- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
基本説明
Sectoins: Structural ceramics, functional ceramics, ceramic processing, ceramic characterization and layered or graded materials.
Full Description
Sponsored by the Chinese Ceramic Society, the China International Conference on High-Performance Ceramics (CICC) aims to provide an international forum for the presentation, discussion and review of the latest advances in the science and technology of high-performance ceramics.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volume contains selected papers from the third conference in the CICC series: CICC-3, which was held from the 9th to the 12th of May, 2004, in Shenzhen, China. It also contains 19 papers which were specially selected by Prof. Chang-Chun Ge and Prof. Jing-Feng Li from among the papers that were submitted to the First International Workshop on Layered and Graded Materials, which was organized as a special session within the framework of CICC-3.
Contents
Microwave Dielectric Properties of A-Site Modified Pb(Mg1/2W1/2)O3
Microwave Dielectric Properties of Mn-Doped Ba4.5Sm9Ti18O54 Ceramics
Microstructure and Microwave Dielectric Properties of Ba5(Nb1-xTax)4O15 (x = 0 ‾ 0.5) Ceramics
Effects of Co2O3 on the Dielectric Properties of Mg2TiO4- Mg2SiO4 Microwave Ceramics
(Ag1-xNax)(Nb1-yTay)O3 Dielectric Ceramic Prepared through Citrate Precursor Method
Effects of Ti4+ Substitution on Microstructure and Microwave Dielectric Properties of ZnNb2(1-x)TixO(6-3x) Ceramics
Influences of MnCO3 Doping on Processing Parameters and Dielectric Properties of ZnNb2O6 Microwave Ceramics
Effects of CuO-V2O5-Bi2O3 Additions on the Microstructure and Microwave Dielectric Properties of 0.42ZnNb2O6-0.58TiO2 Ceramics
Microwave Dielectric Characteristics of BaO-Nd2O3-TiO2 Nano-Particles by Millimeter-Wave Sintering
Effects of Mg2+ on Microstructure and Microwave Dielectric Properties of La2/3TiO3 Ceramics
Electronic Structure Calculations of Ba(Mg1/3Nb2/3)O3 and its Dielectric Properties Analysis
Dielectric Polarization of Ba2Ti9O20 Ceramics for Microwave Applications
Preparation and Structure of Ba2Ti9O20 and BaTi4O9 Ceramics Derived from Sol-Gel Powders
Sintering and Dielectric Properties of Nano-BaTiO3 Powder Synthesized by High-Gravity Reactive Precipitation
Modification of Ba6-3xSm8+2xTi18O54 (x=2/3)Microwave Dielectric Ceramics by Nd/Bi Co-Substitution on A-Site
Two Methods for the Measurement of Complex Permittivity of Microwave Dielectric Ceramics
Properties of Sr-Doped BaTiO3 Based X7R Ceramic Materials
Development of BaTiO3 Based X7R Wafers for Single-Layer Capacitors
Effects of Rare-Earth Oxides on Dielectric Properties of X7R Ceramics for Base Metal Internal Electrode Capacitors
Effect of Bi Content on the Dielectric Property of SBN Ceramics Prepared by Spark Plasma Sintering
Influence of ZrO2 on Dielectric Properties of Ba1-xSrxTiO3 Ceramics
Dielectric and Ferroelectric Properties of Ba1-xSrxTiO3 Thin Films Prepared by Pulsed Laser Deposition
Influence of MgO Content on Microstructure and Dielectric Properties in (BaSr)TiO3 Ceramics
Effect of CaTiO3 Content on the Dielectric Properties of Ba0.5Sr0.5TiO3
Dielectric Properties of Zirconium Tin Titanate with Additives of ZnO, CuO, MnCO3 and Bi2O3
Preparation and Dielectric Properties of Sm3+-Substituted SrBi8Ti7O27 Based Microwave Ceramics
Effect of PbO-B2O3 Glass Additive on the Dielectric Properties of Ba0.80Sr0.20TiO3 /Pb0.88La0.12Ti0.97O3 Composite Thick Films
Electric-Field Dependence of the Dielectric Behavior of BaxSr1-xTiO3 Ceramics at Different States
Effect of Lead Excess on the Formation and Dielectric Properties of Silver Dispersed Lead Titanate Film
Effect of SrO/BaO Ratio on the Phase Structure of the BSTN Composite Ceramics
Dielectric Properties of TiO2-NiO Ceramics and Its Response Mechanism
Dielectric Properties of TiO2-Al2O3 Composite Ceramics
Fabrication and Dielectric Properties of CNTs/SiO2 Composites
Preparation and Dielectric Properties of SiC-AlN Solid Solutions
Sintering and Properties of CaO-Al2O3-B2O3-SiO2 System Glass Ceramics
Influence of Dy Doping on Microstructure of PLZT Ceramics
Dielectric Characteristics of BZT Nano-Powder Based Ceramics
Preparation and Electrical Properties of Dense Bi4Ti3O12 Ceramics by Spark Plasma Sintering
Preparation and Properties of Low-Temperature Sintered SrBi4Ti4O15/Ag Composites
Effects of Ag-Pd Powder on Ferroelectric and Mechanical Properties of PLZT Ceramics
Co-Firing Behavior of Co2Z Hexagonal Ferrite/Ag Internal Electrode for MLCIs
Effects of Electrical Characters on Electrical Fatigue Behavior in PLZT Ferroelectric Ceramics
Fabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth Titanate Ceramics
Ferroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ Substitution
Morphology and Dielectric Properties of Lead Ziconate Titanate/Nano-ZnO Composite
Microstructure and Characteristics of PbTiO3-PbZrO3-Pb(Mg1/3Nb2/3)O3- Pb(Zn1/3Nb2/3)O3 Ceramics
Textured Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics by Templated Grain Growth
Electron Structure and Piezoelectric Characteristics of PMZN System Piezoceramics
Microstructure and Characteristics of Pb(Ti,Zr)O3 Ceramics with Addition of Pb-Based Glass Frit
A Novel Micro-Actuator Made from PZT
Effect of Sr Doping on Piezoelectric Properties of Pb(Mn1/3Nb2/3)O3-Pb(Zr,Ti)O3 Ceramics
Processing and Properties of PSZN-PZT Quaternary Piezoelectric Ceramics
Properties of Na1/2Bi1/2TiO3 Ceramic Prepared by Sol-Gel Method
Dielectric and Piezoelectric Properties of Praseodymium Modified Lead Zirconate Titanate Ceramics
Effects of SiO2 Substitution on Piezoelectric and Mechanical Properties of PMS-PZT Ternary Piezoelectric Ceramics
Preparation of PMZN Piezoceramic Using Sol-Autocombustion Synthesized PZT Powder as a Base
Structure and Piezoelectric Properties of PZN-PNN-PT Ceramics
Effects of Lanthanum Modification on the Structure and Electrical Properties of PZN-PZT Ceramics
Influence of Film Thickness on Optical Properties of PLZT Thin Films Derived from MOD Method
Enhancement of Photovoltaic Effect of PLZT Ceramics by Compositional Optimization and Grain Size Control
Sol-Gel Process and Properties of Textured Pb(Zr, Ti)O3 Films on Silicon Wafers
Fabrication of BST Films by Electrophoretic Deposition from Nano-Scaled (Ba,Sr)TiO3 Synthesized by Different Methods
New Lead-Free Ferroelectric Materials for High-Temperature Applications: Nb-Doped Bi3.5Nd0.5Ti3 O12
Dielectric and Piezoelectric Properties of Na0.42K0.08Bi0.5 TiO3 and Na0.45K0.05Bi0.5TiO3 Ceramics
Electrical Properties of the Mixed Bismuth Layer-Structured Bi7Ti4NbO21 Ceramics
Effects of Donor Doping on Microstructure and Electrical Properties of Bismuth Layer-Structured Bi4Ti3O12 Ceramics
The Influence and Mechanism of the Electrical Conductivity of (Ca,Sr)Bi4Ti4O15 Piezoelectric Ceramics by Doping of CeO2
Experimental Study on Damping Characteristics of Piezoceramic Materials Shunted by Passive Electrical Circuits
Effect of Gd2O3 on the Electrical Properties of (Co, Nb)-Doped SnO2 Varistors
Grain Size Effects of SnO2 Varistor Induced by Doping Pr
Antistatic Ceramic Tiles Modified by Sb-Doped SnO2
Preparation and Photoluminescence Properties of Quantum Size Zinc Oxide Colloids
Voltage Response of ZnO Varistors to 8/20 µs Surge Current
Nonlinear Electrical Properties of (Sc, Ta) Doped TiO2 Varistor Ceramics
Ag Nanoparticle Enhanced Photocatalytic Activity of Rutile TiO2 Films Prepared by Electrostatic Self-Assembly Method
The Role of Niobium in (Ca, Si, Ce, Nb)-Doped TiO2 Varistors
Effect of La2O3 and CeO2 on Nb2O5 Doped TiO2 Ceramic Varistors
Study on the Gas Sensitivity of a CeO2 Based Ceramic Sensing Element: Structure and Characteristic
Preparation and CO2 Gas Sensitive Properties of CuO-SrTiO3-Based Semiconductor Thin Films
Oxygen Sensitivity of SrFeO3-δ Thin Films Prepared by Sol-Gel Method
Study on Gas Sensing Properties of WO3 Thin Films
A Potentiometric SO2 Gas Sensor with Solid Reference Electrode
Effect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (70% mole V2O5- (15-x)% mole P2O5-15% mole B2O3) Semi Conducting Glass System
Preparation of Humidity Control Ceramics from Selectively Leached Kaolin
Effects of Glass-Additives on the Properties of Ni/Ceramic PTC Composites
Preparation of Ni/BaTiO3 Composites and PTC Effect
Study of Graphite/Bakelite/BaTiO3-Based PTC Ceramics Composite
Effect of BaCO3 and Pb3O4 on Properties of BaTiO3-Based PTCR Ceramics
Ni/Graphite/BaTiO3 PTCR Composites
Electrical Properties of BaTiO3 Doped with Lanthana and Niobia
Effect of Li+ and Mn2+ Doping on the Electrical Properties of SrTiO3-Based Varistor Ceramics
(Ba,Sr,Pb) TiO3-BaPbO3 System Compound PTC Ceramic
Impedance Analysis Study on the Sensing Process of BaTiO3 Based PTC Ceramics in CO Gas
Spin and Valence States of Manganese Ions in Mn-Doped BaTiO3 Ceramics by Electron Paramagnetic Resonance
Preparation and Properties of Titanium Oxide Photocatalyst with Visible Light Activity
Microstructure and Electrical Properties of CeO2-Doped WO3 Ceramics Prepared by Nanopowders
Thermoelectric Performances of ZrNiSn/C60 Composite
Preparation and Electrical Properties of Ternary Compound (PbTe)1-x(SnTe)x with Nanocrystallines
Effect of TeI4 Content on Thermoelectric Properties of N-Type Bi2(Te,Se)3 Materials Prepared by Spark Plasma Sintering
Bi2Te3 and Bi2Te3/Nano-SiC Prepared by Mechanical Alloying and Spark Plasma Sintering
Study on Si Dependence of RB-SiC Thermoelectric Properties
Synthesis and Electrical Transport Properties of TiCo1-xPdxSb Half-Heusler Compounds
Thermoelectric Properties on SixGe1-x Containing Fullerite
Advanced Hybrid Ion Conducting Ceramic Composites and Applications in New Fuel Cell Generation
Ceramic Technologies for Anode-Supported Solid Oxide Fuel Cells
Sulphate-Ceria Composite Ceramics for Energy Environmental Co-Generation Technology
Study of YSZ Amperometric Oxygen Sensor with a Dense Barrier Layer
YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet
Low Cost Fabrication and Performance of YSZ Electrolyte Thin-Substrate
Synthesis and Charge-Discharge Characteristics of Polycrystalline LiNi1-xCoxO2 (0 ≤ x ≤ 0.5) as a Cathode Material for Lithium Rechargeable Batteries
Effect of Iron Oxide on the Structure, Electrical and Magnetic Properties of (SiO2-B2O3-Li2O) Ionic Conducting Glass System
Characterization of LiFePO4 Synthesized by Sol-Gel Processing
Preparation, Dielectric and Magnetic Properties of Barium-Ferrite-Containing Microcrystalline Glass Ceramic by Citrate Sol-Gel Process
Weak Ferromagnetism and Magnetoresistance in Sm1/3 Sr2/3 FeO2.95
The Effect of 'Hydrogenation - Recalcination' Cycling on the Magnetic Properties of Strontium Hexaferrite
The Powder and Bulk Magnetic Properties of Strontium Hexaferrite Substituted by La and Nd
The Control of the Reactions of Strontium Hexaferrite Formation by the Molar Ratio of Precursors
Chemical Solution Deposition Growth of La0.7Ca0.3MnO3 Films and their Electric Pulse Induced Resistance Change Effect
Preparation and Magnetic Properties of Y-Type Ferroxplana by Sol-Gel Method
Preparation and Magnetic Properties of Low Temperature Sintering Bi-Substituted Yttrium Iron Garnet
Coating Nano-TiO2 on Optical Fiber with Al(H2PO4)3 Adhesive
Mechanism of the Acicular Nanosize Mg,Al-Hydrotalcite Grain Growth under Hydrothermal Conditions
Improved Artificial BP Neural Networks and Genetic Algorithm Used to Predict the Purity of the Artificial Synthetic Hydrotalcite
Synthesis and Characterization of Monodispersive In2O3 Particles
The Application of Porous Anodic Aluminum Oxide Membrane in Luminescence
Surface Modification of Long Afterglow Sr4Al14O25: Dy,Eu Phosphor by Silica Coating
Preparation and Luminescence of Y2O3:Eu3+ Nanopowder
Preparation and Upconversion Luminescence of YAG: Er3+ Powders
Synthesis and Luminescence Properties of Yb3+/Ho3+ Co-Doped Lu2O3 Nanocrystalline Powders
Preparation and Characterization of a New Phosphor Lu2O3:Eu3+
Multilayer ZrO2 Precursor Coated Polystyrene Particles
Development of 3D Ceramic Photonic Bandgap Structures
Micromorphologies and Defects in CVD ZnS and ZnSe
Photoluminescence Properties of Zn2SiO4:Mn 2+ Inverse Opals
Properties and Microstructure of Optically Transparent Polycrystalline Spinel
MgAl2O4 Transparent Nano-Ceramics Prepared by Sintering under Ultrahigh Pressure
New Style Thin Film Cathode Materials of Rare Earth Oxide Sintered by Spark Plasma Sintering (SPS)
Texture Development of Dip-Coated Bi-2223 Thick Films on Ag Substrate
Preparation of Ni-Co Spinel Oxide by Alloy Oxidation Method
The Stability of Porous Alumina Template in Electrolyte and the Formation of Amorphous Alumina Nanowires
Preparation and Characterization of Ordered Macroporous ZnO Films for Photonic Application
The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver Nanowires
Fabrication and Spectroscopic Investigation of La2Hf2O7-Based Phosphors
Novel Process for Synthesizing Nano-Ceramics Powder: Mechanical & Thermal Activation Processing
Preparation of MgAl2O4 Nanopowder by Homogeneous Precipitation Method
Study of the Technology of Chemical Copper Plating on Al-CuO Agglomerated Powders
Nanostructured Surface Coating Layer of Calcium Carbonate Composite Particles
Preparation and Characterization of Anisotropic Ammonium Titanium Phosphate Crystals via Hydrothermal Route
Biomimetic Synthesis of CaCO3 Particles with Specific Size and Morphology
Study on the Synthetic Process of Calcium Borate
Synthesis of BiFeO3-PbTiO3 Powders by Sol-Gel Auto-Combustion Process
Process for Non-Agglomerated Nanometer-Sized Barium Titanate Powders by Sol-Gel Auto-Igniting Synthesis
Preparation and Characterization of BaTiO3 Powders by Sol-Gel and BaTiO3 Ferroelectric Films by Electrophoretic Deposition Technique
Preparation of PLZT Powders from Oxides via High-Energy Ball Milling Process
Synthesis of Perovskite Pb(Zr0.52Ti0.48)O3 (PZT) Powders by a Modified Coprecipitation Method
Preparation of Nanocrystalline Ba3(Ca1.18Nb1.82)O9-δ Powder with Sol-Gel Auto-Ignition Synthesis Process
Low-Temperature Synthesis of PMnN-PZT Powders by Hybrid Method of Sol-Gel and Ultrasonic Atomization
Characteristics of Sr2CeO4 Powder Phosphor Prepared by Combustion Route
Combustion Synthesis of Nanosized Y2Hf2O7 and Lu2Hf2O7 Powders
Photocatalytic Properties of the Transition Metal Doped TiO2 Powder Prepared by Sol-Gel Process
Converting Industrial TiO2 into Titanate Nanotubes by Simple Sonochemical-Hydrothermal Processing
Synthesis of Nanometer Cobalt Oxide (Co3O4) Powders by Solid-State Reaction under Microwave Irradiation
Preparation and Characterization of Semi-Conducting (Ba,Sr)TiO3 Powders by a Wet Chemical Route
Synthesis and Characterization of BaCe0.8Y0.2O2.9 Nanopowder by Sol-Gel Auto-Ignited Method
LiCoO2 Cathode Material Coated with Nano-Crystallized ZnO by Sol-Gel Method
Surface Treatment of the Lithium Boron Oxide Coated LiMn2O4 Cathode Material in Li-Ion Battery
Synthesis and Characterization of LiNixCoyMn1-x-yO2 as a Cathode Material for Lithium Ion Batteries
Synthesis of (1-x) Ca0.4Sm0.4TiO3 - xLi0.5Nd0.5TiO3 Ceramic Powders via Citric Acid Precursor
Synthesis of Well-Crystallized Manganese Oxide from Precipitation: Effect of Introducing Carbonate Anions
The Microstructural Evolution of Mn3O4 Hausmannite during Autoxidation
Thermal Explosive Deforming Synthesis of SnO2 Nano-Fiber
Preparation and Utilization of Fine Expanded Perlite
Synthesis and Evaluation of Antibacterial Titanate Nanotubes
Hydrothermal Synthesis of Free-Standing Co3O4 Nanocubes
Low-Temperature Synthesis of Mono-Phase Ultrafine Yttrium Aluminum Garnet by Sol-Gel Combustion Process
New Processing of Textured Ceramics by Colloidal Processing Under High Magnetic Field
The Factors Affecting Colloidal Processing of 8YSCZ Ceramics
Synthesis of Poly (Acrylic Acid-Co-Itaconic Acid) and its Dispersing Effect for Barium Titanate Aqueous Suspension
Technologyand Equipment on Collide Injection Moulding of Ceramics
Storage Stability of Ceramic Slurries for Gelcasting
Gelcasting of BaO-Nd2O3-TiO2 Microwave Ceramics
Study of LSGM Slurry for Gel-Tape-Casting
A Study of Slurries in Aqueous Tape Casting Processing
Fabricating Metal Patterned Ceramic Substance by Tape-Casting
Solid Oxide Fuel Cell PEN Structures Fabricated by Tape Casting and Co-Firing Technologies
Viscoelastic Properties of Pb(ZrTi)O3-Based Slurry for Tape Casting
Low Temperature Synthesis of Strontium Barium Niobate by Spark Plasma Sintering
Study on Spark Plasma Sintering of NiAl2O4-Metal Inert Anodes
BaO-Nd2O3-TiO2 Nano-Ceramics Prepared by SPS Technology
Co-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape Casting
Shape Forming and Microwave Sintering of Thin Wall Tubular Lithium Aluminate
Synthesis and Densification of Nanometer K0.6Sr0.7Zr4P6O24 Powder
Effects of Substrates on the Composition and Microstructure of TiO2 Thin Films Prepared by the LPD Method
The Physical and Antibacterial Properties of Argentine-Doped TiO2 Film on Stainless Steel Substrate
Preparation of Li+-Doped TiO2 Films by Sol-Gel Process
Preparation of TiO2 Thin Films Using Inorganic Peroxo Titanic Complex and Autoclaved Sols as Precursors
TiO2 Coating on Optical Fiber with Different Slurry States
Study on the Macro-Residual Stress of 304 Stainless Steel Coated with TiO2-SiO2 Thin Films by Sol-Gel Process
Study on Nano Film of TiO2 and ZnFe2O4 Composite Prepared by Dip Coating Method
Preparation of (111)-Oriented Pt Electrode Films with Quasi-Monocrystal Properties on MgO/TiN Buffered Si(100) by PLD
Preparation of TiO2 Coating on the Glass and Hydrophilicity under Sunlight Irradiation
The Properties of Antimony-Doped Tin Oxide Thin Films by the Sol-Gel Approach
On the Microstructure and Electrical Properties of Undoped and Antimony- Doped Tin Oxide Thin Film Deposited by Sol-Gel Process
Growth and Characterizations of Relaxor-Based Pb(Mg1/3Nb2/3)O3-PbTiO3 Thin Films by Sol-Gel Method
Synthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-Gel Technique
Preparation and Electrical Properties of (100) Preferred (Ba,Sr)TiO3 Bilayer Thin Films Derived from Pulse Laser Deposition Method
Preparation of SrBi2Ta2O9 Ferroelectric Thin Films by Liquid Source Misted Chemical Vapor Deposition Method Using Inorganic Salt Solution
Evaluation of Texture in Pb(Zr0.52Ti0.48)O3 Films Prepared by Sol-Gel Route
Effects of Seeding on Large Crystal Growth of NaX Zeolite by Continuous Crystallisation
Effect of Process Conditions on Stability of Ni-ZrO2 Composite Electroplating Bath
Study on Alkyd-Based Electrically Conductive Coatings
Impact of Heat Treatment on the Electrical Properties of LaNiO3 Conductive Thin Films
Preparation and Properties of CuInS2 Thin-Film by Successive Ionic Layer Adsorption and Reaction (SILAR) Method
Pore Size Determination of Supported Organic-Inorganic Hybrid Membranes by Modified Gas Permeation Method
Joining between Ceramics and Metal in Composite Pipes Fabricated by the SHS Metallurgical Process
Coating and Intergrowth of NaX Molecular Sieve Films on Porous Ceramic Paper for Membranes
Preparation of Y-Doped Barium Cerate and Strontium Cerate Membranes
Study of Novel Self-Humidifying PEMFC with Nano-TiO2-Based Membrane
Preparation of Color Pearlescent Pigment Using Rare-Earth Oxide and Titanium Oxide to Coat Mica
Formation and Oxidation Resistance of NbSi2 Coatings on Niobium by Pack Cementation
Pretreatment of the TaSiN Substrate Surface for Copper-MOCVD
Electromechanical Coupling Characteristics of SMA Wires under the Constraints of Stress and Strain
Anderson-Stuart Model to Analyze AC and DC Conductivity of Lithium Zinc-Silicate Glass / Glass-Ceramics
The Influence of Bi3+ on the Sintering of Cordierite Glass Ceramic
La2O3/Al2O3/B2O3 Based Glass-Ceramics for LTCC Application
Processing and Characterization of La2O3-SiO2-B2O3 (LSB) Based Glass-Ceramics for LTCC Application
Dependence of Dielectric Behaviour of Magnesium Aluminum Silicate Glass-Ceramics on Alumina Content
Effect of ZnO on Thermo Physical and Structural Properties of Lithium Zinc Silicate Glass-Ceramics
Infrared-to-Visible Upconversion Emissions in Er3+ Doped TeO2-Based Oxyhalide Glasses
Effect of Alkaline-Earth Metal Composition on Spectroscopic Properties of Er3+ in Fluorophosphate Glasses
Design of Multiphase Materials
Anelasticity and Strength in Zirconia Ceramics
The Study on Degradation of Y2O3-CeO2-Partially Stabilized ZrO2 Adding Al2O3 Particles at Low Temperature
Study on Preparation of Spherical Zirconia Powder in Microemulsion System and its Surface Characteristics
Preparation of Zirconia Nanopowders in Ultrasonic Field by the Sol-Gel Method
Preparation of Refractory Nozzle by Gelcasting of Zirconia Suspensions with Coarse Particles
Plastic Forming of Zirconia from Coagulated Suspensions
Fabrication of Porous Zirconia Using Filter Paper Template
Properties of ZrO2/Glass-Ceramics Composite
Effect of Dopants on the Corrosion Behaviour of Zirconia by Steel at High Temperature
The Effect of Zirconia Sol-Gel Coatings on Mild Steel Oxidation Resistance
Indentation Creep in Zirconia Ceramics under Variable Loads
Effects of Zircon Additive on the Properties of 95-Alumina Ceramic
Strength of Liquid-Phase-Sintering Cordierite Ceramics
Alumina Whiskers Formation during Self-Propagation High-Temperature Synthesis
Study on Stability of Nano-Al2O3 Aqueous Suspension
Colloidal In-Situ Consolidation Forming of Al2O3 Ceramics Using Modified Starch
Surface Modification of Al2O3 Fine Powders and Application in Epoxy Resin
Dispersion and Rheological Properties of Alumina Freeze Casting Slurries Containing Nanoparticle/Whisker SiC
Rheological Behaviors of Alumina Aqueous Suspensions
Effects of Solid Volume Fraction on the Gelcasting of Alumina Suspensions
Modification of Al2O3 Microfiltration Membrane by Nano-ZnO Coating
Mechanical and Wear Properties of Al2O3-15wt%ZrO2 Composites
Fabrication of Nano-Micron Al2O3-ZrO2 Ceramic Eutectic Composites from the Melts by the SHS Metallurgical Process
Microstructure and Mechanical Properties of Al2O3/ZrO2 Composites Prepared by Gelcasting
Effects of PLS on Green State Joining ZrO2/Al2O3 Ceramics
Freeze Casting of Aqueous Al2O3/Y-TZP Slurries
Effect of Microstructure on the Wear Resistance of Alumina Dispersed Y2O3-ZrO2 Ceramics
Cordierite-CeO2 Composite Ceramic: A Novel Catalytic Support Material for Purification of Vehicle Exhausts
Machinability Evaluation of Ce-ZrO2/CePO4 Ceramics with Digraph Method
Wear of Twist Drills in ZrO2/CePO4 Composite Machining
Characteristics of Machinable LaPO4/Al2O3 Composites
Preparation of CIM Feedstock of Al2O3-SiC Nanocomposite
Pressureless Sintering the Al2O3/SiC Nanocomposites in Deoxidized Atmosphere
Preparation of Al2O3-TiC Composite Powder by SHS Process
Synthesis and Properties of Al2O3 Nanocomposite Ceramics Toughened by Nano Metallic Particles
The Study of Self-Propagating High-Temperature Synthesis of TiC-Al2O3/Fe Composites from Natural Ilmenite
Preparation of Nano Ni/Al2O3 Composite Powders
Al2O3 Multiphase Ceramics Coatings Sprayed by SHS-RFS Based on the Cladding Powders
Study of Graphite in Al2O3 Ceramic with Copper Matrix
Wear Resistant of Al2O3/Heat-Resistant Steel at High Temperature
Wear of the Al2O3-Based Multi-Ceramic Coatings Produced by SHS Flame Spraying
Influence of Loading Conditions on Cyclic Compressive Fatigue Behavior of an Al2O3 Matrix Composite
Manufacture and Properties of AlON-TiN Particulate Composites
Study of the AlON-VN Composite Ceramic
In Situ Reaction Synthesis of Porous Silica-Matrix Ceramics
Polycrystalline Silicon Thin Films on SiC Substrates for Solar Cells
Fabrication of Silica Colloidal Crystal Multilayer with Controlled Thicknesses by Vertical Deposition
Preparation and Formation Mechanisms of Monodispersed Mesoporous SiO2 Microspheres by the PICA Method
Mullite Composite Phase Nanocrystalline from High-Silica Kaolin under Normal Pressure and Temperature: An Experimental Study
Solar Cells from Thin Silicon Layers on AlN
Preparation of High Capacity Thin-Wall Rutile Tube for Ozone Generator by Colloidal Injection Moulding of Ceramics
Synthesis of MgO Nanowires Combined with C Nanotubes
Growth and Characterization of High Quality MgO Thin Films by Ultrasonic Spray Pyrolysis
A Predicting Method for Thermal Conductivity of Functional Carbide Crystals and Ceramic Materials
Negative Thermal Expansion up to 1000oC of ZrTiO4-Al2TiO5 Ceramics for High-Temperature Applications
Improving the Strength of Al2TiO5 by Adding Spodumene
Effect of MgTi2O5 Addition on Thermal Shock Resistance of Al2TiO5
Development of SHS-Si3N4 in LSCPM
Investigation on the Modification Methods to Ceramic Cutting Tools
High-Performance Ceramic Coatings Sprayed via Novel Supersonic Plasma Spraying System
Structure of the Coatings onto Ceramic Cutting Tools Deposited by Pulsed High Energy Density Plasma
Bending Strength of Ceramics Implanted by Titanium, Zirconium and Chromium Ions with MEVVA Source
High Strength and High Toughness Anisotropic Silicon Nitrides Fabricated by Forging Technique
Fabrication and Properties of the Tape-Cast Si3N4 with Rod-Like Si3N4 Seed Addition
Preparation and Characterization of Rod-Like β-Si3N4 Seeds
Production of Si3N4 Whiskers in Solid Mixtures through Vapor-Solid Mechanism Using 2MgO 2Al2O3 5SiO2 as Sintering Additives
Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4 Ceramics
Effects of Technical Parameters on the Phase Composition and Microstructure of Yb α-SiAlON Prepared by Combustion Synthesis
Combustion Synthesis of β-SiAlON Whiskers
Preparation of β-SiAlON Powder at Low Temperature
Superplastic Forming of Silicon Nitride at Low Temperature
Effect of Microstructure on Sliding Wear of Ca α-SiAlON Ceramics
Study on Thermal Conductivity of Spark-Plasma-Sintered Silicon Nitride Ceramics
Effect of Cation Extraction on the Oxidation Resistance of Si3N4
Polycarbosilane Conversion Bonded Porous SiC Ceramics
Microstructure and Properties of Reaction-Formed Silicon Carbide
Spheroid Growth during Sintering of Copper Coated Silicon Carbide Particles in the Fabrication of Nanocomposite
On the Theoretical Model for Radar Absorbing Property of SiC
Investigation on Superposition Rule and Influence of Multi-Thermal-Source Temperature Field on SiC Synthesizing
Preparation of Oriented Porous Silicon Carbide Bodies by Freeze-Casting Process
Gelcasting of Aqueous Silicon Carbide / Carbon Black Slurry
Formation Mechanism of Interior Microflaws in the Preparation of Polymer-Derived Silicon Carbide Fibers
Fabrication and Characterization of Porous Mullite Coating on Porous Silicon Carbide Support
Characterization of Fiber-Reinforced SiC Composites by Precursor-Pyrolysis and Hot-Pressing
SiC Coatings Deposited by RF Magnetron Sputtering
Ultra-Fine Treatment of SiC Powder and Its Effect on Microstructure and Properties of SiC Ceramic
Erosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid Flow
Friction and Wear Characteristics of SiC and Si3N4 Ceramics Against ZrO2 Ceramic under Dry Friction
Study on Erosion Resistance of Structural Ceramics
Unlubricated Sliding Wear of TiN Particle Reinforced Si3N4 Matrix Composites Against AISI-52100 Steel Ball
Erosion Wear Characteristics of Si3N4 Fabricated from Low-Cost Powders
Oxidation Behaviors of MgAlON/Si3N4 Composite at High Temperature
Synthesis of Ti3SiC2 Bulk Materials with B2O3 Additive
A Soft Ceramic Ti3SiC2 with Microscale Plasticity at Room Temperature
Frictional Layer and Its Antifriction Effect in High-Purity Ti3SiC2 and TiC-Contained Ti3SiC2
Sliding Friction Behavior of Bulk Ti3SiC2 under Difference Normal Pressures
Tribo-Chemical Reaction in Bulk Ti3SiC2 under Sliding Friction
Fabrication and Mechanical Properties of HAp/Ti3SiC2 (60 vol.%) Composite by Sparkle Plasma Sintering
Fabrication and Properties of Ti3AlC2-Based Ceramics by Two-Step Method
Synthesis of High Purity Ti3AlC2 Bulk Material by Hot-Pressing
Bending Creep and Stress Relaxation of Ti3AlC2 at High Temperature
Synthetic of Zr2Al3C5 Material
Reaction Synthesized Boron Nitride-Containing Composites (BNCC)
Sintering of Vitrified Bond CBN Grinding Tool
Study on the Performance of CBN Abrasives with Ti Coatings
Morphology and Reaction Mechanism of AlN Fibers Synthesized by Carbothermal Reduction
Thermodynamics and Kinetic Considerations behind the Growth of AlN Whiskers Synthesized by Carbothermal Reduction
Influence of Powder Characteristics on Sintering of AlN Ceramics
Effect of Grain Growth Inhibitor on the Microstructure and Mechanical Properties of Ti(C,N)-Based Cermet
Study of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP Sintering
Combustion Synthesis of Ti(C,N) Powder
Fabrication of TiC-Ti Porous Materials by Combustion Synthesis
Combustion Synthesis of TiNx C1-x Powders with Ultra Fine Particle Size by Using Titanium Oxide as Dilution
Combustion Synthesis and Two-Time Densification of TiB2-Cu Composites
Effect of Pressure on TiB2-Cu Composite via In-Situ Reaction Synthesis
Large-Scale (Ti,Cr)B2-Cu Composite by Combustion Synthesis
Electroless Plating of Ni-P-CNTs Composite Coating
The Structure and Hardness of rf-Reactive Sputtered Ti-Zr-N Films
Tribological Behaviour of Combined Coatings Deposited on Aluminium
Effect of Oxidation on the Wear Behavior of a ZrN Coating
Fabrication of Vanadium Nitride by Carbothermal Nitridation Reaction
The Mechanism of the Formation of MoSi2 by Self-Propagating High-Temperature Synthesis
The Fracture Toughness and DBTT of MoB Particle-Reinforced MoSi2 Composites
The Thermal Stability of Mo(Al,Si)2 Phase
Resource Recovery of WC-Co Cermet Using Hydrothermal Oxidation Technique
Determination of Sintering Temperature of Nanocomposite WC-Co
Study on the Wear Resistance of Micro-Nanostructured WC Composite Coating Sintered by Induced Heating
Preparation of Al-Based Metal Matrix Composites Reinforced by Cu Coated SiC Particles
Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier Coatings
Synthesis of Gadolinium Zirconate by Coprecipitaiton and Its Properties for TBC Application
Thermal Conductivity of the New Candidate Materials for Thermal Barrier Coatings
Preparation and Characterisation of Gd2Zr2O7 Ceramic by Spark Plasma Sintering
Hydrolysis of α-TCP and Development of Hydroxyapatite Whiskers
Preparation of Porous β-TCP Ceramics
Microwave Plasma Sintering and In Vitro Study of Porous HA/β-TCP Biphasic Bioceramics
Effect of Electrodeposited Hydroxyapatite Coatings on Biomedical Titanium by Cathode Revolving
Preparation and Effectiveness of Antibacterial Hydroxyapatite Powder Containing Silver
Morphology Tailoring of Hydroxyapatite Nanoparticles by Hydrothermal Processing with Amino Acids
Precipitation of Hydroxyapatite on Oxide Film Containing Ca and P by Hydrothermal Treatment
Preparation of Porous Hydroxyapatite Scaffolds
Study on Physicochemical Properties of the Carbonated Hydroxyapatite Bone Cement
Mechanical Properties of Macroporous Biphasic Calcium Phosphate Bioceramics Fabricated Using a Porogen
Gelcasting of Mechanochemically Synthesized Hydroxyapatite
Synthesis of Calcium Phosphate/Gypsum Composite Powders
Processing of Calcium Phosphate Porous Materials by 'Self-Setting'
Setting Behavior of Fast-Setting Calcium Phosphate Cement with Mineral Phase of Bone
Synthesis of Apatite Ceramics with Bimodal Pore Structure Using Mechanochemically Prepared Fine Apatite Powder
Formation of Bone-Like Apatite of Bioceramics Modified by Cold Plasma in SBF and Mechanism of Active Modification
Apatite Formation on Porous TCP In Vitro: A Comparative Study between Static and Dynamic RSBF Systems
Preparation and Evaluationof Macroporous Sol-Gel Bioglass with High Mechanical Strength
Mechanism of Apatite Formation on Sol-Gel Derived PDMS-Modified SiO2-CaO-P2O5 Hybrids with Various P2O5 Content
MPACVD Nanocrystalline Diamond for Biomedical Applications
Microstructure and Controllable Degradation of Bioglass Reinforced Calcium Phosphate Scaffolds
The Influence of Nanosized Leucite on Dental Porcelain Properties
Microstructure and Bio-Mineralization Behavior of the Sol-Gel Derived Bioactive Materials
Structural Assessment of Microsphere-Based Tissue Engineered Scaffold from Poly(Lactic Acid)/ß-Tricalcium Phosphate
Effects of Ingredients and Post-Heat Treatment on Phase Transformation and Structure of Bioactive Composite Coatings
Improving Subcritical Crack Growth Resistance for Alumina Glass Dental Composite
Study of Animal Bio-Ceramic Implants with 3D High Resolution CT
The Monolithic Glass-Ceramic Lined Steel Elbow Made by SHS Gravitational-Thermite Process
Crystallization and Thermal Expansion of MgO-Al2O3-SiO2-TiO2 Glass-Ceramics
Crystallization and Mechanical Properties of Spodumene-Diopside Glass Ceramics
Preparation and Characterization of the Nano Powder for Al2O3-SiO2-CaF2 Glass by Homo-Precipitation Method
Micro-Morphology of Crystal Separated from Glass by the Heat-Treatment with an Electric Field
Nucleation and Crystallization of Glass-Ceramics from Coal Fly Ash
Surface Crystallization of ZnO-Al2O3-SiO2 Glass
Indentation Size Effect in the Nanohardness of Soda-Lime Glass
Study on Corrosion Mechanism of CAS Glass-Ceramic to Refractories by EPMA
Study of Thermal Shock Resistance of Sagger Plate Used in Floppy Magnets Sintering
Preparation and Characterization of Al2O3 Coated Graphite Powders
Colloidal Process of Magnesia-Carbon Refractory and Its Sintering Characteristic
Effect of CaO Content and Microstructure on Hydration Resistance of MgO-CaO Clinkers
β-SiAlON Bonded Corundum Material and Its Application as Sliding Gate Plate for Continuous Casting
Corrosion Behavior of BF Slag to SiAlON Bonded Corundum Refractories
Slurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic Machinery
Oxidation Properties of Three Dimensional (3-D) Carbon Fiber Preform Coated by SiC-SiO2
Thermal Expansion Behavior of Al Hybrid Composite Reinforced with Aluminum Borate Whisker and Magnetic Ceramic Particle
Dry Friction and Wear Properties of Aluminum Matrix Composites Reinforced with 3D Network Ceramics
Oxidation Process of FeNi42Cr6 Alloy Array Materials
Phase Changes in Fe-Si Powder Mixtures by Mechanical Alloying and Subsequent Heat Treatment
Formation of Fe-6.5wt%Si Sheets by Powder Rolling and Sintering
Improving the Suspension Property of Non-Plastic Material Slurry with Lecithin
Study on the Cemfiber Reinforced High-Performance Concrete
Studies on the Improving Performance of Ordinary Concrete
The Brazilian Reliability Test and Micromechanical Modelling for Channelled Cylinders of Multiphased Porous Ceramics
Unified Model for Fracture of Brittle Solids
Novel Estimation of Critical Frontal Process Zone of Ceramics by a Single-Edge V-Notched-Beam Technique
A Tensile-Load Relaxation Test for Measuring the Stress Enhanced Corrosion Exponent of Ceramics with Open Porosity
Description of Unloading Behavior of Berkovich Nanoindentation
Determination of the Load-Independent Hardness by Analyzing the Peak-Load-Dependence of the Unloading Slope in Nanoindentation
Properties of Cracking Resistance of Cemfiber Reinforced Concrete
Investigation on Stress Fields in Lined-Ceramics of the Composite Pipes Fabricated by SHS Metallurgical Process
Thermal Fatigue Life Prediction of Ni Base Alloy Ceramic Composite Coating
The Toughening Action of Comprehensive Transformation on Mixed Mode II-III Ceramics
Design and Fabrication of an Advanced Ceramic Material Based on the Wear Resistance
Study on the High Efficiency Organic Grinding Fluid Used for Ceramic Grinding
Sphering Mechanism for the Green Ceramic Balls Ground with the Two-Wheels Grinding Technique
Wettability of SiC/Ag Plus Ti System
Stages of Reactive Wetting
A Novel Approach for Metal Surface Modification
In-Flight Behavior of Ceramic Particle in Plasma Spray Forming
A Numerical Simulation for Temperature Field of Plasma Arc Cutting Ceramics
Near Net Forming of Metal-Ceramic Parts by Plasma Spraying
Characterization Methods of Pores in Ceramics and Their Analysis
Nonlinear Dynamic Analysis and Nonlinear Structure of Self-Propagating High-Temperature Synthesis Process
Probabilistic Modeling for Composites with Particle Interface Degrading
Numerical Simulation of Temperature Field in Desulphurizing Lance
Application of Materials Design Based on Genetic Neural Network
Some Aspects of Research on Layered Ceramic Composites in China
Carbo-Nitride Coating Treatment of Titanium by a Diffusional Method
Development of Functionally Graded Anti-Oxidation Coatings for Carbon/Carbon Composites
Design, Processing and Evaluation of Graded Piezoelectric Ceramic Bending Actuators
Multi-Layer Silicon Nitride Laminates Exhibiting High Fracture Toughness and Crack Deflection
Mechanical Properties and Oxidation Behavior of Si3N4/BN Laminated Ceramics
Laminated Si3N4/SiC Composites with Self-Sealed Structure
High-Temperature Mechanical Properties of Al2O3/Ti3SiC2 Multilayer Ceramics
TiB2/AlN/Cu Functionally Graded Materials (FGMs) Fabricated by Spark Plasma Sintering (SPS) Method
Effect of TiC Content on Fracture Toughness of TiC-Ti5Si3 Composites
Diamond Coated on Cobalt-Deficient Gradient Tungsten Carbide
Microstructure and Mechanical Performances of Plasma-Sprayed Functionally Gradient HA-ZrO2-Bioglass Coatings
Electrophoretic Deposition of Pb(Zr,Ti)O3 Powders on Silicon Wafer and Sintering Densification Approach
Preparation and Characterization of Compositionally Graded Epitaxial Barium Strontium Titanate Thin Films via Scanning Probe Microscopy
Raman Spectra Study on Multilayered Compositional Graded (Ba0.8Sr0.2)(Ti1-xZrx)O3 Thin Films
Fabrication and Evaluation of PZT/Ag Piezoelectric Composites and Graded Actuator
The Preparation and Properties of New Silver-Metal Oxide Graded Composite Electrical Contact Materials
Preparation of Multilayer Barium Titanate PTC Thermistor with Low Room Temperature Resistance
Application of Ceramics Metal Functionally Graded Materials on Green Automobiles
