Methodology for Biomimetic Design of Additively Manufactured Structural Components (Light Engineering für die Praxis)

個数:

Methodology for Biomimetic Design of Additively Manufactured Structural Components (Light Engineering für die Praxis)

  • 提携先の海外書籍取次会社に在庫がございます。通常3週間で発送いたします。
    【重要ご説明事項】
    1. 納期遅延や、ご入手不能となる場合が若干ございます。
    2. 複数冊ご注文の場合は、ご注文数量が揃ってからまとめて発送いたします。
    3. 美品のご指定は承りかねます。

    ●3Dセキュア導入とクレジットカードによるお支払いについて
  • 【入荷遅延について】
    世界情勢の影響により、海外からお取り寄せとなる洋書・洋古書の入荷が、表示している標準的な納期よりも遅延する場合がございます。
    おそれいりますが、あらかじめご了承くださいますようお願い申し上げます。
  • ◆画像の表紙や帯等は実物とは異なる場合があります。
  • ◆ウェブストアでの洋書販売価格は、弊社店舗等での販売価格とは異なります。
    また、洋書販売価格は、ご注文確定時点での日本円価格となります。
    ご注文確定後に、同じ洋書の販売価格が変動しても、それは反映されません。
  • 製本 Paperback:紙装版/ペーパーバック版/ページ数 118 p.
  • 言語 ENG
  • 商品コード 9783032274045
  • DDC分類 660.6

Full Description

Previous research indicates that incorporating biomimetic beam‑like structures into topology optimization designs can enhance the lightweight characteristics of components such as aviation brackets that were produced by the additive manufacturing technique of powder bed fusion of metal with a laser beam. However, there is a need for detailed design methodologies to effectively implement such design modifications. The first research question of this thesis explores how a design methodology can be developed to generate biomimetic design components from density‑based topology optimization designs. The secondary research question assesses the lightweight characteristics of the outcomes generated by such a methodology, comparing them to those of the input topology optimization design. A five‑step design methodology with detailed submethodologies was developed. It takes a topology optimization design as an input and, in the first step generates an auxiliary 3D model consisting of cylindrical beams and spherical nodes that resembles the topology optimization design. A skeletonization approach is used for abstraction. In the second step, a finite element analysis of the auxiliary model is performed to evaluate the internal forces and moments in its beams. In step three, two biomimetic parametric beam designs as well as two conventional parametric beam designs are considered for parameter optimization for each of the beam load cases from the auxiliary model. The most lightweight optimized beam is selected for each of the beams of the abstraction, respectively. Buckling analyses and re‑dimensioning of optimized beams are performed, if necessary. In step four, adapted nodes for the biomimetic component design are generated. The nodes contain a lattice infill structure to ensure powder‑removability and a lightweight design. In step five, the complete biomimetic component design is validated by finite element analysis and the mass of the component is evaluated. Thus, a complete design methodology was developed successfully. Three common topology optimization problem formulations were considered for validation of the developed biomimetic design methodology. Finite element analyses of the biomimetic designs yielded the existence of critical regions of high stress in all three of the biomimetic components. However, the locations of critical stresses have been associated with specific regions within the biomimetic designs. Mass evaluation showed that the biomimetic component designs are 12.5 % - 30.3 % lighter compared to their topology optimization counterparts. The developed methodology stands out from previously existing research as it considers the internal forces and moments in beams and closes a research gap for detailed design methodologies for biomimetic structural components. This thesis contributes to harnessing the immense potential of biomimetic design in lightweight industries, such as aerospace and automotive. Future research should refine the presented methodology and perform experimental assessment of component designs generated by it.

最近チェックした商品