- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Composite materials have come to play essential roles in various areas of industry and technology during the past few decades due to their excellent performance. In order to exchange innovative ideas and technical information in this area, Chinese scientists on both sides of the Taiwan Strait have already met twice since 2000. The 3rd cross-strait conference on composite materials was held on May 7-12, 2003, in Wuhan, China; sponsored by the Natural Science Foundation of China (NSFC).
Contents
Fabrication and Properties of Carbon Nanotube/SiO2 Composites
Preparation of Al2O3-ZrO2-Ni Nano-Composites by Spark Plasma Sintering
Effect of Atmosphere and Interlayer Thickness on the Mechanical Properties of 3D C/PyC/SiC Composites under Cyclic Stressed and Unstressed Conditions
Flexure Creep Behaviors of Si3N4/BN Laminated Ceramic Composites Produced by Rolling
Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite
Microstructure and Properties Analysis of Composites Based on Woodceramics
Pressureless Infiltration of Porous Al2O3/Ni Compacts with 6061 Al Alloy
High Volume Fraction SiCp/Al Composites Prepared by Pressureless Melt Infiltration: Processing, Properties and Applications
The Role of Intermediate Phases in Synthesizing Intermetallic Matrix Composites
Effect of Coating Microstructure on Ni/Al2O3 Composites
Effect of Surfactants on the Properties of Carbon Nanotube-Reinforced SiO2 Matrix Composites
Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes - (1) Synthesis of Carbon Nanotubes
Strong Machinable Ceramic Nano-Composites with In Situ Synthesized BN
Effect of C60 Particle Dispersion on Thermal Conductivity of CoSb3
Effect of γ-Al2O3 Content on the Thermoelectric Performance of ZrNiSn/γ-Al2O3 Composites
Microstructure Characterization and Effective Thermal Conductivity of Mo-PSZ System
Mechanical and Electrical Properties of Small Amounts of In2O3 Reinforced PZT Ceramics
Effect of Additions of Oxide on Microstructure and BDTT of MoSi2/Oxide Composites
Fabrication of Si/SiC Ceramic Composites Derived from Paper
Microstructural Characterization of LaB6-ZrB2 Eutectic Composites
Fabrication of (TiB2-Fe)/Fe Functional Gradient Material by SHS/QP
Microstructure and Mechanical Properties of the Boride Doping TiB2 Ceramic
Welding TiB2 and Fe with Combustion Synthesis
A Method of Preparation of TiB2 Nano-Powders and its Mechanism
Investigation of Ceramic-Matrix Nanocomposites via Metal Organic Chemical Vapor Deposition
Preparation and Properties of 0-3 PZT/PVDF Piezoelectric Composite
Densification of Short Carbon Fiber Reinforced Silicon Carbide by Spark Plasma Sintering
Fabrication of Ti/Al2O3 Composites by Spark Plasma Sintering
Design and Optimization of Al2TiO5/Al2O3 System Functionally Graded Materials
Self-Assembling Synthesis of Vanadium Oxide Nanotube Incorporating Organic Molecules
Surface Modification of LiNi0.5Co0.5VO4 by Overcoating with SiO2
Synthesis of Aluminum Nitride Nanocrystals and Platelets
The Preparation and Characterization of 3D-Silica Fiber Reinforced Silica Composites
Flexural Properties of 3D- SiO2/ SiO2 Composites
Toughening and Strengthening Mechanism of Zirconia-Alumina Multiphase Ceramics
Friction and Wear Characteristics of Alumina- Strengthened Zirconia Ceramics
Preparation of Nano-Sized Alpha-Alumina Crystallites Using Theta-Theta-Alumina Composite Powders
Growth Thermodynamics and Kinetics of Nano-Sized Alpha-Al2O3 Powders
Geometry Effect on Spark Erosion Behavior of Silver Matrix Composites
Workability of Spray-Formed Al/Sip Metal Matrix Composites
Study of the Composite Coating of SiC Particles Dispersed in an Electroless Nickel Matrix
The Hybrid Composite with Shape Memory Alloy and its Smartness
Manufacture and Performance of Particulate Reinforced Titanium Matrix Composites
Isothermal Oxidation of In Situ Synthesized TiC/Ti-6Al
Damping Capacity of Pure Mg Metal Matrix Composites
Fabrication and Mechanical Properties of Al2O3 Reinforced NiAl Composites
The Dry Sliding Wear Behavior of SiCp/Cu Composites
Hot Extrusion and its Effect on Microstructure and Properties of Squeeze Casting SiCp/Al Composites with Lower Volume Fraction of Reinforcement
High Temperature Mechanical Behavior and Microstructure of α-Si3N4w/4032Al Composite Fabricated by Squeeze Casting
Study of the Nucleation and Growth Behavior of Al2O3-SiO2/LD11 Composites Fabricated by Squeeze Casting Method
An Experimental and Numerical Study of the Hot Compressive Deformation Behavior of Metal Matrix Composites with Misaligned Whiskers
Effect of Bonding Condition on Microstructure and Properties of the Si3N4/Si3N4 Joint Brazed Using Cu-Zn-Ti Filler Alloy
A Processing Parameters-Microstructures Diagram for the Fabrication of In Situ TiCp/Fe Composites
Intragranular Structure of In Situ TiCp/Fe Composites and its Formation Mechanism
Synthesis of Al2O3/Al Composites by Reaction between SiO2 and Molten Al
Fabrication and Mechanical Properties of SiC/Al Composites by Die-Forging of Semi-Solid
Microstructure and Tensile Properties of Al Hybrid Composites Reinforced with SiC Whiskers and SiC Nanoparticles
Densification of Ti-Sc System Alloys by Spark Plasma Sintering Technique
Preparation and Quasi-Isentropic Characteristics of Graded Density Flier-Plates
Fabrication of Ti-Mg System Composite with Graded Density at a Low Temperature by SPS Method
Densification of Mo-Ti Functionally Graded Material Prepared by Co-Sedimentation
Microstructure Analysis of W-Mo-Ti Functionally Graded Materials Fabricated by Co-Sedimentation
Microstructure of Fe-6.5wt%Si Composite Powders Prepared by Mechanical Alloying
Fabrication of Non-Equilibrium Fe-Si Compact by Spark Plasma Sintering
Preparation of Fe-Si Composite Powders by Mechanical Alloying
Microstructure of Fe-Si Prepared by MA-SPS
Electron Transfer Effect between Pd and Fe(Bi) in Pd-(Fe or Bi)2O3-Polymer Hybrid Catalytic Materials
On Lifetime Estimation for Engineering Material Under Static Load
Fracture Behavior of Brittle Materials Under Complex Loads
Solid Chemical Synthesis in Millimeter-Wave Field of Spinel Li-Mn-O as Cathode Materials for Li-Ion Batteries
Fracture Behavior Simulation of 3D-C/SiC Under Stress and in Oxidation Environment
Simulation of Low Shrinkage of PVAc
Numerical Simulation of Micro-Infiltration in a Fiber Bundle
The Effect of Low Profile Additives on Unsaturated Polyester Resins During Curing at Low/Medium Temperature: Shrinkage Behavior Study
Unsaturated Polyester System in Liquid Composites Moulding
Development of a Novel Low-Cost Processing Technique for Vacuum Assisted Resin Transfer Molding
Effects of an Inorganic Additive on the Interfacial Properties of Glass-Fiber / Magnesium-Oxychloride Cement Composites
Optimized Design of Multi-Ingredient Radar Absorbing Materials Using Genetic Algorithms
Study of Polycrystalline Iron Fibers/ Barium Titanate Nanocomposite Absorbing Materials
Effect of Nanosized Dopants on the Magnetic Properties of the Low Power Loss Manganese Zinc Ferrite
Nanocomposite YSZ-Ni Based Cermet Powders Synthesized by Complexes-Gel-Conversion Process
Fiber Reinforced Sulfonated SBS Proton Exchange Membranes
Piezoresistivity of Graphite Modified Asphalt-Based Composites
The Performance and Application of Cement-Based Grout Material with High Hour Strength
Chemical Features of the ITZ between Cement Paste and Aggregate
The Testing of Friction Materials with Two Kinds of Fibrous Industrial Minerals
Mechanochemical Modification of Wollastonite and its Application to Polypropylene
Preparation and Major Properties of Montmorillonite/Epoxy Nanocomposites
Organic-Inorganic Complex Sensing Materials
Sol-Gel Derived Complex Sensing Membranes for Detection of Oxygen
Study of the Complex Enzyme Membrane for a Fiber Optic Glucose Sensor
Preparation and Properties of Nanoscale Composite Materials Used in Intelligent Vibration Control System
A Novel Method for the Covalent Modification of Hydroxyapatite
Preparation of Chitosan/Gelatin Composite Fibers and their Biodegradability
Effect of the BMP on the Degradability of the Porous Calcium Phosphate Bioceramic in vivo
Effects of Additives on the Performance of Gypsum-Matrix Composites
The Structure and Photocatalytic Activity of CeO2 Doped TiO2 Films Deposited onto Glass by Magnetron Sputtering
XPS Study of N-doped TiOx Thin Films Prepared By DC Reactive Magnetron Sputtering
A Study of Argon Arc In Situ Reactive Syntheses of Fe2B Reinforced Layer on Low-Carbon Steel Surface
Combustion Synthesis of γ-TiAl Intermetallic Compound Powder
Numerical Simulation of the Temperature Field in Sintering of BN by SPS
Preparation of Nano-Structured SnO2 Powder by DC Arc Plasma
Research on Tribological Surface Chemistry of PTFE Composite
Laser Pump Cavity Composites with High Reflectivity
Simulation of Low-Voltage Electromagnetic Compaction Process of Powder Material
