- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This book contains the papers presented at the Tenth International Conference on High-Performance Ceramics (CICC-10), which was held from November 4 to 7, 2017, in Nanchang, China. The Collection covers most aspects in the field of high-performance ceramics (advanced ceramics), including processing, microstructures, and properties of structural and functional ceramics. Especially, the papers gave an overview of the most recent development in high-performance ceramics in China.
Contents
Preface
Chapter 1: Powder Synthesis and Characterization
Influence of Sulfate Ion on Phase and Dispersion of Y3Al5O12 Nanopowders with the Co-Crystallization Method
Effect of Ammonia on CeO2 Microspheres Prepared by Internal Gelation Process
Research on the Densification Process of the Mechanically-Alloyed Amorphous 2Si-B-3C-N Powder
Preparation and Characterization of SiC Nanoparticles for ATF-FCM
Fabrication and Characterization of Li4SiO4 Ceramic Pebbles Doped with Y2O3 and Nb2O5
Oxidation Behavior of β-Sialon Ultrafine Powders Prepared by the Combined Sol-Gel and Microwave Carbothermal Reduction Nitridation Method
Effect of the Synthesis Method on the Properties of Ultrafine YAG Powder
Effect of Synthetic Technology on the Properties of Co2O3 Powder
Preparation of Zirconium Sol by Precipitation Method
Preparation of Al2O3-SiC Composite Powder by Carbothermal Reduction of Coal Gangue and its Influence on Properties of Blast Furnace Stemming
Preparation of Spherical Silica with Controllable Size
Fabricating Uniform Tetragonal Barium Titanate Nanocrystals via Sand Milling Assisted by an Innovative Two-Step Calcination
The Microstructure and Growth Behavior of Bi2Fe4O9 Superfine Particles Synthesized by Hydrothermal Method
Preparation of β"-Alumina with η Type Nanometer Alumina Powder via Solid Phase Synthesis
Chapter 2: Oxide Ceramics and Composites for Structural Applications
The Effect of Dispersion Method on the Mechanical Properties of Graphene Reinforced Alumina Composites
Effect of WO3 on the Performances of Cordierite Ceramics Synthesized by Using Kyanite as Raw Materials
Improvement of Thermal Stability of ZrO2-SiO2 Aerogel Modified by Ca(II) Cations
The In Situ Preparation of MgAl2O4/YAG Eutectic Composites by Reaction Sintering Using Induction Heating
Corrosion of MgAl2O4 Spinel with Different Al2O3 Contents in Iron-Containing Gasifier Slag
Fabrication of MgO/Graphene Composites by Combustion Synthesis and Spark Plasma Sintering
Preparation and Properties of Phase Change Thermal Insulation Materials
Rheological Behaviors of Calcium Aluminate Cement-Hydratable Alumina Bonded Corundum-Spinel Castables Suspensions with Different Dispersants
Potash Erosion Resistance of Chromium-Containing Materials
Preparation of Lightweight Mullite-Anorthite Refractories by Different Routes
Light Burning Condition of Preparing Dolomite Clinker Using Natural Dolomite
Crystallization and Optical Properties of Sr3Al2O6-SrAl2O4 Eutectic Glass
Thermal Expansion of SrZr4-xTix(PO4)6 Ceramics
The Mechanical Properties and Thermal Resistance of Fly Ash Geopolymer Foams
Thermal Resistance of Fly Ash Geopolymers with Alumina as Additive
Preparation and Characterization of 3Y-ZrO2 Composite Ceramics
The Effects of Carbon Content on ZrCO Microspheres Prepared by Internal Gelation Process with Carbon Black
Toughened Laminated Alumina/Silica Ceramics Formed by Weakening Interlayer Bonded Strength
Preparation and Properties of Cf/Mullite Composites by PIP
Effect of Nano-Al2O3 Particles Addition on Thermal Shock Resistance of ZTA/Cordierite Composites
Effect of SiCp Addition on Microstructure and Mechanical Properties of ZTA Ceramics by Microwave Sintering
Effect of Sintering Temperature on Properties of YAG Porous Ceramics via Atmospheric Sintering Method
The Influences of Addition of MgCO3 on the Properties of the Magnesia Prepared Using Magnesite
Effect of Silicon Addition on the Properties of Carbon Fiber Reinforced Mullite Based Castable Composites
Fabrication of Porous Mullite Ceramics with Different Phase of Alumina for Insulation Materials
Effect of Micro-Sized Alumina Powder on the Hydration Process of Calcium Aluminate Cement
Mechanical and Thermal Properties of MgAl2O4-Y3Al5O12 Ceramic Composites
Sintering and Crystallization of Al2O3-La2O3-ZrO2 Eutectic Glass
Preparation and Performances of Geopolymer-Based Plant Fiber Composites
Research on the Performance of Carbon Fiber Reinforced Inorganic Polymer Composite
Molten Salt Synthesis and Formation Mechanism of Plate-Like MgAl2O4 Spinel
Cryomilling and Characterization of Ti/Al2O3 Powders
Densification Technique of Al2O3/Al Metal Ceramics Using Powder Metallurgy Method
Effect of Sintering Aids Sorts on Properties of Prepared Al2O3-Al Cermet
Effect of Molding Processing on Properties of Al2O3-Al Cermet Prepared via Powder Metallurgy Method
Chapter 3: Non-Oxide Ceramics and Composites for Structural Applications
Low-Temperature Sintering of Porous Silicon Carbide Ceramics with H3PO4 as an Additive
Co-Catalyzed Si3N4/Sialon Nanofibers Reinforced SiC Refractories
A Mechanically-Alloyed Amorphous 2Si-B-3C-N Ceramic with a Crystallization Temperature up to 1800oC
Characterization of Fiber-Like SiCN Formed during the Nitridation of Silicon
Characterization of Cf/SiC Composite Fiber Bundle Surface Based on an Optical System
Joining SiC Ceramics with Ti3SiC2/TixCy Multi-Interlayer by Spark Plasma Sintering
Modification of the Fiber-Matrix Interface in the Carbon Fiber Reinforced ZrB2- Based Ultra-High Temperature Ceramic Composites
Polymer-Derived Nano-Sized SiC-Containing ZrB2 Composites: Densification, Microstructure and Flexural Strength
Preparation and Ablation Performance of BN Fiber Fabrics Reinforced Nitrides Composites
The Microstructure and Shear Properties of SiC/SiC Composite Pins with Designed SiC Fiber Preform
The Matrix Cracking Stress and Residual Thermal Stress of 2D SiC/SiC Composite Fabricated by PIP Process
Synthesis of the ZrB2-SiC Ceramic from Polymeric Precursor Pyrolysis
Thermal Expansion of Ca1-xSrxZr4(PO4)6 Ceramics
Quartz Fibers Reinforced SiNB Ceramic Matrix Composites Prepared by PIP
Preparation and Performance of C/C-SiC Ceramic Matrix Composites
Influence of Carbon Fiber Treatment on Flexural Properties of C/SiC Composites
Spark Plasma Sintering and Characterization of Mixed h-BN Powders with Different Grain Sizes
Influence of Technological Conditions on the Properties of PcBN Composites Fabricated by Spark Plasma Sintering
Study on the Microstructure and the Machining Performance of Ti3SiC2-TiB2- TiC Composite Ceramic
The Preparation of Cf/ SiC-ZrC Composite Material by Adding SiC and ZrC Powders in Organic Precursors
Processing and Properties of (Zr,Hf)B2-SiC Ceramic Composites
Isothermal Oxidation Resistance of Zr3[Al(Si)]4C6-Based Composite Ceramics at 1000-1300oC in Air
Preparation and Properties of NZP Family Ceramics
Fabrication of Dense Silica Ceramics through a Stereo Lithography-Based Additive Manufacturing
Chapter 4: Coatings and Films
Preparation of Dense Al2O3 Film on 8YSZ Coating by Sol-Gel Method
Thermal Shock Resistance of Yb2SiO5/Si and Yb2Si2O7/Si Coatings Deposited on C/SiC Composites
Stress Evolution and Element Diffusion in Bi-Layered Yb2SiO5/ Mullite Environmental Barrier Coatings under High-Temperature Molten Salt Corrosion
Study of Glass-Ceramic Coating on the SUS430 Stainless Steel Plate with High Temperature Oxidation Resistance
Thermal Shock Behavior and Bonding Strength of MoSi2-BaO-Al2O3-SiO2 Gradient Porous Coating with Polymethyl Methacrylate Addition for Porous Fibrous Insulations
Synthesis of Boron Nitride Coating on Graphene
Deposition and Electrical Resistivity of Oxygen-Deficient Tin Oxide Films Prepared by RF Magnetron Sputtering at Different Powers
The Impedance Spectroscopy Study of the Oxides Layer in Thermal Barrier Coatings
Ablation Behaviors of ZrC-20vol.%MoSi2 Composite Coating under Different Heat Fluxes
Oxidation Resistance of ZrB2-SiC-WSi2 Coating Prepared by Vacuum Plasma Spraying
Preparation of YAM Coating on the ZrB2 Composites and their Ablation Resistance
Effects of Bias Voltage on Microstructure, Hardness and Bonding Strength of TiN Coating Deposited by High Power Pulsed Magnetron Sputtering
Tribological Performances of CrSiN Coatings Deposited by High Power Pulse Magnetron Sputtering
Oxidation Behavior of Cr1-xAlxN Coatings Deposited by Closed Field Unbalanced Magnetron Sputtering at 800oC
Microstructure and Erosion Properties of HVOF Sprayed Cermet Coatings via Different Feedstock Powders
Bonding Strength and Thermal Insulation Property of Thermal Barrier Coating with Nanometer Alumina Coated Zirconia
Enhanced Bioactivity of Chemically Oxidization-Modified Titanium Alloys
Fabrication and Growth Mechanism of Nanoleaf Sodium Titanate Coating on High-Purity Titanium Surface
Chapter 5: Dielectric and Piezoelectric Ceramics
Preparation and Characterization of PrAlO3-Doped 0.95MgTiO3-0.05CaTiO3 Microwave Dielectric Ceramics
Structural Evolution and Microwave Dielectric Properties of Ba(Co1/3(Nb1-xW5x/6)2/3)O3 Ceramics
Preparation, Performances and Reaction Process of NiZrNb2O8 Microwave Dielectric Ceramics
Polarity Effect and Dielectric Breakdown of Composite Ferroelectric Films as the Dielectric for Electrowetting Systems
Using Superhydrophobic SU-8 Film as the Dielectric for Electrowetting-on-Dielectric
Preparation of Low Dielectric Constant Porous Silicon Nitride Ceramics for Radome Application
BaTiO3/ Teflon Nanocomposite Ferroelectric Thin Films for Low Voltage Electrowetting Systems
Topochemical Synthesis of High-Aspect-Ratio Lead-Free (K, Na)NbO3 Plate-Like Structures
High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere
Effect of Sintering Process on Microstructures and Dielectric Properties of Nb-Doped BaTiO3-(Bi0.5Na0.5)TiO3 Ceramics for X9R MLCC Applications
Dielectric Breakdown Strength and Microwave Dielectric Properties of Alumina Ceramics with CaO-SiO2- MgO, Yb2O3 and ZrO2 Additives
Preparation and Properties of Si3N4-BaTiO3 Composite Ceramics
Chapter 6: Transparent Ceramics and Luminescent Materials
Calculation of Pore Scattering in Transparent Ceramics
Fabrication of High Dense ZnSe Ceramic by Spark Plasma Sintering: The Effect of the Powder Process Method
The Effects of Halogen Exchange on the Structural Features, Thermal Behavior and Photoluminescence of Y/Eu Layered Rare-Earth Hydroxide (LRH) Nanosheets
Influence of Annealing Atmosphere on Microstructure and Optical Properties of ZnO Thin Films
A Facile Co-Precipitation Synthesis and Luminescence Properties of Red-Emitting La2O2SO4: x%Eu3+ Nanophosphors
Energy Transfer and Spectroscopic Characterization of New Green Emitting Li3Ba2Gd3(WO4)8:Tb3+ Phosphor
Preparation and Characterization of Na2O-Y2O3-P2O5-SiO2 Transparent Glass Ceramics
Influence of Synthesis Temperature on the Properties of SnO2 Thin Films via Hydrothermal Precipitation Method
Effect of the Adjuvants on the Properties of Superfine SnO2 Powders
Transparent Ultraviolet Photodetectors Based on Ga2O3 Electrospun Nanowires
Effect of L-Cysteine on Photoluminescence of Zns:F Quantum Dots
Preparation and Properties of Cr,Nd:YAG Transparent Ceramics by Slip Casting
A Comparative Study of Relative Translucency of Six All-Ceramic Restorations
Synthesis and Property Investigation on the Spherical Lu3Al5O12:Tb3+ Phosphor with Green Emitting
Chapter 7: Materials for Energy and Environmental Applications
Effect of Rare Earth Doping on Electrochemical Properties of Fe2O3 Nanoparticle for Supercapacitor
Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering
Preparation and Property of LSGM-Carbonate Composite Electrolyte for Low Temperature Solid Oxide Fuel Cell
Enhanced Ionic Conductivity in Ce0.8Gd0.2O2-δ Nanofiber: Effect of the Crystallite Size
Electronic Structure and Transport Properties of La2Zr2O7 Pyrochlore from First Principles
On the Sol-Gel Synthesis and Structure, Electronic and Ionic Conductivities and Impedance Behavior of Y, Fe Co-Doped SrTiO3 Mixed Conductor
Effects of Prilling Process on the Microstructures and Electrical Properties of Lanthanum Chromite Ceramics
Design and Simulation of a Novel Thermoelectric Micro-Device with Electrodeposited Bi-Te Alloys
Preparation and Lithium Storage Performances of Porous Co3O4 Nanorods
Hydrothermal Synthesis of Fe3O4@C Spheres as Anode Material for Lithium-Ion Batteries
Fabrication of Graphitic Carbon Spheres via a Hydrothermal Carbonization Combined Catalytic Graphitization Method Using Cobalt as Catalysts
Effect of pH on the Properties of BiVO4 by Hydrothermal Synthesis Method
Synthesis and Characterization of Novel Multipods-Branched Cd-Se-S Micro-/Nano-Structures
Enhanced Photocatalytic Activity of Cu1.8Se/CuAgSe for Organic Pollutants under Visible and Near-Infrared Light
Effect of Anionic Surfactant on Adsorption Properties of Nano Calcium Carbonate
Zn-Cr Layered Double Hydroxides Composites for Methyl Orange (MO) Absorption
The Synthesis and Application of the Hollow Mesoporous SiO2/ Dense SiO2/Fe3O4 Composite Particles
Synthesis and Photocatalytic Degradation Performance of g-C3N4/ CoAPO-5/rGO Ternary Composite
A Facile Synthesis of NiFe2O4 with High Specific Capacitance as Supercapacitor Electrode Material
Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application
Preparation and Optical Properties of ZnO Nanocrystals by Chemical Bath Deposition
Hydrothermal Method Preparation of Flower-Like Ce-Doped ZnO as an Efficient Photocatalyst
The Synthesis, Characterization and Visible-Light Photodegradation Performance of Graphitic Carbon Nitride Coupling with CoAPO-5
Chapter 8: Ceramics-Related Materials
P-Type Molecular Sieve Antibacterial Agent and Hydrothermal Control
Growth of Highly (110) Oriented Diamond Film by Microwave Plasma Chemical Vapor Deposition
The Tribological Properties of Water Lubricated Ceramics with Silica Nanoparticle Additives
Investigation on Magnetoviscous Effects of Water-Based Magnetic Fluid
Preparation and Performance of Zirconia Fiber Board
Computer Modeling of Ceramics Sintering: Effects of Inhomogeneity on Sintering Kinetics
The Study of Heating Mode of an Expansion Insulation Material
Effect of Alkali Activator on Preparation, and Mechanical and Thermal Properties of Iron Mine Tailing-Based Lightweight Materials
Temperature Field Simulation of TC4/SiC Bilayer in Laser Forming
Mechanism and Technics to Produce Geographical Indication Products of Chinese Blue-and-White Porcelain
Effect of B4C and SiO2 on Bond Property for Phenolic Resin-Based Adhesive
