu-15at%Al in Multi-Pass Cold Rolling
Effects of Homogenization-Free on the Microstructures of an Al-Mg-Si-Cu Hot-Rolled Plate for Automotive Pannel
The Effect of Vibration Condition for Magnesium Dry Gravity Sorting by Vibrating Particulate Bed
Cold Spray Manufacturing for Structural Materials for High Field Magnet Production
Traveling Waves Induced by Sweeping Flows on Solidification Interfaces
Parameters Affecting Energy Absorption in Metal Foams
Explosion Welding: Process Evolution and Parameters Optimization
The Effect of Oxygen on the Phase Composition and Heat Treatment Behavior of Ti-V Alloys
Fabrication of Cu-Al-Ni Shape Memory Alloy by Selective Laser Melting Process
Selective Laser Melting of Inconel 718 under High Power and High Scanning Speed Conditions
In Situ Synchrotron Analysis of Twinning Stresses in an Aged Mg-4.5Zn Alloy
The Influence of Powder Particle and Grain Size on Parts Manufacturing by Powder Bed Fusion
Deformation Twinning Behavior in High Ni-Austenitic Materials
Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting
Micro-Alloyed Steel for Forgings
Ultrasonic Rheocasting for Refinement of Mg Alloys Reinforced with LPSO Phase
Microstructure and Properties of Cu-Cr-Zr-Ag Alloy
Synthesis of Cu-Ni-Al Shape Memory Alloy by Powder Metallurgy
Chapter 3: Coatings and Surface Engineering
Controlling Silver Ion Release from Ag-Based Nanocoatings by Plasma Surface Engineering
Stress Gradient Determination in Anti-Corrosion Multilayer Coating
Investigation of the Splat Deposition Behavior onto a Composite Coating in Cold Spray
Cladding of Stellite-6/WC Composites Coatings by Laser Metal Deposition
High Pressure Cryogenic Nitrogen Jet for Clean Coating Removal: Experimental Study of Polyamide Ablation
Study and Development of a Multilayered Coating to Improve Hard Metal Cutting Tools Performances
Superhydrophobic and Corrosion Protective Coating on Aluminium
Dry Surface Preparation Using Supercritical Cryogenic Nitrogen Jet Improves the Adhesion Strength of Cold Gas Sprayed Coatings (SCNCS)
Au-Ni and Rh Electroplated Coatings Evaluation for ITER Ion Cyclotron Resonance Heating Radio-Frequency Sliding Contacts
Response of Cold Sprayed Ti6Al4V Coatings to Solid Particle Erosion and Micro-Scratch Wear Processes
Oscillating Contact Wear in Cold Sprayed Ti6Al4V Coatings for Aeronautical Repairs
The Effect of Potential on Surface Characteristic and Corrosion Resistance of Commercial Pure Titanium Processed by Anodic Oxidation Treatment
Novel Methodology for the Selection, Dosing and On-Line Control of Corrosion Inhibitors for Industrial Acid Pickling
The Effect of Flue Gas Environment on the Corrosion Behavior of the Sulfuric Acid Dew-Point Corrosion Resistant Steel
Influence of Rolling Force on Corrosion Resistance of Interstitial-Free Auto Sheet Steel
An Experimental Method to Evaluate the Effect of Welding Residual Stress on Corrosion Fatigue Properties of Structural Steel in Synthetic Seawater
Mechanical Fields on Cross-Shaped Specimens for Stress Corrosion Cracking of Cold-Worked Austenitic Stainless Steels
Electrochemical-Based Characterization of the Corrosion Fatigue Behavior of Creep-Resistant Magnesium Alloys DieMag422 and AE42
The Influence of Ni Content on the Corrosion Resistance of Cu-Ni-Sn-C-P Sintered Alloys in Poor Quality Fuel
Relationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled Alloy
Hot Corrosion of Alloy 617 OCC in Simulated USC Power Plant Environment
Change of Intergranular Corrosion Behavior along the Thickness in a Friction-Stir-Welded 7N01-T5 Aluminum Alloy
Effect of Sn, Zn and Bi Addition on Corrosion Characteristics of Magnesium Alloys Sintered by Spark Plasma Sintering
Microstructure and Corrosion Behavior of Extruded Mg-Zn-Er Alloys
Cleaning Optimization of Hot-Dip Galvanized Steel Surfaces in Preparation for Paint Application
Improvement of the Surface Properties of Low Temperature Plasma Nitrocarburized Martensitic Precipitation-Hardening Stainless Steel by Aging Treatment
Effect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless Steel
Effects of Post-Drawing Surface Heat Treatments on the Strength and Torsional Ductility of High Strength Steel Wire
First-Principles Study of Chlorine Adsorption on Clean Aluminum Surface
Micro-Nanostructured Silicone Rubber Surfaces Using Compression Molding
Simple Fabrication of Superhydrophobic Surfaces Using Atmospheric-Pressure Plasma
Effects of Surface Treatment for A5052 Aluminum Alloy on Adhesiveness between A5052 Aluminum Alloy and Engineering Plastics
Effects of Surface Structure and Hydrogen on the Fatigue Strength of Electroless Nickel-Phosphorus Plated Al-2%Cu Alloy
Mechanical Property of Magnesium Alloy Surface with Dense Oxide
A Laser Shock Approach to Cold Spray
Effect of Interface Damage on Loosening Behavior of Acetabular Cup Subjected to Cyclic Loading
Amorphous Alumina Films Efficiently Protect Ti6242S against Oxidation and Allow Operation above 600 oC
Serial Production Applications and Application Development with Focus on Cold Spraying at Obz Innovation
Control Quality on Process of Laser Heat Treatment
Understanding Cold Spray for Enhanced Manufacturing Sustainability
Superhydrophobic Coating Bioinspired on Rice Leaf: A First Attempt to Enhance Erosion Resistance Properties at Environmental Conditions with Ceramic Particles
Corrosion Mechanisms of New Wrought Mg-Al Based Alloys Alloying with Mn, Zn and Sn
Coating Toughness Estimation through a Laser Shock Testing in Ni-Cr-B-Si-C Coatings
Cold Spray of Mixed Sn-Zn and Sn-Al Powders on Carbon Fiber Reinforced Polymers
Mass Transfer in Yb Silicate Environmental Barrier Coatings at High Temperatures
Chapter 4: Ceramics and Composites
Development and Properties of Cast TiAl Matrix In Situ Composites Reinforced with Carbide Particles
Elaboration of Architectured Copper Clad Aluminium Composites by a Multi-Step Drawing Process
Foaming and Compressive Properties of A359/SiCP Metal Matrix Composites
Competitive Reactions and Formation Mechanism of Microstructures in Mg/Cu Super-Laminate Composites during Initial Hydrogenation
On the Study of a TiB2 Nanoparticle Reinforced 7075Al Composite with High Tensile Strength and Unprecedented Ductility
Evaluation of Effective Thermal Conductivity of Metal Matrix Composites by Using Image-Based Calculation
Effect of Slit Shape on Joinability of Zircaloy - SiC/SiC Composite Tube Joint with Titanium Powder
Effect of Processing Route on Microstructure and Mechanical Properties of a Ti-3Al-2.5V/TiB Composite
Development of Tool Steel Matrix Composites with High Thermal Conductivity
Tensile Fracture of TiB Whisker Reinforced Ti Alloy Matrix Composites
Metallic Composites as Form-Stable Phase Change Alloys
Structural Stability of Hafnia-Based Materials at Ultra-High Temperature
Joining of AlN and Al with Compositional Graded Layer by Centrifugal Mixed-Powder Method
Tribological Properties of Aluminum and Silicon Borides at High Temperatures
Spark Plasma Sintering of High-Energy Ball-Milled ZrB2 and HfB2 Powders with 20vol% SiC
Multilayer and Fiber Metal Laminate Materials Hydro-Bulging
Rapid Synthesis of Li2O-(Nb/Ta)2O5-TiO2 Solid Solution Having Superstructure by Smart Processing Techniques
Texture and Mechanical Properties of IF Steel/Polyethylene/IF Steel Laminates
Copper Effect on Mechanical Properties of Al-CNF Composite Material Elaborated by Liquid Metallurgy with Induction Melting
Dislocation Densities in Dispersion-Strengthened Copper with Aluminum Oxide from X-Ray Line Profile Analysis
Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V
Control of Mechanical Properties of Functionally Graded Dual-Nanoparticle-Reinforced Composites
Development of Ultra-High Temperature Ceramics: From Monoliths to Composites
Wear Behavior of Cenosphere Dispersed Titanium Composite Foam Developed by Powder Metallurgy Route
Characteristics and Formation Mechanism of the Interface of Mg/Al Bimetallic Composites Prepared by Lost Foam Casting
Particle Distribution and Mechanical Properties of Nano-SiCP/Al-Cu Composites
Chapter 5: Electronics Industry. Materials and Processing Technologies
Investigation of Crack Initiation in Glass Substrate by Residual Stress Analysis
Effect of Cooling Rate on Intermetallic Compounds Formation in Sn-Ag-Cu-In Solder
Tensile and Fatigue Properties of Miniature Size Specimen of Sn-3.5Ag-0.5Cu-0.07Ni-0.01Ge Lead-Free Solder
A Study on Reliability of Pillar-Shaped Intermetallic Compounds Dispersed Lead-Free Solder Joint
Effects of Sputtering Pressure on (ZnO)x(InN)1-x Crystal Film Growth at 450oC
Photoluminescence of (ZnO)0.82(InN)0.18 Films: Incident Light Angle Dependence
Cross-Correlation Analysis of Fluctuations of Interactions between Nanoparticles and Low Pressure Reactive Plasmas
Differences in Morphologies of GaN-Based Nanocrystals Grown on Metal-Foils and Multi-Crystalline Si Substrates
Internal Stress Evaluation on SiC Dices after SLID Process
Electron Diffusion Length and Charge Separation Efficiency in Nanostructured Ternary Metal Vanadate Photoelectrodes
Chapter 6: Additive Manufacturing. Materials and Technologies
Towards Additive Manufacturing: Pumping Flow Rate with Time-Dependent Material Rheology in 3D Cementitious Material Printing
Additive Manufacturing of Titanium Parts Using 3D Plasma Metal Deposition
One Photon 3D Polymerization via Direct Laser Writing
Significant Benefits of 3D Screen Printing for Manufacturing Micro-Channel Heat Exchangers
Design of Additively Manufactured Lattice Structures for Tissue Regeneration
Heat Treatment Behavior of the 18Ni300 Maraging Steel Additively Manufactured by Selective Laser Melting
Compositional Optimization of In718 Superalloy Powder for Additive Manufacturing
Additive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray Deposition
Direct Laser Additive Manufacturing of Ceramics by Powder Deposition
Fabrication and Tailoring Interface Structure of Diamond/Al(and Al12Si) Composites for Heat Sink Applications by Vacuum Hot Pressing and Selective Laser Melting
Developing New Materials for Electron Beam Melting: Experiences and Challenges
Three Dimensional Smart Processing by Ultra Violet Laser Lithography of Ceramic Additive Manufacturing
Chapter 7: Chemical Production. Materials and Technologies
Hydrogen Release from Oxidized Titanium Hydride
Increasing the Electrical Conductivity of Layered Double Hydroxides by Intercalation of Ionic Liquids
Nickel Supported Modified Ceria Zirconia Lanthanum/ Praseodymium/Yttrium Oxides Catalysts for Syngas Production through Dry Methane Reforming
Engineering Solutions in Scale-Up and Tank Design for Metal Hydrides
The Influence of Gas Diffusion Media Morphology on Hydrogen Fuel Cell Performance
Superhydrophobic and Highly Oleophilic Polystyrene Fibers (PS) with Delayed Freezing Time and Effective Oil Adsorption
New Sustainable Hybrid Porous Materials for Air Particulate Matter Trapping
Synthesis of Fluorescent Ag Nanoclusters for Sensing and Imaging Applications
Polymer Interphases in Adhesively Bonded Joints - Origin, Properties and Methods for Characterization
Chapter 8: Theoretical Analysis and Numerical Simulation of Properties and Behavior of Materials
A Theoretical Analysis of the Rheological Parameters Associated with DDRX
The Avrami Kinetics of Dynamic Recrystallization in Nickel-Niobium Alloys
Forensic Analyses of Stress-Strain Diagrams to Evaluate Contributions from Microstructure
A Numerical Thermal Analysis of the Heating Process of Large Size Forged Ingots
Prediction of Steel Transformation Temperatures Using Thermodynamic Modeling and Design of Experiments (DOE)
Multiscale Approach for the Modeling of Chemo-Magneto-Thermo-Mechanical Couplings - Reversible Framework
Energy of Small Angle Tilt Boundary in Al
Structural, Electronic and Mechanical Properties of Perovskite Oxides LaMO3 (M = Mn, Ni) Compounds in the High and Low Symmetric Phases by First Principle Calculation
Mastering of the Filling Stage in Low Pressure Sand Casting Process
Use of a Zener Approximation for Heat Transfer Analyses of Quasi One-Dimensional Welding Problems
Ductility and Stability in Metallic Materials
Hot Forming Optimization of ZK30 Magnesium Alloy
Evaluation of a Characteristic Temperature in the Relaxation of Metallic Glass Forming Liquids
Development of an Anti-Trapping Current for Phase Field Models Using Arbitrary CALPHAD Thermodynamics
On the Challenges and Prospects of the Superplastic Forming Process
A First-Principles Study of the Al (001)/Fe(0-11) Interface
Metaheuristic Ab Initio Optimum Search for Doping Effects in Nanocarbons
3D FEM Simulation of the Effect of Cooling Rate on SDAS and Macrosegregation of a High Strength Steel
Chapter 9: Technological Tools and Measurements
Wear Behaviour of Two Different Cemented Carbide Grades in Turning 316 L Stainless Steel
Study on the Statistical Errors in X-Ray Stress Measurement with Two-Dimensional Detector
Evaluation of Railway Rails Suffered from Rolling Contact Fatigue Using X-Ray Generalized cosα Method
Portable System for the Measure of Efficiency in Arc Welding Processes
Proving the Preclusion of Data Manipulation Using Parallel Data Acquisition in Chromatography
SteBLife - The Enhanced Short-Time Evaluation Procedure for Materials Fatigue Data Generation
Microstructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction Techniques
Study of Consistency between Two-Dimensional, sin2ψ, cosα and Fourier Transformation Methods for X-Ray Residual Stress Measurement by Debye Ring Simulation
Recycle Processor for Commercial Aircraft Wing Trimmings
Strength and Axial Behavior of Cellular Lightweight Concrete-Filled Steel Rectangular Tube Columns under Axial Compression
Implementation and Use of a Laser-Ultrasonic System in a Deformation- and Quenching Dilatometer
Quality Assessment of Friction Stir Welded Joints - Using the Fundamental Anti-Symmetric Lamb Wave Mode
Chapter 10: Biomaterials and Biomedical Technologies
Validation of Material Parameters of Collagen Compositions for the Application as a Bioink
Improved Syringe Extruder for Improved Processing of Biological Materials
Fabrication and Validation by Micromilling for Bioreactor Prototyping
Analyte Tracking for Novel Bio-Applications
Mechanical Performance of Titanium Alloys with Added Lightweight Interstitial Element for Biomedical Applications
Microstructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta Alloy
Manufacturing of Biomedical Ti-Based Alloys with High Oxygen Content and Various Amount of Beta-Stabilizing Elements
The Improvement of Durability of Biodegradable Magnesium Alloy by Using Bio-Inspired Coating
Biofunctionalization of Ceramic Implant Surfaces to Improve their Bone Ingrowth Behavior
Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys
Tissue Engineering Strategies to Promote Bone Repair
Online Glucose Measurement in DMEM for In Vitro Cell Culture
Control of Cell Adhesion on Titanium Dioxide by Light Irradiation
Monitoring of Cytotoxic Induced Cellular Displacements by Utilizing Electronic Speckle Pattern Interferometry
Sample Analysis for Novel Medical Applications
Development of a Smartphone Based Reader for the Quantitative Analysis of Lateral Flow Assays
Oxidative Plasma Treatment of Fluorocarbon Surfaces for Blood-Contacting Applications
