- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
This collection of peer-reviewed papers by results of 15th International Conference on Aluminium Alloys (ICAA15, 12-16 June, 2016 in Chongqing, China) that are cover most aspects of aluminium alloys, including casting and solidification; phase transformations; thermo-mechanical processing; metal plasticity and forming; strength, fracture and fatigue; advanced atomic-scale characterization; corrosion and surface properties; novel processes and alloy design; modelling and numerical simulation.
Contents
Preface, Committees, Sponsors
Chapter 1: Casting and Solidification
Fabrication of Cladding Billet in Diameter of 160mm/148mm by Direct Chill Casting Process
Microstructural and Mechanical Characteristics of Cladding Billets with Different Clad Ratios
Effect of Direct Chill Casting Speed and Heat Treatment on Microstructure and Mechanical Properties of Al-13.9%Mg2Si Composite
Effect of Cooling Rate on Modification and Grain Refinement of 4032 Aluminum Alloy
Effect of Compound Modification and Cooling Rate on Microstructure and Mechanical Properties of Al-25%Si Alloy
Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys
Microstructure and Mechanical Properties of Semi-Solid Die-Cast A356 Aluminum Alloy
6000 Series Aluminium Alloy Strip Casting Using a Vertical Type Twin Roll Caster
Microstructural Evolution of Al-Mn Based Alloy Fabricated by Vertical-Type High-Speed Twin-Roll Casting
Application of Vertical-Type High-Speed Twin-Roll Casting for Up-Grade Recycling and Clad Sheets Fabrication of Aluminum Alloys
Study on Thermal Physical Properties of Al-Si8-Cu2-Mg Alloy
Improving the Corrosion Resistance of Hot-Working Mold Steel against Al Alloy Melt by Coating
Supersaturation Behavior of Al Solid Solutions and its Effect on Tensile Property in Al-7Si-xMg Alloys during Solution Heat Treatment (x: 0.4 and 0.8 Mass%)
Evaluation on the Accuracies of Sump Depth Measurements during DC Casting Process of 7050 Alloy
Effect of Electromagnetic Field on the Macrosegregation Behaviour of Al-Cu Alloy Ingot Prepared with Direct-Chill Casting Process
Tensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature
Study on Eutectic Microstructure and Modification Mechanism of Al-Si Alloys
Grain Refinement in an Al-Zn-Mg-Cu Casting Ingot
Effects of Si Addition on the Microstructure and Tensile Property of Al-xMg Alloys with Al2Ca during Heat Treatment (x: 5 and 7 Mass%)
Research of Preparing Parameters in the Complex Process on Microstructure in Semisolid A356 Alloy Slurry with Micro-Addition of La
Effects of Ti Powder Additions in Melt-SHS Process on the Performance of Al-Ti-B Grain Refiner Alloys
Influence of Die Casting Temperature and T1 Treatment on the Microstructure and Properties of the Alsicumg Alloy
Investigation of Phosphorus-Containing Compounds in Aluminium Alloys with Emphasis on the Formation Mechanism
Chapter 2: Phase Transformations
Effects of Si Content on the Tensile Strength and Machinability of Al-Mg-Si-Cu-Mn-Cr Alloys
Detection of Quench Induced Precipitation in Al Alloys by Dilatometry
Effects of Homogenization Treatment on Dispersoid Characteristics and Recrystallization Behavior in an Al-Zn-Mg-Cu-Zr Alloy
Stress Induced Precipitation during Quenching of Aluminium Alloys
The Effects of Ni Content and Intermediate Annealing Condition on Recrystallization of Al-Fe-Ni-Si Alloy Fin Stocks
Effects of Mn and Cr Additions on the Recrystallization Behavior of Al-Mg-Si-Cu Alloys
Role of Pre-Deformation on Aging Precipitation Behavior of Al-Cu-Li Alloys
The Effect of Cryorolling on the Microstructure of Al-Cu-Mg Alloy
Influence of Wiper Height on 7A55 Slabs
Quantitative Measurement of Strain Field around η' Phase in a 7000 Series Aluminum Alloy
The Influence of Extended and Variable Pre-Stretching on the Strength of AA2195 Alloy Taper-Rolled Plates
New Progress on Er-Containing Micro-Alloying Aluminum Alloys
Recent Advances in Research and Industrial Technologies for Aluminum Alloys in Japan
Apparent Morphology and Structure of Iron-Rich Phase in Aluminum Alloy
A Combined TEM and Atom Probe Approach to Analyse the Early Stages of Age Hardening in AA 6016
Effect of the Deformation Parameters on the Microstructure of TiC-Al2O3P/Al Composites
APT Investigation of Effect of Minor Zr on Precipitation Strength of Al-Sc Alloy
Abnormal Effects of Temperature and Strain Rate on the Ductility of a Carbon Nanotubes Reinforced Al Alloy Composite
Quantitative Phase Analysis of Aluminium-Lithium Alloys
Effect of Annealing Conditions on Recrystallization of AA5182 Sheet
Chapter 3: Thermo-Mechanical Processing
Effect of Novel Thermomechanical Treatment on Microstructure and Properties of 6156 Alloy
Effects of Mn and Zr Addition in 6000 Series Aluminum Alloys on the Formation of Stabilized Substructures during Hot Deformation
Phase Composition, Texture and Mechanical Properties of 80 mm Plates of Al-2.8Cu-1.7Li-0.5Mg-0.5Zn-0.1Zr-0.06Sc Alloy
Effects of Homogenization Conditions on the Microstructures of Twin-Roll Cast Foil Stock of AA8021 Aluminum Alloy
Effect of Solution Treatment on the Properties and Microstructural Evolution of Al-Zn-Mg-Cu-Er-Zr Alloy
Combined Effect of Cold-Rolling and Aging on Precipitation and Recrystallization Behavior of Al-Er-Zr Alloy
Effect of Natural Aging of 6xxx Series Extrusions on the Energy Absorbance Capacity
The Effect of Heating Rate on the Density and Spatial Distribution of Dispersoids during Homogenisation of 6xxx Aluminium Alloys
Grain Growth Behavior of AlMg5 Alloy Fabricated by Using a New Mg Mother Alloy Containing Al2Ca during Homogenization and Hot Compression
Effects of Mg and Mn Contents on Hot-Rolling Temperature and Resultant Tensile Properties of Al-Mg-Mn Alloys
Study of Hot Deformation Behavior of 6082 Aluminum Alloy
Study on the Ageing Process of the 6xxx Series Aluminum Alloy Wires for Overhead Conductors
Study of Texture in 6016 Aluminum Alloy during Processing
Chapter 4: Metal Plasticity and Forming
Friction-Stir Welding of Zr-Modified AA5083 Sheets in Different Conditions
Effect of Forging Temperature on Deformability and Structure Evolution of High Purity Aluminium during Multi-Directional Forging Process
A Study on the Deformation Dehaviours of Al-1.4Fe-0.2Mn Alloy Sheets
Micro Structural Changes in Welded AlCuLi-Alloys by Positron Annihilation Spectroscopy, SAXS and DSC
Study on the Formability of Aluminium Alloy Sheets at Room and Elevated Temperatures
Precipitation Behaviour and Mechanical Properties during Short-Term Heat Treatment for Tailor Heat Treated Profiles (THTP) of Aluminium Alloy 6060 T4
Chapter 5: Strength, Fracture and Fatigue
Effect of Dispersoids on Long-Term Stable Electrical Aluminium Connections
Correlation between Fracture Toughness and Quantitative Characterization of Microstructure in 7055 Aluminium Alloy
Effect of Microstructure on Impact Energy of an Al-Mg-Sc Alloy
Quantification of Fatigue Weaklinks in High Strength Al Alloys
Chapter 6: Advanced Atomic-Scale Characterization
Microstructure and Mechanical Properties of 6013 Aluminium Alloy Processed by a Combination of ECAP and Preaging Treatment
Characterization of Intergranular Corrosion Defects in a 2024 T351 Aluminium Alloy
Partial Melting, Segregation Behavior and Nanomechanical Properties of AlCu2Si1Mg0.6 Alloy
Effects of Sn Addition on Clustering and Age-Hardening Behavior in a Pre-Aged Al-Mg-Si Alloy
Directionality and Column Arrangement Principles of Precipitates in Al-Mg-Si-(Cu) and Al-Mg-Cu Linked to Line Defect in Al
The Study of Ingots and Deformed Semi-Finished Products of Al-Mg-Sc and Al-Cu-Li Alloys Using Diffraction Methods
Chapter 7: Corrosion and Surface Properties
Characterization of Roping on AA6xxx Alloy Sheet by Numerical Analysis for Surface Topography
Corrosion of Aluminium Aerospace Alloys
Intergranular Corrosion Mechanism of Brazed Al-Mn-Cu-Si Alloy
Optimization for Anodizing Conditions of 5A06 Aluminum Alloy Based on Doehlert Design Matrix Method
Response of Microstructure in High Strength Aluminium Alloy to Graff Sargent Etchant
The Effect of Mg Content on Intergranular Corrosion of Al-Mg-Mn Alloys after Annealing
About the Role of Hydrogen in Stress Corrosion Cracking of a 7xxx Aluminium Alloy (Al-Zn-Mg)
Corrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution
Computational Simulation of Localised Corrosion in Anodised AA 2099-T8 Aluminium-Lithium Alloy
Effect of Heat Treatments on Stress Corrosion Behavior of 7050 Al Alloys in 3.5% NaCl Solution
Refinement of Primary Silicon Crystals by Novel P-Doped γ-Al2O3 Particles in Solidification of Hypereutectic Al-Si Alloys
Chapter 8: Novel Processes and Alloy Design
Similar and Dissimilar Ultrasonic Spot Welding of 5754 Aluminum Alloy for Automotive Applications
Study of an Accelerated Aging Process for Conductive Aluminum Alloys
Processing Map and Microstructural Evolution of Isothermal Compressed an Al-Mg-Si-Cu-Zn Alloy
Precipitation of ScAl3 Phase during Solutionizing and Ageing of Hypoeutectic Al-Sc Alloys and its Impact to Mechanical Properties
Effect of Homogenizing Treatment on Microstructure and Property of Al-Zn-Mg-Cu-Zr Aluminum Alloy
Effect of Zn, Mg, Cu, Zr on Microstructure and Properties of Laser Welding Aluminium Alloy
Development of TiB2 Dispersed Aluminum Composites by Spark Plasma Sintering
Effect of Solution Treatment on Microstructure and Mechanical Properties in an Al-9.3Zn-2.0Mg-1.8Cu Alloy
Preliminary Investigation into the Suitability of 2xxx Alloys for Wire-Arc Additive Manufacturing
Cold Stamping of 6061 Al Alloy Assisted by Arc Welding Pretreatment
A Novel Methodology for Optimization of Properties, Costs and Sustainability of Aluminium Extrusions
Chapter 9: Modelling and Simulation
Study on the Improving Method of Needle-Like β-Fe Phase in Al-Si-Cu Casting Alloy for Engine Cylinder Head
Modelling of the Age-Hardening Behavior in AA6xxx within a Through-Process Modelling Framework
Effects of Heat Transfer Coefficients on Quenching Residual Stresses in 7055 Aluminum Alloy
Numerical Analysis of Wavy Interface Formation and Successive Temperature Change in Magnetic Pulse Welded Al/Cu Joint
Modelling of Strain-Path Transients in Commercially Pure Aluminium
Optimized Design of Aluminum Cross Car Beam (CCB) Based in Modal Strain Energy Analysis
Characterization and Modelling of the Damage Behavior of Extruded Aluminum Profiles for Crash Simulations
Multiscale Approach for the Damage Modeling of an Aluminum Casting Alloy with Stochastic Character
Rolling Texture Simulation of Aluminium Sheets Based on the Mechanism of Intergranule Reaction Stresses
Effect of Natural Ageing on Strength and Anisotropy in Aluminium Alloy AA 6005C
