- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection offers materials researchers and end-users a wealth of new knowledge encompassing the whole spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and materials related to energy conversion.
Contents
Fabrication of Photocatalytic TiO2 Thin Film Using Innovative Aerosol Deposition Method
Titanium Oxide-Based Photocatalysts: -From Fundamentals to Practical Applications-
Design of Efficient TiO2/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in Water
Bioactivity of Plasma-Sprayed TiO2 Coating in Simulated Body Fluid by Hydrofluoric Acid Treatment
Nitride Formation on Titanium under Irradiation of Intense Pulsed Ion Beam
VOC Decomposition by Photocatalytic Wall Paper
Photo-Decomposition Property of Thermal Sprayed TiO2 Coatings
Hydrogen Production by Catalytic Decomposition of Methane over Carbon Nanofibers
Photocatalytic Oxidation and Decomposition of Acetic Acid over TiO2, TS-1 and Ti-MCM-41 Catalysts
Impact Evaluation to Human Body Skin of Titania Photocatalyst Fine Particles
A Novel Formulation for the Modification of Transition Metal Oxide Surfaces for Antifogging Optical Application
Dispersion Stability of TiO2 Powder Synthesized by Homogeneous Precipitation Process at Low Temperatures
The Electrochemical Properties of Poly(acrylonitrile) Polymer Electrolyte for Li/S Battery
Correlation of Superhydrophilicity and Photocatalytic Activity in the TiO2-Based Porous Thin Films
Photocatalytic Properties of Mesoporous TiO2 Films Derived from Evaporation-Induced Self-Assembly Method
Influence of Deposition Parameters on Adhesion/Cohesion of Plasma Sprayed TiO2 Coatings
A Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon Nanotubes
Photocatalytic Characterization of Plasma Sprayed TiO2 Coating in Environmental Engineering Application
Microstructure Characterization on TiO2 Based Anodes
Preparation and Antibacterial Activity of Silver Ions-Substituted Hydroxyapatite/Titania
Photocatalytic Decomposition of NOx Using Ti-, V-, and Mo-MCM-41 Catalysts
Influence of Doping on the Antibacterial Effect of TiO2 Nanoparticles
Raman Spectroscopic Investigation of Nitrogen-Doped Titanium Dioxide Nanoparticles
Characterization and Synthesis of Functional TiO2 Sol-Gel Coatings on the Glass
Photo-Oxidation Decomposition of TiO2 Photocatalyst for the Construction Materials
Preparation of Ternary Compound BaLi2Ti6O14 by the Sol-Gel Process
Dependence of Yellow Phosphor on Optical and Electrical Properties of the White Light Emitting Diode Chip
Effect of Hydrothermal Conditions on the Cation Exchange Capacity of MSWI Fly Ash
Mechanical Properties of Nanocrystalline HVOF Coatings
Characterization of Li1-xNi1+xO2 Prepared by Using Tartaric Acid as a Complexing Agent
Nd3+-Doped TiO2 Nanoparticles Prepared by Sol-Hydrothermal Process
The Effect of Substrates on the Characteristics of Titania Nano-Coated Particles Prepared by Fluidized Bed Chemical Vapor Deposition (FBCVD)
Photocatalytic Properties of TiO2 Coatings Prepared by Cold Spray Process
Effects of Constituents in Bio/Photocatalytic Hydrogen Production System Using Experimental Design Tool
Nanosized Titanium Oxynitride and Molybdenum Oxynitride Particles Assembled in Mesoporous Silica MCM-41
Simulation of Electric Upsetting and Forging Process for Large Marine Diesel Engine Exhaust Valves
Appearance of Indium Oxide Nanorods in MOCVD Growth
Compressive Deformation Behaviour of a Closed-Cell Aluminum
A Simple Reliable Method of Selecting Epoxy Molding Compounds for High Power Short Wavelength Light Emitting Diode Packages
Evaluating the Electrochemical Properties in the Protection Potential of Material for Use in Al Vessels in Seawater
A Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in Ships
Effects of Current Density on the Formation of Anodic Oxide Films on AZ91
CdSe/ZnS Quantum Dots Loaded Solid Lipid Nanoparticles: Novel Luminescent Nanocomposite Particles
Corrosion Behavior of Chromium Cast Iron and Steel in Hot Concentrated Alkaline
In-Situ Joining of Combustion Synthesized Ni-Al Alloys with Al Casting Alloy
Evaluation of Microstructure on SiCp/AZ91 Magnesium Composite Fabricated by Rotation-Cylinder Method
Sliding Friction and Wear Properties of Composite Reinforced by Mullite
Enhancement of the Characteristics of the ALD HfO2 Film by Using the High-Pressure D2 Annealing
Improvement of the Core Loss of SiFe by Optimizing the Operation Conditions of the Laser Scribing
Nanocrystalline Structure of Organic Photoconducting Materials Derived by Microwave Recrystallization Method
Microstructures and Wear Properties of Al Matrix Composites Fabricated by Two Different Processes
Dispersion Stability of Ni Nanoparticles in Ethanol with Poly (1-Vinyl-2-Pyrrolidone)
Effect of Heat Treatment on Microstructure, Tensile Properties and Damping Capacity of Mg-Zr Wrought Alloy
Microstructures and Mechanical Properties of Mg-Zn-RE-Ca Casting Alloys
Characteristics of Thin Film of Nano-Hybrid Synthesized from Acrylic Resin and Colloidal Silca-Silane Sol
Properties of Coating Films Synthesized from Nano Colloidal Silica and Alkoxy Silanes
Effect of Processing Parameters on the Fabrication of Al2O3p/Al Composites by In-Situ Reaction Process of Molten Al
Effects of Processing Parameters on the Mechanical Properties of SiCp/AC8A Composites by Pressureless Metal Infiltration Process
Wear Characteristics of Particulate Reinforced Metal Matrix Composites Fabricated by a Pressureless Metal Infiltration Process
Modification of Mg2Si Morphology in As-Cast Mg-Al-Si Alloys with Strontium and Antimony
Chipless Forming Process Using Rotary Swaging Machine with Four-Dies
Microstructure Analyses and FE Simulation of Automotive Product in the Hot Forging Process Using Aluminum Alloys
Castability, Tensile and Creep Properties of Mg-xAl-Zn with Variation of Al Content
Development of Manufacturing Process Using Cold Incremental Forming Technique for Micro-Alloyed Non-Heat-Treated Material
Development of Cube-Textured Ni and Ni-W Alloy Tapes by Focused Infrared Heating
Shape Memory Effect and Superelasticity of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers
Electrochemical and Structural Properties of Si/Ni/Cu Electrode Films Fabricated with Different Methods
Reciprocating Sliding Wear Behavior of Inconel 600 Mated with SUS 304 Stainless Steel at Elevated Temperatures
The Cavitation Behavior of Fe-Cr-C-Si-Ni Alloys
Effect of Tin on the Microstructures and Mechanical Properties of a Au-Pt-Cu Alloy
Effect of Indium on Bonding between Porcelain and Au-Pt-Cu Alloy
Fabrication and Magnetic Properties of Mullite Based Nanocomposites with Embedded FeCr Alloy Nanoparticles
Al-La-Ni-Fe Amorphous Alloys and Amorphous-Crystalline Composites Produced by Mechanical Alloying
Net-Shape Forming of TiAl Automotive Parts for Fuel Efficiency
Effect of Al on Microstructural and Mechanical Characteristics of Plasma Electrolytic Oxide Coatings on Magnesium
Effect of Impurity and Gas Nature on Microstructure of SiC Microtubes in Double Step Reaction Process
Modified Fabric and Its Electromagnetic Protection Characteristics
Interfacial Reaction between Molten Al Alloys and Titanium Matrix Composites
Preparation and Characterization of Chemical Activated Fibers on Various Carbon Fibers
Fabrication of Ni Sulfides by Thermal Sulfidation
Fabrication of Nickel-Silver Rods and Plate through a Small Cross Section Continuous Casting Process
Combinational Effects of Ni Precursors on Ni/YSZ Cermet Anode
Optimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer Simulation
Development of 2-Cavity Die Casting Process for AM50 Mg Steering Column Lock Housing Module
Synthesis Nanosized MgAl2O4 Spinel Powder with Excellent Sinterability
High Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based Alloy
Mechanical Behavior of TiB2 Nanoparticles Reinforced Cu Matrix Composites Synthesized by In-Situ Processing
Microstructures and Tensile Properties of Fe-40Al Intermetallic with High Boron Content
Fluidity of A356 Alloy during In-Ladle DTC Rheocasting
High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements
Microstructural Control of 7075 Al Wrought Alloys through Thixoextrusion Route
Thermal and Phase Evolutions of As-Milled Powders Fabricated by Mechanical Alloying in the TiH2-C System
H2S/CO2 Corrosion Behavior of Tubular Goods under High Temperature and High Pressure
Improved Heat and Corrosion Resistance of Mg-Al-Zn Alloys by Additions of Minor Alloying Elements
Characteristics of Spent Foundry Sand - Loess Mixture as Ceramic Support Materials
The Transfection Efficacy of Chitosan-DNA Nanoparticles on MGC803, SMMC-7721, MG63 Cells
Characteristic Evaluation of Extrusion Parameters on Direct Extrusion Process of 3003 Al Alloy Used for Automotive Condenser Tubing
Vacuum Diffusion Brazing of Al5052 Alloys Using Ag-28Cu Insert Metal
Morphological Evolution of Primary Solid Phase in Semi-Solid Slurry during the Isothermal Holding
Thermal Conductivity of Hot-Pressed BN Ceramics
Evaluation of Oxidation Behavior of the C-B4C-SiC Composite through Continuous Measurement of Mass Change and Gas Concentration
Modeling for Optimum Thermal Property of Wave-Typed Heat Sink by Computational Simulation
High Temperature Oxidation of TiAl(La)N Coating Deposited on a Steel Substrate by Arc-Ion Plating
High Temperature Oxidation of WC-ZrN Superhard Nanocomposite Film
High Temperature Oxidation of Electroplated Cr-C Coating
Cyclic-Oxidation of Ti3SiC2 and Ti3AlC2 between 900 and 1200oC in Air
Synthesis and Structural Investigation of Nano-Sized BaTiO3 Powders
Analysis of Deformation Characteristics in Wave-Typed Heat Sink Composed of Fin and Base
Thermal Stability of 40Cr Steel with Surface Nanocrystallization
Recrystallization Behaviors and High Temperature Tensile Properties of Mg-Al-Sn-(Zn) Wrought Alloys
Improvement of Corrosion Resistance of Stainless Steel by ZrO2-SiO2 Sol-Gel Coatings
Fabrication of Nano-Sized Gold Dot Array Using Bi-Layer Nano Imprint Lithography
Microstructure Evolution with Solidification Rates in IN 738LC Superalloy
TGO Growth Behavior with Thermal Fatigue and Its Effect on Fracture Behavior of Thermal Barrier Coatings
Relationship between Microstructure and Tensile Strength in the Directionally Solidified (23-27) at. % Al-Ni Alloys
Sub-100nm Hybrid Stamp Fabrication by Hot Embossing
Characterization of Fe-Mo Alloyed Nanoparticles Synthesized by Chemical Vapor Condensation Process
Growth of CNTs on 304 Stainless Steel Using Sparked Iron as a Catalyst
Abnormal Grain Growth Mechanism in Alumina
Effect of MgF2 Additive on the Mechanical Properties in Hydroxyapatite / Zirconia Composites
Estimation of Low Cycle Fatigue Life on the Accumulated Hysteresis Energy of Δσ·Δεp for Direct Aged Alloy 718 (Ni-Based Superalloys)
The XPS and GDS Study of SrBi2Ta2O9/ZrO2/Si (MFIS) Structure According to Heat Treatment Effects of ZrO2 Buffer Layer
Effect of Slag Layer on Flow Patterns in a Gas Stirred Ladle
Effect of Melt Depth and Nozzle Type on the Mixing Behavior in Bottom-Blown Steelmaking Ladle - A Water Model Approach
The Effect of Cold Equal Channel Angular Process on Texture of Magnesium Alloy (AZ31)
Kinetic Analysis of the Decomposition of Calcium Carbonate Using Danyang Limestone
Effect of Frit Content in Ag Paste and Thickness of Transparent Dielectric on Yellowing Phenomenon
Effect of Thermo-Mechanical Variables on the Dynamic Ferrite Transformation Induced by Hot Deformation in 0.22C-Mn Steel
Formation of Ultra Fine Ferrite and Determination of Critical Strain in the Strain Induced Dynamic Transformation for 0.22C-Mn Steel
Prediction of Flow Curves and Micro-Structural Evolution in Strain Induced Dynamic Transformation of Low Carbon Steel
Textures and Mechanical Properties of Melt-Extruded Al-Cu Alloys
Effect of Electromagnetic Stirring on Orientation Distribution Function of Primary Solid Phase of Al-Cu Alloy
Cell Sensing Margin of Lead-Free (Bi,La)4Ti3O12Thin Film Deposited on MTP Cell Structure in High Density FeRAM Device
Hydrogen Absorption Kinetics of Ti-Nb-Cr Alloys
Effects of La2O3 on the Piezoelectric Properties of Lead-Free (Bi0.5Na0.5)0.94Ba0.06TiO3 Piezoelectric Ceramics
Quantitative Analysis of Micro-Macro Domain Transition of PNN-PT-PZ(x) System at Higher PZ Content
Effects of Void Formation within the Pb-Free BGA Solder Balls on the Mechanical Joint Strength
Interfacial Reaction and Joint Strength on Cu UBM with Pb-Free Flip Chip Solder Bumps
TEM Observation of Interfacial Reaction Layers Formed Between Pb(Lead)-Free Sn-3.5Ag Solder and ENIG Plated Cu Substrate
Reliability of Sn-Ag-Cu Flip Chip Package with Underfill under Thermal Shock
The Effect of Boron on the Sliding Wear Behavior of Iron-Based Hardfacing Alloys for Nuclear Power Plants Valves
Sliding Wear Behaviors of Steam Generator Tubes in Various Environments
Fabrication of Lead Free Micro Solder Powder by Melts Dispersion Technique
Etching Mechanism of Pb-Free Glasses in Acid Solution for Barrier Ribs in Plasma Display Panel
Thermal Properties of Bi2O3-B2O3-ZnO Glass System
Formation of Layer on Bismate Frit Surface during Wet Milling
Development of Novel Wastewater Reclamation System Using Microfiltration with Advanced New Membrane Material and Electrodialysis
Changes in Adsorption Characterization of MSWI Fly Ash by NaOH Treatment ( Ⅰ )
Evaluation of Pelletized Adsorbent Made for Removing VOCs by MSWI Fly Ash ( Ⅱ )
The Effect of Meta Kaolines on the Activation of Waste Concrete Sludges
Fabrication Characteristics of Mineral Wool Fiber Used the Waste
Application of Media Manufactural by Waste Plastic to Stormwater Treatment in Urban Drainage System
Recycling of Waste Coal Fly Ash: Synthesis of Zeolite-Like Minerals from Residue Yielded by Extraction of Aluminum Ions
Polymer/Inorganic Composite Materials for Quick Repair of Cement Concrete Pavement
Luminescence Porous Ceramics Using Recycling Glass
Effect of Pair-Mineralizer on the Reaction of Alite and Calcium Langbeinite Formation
Zeolite Synthesis from Coal Bottom Ash for Recycling as an Absorbent of Heavy Metals
Stabilization Behavior of Heavy Metals Derived from Wastes on Cementitious Minerals and Hydrates
Effect of Slag Compositions on the Extraction of Metallic Components from the Used PCB
Low Temperature Synthesis of Porous Cordierite from Fly Ash
Fabrication and Characterization of Porous Ceramic Panel Using Recycled Glass Powder
Formation Characterization of Ultra-Fine Cu Powder from Cu(OH)2 Slurry by Wet Reduction Method
Characterization of Friction Materials Reinforced by Porous Mullite
A Study of Ga2O3 Nanomaterials Synthesized by the Thermal Evaporation of GaN Powders
Characteristics of SnO2 One-Dimensional Nanomaterials Synthesized on TiN-Coated Substrates by the Evaporation of Sn Powders
Self-Propagating High-Temperature Synthesis for Aluminum Oxynitride (AlON)
Effect of Hydrogen Content on Characteristics of Cu/C: H Films Coated on Polyethylene Terephthalate Substrate Prepared by ECR-MOCVD Coupled with a Periodic DC Bias
Effects of Annealing Atmosphere on the Optoelectrical Properties of ZnO Thin Films Grown by Atomic Layer Deposition
Sputter-Deposited Cr as an Alternative to Electroplated Cr
Environmentally Friendly Polyurea Microcapsules of Pesticides by PVA Mediated Interfacial Polymerization
Removal of Bilirubin by Albumin-Fixed Polysulfone Membrane
Effects of Anodizing Time on Anodizing of Mg-Al Alloy in Alkaline Solution
Energy Efficiency Alloy Design in PSN-PMN-PZT Ceramic System for Piezoelectric Transformer Application
Vibration-Damping Capacity of Lotus-Type Porous Magnesium at Room Temperature
Microstructural Transformations of an Amorphous Fe90 Zr10 Alloy Induced by High-Energy Ball-Milling
A Study for Microwave Enhanced Synthesis of NIR Absorbing Materials
Hydrothermal Syntheses of Nickel Nanosheets and Their Morphology
Characterization of Ni Nanopowders Produced by Electrical Explosion of Wire Technique
Effect of Physical and Chemical Change of Lignocellulosic Fiber on Heavy Metal Ion Removal
Surface Characteristics of the Engineered Polymeric Media for Filtration and Adsorption in Urban Runoff
Preparation of Nickel Powders by the Reduction of Hydrazine of Ni(OH)2 Reactant Slurries from Nonaqueous Media
Synthesis of Nickel Powders by the Reduction of Hydrazine from Diethanolamine Solution
Mechanical Properties of Copper Hollow Sphere Manufactured by Sintering Process
Nano Scale Material Property Measurement of MEMS Material Using Piezo Actuated Material Testing Machine
Effect of Indium on the Microstructures and Mechanical Properties of Dental Gold Alloys
Rheological Characteristics of Mg-Al Alloys with Ceramic Particles for Meta Foam
An Amperometric Biosensor Using Prussian Blue Modified Electrode
Preparation of Activated Carbon Fibers by Chemical Activation Method with Hydroxides
Preparation of Porous Hydroxyapatite Scaffolds for Bone Tissue Engineering
Synthesis of Biodegradable β-TCP/PLGA Composites Using Microwave Energy
Synthesis and Magnetic Properties of Fe/SiO2 Nanocomposite Powders by the Chemical Vapor Condensation Process
Fabrication of Nanoscale SiC-Based Ceramic Patterns with Near-Zero Residual Layers by Using Imprinting Technique and Reactive Ion Etching
Preparation of Silver Metallic Sponge from Macroporous Carbon Template
Synthesis of Polymeric Precursor for Oxidation-Resistant SiCBN Ceramic Microstructure via Soft Lithography
Influence of the Cup's Edge Geometry on the Transferred Stresses to the Ball/Cup Interface in all Ceramic THR
Effect of Pouring Temperature and Holding Time at Semi-Solid Region on the Morphology of Primary Solid Phase in Semi-Solid Slurry
Fabrication and Microstructure of ZnO-TiO2 Composite Membranes by a Reverse Micelle and Sol-Gel Processing
Fabrication and Microstructure of ZnO-SiO2 Nanoparticles by a Reverse Micelle and Sol-Gel Processing
Investment Casting of Ti Alloys for Biomedical Application
Controlled Release of Active Substance from Biodegradable Copolymer Matrix
Comparison of Silicon Coatings Deposited by Vacuum Plasma Spraying (VPS) & Atmospheric Plasma Spraying (APS)
Environmentally Conscious Gas Mixtures for Magnesium Melt Protection
Hydrogen Permeation and Surface Characteristics of Pd-Coated Ni-Nb-Ta Amorphous Alloy Membrane
Comparison of Hydroxyapatite Synthesized under Different Conditions
Densification Mechanism of Fine Ni-20Cr Powder during Pulsed Electric Current Sintering
Influence of Two-Step Sintering on Transparency of High Purity Alumina
Radio Frequency Interference Characteristics of Plate-Like Soft Magnetic Powders-Polymer Composites
Synthesis and Properties of Bulk Amorphous/Nanocrystalline Aluminum Alloy Composites
Design for Environment (DfE) of Ultralight Aluminum Camshaft Development
Tribological Analysis of Al2O3/TiO2/ZrO2 Nanocomposites as an Alternative for THR Materials
The Characteristic of the La3Ga5SiO14 Single Crystal Grown by Vertical Bridgman Method in Ar Atmosphere
Preparation and Characterization of a New Type of Sr-Contained Hydroxyapatite Bone Cement
High Grade Purification of Sericite by Hydrocyclone and Magnetic Separation
Fabrication and Properties of High Strength Al-8Fe-2Mo-2V-1Zr Alloy Produced by Melt Spinning Techniques
Low Elastic Modulus β Ti-Nb-Si Alloys for Biomedical Applications
Surface Modification of Glass Plate to Enhance Thickness of Silica Aerogel
Synthesis of AlON Refractory Raw Materials from Aluminum Dross Using Thermite Reaction Process
Thermopneumatic-Actuated Polydimethylsiloxane (PDMS) Microfluidic System
Process Development for Cost-Effective Ag-Ni Contact Materials by Simple Solidification Control
Novel Method to Fabricate Porous n-HA/PVA Hydrogel Scaffolds
Biomimic Tubulose Scaffolds with Multilayer Prepared by Electrospinning for Tissue Engineering
A Fast and Low Temperature Eco-Process for Alloy's Joining
Antibacterial Effect and Security Evaluation on Nano-Hydroxyapatite Bearing Cu2+ and Zn2+
Study on Improving Stainless Steel Antibacterial Capability
Influences of the Crystallization Behavior of n-HA Reinforced PA66 Biocomposite on Its Mechanical Properties
Foaming Characteristics of Al-Mg Alloy Foam
Fabrication of Porous Clay Materials with Aligned Pore Structures by Freeze-Drying
Solvents Effects on Physicochemical Properties of Nano-Porous Silica Aerogels Prepared by Ambient Pressure Drying Method
Estimation of Environment-Friendly Permeable Pavement at Laboratory Test
Development of Fiber Filter Media to Control Heavy Metals and Nutrients in Urban Stormwater Runoff
Use of Bauxite Minerals to Control Pollutant Outflow in Urban Areas
Preparation of SiC Nanoporous Membrane for Hydrogen Separation at High Temperature
Kinetics of the SiC Formation from Carbon Thin Film and SiO Gas
Modification of Natural Zeolite Powder and Its Application to Interior Non-Woven Textile for Indoor Air Quality Control
Study on the Biomimetic Properties of Bone Substitute Material: Nanohydroxyapatite/Polyamide 66 Composite
Via/Hole Filling by Pulse-Reverse Copper Electroplating for 3D SiP
Electrical and Luminescent Properties of Size Controlled ZnO Nanorods
Structure and Electrochemical Properties of FeSx Nanoparticles Synthesized by Chemical Vapor Condensation Process
Effect of Nano-Structures on the Optical Features of Hydrogenated Amorphous Si Films
Photo- and Electroluminescence of Hydrogenated Nanocrystalline Si Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques
Nanostructural and Optical Features of nc-Si:H Thin Films Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques
Effect of Porosity on Fatigue Strength of Lotus-Type Porous Copper
Microstructure, Mechanical Property and Antibacterial Characteristics of Ferritic Stainless Steel
Effect of Surface Morphology on Apatite Formation
Effect of Compatibilizers on the Properties of Nano-Hydroxyapatite Reinforced Polyamide 66 and High Density Polyethylene Blends
Study on the Properties of Microwave Absorption of Zinc Oxide Whisker
Preparation of Single-Phase Aragonite Precipitated Calcium Carbonate Used as an Inorganic Eco-Material
Inhibition Mechanism of Magnesium Ion on Carbonation Reaction with Ca(OH)2 and CO2
Hydraulic Properties of Tetracalcium Aluminoferrite with Adsorption of Silicate Ions
Growth of ZnO Thin Films by Metalorganic Chemical Vapor Deposition Using Isopropyl Alcohol for Oxygen Precursor
Growth of Carbon Nanorods on Tungsten Filaments of Light Bulbs
A Tetragonal Phase in Cr(N,O) Thin Film Prepared by Pulsed Laser Deposition
Clarification of Wire Heating Process in Pulsed Wire Discharge with High-Speed Gas Puff
Mechanical Properties and Machinability of Si3N4/hBN Composites Prepared by Pressureless Sintering
Micro Groove Forming on AlN/hBN Composites Using Powder Blasting Process
Microstructural Development of SiC Ceramics by Liquid-Phase Sintering with Spark Plasma Sintering Technique
Change of Formation Yield and Characterization of PCC Particle Synthesized with Impurity Ions Contents by Carbonation Process
Fabrication of Ceramic Microchannels with Tailored Pores
Electrical Properties of (Ba,Sr)TiO3 Thin Films with Self-Seed Layer Deposited by R.F. Magnetron Sputtering
Microstructure and Electrical Properties of R.F Magnetron Sputtering Derived PZT Thin Films Deposited on Interlayer for Pyroelectric IR Sensor
Factors of Nozzle Design Affecting on Supersonic Flow in Cold Spray Process
Preparation of Electrically Conducting Ceramic Foams
Silicon to Silicon Wafer Bonding at Low Temperature Using Residual Stress Controlled Evaporated Glass Thin Film
Effect of the Palladium Mid-Layer on the Cyclic Oxidation of Platinum Aluminide Bond Coating
The Effect of Tungsten Content on Nanocrystalline Structure of Ni-W Alloy Electrodeposits
Materials for Devices Applications in Life Sciences
Low-Temperature Thermoelectric Properties of Zn4Sb3 Prepared by Hot Pressing
Electrochemical Characteristics of Nano-Silicon/Graphite Composite for the Anode Material of Lithium Secondary Batteries
Graphite/Carbon Nanofiber Composite Anode Modified with Nano Size Metal Particles for Lithium Ion Battery
Effects on the Carbon Matrix as Conductor in Sulfur Electrode for Lithium/Sulfur Battery
Fabrication and Thermoelectric Properties of p-Type Bi1Sb4Te7.5 Alloy Doped with Fe3O4
Characterization of a Piezoresistive Microcantilever as a Sensor for Detecting the Bio-Molecules
Characterization of Electrical Properties of Si Nanocrystals Embedded in an Insulating Layer by Scanning Probe Microscopy
Charge/Discharge and Electrochemical Characteristics of Secondary Lithium/Pyrite Battery
Microstructure and Electrochemical Properties of Post Heat-Treated Li(Ni1/3Co1/3Mn1/3)O2 Cathode Materials for Lithium Ion Battery
Effects of Multiwalled Carbon Nanotubes on the Cycle Performance of Sulfur Electrode for Li/S Secondary Battery
Thermoelectric Properties of Te Doped CoSb3 -4mol%Zn4 Sb3
Fabrication of YSZ Thin-Film for SOFC Applied by Electron Beam PVD
Synthesis of Ceria-Coated Copper Oxide Particles for Direct Hydrocarbon SOFCs Anode
Microstructure and Thermoelectric Properties of P-Type Bi0.5Sb1.5Te3 Compounds Prepared by Spark Plasma Sintering
Effects of Heat Treatment on Hardness of Nanocrystalline Ni-W Electrodeposits
The Effects of Si Addition to the Tin Oxide Thin Films on the Electrochemical Characteristics for Lithium Secondary Microbattery Anode
Effects of Deformation on Atmospheric Corrosion of Galvanized Steel
Surface Strengthening of Polymer Micromold Using Electroless Ni-P Deposition
Synthesis and Analysis of Nano-Crystalline LiNiVO4
