High-Performance Ceramics IV (Key Engineering Materials)

Pan, Wei (EDT)/ Gong, Jiang Hong (EDT)

Trans Tech Publications Ltd（2007/04発売）

• 製本 Paperback:紙装版/ペーパーバック版／ページ数 2800 p.
• 言語 ENG
• 商品コード 9780878494101
• DDC分類 620.14

Full Description

Volume is indexed by Thomson Reuters CPCI-S (WoS).

Contents

Processing, Properties and Possible Applications of PZT-Based Thin Films
High Piezoelectric Property and Low Dielectric Constant PZN-PZT Ceramics
Molten Salts Synthesis of Relaxor Ferroelectrics PMN-PT Powders
Effect of PbO-Based Glass Frit Additives on Physical and Electrical Properties of 0.125PMN-0.875PZT Piezoelectric Ceramics near the Morphotropic Phase Boundary
Electrical Properties of (1-x)(0.8PMN-0.2PNN)-xPT Ceramics near the Morphotropic Phase Boundary
Effects of Rare Earth Gd Doping on Ferroelectric Properties of PbZr0.52Ti0.48O3 Thin Films Prepared by Sol-Gel Methods
Textured Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics Prepared by Reactive Templated Grain Growth
The Effect of Zn2+ Deficiency on Ordered Micro-Regions and Dielectric Properties of Pb(Zn1/3Nb2/3)O3-Based Relaxor Ceramics
Structure and Electrical Properties of Pb(Ni1/3Nb2/3)O3-Pb(Zr/Ti)O3 Relaxors
Pb(Mg1/3Nb2/3)O3- Pb(Ni1/3Nb2/3)O3-PbTiO3 Crystals by Solid State Growth
Effect of Different Doping on the Structure and Field-Stability of PMNT Ceramics
Structure and Electrical Properties of Rapid Thermally Annealed PZT Films Deposited through Sol-Gel Process
Dielectric Properties and Phase Transition of [110]-Oriented 0.68PMN-0.32PT Single Crystals Induced by Temperature and DC Electric Field
Preparation of Pb(Mg1/3Nb2/3)O3 Relaxor Ferroelectric by Sol-Gel Route
Dielectric Properties of (Bi1/2Na1/2)TiO3-SrTiO3 Ferroelectric Ceramics
Dielectric Properties of Y3+-Doped Ba0.62Sr0.38TiO3 Ceramics
Piezoelectric and Dielectric Properties of (Bi0.5Na0.5)TiO3- (Bi0.5K0.5)TiO3-BaTiO3 Lead-Free Piezoelectric Ceramics
Investigation of Field-Induced Piezoelectric Properties in Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics for Transducer Applications
Low Temperature Sintering (Ba1-xSrx)TiO3 Ceramics by Using CuO-TiO2 Mixture as Sintering Aid
Preparation of Plank-Like BaTiO3 by Hydrothermal Soft Chemical Process from Layered Titanate Precursors
Preferred Orientation Growth of Ba0.6Sr0.4TiO3 Thin Films with Epitaxial MgO Buffer Layer on Si(100) Substrate
Reliability of Ba(Zr0.1Ti0.9)O3 Ferroelectric Thin Films under Various Frequencies for Nonvolatile Memory Application
Preparation and Characterization of Citrate Sol-Gel Derived Ba(Zr,Ti)O3 Ceramics with Al2O3 Addition
Effect of Deposition Parameters on Crystallization of RF Magnetron Sputtered BST Thin Films
The Effect of Different Doping Methods of Sintering Aids on the Barium Titanate Based X7R Ceramics
Preparation of Ferroelectric BaTiO3 Films by Electrophoretic Deposition Technique
Preparation and Dielectric Properties of the Nb and Co Doped Barium Titanate by Sol-Gel Auto-Ignition Synthesis Process
Fabrication of (Ba,Sr)TiO3 Thin Films by Hydrothermal Crystallization of Sol-Gel Precursor
Dielectric Properties of HGRP BaTiO3 Based X7R Materials
Synthesis and Characteristics of Infrared-to-Visible Upconversion Nanoparticles through a Microemulsion System
Influence of Different Dopants on the Piezoelectric Properties of the Na1/2Bi1/2TiO3-BaTiO3- Lead-Free Ceramics
Tape Casting of Ba0.7Sr0.3TiO3 for Tunable Microwave Devices
Electrophoretic Deposition Ba0.65Sr0.35TiO3 Thick Films for Tunable Microwave Devices
(Ca,Sr,Ba)TiO3-Based Dielectrics Sintered in Reducing Atmosphere
Electric and Damping Properties of PU Based IPNs-BaTiO3 Nanocomposites
Texture Development in Na1/2Bi1/2TiO3-BaTiO3 Ceramics by Reactive-Templated Grain Growth
Effect of Sr/Ba Ratio on Dielectric Properties of BSTN Ceramics
The Influence of Thin Film Thickness on the Characteristics of Bismuth Titanate Oxide
Structure and Dielectric Properties of Homogeneous Srm-3Bi4TimO3m+3 (m = 3, 4, 5, and 6) Ceramics
The Influence of Precursor on the Microstructure and Characterization for Sr0.5Ba0.5Bi4Ti4O15 Thin Films
Synthesis and Properties of (Bi0.5Na0.5)TiO3 Powders by Hydrothermal Method
Fabrication and Properties of SrBi2(Ta1-xNbx)2O9 Ferroelectric Ceramics
Study on Ferroelectric Properties of Nd-Doped Bi4Ti3O12 Thin Films Prepared by Sol-Gel Method
Electrical Characteristics and Microstructures of Gd-Doped Bi4Ti3O12 Ceramics
Electrical Characteristics and Microstructures of Nd2O3-Doped Bi4Ti3O12 Thin Films
Dielectric Characterization and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin Films
Dielectric Characteristics of Doped Strontium Titanate within Broad Temperature Range
Hydrothermal Preparation of Bismuth Titanate Nanopowders
Fabrication of Bi3NbTiO9 Thick Films by Air Flow Deposition
The Crystalline, Dielectric and Pyroelectric Properties of (1-x)Pb(Sc0.5Ta0.5)O3-xPb(Zr0.52Ti0.48)O3 Relaxor Ferroelectric Ceramics
Epitaxial Growth and Electrical Characterization of PBZT Thin Films by RF Magnetron Sputtering Deposition
Microstructure Characteristics in the BaTiO3-La2O3-Nb2O5 Ternary System
Ferroelectric Properties of Bi3.4Y0.6Ti3O12 Thin Films Prepared by a Modified Sol-Gel Process
Phase Structure and Electrical Properties of Bi1/2Na1/2TiO3-KNbO3 Lead-Free Piezoelectric Ceramics
Sintering and Dielectric Properties of Excess Bi2O3 Doped BaBi2Nb2O9 Ceramics
Preparation of Bi-Layered SrBi2Ta2-xVxO9 Ceramics (0.1 ≦ x ≦ 0.4)
Microwave Dielectric Properties of Ca[(Li1/3Nb2/3)0.95Zr0.15]O3+δ Ceramics with Ba2+ Substitution at A-Site
Influence MnO2 on the Properties of (LixNayK1-x-y)NbO3 Ceramics
Preparation of Ferroelectric K0.5Na0.5NbO3 Films by Sol-Gel Processing
Composition Range of Morphotropic Phase Boundary and Electrical Properties of NBT-BT System
Effects of Processing Conditions on the Dielectric Properties of CaCu3Ti4O12 Ceramics
Preparation and Characterization of LiNbO3 Thin Films Derived from Metal Carboxylate Gels
Bridgman Growth of a Novel Piezoelectric Single-Crystal Material: Ca3NbGa3Si2O14
Preparation and Properties of (La, Sr) MnO3 Thin Films Prepared by Sol-Gel Method
Na1-xKxNbO3 (x=0.2‾0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering
Effect of TiO2 Nanopowders on the Sintering and Electric Properties of Lead Zirconate Titanate Ceramics
Stability of the Perovskite Structure in BSPT-Based Ferroelectric Ceramics
Properties of Ultrafine High Curie Temperature (1-x)BiScO3-xPbTiO3 Ferroelectric Ceramics
Preparation of Composite Ceramics of NiFe2O4/PZT by Sol-Gel Method and their Magnetoelectric Effect
Investigation of High-Quality ZnO Film on Polycrystalline Diamond Wafer for Fabrication of High Frequency SAW Filter
Preparation of BaTi4O9 - BaPr2Ti4O12 Composite Powders via Ethylenediaminetetraacetic Acid Precursor
The Influence of La2O3 Additive on the Dielectric Properties of Ba0.6Sr0.4TiO3-MgO Bulk Ceramics
Preparation of BaSm2Ti4O12 Microwave Dielectric Ceramics via a Polyacrylamide Precursor
Phase Development and Microwave Dielectric Properties of Ba4(Sm1-yNdy)9.33Ti18O54
Fabrication of Ba6-3x(Sm0.2Nd0.8)8+2xTi18O54(x=2/3) Ceramics by Solid State Reaction
The Microwave Characteristics of Glass-Ba2Ti9O20 Ceramics
Effects of Ta5+ Substitution on Structure Transition and Microwave Dielectric Properties of Zn(Nb1-xTax)2O6 Ceramics
Influence of Hydrothermal Conditions on ZST Powders for Microwave Ceramics
Dielectric Properties of Ba(Mg0.2/3Zn0.8/3Nb2/3)O3 and Ba1-xSrx(Mg0.2/3Zn0.8/3Nb2/3)O3 Microwave Ceramics
Effects of CeO2 Additive on Property of Ba0.6Sr0.4TiO3-MgO Ceramics for Phase Shifter
Effects of CuO and V2O5 Addition on Sintering Behavior and Microwave Dielectric Properties of (1-x)Ca2P2O7-xTiO2
Structure and Dielectric Properties of Zn Doped PST Thin Films Prepared by Sol-Gel Method
Microwave Dielectric Properties of (1-x)(Ca0.61Nd0.26)TiO3-x(Li0.5Sm0.5)TiO3
Temperature Compensated (1-x)(Na0.5La0.5)TiO3+xCeO2 Microwave Dielectric Ceramics Incorporated with Copper Oxide
Preparation and Microwave Dielectric Properties of (1-x)Ca2/5Sm2/5TiO3 -x Li1/2Nd1/2TiO3 Ceramics
Effect of ZnO-V2O5 Co-Doping on Phase Stability and Microwave Dielectric Properties of ZnTiO3 Ceramics
Effect of V2O5 Addition on the Microwave Dielectric Properties of Ba(Mg1/3Nb2/3)O3 Ceramics
Structure and Dielectric Properties of Citrate Sol-Gel Derived Microwave Ceramics in CaO-ZnO-TiO2 System
Microwave Dielectric Property of Porous Silicon Nitride Ceramics
Preparation and Microwave Permittivity of SiC-AlN Solid Solution Powders
Properties of Silicon Nitride Using Cordierite as Sintering Additives
Research on Sintering Dynamics and Microwave Dielectric Properties of Bi and Mn Doped Lead-Based Ceramics
A Piezoelectric Actuator for Transporting Living Cells
Organic-Inorganic Nanocomposite Electrodes for Dielectric Elastomer Actuator
Electro-Mechanical Coupling Performances of a Piezoelectric Bimorph
Mechanical Properties of Piezoelectric Stack Actuators under Electro-Mechanical Loading
Analysis of Dynamic Response for Piezoelectric Vibration Converter by Finite Element Simulation
A Novel Cylinder Driving Ultrasonic Motor
Actuative Properties of CP Actuator Consisting of Polypyrrole Film and Solid Polymer Electrolyte
Resonant Modes of Piezoelectric Disc Structure and their Application in Micro Ultrasonic Motors
Dynamic Properties of Fine-Scale 1-3 PZT/Epoxy Piezoelectric Composites
A-Site Cational Size Disorder Effects in La0.55Ca0.45MnO3
Electric Fatigue of PZT Piezoelectric Ceramics under Bias and Unipolar Pulse Cycling Field
Bipolar Electric Fatigue in Ferroelectric Nb-Doped PZST Ceramics
Propagation and Deflection of Electric-Field-Induced Microcracks in 0.69Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 Ferroelectric Single Crystals
Degradation of Lead Zirconate Titanate Piezoelectric Ceramics Induced by Water and AC Voltages
Degradation Aging of BaTiO3 Microwave Ceramic Capacitors for EMI Applications at High-Voltage
The Interfacial Characteristics of Ba0.6Sr0.4TiO3 Films Deposited by Radio Frequency Magnetron Sputtering
Dielectric and Magnetic Properties of BaTiO3/NiFe2O4 Composites
Dielectric Properties of Pb(Zr,Ti)O3 Heterolayered Thick Films Fabricated by Screen-Printing Method
Fabrication and Electrical Conductivity of a YSZ-NiCr Cermet
Preparation and SEM of Ni/Ce-YSZ Anode Materials
Proton Conductivity of Amorphous Hydrated Zirconia-Yttria Solid Solutions
Synthesis and Characterization of (Gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell
Preparation and Properties of Ce0.9Sm0.1O1.95 as the Electrolytes of IT-SOFC
Nitrate-Citrate Combustion Synthesis and Properties of Ce1-xGdxO2-x/2 Solid Solutions
Structural and Morphological Transformation of NaX Zeolite Crystals at High Temperature
A Study on SrCe0.9Y0.1O3-α Synthesized by Solid State Reaction and the Liquid Citrate Method
High Performance Low Temperature Ceramic Fuel Cell with Zinc Doped Ceria-Carbonates Composite Electrolyte
Limiting Current Oxygen Sensors with LSF as Dense Diffusion Barrier
Structure and Ionic Conductivity of Ln2Zr2O7-Type Rare Earth Zirconates
Electrical Conductivity of Mixed Conductors (YO1.5)x-(CeO2)y-(ZrO2)1-x-y
Novel Catalytic Electrodes for High Performance Solid Oxide Fuel Cells Operated at Intermediate Temperatures
Fabrication of YSZ/Ni Composites by Gelcasting
Microstructure and Electrical Conductivity of Ni-YSZ Cermets Prepared by Combustion Synthesis Method
NiO-SDC Powder for Solid Oxide Fuel Cell Anode Applications by Buffer Solution Method
Preparation and Characterization of Sm1-xSrxCoO3 Ceramics by the Gelcasting Process
Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm2O3, Gd2O3, Eu2O3 and CeO2) for La2O3 in La
On the Sealing Materials for SOFC
Investigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion Batteries
Electrochemical Performance of Al2O3-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-Ion Batteries
Synthesis and Electrochemical Properties of a LiNi0.7Co0.3O1.9Cl0.1 Cathode Material for Lithium-Ion Battery
Improvement of the Electrochemical Performance of LiFePO4 Cathode Composite Material Using a In Situ Pyrolysis Carbon Synthesis Procedure
Preparation and Electrochemical Characterization of Mn/Pb Composite Oxides for Supercapacitors
Design and Preparation of Nano-Electrodes for Dye-Sensitized Solar Cell
Preparation of Spherical Spinel LiMn2O4 Cathode Material for Lithium Ion Batteries
Ultra Stable Sealing Glass for Intermediate Temperature Solid Oxide Fuel Cells
Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells
Fuel Cell Studies Using the CeO2-La2O3 Based Electrolytes
Novel AC-MO-CSC Anode for Direct Methanol Low Temperature Ceramic Fuel Cells
Manufacturing Processes of Solid Oxide Fuel Cell Components
Electrochemical Performance of AA Size MCMB/LiCoO2 Lithium-Ion Battery Using Three-Electrode Cell
LiNiO2 Thin Films Fabricated by Diffusion of Li on Ni Tapes
Improvement of Electrochemical Properties of LiFePO4/Carbon Composite Doped by Al3+ Ions
Spinel Li4Ti5O12/C Composites as Potential Anode Materials of Lithium Batteries
Al2O3 Coating of Spherical LiNi0.8Co0.2O2 for Li-Ion Batteries
Fine Lithium Iron(II) Phospho-Olivine Prepared by Different Methods
Fine-Particle Lithium Iron Phosho-Olivine Synthesized by a Novel Modified Solid-State Reaction
The Effect of Silicate Layers on Electrochemical Properties in Nanocomposite Solid Polymer Electrolytes
Low Temperature Electrolyte for Li-Ion Batteries
Poly(Acrylonitrile-Methyl Methacrylate) Based Microporous Gel Electrolyte for Li-Ion Battery
Novel-SiO2-Doped Proton Exchange Membrane for Self-Humidifying Fuel Cell
Nano Sulfur Composite for Li/S Polymer Secondary Batteries
Optical Property of Spark Plasma Sintered Translucent AlN Ceramics
Modification of Optical Waveguide Material PMMA with Nano-Silicon by Sol-Gel Approach
Synthesis and Second-Order Optical Nonlinearity of Inorganic-Organic Hybrid Films Bearing Y-Type NLO Active Chromophore
Optical Properties of Nanocrystalline Ag Doped Silica Inverse Opals
Large Nonlinear Optical Property of SrBi2Nb2O9 Thin Films Prepared by RF Magnetron Sputtering
Up-Conversion Luminescence in Thulium Doped Barium Titanate Inverted Opal
Dependence of Electrical and Optical Properties of the Al Doped ZnO for Transparent Conductors Deposited by rf-Magnetron Sputtering on the O2/Ar Gas Flow Ratio
Crystallinity and Photoluminescence Properties of ZnO Films on Zn Buffer Layers Deposited by rf Magnetron Sputtering
Fabrication, Properties and Theoretical Simulation of Multi-Layer Ceramic Structure Meta-Materials
Influence of Coumarin Dyes on the Laser Performance of Pyrromethene and Perylene Dyes Co-Doped into ORMOSILs
Growth and Characterization of Zinc Oxide Films by Pulsed Laser Deposition for Ultraviolet Detection
Enhancement of the Quality of the ZnO Thin Films by Optimizing the Process Parameters of High-Temperature RF Magnetron Sputtering
Preparation and Characterization of ZnO Thin Film Doped with Eu via Sol-Gel Method
Zinc Oxide Thin Films with Reduced Native Compensative Defects Grown by Ultrasonic Spray Pyrolysis at Atmosphere
Synthesis and Characterization of Y2O3:Eu3+ Film Derived by Sol-Gel Processing
Luminescence Properties of MO-Re2O3-B2O3:Eu3+ (M= Mg, Sr; Re=Y, Gd ) under VUV Excitation
Preparation and Properties of Ti, Eu Co-Doped Y2O2S:0.06Ti,0.08Eu Phosphor with Red Long Afterglow
Luminescence Reducing Mechanism of Cd Doped Y2O2S:Ti,Cd Long Afterglow Phosphor
Modification of Ce-Doped YAG Phosphor with Flux and Ion Substitution
Synthesis of Green-Emitting Phosphor Y3Al5O12: Tb, Ce, Gd by Sol-Gel Method
Study on the Synthesis of Long Afterglow Nano-Phosphors SrAl2O4:Eu,Dy by Microemulsion Method
Preparation of a New Red Long Afterglow Phosphor Strontium Aluminate Composition
Luminescence Properties of Spherical Phosphors SrSiO3:Eu3+
Luminescence Properties of M2MgSi2O7: Re (M = Ba, Sr, Ca) (Re = Eu2+, Ce3+, Tb3+)
Luminescent Properties of Sr2B5O9Cl Phosphor Doped with Eu
Synthesis and Luminescent Properties of Ce3+-Activated SrGa2O4 andSr(Ga-Al)2O4
Microstructural and Micromorphological Studies on ZnSe Single Crystals Using AFM/FE-SEM/RO-XRD
Ga2O3 Films Grown on Sapphire by the Thermal Evaporation of GaN Powders
Synthesis of Ultrafine Lu2Hf2O7/Tb Phosphor by Solution Combustion Process
White Anodic Coatings on Aluminum Alloy with Low Ratio of Solar Absorptance to Infrared Emittance
Near-Infrared Luminescence and Energy Transfer Characteristics of Dy3+-Tm3+ Co-Doped Selenide Glasses
Effects of Glass Frits on the Properties of Luminescent Ceramics
Strong Near-Infrared Luminescence from NiSi2-Passivated Silicon Nanocrystals Embedded in SiOx Films
Annealing Environment Effect on the Nanocrystalline Silicon Related Photoluminescence in Silicon Rich Alumina Films
On the Multilayered Chip-Type PTC Elements Prepared by Roll-Forming Process
Liquid Desiccant Drying Method for Gelcasting PTC Ceramics Based on BaTiO3
Microwave Synthesis of BaTiO3 from BaCO3 and TiO2
Relations between the Morphology of ZnO Powders and the Electrical Performance of ZnO Varistors
Equivalent Model of Modified Bismuth Oxides Described by Fractional Derivatives
Microstructure and Electrical Properties of ZnO-Pr6O11-Dy2O3-Based Varistor Ceramics Doped with La2O3
Preparation and Acetone Sensitive Characteristics of Pure and Cu2+-Doped LaFeO3 Semiconductor Thin Films
Synthesis of La-Mn Substituted M-Type Ba Hexaferrites by Sol-Gel Method
Ferromagnetic Properties of Ni0.2Cu0.2Zn0.6Fe2O4-PZT Composites
A New Low-Temperature Sintering Method for NiCuZn Ferrite
An Investigation on the Optimum Conditions for Preparation of Pure Mn-Mg-Zn Ferrite Powder
Optimization of the Effective Parameters on the Synthesis of the Mn-Zn Ferrite Powder with a High Saturation Magnetization Using Different Iranian Routs of Iron Oxide
Effect of Phase Formation on Magnetism of Sol-Gel Derived PbTiO3/(Ni, Pb) Ferrite Composite Powders
Complex Impedance Spectroscopy of Bi-Substituted Yttrium Iron Garnet (YIG)
Application of Rare Earth Permanent Magnet on Magnetic Abrasive Machining
Growth and Characterization of BaZrO3 Buffer Layer for Textured YBCO Thin Films Growth on MgO (00l) Substrate
The Stability Range of Lead Oxide Compounds in Bi-System High Temperature Superconducting Materials
Synthesis of MgB2 from Anhydrous B2O3 by Ball Milling Method and Determination of Superconductivity Properties
CeO2 Buffer with (200) Preferential Orientation on R-Cut Sapphire by a Solution Deposition Technique
Preparation of BaRuO3 and BaIrO3 Films by Laser Ablation
Effects of Different Antimony Dopants on ZnO-V2O5 Based Varistor Ceramics
Fabrication of High Performance Multilayer ZnO Varistors with Chemically Synthesized Doped Zinc Oxide Powder
Effect of V2O5 Additive on the Microstructure and Electrical Properties of Mn-Co-NiO NTC Thermistor
Modification of Thick-Film Conductors Used in IP Technology for Reduction of Warpage during Co-Firing of LTCC (Low Temperature Co-Fired Ceramic) Modules
Morphologies and Microstructures of Antimony-Doped Tin Oxide Films Derived by Sol-Gel Dip-Coating Processing
The Optical and Electrical Properties of Antimony-Doped Tin Oxide Transparent Conducting Thin Films Prepared by Sol-Gel Dip-Coating Technique
Improved Electrodeposition of CuIn1-xGaxSe2 Films
Study of In2O3 Thin Films Prepared on TiN Substrates Using a Triethylindium and Oxygen Mixture
Resistivity-Temperature Properties of La(TixMn1-x)O3 Ceramics
Control of Shrinkage Behavior and Thermal Expansion Coefficient in BaTiO3-Added Ni Electrodes
Fabrication of Heater Element in Release System
A Novel Ceramic Pressure Sensor
Effect of Treatment Process on the Structure and Properties of Sr0.48Ba0.24Ca0.28TiO3-Based Varistor Ceramics
Microstructure and Properties of Ni0.5Zn0.5Fe2O4-BaTiO3 Ceramic
Dielectric Properties of LTCC System of Al2O3 and Borosilicate Glass
Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing
Effect of Raw Materials on the Thermal Conductivity and Microstructure of Aluminum Nitride
SrTiO3 Based Dual-Functional Ceramics with Nano-Additives
Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering
Preparation and Properties of Ni-Si-O Thin Film Prepared by Sol-Gel Method
Na-Site Doping of NaCo2O4 Thermoelectric Materials
Preparation and High Temperature Thermoelectric Properties of [Ca2(Co0.65Cu0.35)2O4]0.624CoO2 Compound
Large Thermoelectric Response of Ti-Containing Perovskite Oxides
Progress in Researches on the Layered Cobalt Oxides for Thermoelectric Devices
Modulated Structure of Bi1.8Sr2.0Rh1.6Ox
Preparation and Properties of Zinc Oxide and Titanium Oxide Ultra-Fine Composite Particles for Attenuation of Ultraviolet Radiation
Static and Dynamic Characteristics of Thermoelectric Ceramics
Synthesis and Thermal Properties of Nanoscale Skutterudite via Cross-Coprecipitation
Microstructure and Thermoelectric Properties of CoSb3 Synthesized by MA-SPS Method
Synthesis and Lattice Thermal Conductivity of Double Atoms Filling p-Type CamCenFexCo4-xSb12 Compounds
High Temperature Thermoelectric Property of Sr-Filled Skutterudite SryCo4Sb12
Influence of Extrusion Temperature on the Thermoelectric Properties of p-Type Ag Added (Bi0.25Sb0.75)2Te3 Alloys Prepared by MA-PDS
Preparation of AgxPbmSbTe2+m-Based Thermoelectric Materials by MA-SPS Method and Evaluation of their Thermoelectric Properties
Thermoelectric Properties of Ag1-xPbmSbTe2+m Compounds
High Temperature Thermoelectric Properties of AgPb18+xSbTe20
Annealing Effects on Powder Metallurgy Based Pb1-xSnxTe Materials for Thermoelectric Applications
Thermoelectric Properties of Bismuth Telluride Based Materials Prepared by Powder Metallurgy Processing
Electrical Properties of P-Type Thermoelectric AgxBi0.5Sb1.5-xTe3 (x=0.05‾0.4) Alloys Prepared by Spark Plasma Sintering
Template Synthesis of Bismuth Porous Films and Networked X-Shape Nanowires
The Influence of Oxygen on the Electrical Properties of Bulk and Thin Films of PbTe Semiconductors
Structural Evolution of Nb/NbC Multilayer Coatings
Heat to Electricity Conversion Efficiency Measurement for Thermoelectric Unicouple
High-Efficiency Thermoelectric Air-Conditioner
Novel High-Intensity Thermoelectric Generator and its Application on Hybrid Electric Vehicle
Preparation and Characterization of Sr, Ba Filled Type-I Ge Clathrate Single Crystals
Thermoelectric Properties and Mechanism on Porous Silicon Wafer
Structural and Optical Ceramics: Yesterday, Today, and Tomorrow
On the Progress of Combustion Synthesis of Si3N4 Ceramic: From Laboratory Research to Industrial Production
Fabrication and Characteristics of Al2O3/Cu Composite Particles by MA & PCS
Preparation of Submicron Silica Powders from Sodium Silicate Using Ultrasonic Energy
Preparation of Mullite Powder by Aluminum Sulfate and Silica in Molten Sodium Sulfate
Preparation of Ultrafine β-Sialon Powder by Citrate Sol-Gel and Carbothermal Reduction Nitridation
Preparation of (Ca+M) (M=Mg, Yb, Sr) Co-Doped α-SiAlON Powders by Combustion Synthesis
Preparation of Sialon Using Fly Ash with High Content of Al2O3
Combustion Synthesis of Magnesium Silicon Nitride Powders in the Mg-Si-N System
SiC Platelets Synthesized by Powder-Heating Technique
Synthesis of Sialon-Mullite Composites Using Fly Ash by Carbon-Thermal Reduction Nitridation
Carbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors via Sol-Gel Method
Large-Scale Fabrication of Ti3AlC2 Powder with High-Purity
Study of Ti3Si1.2-xAlxC2 (x = 0‾1.2) Solid Solution via X-Ray Diffraction
Mechanically Activated Low-Temperature Synthesis of Ti2SnC
Fabrication and Mechanical Properties of High-Pure Ti3SiC2 Bulk Materials Directly by Hot-Pressing its Powder
Surface Coating of Anhydrite Powders with CaCO3 Nano-Particles Prepared in Ca(OH)2-H2O-CO2 System
Tribochemical Effects of MoSi2 Powder in Ball Milling
Preparation and Characterization of Ca0.8Sr0.2ZrO3 Powders Prepared by Soft Chemical Route
Synthesis of Mixed Conducting Oxides SrFeCo0.5Oy Powder by Citrate Method
A New Homogeneous Precipitation Route to Ammonium Aluminum Carbonate Hydroxide
A Novel 3D Patterning Technique for Forming Advanced Ceramics
Application of Acetate Starch to Colloidal In Situ Consolidation Molding Process of Alumina Ceramic
Rheological Behavior of Alumina Aqueous Suspension for Extrusion Gelation Freeform Fabrication
Rheological Properties of Boron Nitride-Silica Composite Suspensions
Effect of Various Dispersants on the Gel-Casting of Silicon Nitride
Effect of SiC Powder Characteristic on the Rheological Properties of Feedstock
Simulation of Ceramic Injection Molding for Zirconia Optical Ferrule
Superplastic Deformation of Nano-Sized α-Sialon Ceramics
Forming of Large Thin Walled Fused Silica Shapes by Gelcasting
Study on Processing Parameters of Ceramic Injection Moulding
A New Dewaxing Method and its Effect on the Properties of Low-Pressure Injection Molded Ceramics
Injection Molding of Zirconia Ceramics Using Water-Soluble Binder
The Influences of Solid Loading and Molding Variables on Alumina Injection Molding
On the Defects in Injection-Moulded Technical Ceramics
Effects of Different Debinding Atmosphere on the Properties of Powder Injection Molded AlN Ceramics
Near-Net Shaping of Microwave Ceramics by Gel-Casting with Carrageenan
Extrusion Forming of Cordierite Honeycomb with Hexagonal Open Cells
Preparation of PZT Slurry with High Solids Loading and Low Viscosity for Gelcasting
Magnetic Alignments of Ba-Ferrite Particles in Suspension
Synthesis of Fine Grain Ti3SiC2 by Spark Plasma Sintering with Additive of Aluminum
Fabrication of TiAl Intermetallic by Spark Plasma Sintering
Spark Plasma Sintering of CBN-WC-10Co Composites
Preparation of Porous Alumina Ceramics by Spark Plasma Sintering
Comparison of Spark Plasma Sintering and Hot Pressing of MgAlON
Liquid Phase Sintering of α-Si3N4 by Spark Plasma Sintering
Effect of Aluminum on Fabrication of Ti3SiC2 by Mechanical Alloying and Spark Plasma Sintering
Liquid Phase Sintering Behavior of Amorphous Nano-Sized Silicon Nitride Powders
Microwave Sintering of Alumina-Silicon Carbide Nanocomposites
Fabrication and Characterization of Porous TiB2 Ceramic with Three-Dimensional Interconnected Skeleton
Synthesis of a Novel B3CN3 Compound by Pyrolysis of Precursor
The Effect of Diluent on Combustion Synthesis of Si3N4-SiC-TiN Ceramics with Small Diameter
Preparation of Porous Si3N4 Based Ceramics by Combustion Synthesis
Low Temperature Fabrication and Characterization of Porous SiC Ceramics Using Polycarbosilane as Binder
Processing and Characterization of Carbothermal Reduction and Nitridation from Kaolinite-Polyacrylamide Intercalation Compound
Fabrication of Reticulated Porous Ceramics with Controlled Structure by Centrifuging Process
Preparation of Porous Ceramic Support with Inorganic Filtration Membrane
Preparation of Porous Wollastonite Ceramics for Filtration
Fabrication of Porous Silicon Nitride with High Porosity
Properties and Application of Oriented Porous SiC as Transpiration Cooling Materials
Fabrication of Porous Cellular SiC Ceramics from Wood by Embedding in Si/SiO2 Powder Mixture
Study of Affecting Factors on Porosity in Gel-Casting Foam
Preparation and Characterization of ZrO2 Microspheres by Internal Gelation Process
Preparation and Microstructure of Bauxite Ceramic Microsphere
Homogeneity of Aqueous Al2O3/3Y-TZP Feedstock by Plastic Kneading
Effects of Adding Form of Additives on the Structure and Properties of High-Purity Alumina Ceramics
Preparation and Properties of Al2O3-Mullite-SiC Nano-Composite by Slip Casting in a High Magnetic Field and Reaction Sintering
Preparation of Zirconia-Toughened Alumina Ceramics through the Dispersal Basic Carbonate Precursors
Structural Characterization, Crosslinking and Pyrolysis Investigation of Carbosilane Oligomers
RB-SiC Ceramics Derived from the Phenol Resin Added with Starch
TiC/Ti Composite Layers Fabricated by Laser Surface Alloying
Fabrication of Lightweight SiC Space Mirror
Advanced Engineering Ceramics for Semiconductor Package Technology
Ultra-High Temperature Ceramics (UHTCs) via Reactive Sintering
Effects of Rapid Heat Treatment on Microstructure and Mechanical Properties of Ti2AlC/TiAl Composite
Microstructure and Properties of Carbon-Ceramic Composite Prepared by Hot-Pressing Sintering
Microstructural Evolution and Mechanical Properties in Yb2O3-Fluxed Silicon Nitride Ceramics
Processing and Properties of Highly Textured Si3N4 Materials
A Comparison Study on Microstructure and Mechanical Properties of Si3N4 Ceramic Prepared from MACS Powders
Microstructure of Different Rare-Earth-Doped α-Sialon Ceramics
The Influence of Sintering Process on the Microstructure of Submicron Alumina Fabricated by Gelcasting
Low Temperature Degradation of Yttria Stabilized Zirconia
Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature
Microstructure and Phase Composition of (Ce, Mg)-PSZ Ceramics
Microstructure and Mechanical Properties of Ce-Y-TZP Ceramic Composites for Ceramic Plunger and Ball Valve
Effect of HIP on the Properties and Microstructure of Transparent Polycrystalline Spinel
Processing of Zinc-Based MgAl2O4 Composite and Effect of Fly Ash Addition
A Study on Toughening and Strengthening of Mg-Al Spinel Transparent Ceramics
Study on the Properties of Alumina Ceramics after Implanted by Titanium Ions with MEVVA Sources
Microstructures and Mechanical Properties of Nano-Composite Ti(C,N)-Based Cermets
Preparation of Amorphous Si-B-C-N Powders and Nano-Sized Ceramics
Synthesis and Properties of Ternary Carbide Ti3AlC2 Ceramics
Preparation of ZnSe by CVD with the Solid Starting Materials
Novel Visible-Band Transparent Ceramic Laser Material Mn:MgAl2O4
Synthesis, Characterization of Perhydropolysilazane and its Application in the Preparation of 3D SiO2f/Si 3N4 Composites
Influence of Pressure on the Crystallization in SiO2f/SiO2 Composites
Ablated Transformation and Dielectric of SiO2/SiO2 Nanocomposites Dipped with Silicon Resin
Preparation and Property Study of 3D Cf/Si-Ti-C-O Composites Fabricated with Polytitanocarbosilane by PIP Process
Mechanical Properties of C/SiC Composites via Precursor Pyrolysis with Pretreated Carbon Fiber
Microstructure of Cf/SiC Composite with Precursor of Hexamethyldisilazane by Chemical Vapor Infiltration
Processing and Properties of 2D Cf/Si-O-C Composites Using Silicone Resin
Fabrication and Mechanical Properties of SiCf/SiC Composites via Polycarbosilane Pyrolysis
Fabrication of SiC/SiC Composites Using both Chopped Fiber and a Hybrid Reinforcement of Chopped and Continuous Fibers
Transient Liquid Phase Bonding of 2D Fiber Reinforced Carbon-Carbon Composites
Effect of the Formation of SiC Whisker on the Properties of Al2O3-ZrO2-C Materials
Dielectric and Mechanical Properties of Unidirectional SiC Fiber-Reinforced Aluminum Phosphates Composite
Microstructure of Pyrolytic Carbon Matrix in Carbon/Carbon Composites after Graphitization
Tensile Behavior of Aluminum Matrix Composites Reinforced by Aluminum Borate Whiskers and Magnetic Ceramic Particles
CNTs/Si3N4 Composites Fabricated by Reaction Bonded Processing
Phase Evolution of Aluminum-Chromium-Phosphate Binders during Heat-Treatment
Effect of PCS Pyrolysis Process on C Fiber in Cf/SiC Composite
Effect of Oxygen on the Mechanical Properties of Polymer-Derived Si-Al-C-O Fibers
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Cf/SiC Composites
Silicon Carbide Whiskers Synthesized by Double-Heating Technique
Composition, Structure and Properties of Low Oxygen Content SiC Fibers
SAXS Characterization of Nanochannels in Polymer-Derived SiC Fibers
Effect of Catalyst on the Preparation of Silicon Carbide Whiskers from Silica and Carbon
Synthesis of the Fiber Coating by FP-CVI Process
Microstructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPS
Preparation and Morphology of Mullite Whiskers by Sol-Gel Method
The Preparation of Fibrous MCM-41 Using Microwave Heating
Influence of Fabricated Process on Mechanical Properties of Porous SiC-Particle/Si3N4 Composites
Effect of Second Sintering on Intragranular Structure and Mechanical Properties of 10vol%Al2O3/3Y-TZP Composites
Synthesis of Aluminum Titanate Solid Solution by Solid State Reaction of Fine Commercial Al2O3, TiO2 and MgO Powders
Preparation of LiTaO3 Ceramic Powders
Effect of Aluminium Sol on Microstructure and Properties of Corundum-Mullite Ceramic
Fabrication of Al2O3-SiC-Mullite Composites from Fly Ash
Preparation of TiB2 Nanoparticles Reinforced Cu-Matrix Composite by Direct Combustion Synthesis
Preparation of Warm Compacted and Sintered WC/Carbon Steel Composite and its Wear-Resistance
The Preparation and Properties of Si3N4-Filled Epoxy Resin Composites for Electronic Packaging
Preparation and Properties of β-Si3N4/Epoxy Matrix Composite
Manufacturing of Polymer Matrix Composite Material Using Marble Dust and Fly Ash
Performance Analysis and Experimental Verification for FBG Sensors Applied for Smart Structure
Multilayer SiC/Si Composites Derived from Papers
An Investigation of the Reaction Hot-Pressing Synthesis of MoSi2/Ti3SiC2/Al Composites
Reaction Path and Microstructures of Ti3SiC2/SiC Composite by Spark Plasma Sintering
Interformational Exfoliation of Ti3Al2 Induced by Cu
The Reaction between Ti3AlC2 and Cu in the Synthesis Process of Cu/Ti3AlC2 Composites
High Performance Composite of Silicon Carbide/ Bismaleimide
In Situ Formation of TiC Reinforced Intermetallic-Matrix Composite Layers Produced by Laser Cladding
Effect of Ti3SiC2 Content on Mechanical Properties of Ti5Si3-TiC-Ti3SiC2 Composites
Slip Casting of Green Compact of SiAlON Multiphase Ceramics from River Sand
Steel-Bonded Cemented Carbide GT35 by In Situ Reduction of Natural Ilmenite
Unusual Microstructures and Strength Characteristics of Cu/Ti3AlC2 Cermets
Reaction Synthesis of TiAl-Al2O3 Composite
Synthesis and Structure of Sol-Gel Derived PST/Bi2Ti2O7 Composite Thin Films
Preparation and Characterization of Copper-Coated Alumina Powders
Manufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ Composites
Microstructure and Mechanical Properties of Heat-Resistant Silicon Carbide Ceramics
Defect and its Influence on Mechanical Property of Titanium Diboride-Copper Matrix Composite
Mechanical Properties of Al2TiO5 Ceramics
High Temperature Creep Strength of Si3N4-Y2Si2O7 Ceramics by Stress Relaxation Based on a New Interpretation Model
Mechanical Properties and Microstructure of Al2O3-TiC Composite by Hot-Pressing
Preparation and Properties of BN-SiO2 Composite Ceramics
Spark Plasma Sintered ZrO2(Y2O3)-Al2O3-SrSO4 Self-Lubricating Nanocomposites for High Temperature Tribological Applications
Effect of Y2O3 on Properties of Al/Ti3SiC2 Composite
A New Ti3AlC2/Cu Cermet Exhibiting Excellent Tribological Properties
Effect of Micro-Pores after Sintering on Wear Behavior of Zirconium Silicate Composite Microbeads
Fabrication of TiC Particles Reinforced Hadfield Steel Matrix Composite and its Wear-Resistance
Plating Copper on Al2O3 Powder in Ceramal
A Study on the Grinding Performance of Y-TZP/Al2O3 Ceramics
Precision Machining of Si3N4 Refrigerator Friction Couple Based on FEA
Grinding of TZP/Al2O3 Composite with Vitrified CBN Wheels
High Speed Lapping of SiC Ceramic Material with Fixed Abrasive
Micro Groove Machining Characteristics of Si3N4-hBN Composites
Wear Characteristics of Twist Drills in Machining Fluorophlogopite
Surface Behaviors of ELID Ground Engineering Ceramics
In-Process Electrolytic Dressing Lapping (IEDL) of Al2O3-BN Machinable Ceramics
Fabrication of SiCN MEMS by UV Lithography of Polysilazane
Thermodynamic Properties of Gangue
Properties of Sol-Gel Bonding Castables
Fabrication and Characterization of Mullite Whisker-Reinforced Porous Refractory
Colloidal Processing of Alumina-Carbon Ceramic Refractories
Densification of Unfired Alumina Refractories by the In Situ Spinel Formation during Application
Preparation and High Temperature Performance of β-Sialon Bonded Corundum Multiphase Material
Fabrication of Fe-Al Intermetallic/TiC-Al2O3 Ceramic Composites from Ilmenite by Reaction Sintering
Preparation of Nanoporous Super Thermal Insulation Material Compounded with Xonotlite-SiO2-Aerogel and Characterization of the Pore Structure
Synthesis and Properties of Silica Aerogel by Using Acid Silica Sol and TEOS as Silicon Sources
Thermal Shock Resistance and Ablation Behavior of TiB2-Cu-Ni Composite via Combustion Synthesis
A Novel Approach to Prepare Ni-Coated TiB2 Cermet
Microstructure and Properties of (Ti,W)(C,N)/(Ni,Mo) Cermets after a Heat-Treatment at High Nitrogen Pressure
Effect of Cr2C3 Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets
Residual Stress Field of Ellipsoidal Ceramic Particles Ni-Base Alloy Composite Coating
FEM Analysis on Thermal Stress of Desulphurization Injection Lance
Investigation on the Porous Biomaterial for Bone Reconstruction with Addition of Bio-Mimetic Nano-Sized Inorganic Particles
Inhibitory Effect of Synthetic Nano-Hydroxyapatite on Dental Caries
Apatite Formation on the Surface of Dense HA/TCP in Animals' Serums
In Vitro Degradation of β-TCP/PLLA Scaffolds with Different Proportions of β-TCP
Application of Multilayer Collagen/HA Scaffold in Cartilage Tissue Engineering
AFM Study on the Surface Dissolution of Hydroxyapatite
Solution Behavior of CaO-MgO-SiO2 System Bio-Soluble Refractory Ceramic Fibers
The Interface Reaction between an Ag+-Doped TiO2 Film and Stainless Steel Substrate
Preparation of Antibacterial Ceramics with Silver-Carrying Nano-Hydroxyapatite
Effect of Reaction Conditions on Pore Configuration and Mechanical Property for Porous Hydroxyapatite Prepared by Polymer Sponge Method
Factors Affecting the Pore Size in Porous Hydroxyapatite Produced by Stir-Froth-Polymerization Method
Biomimetic Fabrication and Characterization of BG/COL/HCA Scaffolds for Bone Tissue Engineering
FCVA-Synthesized Tetrahedral Amorphous Carbon Films for Biomedical Applications
A Study on Biomineralization Behavior of Silk Fibroin Film
MicroCT Aided Scaffold Design and Preparation
Mechanical Properties of Machinable Zirconia Dental Composites
Microstructure and Crystallization Behavior of Glasses in the ZrO2-ZnO-Al2O3-SiO2 System
Low-Temperature Sintering of 3Y-TZP/Glass Composites as All-Ceramic Dental Materials
Structure and In Vitro Bioactivity of Si Enriched Hydroxyapatite/TiO2 Coatings on Pure Titanium by Micro-Arc Oxidation
Microstructure Analysis of a Composite System Composed of Zirconia/Alumina Composites and Vita Alpha Coating-Glass for Dental Applications
Effect of Surface Roughness on Matching Properties between Ceramic Framework and Coating-Glass for Dental Applications
Effect of CNTs on Property of Calcium Phosphate Cement
Preparation of Unsintering Calcium Phosphate Macroporous Materials with Hydroxyapatite Nanowhisker In Situ Growth
Porous Hydroxyapatite Bioceramics Prepared by Polymeric Sponge Impregnation Process
Self-Setting Biphase Porous Calcium Phosphate Cement
Characterization of Porous Calcium Phosphate Bioceramics Modified by Porosifier
Effects of Setting Liquid on α-Calcium Phosphate-Tetracalcium Phosphate Bone Cement
In Vivo Behavior of Injectable Fast-Setting Calcium Phosphate Cement
Improvement of Anti-Washout Performance of Calcium Phosphate Cement Using Modified Starch
Electrochemically Assisted Co-Precipitation of Electrically Conducting Polymer with Calcium Phosphate Coatings on Ti Alloys
Degradation Behavior of Calcium Sulfate/β-Tricalcium Phosphate Composites in Tris
Exploring the Osteoinductivity of Calcium Phosphate Ceramics/PLA or Collagen Composites
Preparation of β-TCP/HAP Composite Bioceramics
Preparation and Characterization of Biodegradable β-TCP-Based Composite Microspheres as Bone Tissue Engineering Scaffolds
Degradation Behavior of β-Ca3 (PO4)2/β-Ca2P2O7 Bioceramics
Physicochemical and Mechanical Properties of Composite of Chitosan Microspheres/Calcium Phosphate Cement
Rheological Properties of an Injectable Calcium Phosphate Bone Cement and their Relationship with the Phase Evolution
Repairing the Dog's Femoral Defect with the Autologous Osteoblast Integrated the Nano-Calcium Phosphate/Zirconia Scaffold
Bone Formation in Non-Osseous Tissues of Biphasic HA/β-TCP Bioceramics Sintered by Different Ways
Hydroxyapatite Coatings Deposited on Titanium Substrate by Pulsed Laser Deposition
Preparation of Bioactive β-Tricalcium Phosphate Scaffold with Bone-Like Structure
TEM Analysis on Bio-Functional Gradient Hydroxyapatite/ZrO2 Coatings
Improvement of Biocompatibility and Osteointegration of Zirconia Implants by Means of Bioactive Glass Coating: An Experimental Study in Animal
Bioactive Ceramics - New Processing Technologies for Immobilization of Microorganisms for Filtration and Bioreactor Applications
Preparation of Biphasic Calcium Phosphate Porous Ceramics Prepared from Fine Powders with Different Particle Size and its Dissolution Behavior in Simulated Body Fluid
Apatite Forming on the Surface of Apatite-Wollastonite/β-Tricalcium Phosphate Bioactive Ceramic
Simulation In Vitro of Subsonic Flame Sprayed Titanium/Biological Glass Composite Coating
Biomimetic Synthesis of PEC-HA Composite Analogous to Bone
Development of Ultrafine Fibrous Hydroxyapatite/Polymer Scaffold by Electrospinning
Experimental Study of Biomimetic Mineralization on the Surface of Piezoelectric Pulp-Cap Film
Bisphosphonate Pamidronate Modifying Hydroxyapatite Bioceramics for Hard Tissue Repair
Microstructure and In Vitro Bioactivities of HA/Ti Composites Prepared by Hot Isostatic Pressing
Improvement in the Sensitivity of the Response of Diamond Thin Films to X-Ray
Microstructure of Ceramic Layer in Composite Pipe Made by SHS-Gravitational Process
Microstructure and Properties of In Situ Synthesis of TiC Particle Reinforced Composite Coating by Induction Cladding
Adhesion of Diamond Film to Co- Deficient Cemented Tungsten Carbide Substrate
Wear Behavior of Plasma Sprayed Ni-WC Composite Coatings
Microstructure and Dry Sliding Tribological Behavior of Microarc Oxidation Coating Formed on Ti6Al4V against Steel
Preparation of DLC Scratch-Resistant Coating on PC Glass Lenses
Micro-Tribological Behavior of Boron Carbide Self-Mated Pairs
Frictional Performance of Brake Pads against Al Metal Matrix Composites with Different Sizes of SiC Particles
Effects of Pre-Oxide Layer Thickness on Thermal Cyclic Behavior of Thermal Barrier Coatings
Cyclic Oxidation Behavior of Thermal Barrier Coatings in Environments Containing Water Vapor
Design and Properties of Fire-Proof Coating for Tunnels
Influence of Infiltration Additives on the Phase, Microstructure and Oxidation Resistance of SiC Coating for Graphite Materials
Thermal Cycling Behavior of Lanthanum-Cerium Oxide Thermal Barrier Coatings Prepared by Air Plasma Spraying
A Promising Sm1.9Ca0.1Zr2O6.95 Ceramic for Thermal Barrier Coatings
Low Thermal Conductivity Ceramics for Thermal Barrier Coatings
Fabrication and Isothermal Oxidation Behavior of the Co-Deposited EB-PVD (NiAl + YSZ) Coating
A Comparative Study of Two-Layer NiAl Bond Coat TBC and its Failure Mechanism
Thermophysical Properties of Samarium-Cerium Oxide for Thermal Barrier Coatings Application
A Comparison of the Surface Properties of DLC and Nanocrystalline Diamond
Influence of Impurities on the High-Temperature Water-Vapour Corrosion of Environmental Barrier Rare-Earth Silicates
Analysis of Heat Transfer and Thermal Stress in Thermal and Environmental Barrier Coatings
Investigation of YSZ Thin Films on Silicon Wafer and NiO/YSZ Deposited by Ion Beam Sputtering Deposition (IBSD)
Influence of Agglomerate Size on the Properties of Al2O3-Al2Cu3 Multiphase Ceramic Coatings
Effect of Heat Treatment on Coloration of Ag Doped TiO2-SiO2 Films
Photo-Hydrophilicity and Photo-Catalysis of TiO2-SiO2 Coating on Ceramics
AFM Investigation of Nano Particle Incorporated Sb Doped SnO2 Films
Development and Characterization of Nano-TiO2/HA Composite Bioceramic Coating on Titanium Surface
Interface Biomechanical Properties between Femora and Bioactive Ceramic Coatings Prostheses during the Initial Implant Stage
Two-Steps Digital Image Correlation and Application to Studies of Micromechanics Behavior of Coating Interface
Adsorption of Human Serum Proteins on Carbonaceous Materials
Thermal Shock Experiment and Simulation of Ceramic/Metal Gradient Thermal Barrier Coating
Mechanisms and Kinetics of Silica-Rich Binary Na2O-SiO2 Glass Corrosion in 100oC Water at pH=7
Effect of Heat Treatment on the DC Conductivity and Activity Energy of Li2O-Fe2O3-P2O5 Glasses
Crystallization of a SiO2-MgO-Al2O3-K2O-Fe2O3-F Glass
Making Fluorophlogopite Ceramics through Ceramic Processing
Preparation of Decorative Building Glass-Ceramics by Using Cracked-Glass Panel as Precursor
Sintering and Crystallization of Glass-Ceramics for Optical Fiber Ferrule
Manufacture Process of Light Calcium Carbonate from Limestone
Upconversion Emission of Infrared Excited Er3+-Doped Transparent Glass Ceramics Containing CaF2 Nano-Crystals
Structuration and Fabrication of Sensors Based on LTCC (Low Temperature Co-Fired Ceramic) Technology
Fabrication of Ba-Ti-B-Si-O Glass-Ceramics for LTCC
Crystallization of Cordierite-Based Glass-Ceramics Adding with Fe2O3-TiO2
The Influence of Li+ on the Sintering of Cordierite Glass Ceramic
Composition and Properties of the LZS Glass-Ceramics Used as Anodic Bonding Material
Preparation of SiO2-TiO2 Films of High Photo-Catalytic Activity in the Electric Field Heating-Treatment
Sintering AlN Ceramics Below 1500oC with MgO-CaO-Al2O3-SiO2 Glass Addition
Synthesis of Glass Ceramic from Goldmine Tailings
Method for Estimating the Critical Cooling Rate for Glass Formation from Isothermal TTT Data
Effect of Phenolic Resin on the Basic Properties of Woodceramics and Biomorphic SiC Ceramics
Manufacturing Process of Activated Magnesia from Bittern and Dolomite
Activated Alumina Adsorbent Developed from Waste Aluminum Sludge
A New Method for Effective Utilization of Melted Solid Waste
Development of Glass Ceramic by Sintering and Crystallization of Glass from Phosphorus Slag
Sialite Technology and Cycle Economy
Preparation and Characterization of Porous Cordierite Ceramics from Coal Fly Ash
Photo-Catalytic Properties of Ceramic Coating of TiO2
Microporous Ceramics Made by Silicon Carbide Whiskers
Clay Minerals as a Feasible Additive to Stabilize Cadmium in Contaminated Soils
Preparation and Photocatalytic Performance of Ag-Doped Titanium Dioxide Whiskers
A Novel Hydroxyapatite Carrier for Enrichment of Hydrocarbon Degradation Bacteria
Practice of Simulation to Formation of Rock Theory
Effect of Deposition Conditions on TiO2 Thin Film on Silica Glass Fibers by Liquid Phase Deposition
Effects of Boron-Doped on Photocatalysis and Hydrophilicity of TiO2 Film
Preparation of Sialon from Solid Wastes by Colloidal Process
Oxidation Resistance of Mild Steels Coated with Ce4+-Modified TiO2 Nanofilms
Hierarchically Nanostructured Porous Functional Ceramics
Preparation and Photocatalytic Property of Platinum-Modified TiO2 Ceramic Film Using Different Compound Techniques
Preparation and Photocatalytic Properties of Nanosized La3+ and Co2+ Co-Doped TiO2 by Microemulsions
Preparation of Rare-Earth Element Doped Titanium Oxide Thin Films and Photocatalysis Properties
Influence of La3+ Ions on the Photo-Catalytic Activity of TiO2 Films Prepared by Micro-Plasma Oxidation Method
Dispersion and Electrophoretic Deposition of Titania Particles
Photo-Catalytic Activity of Fe3+/Sn4+ Co-Doped Titanium Dioxide Nano-Crystalline Thin Films for Methyl Orange Degradation
Preparation of TiO2/SiO2/(γ-Fe2O3-SiO2) Magnetic Photocatalyst
Preparation of N-Doped TiO2 Photocatalytic Paint and its Sterilization Performance under Visible-Light Irradiation
Factors Influencing the Photocatalytic Efficiency in the Experimental for the TiO2 Powder Slurry Systems
Photocatalytic Degradation of Methylene Blue Aqueous Solution under Visible Light Irradiation by Using N-Doped Titanium Dioxide
Growth of TiO2 Thin Film on Glass Substrate by Air-Opened MOCVD
Preparation of WOx-TiO2 and the Photocatalytic Activity under Visible Irradiation
Photocatalytic Degradation of Methyl Orange on ZnO in Aqueous
Photocatalytic Properties of Nanocrystalline Tin Oxide Synthesized by Using Molten Boric Acid as a Flux
Effects of Heat Treatment Temperature on the Photocatalytic Properties of TiO2 Prepared by Melt-Phase Separation Process
Effect of CeO2 Supports on CO Oxidation Activity of Pd-Cu Catalyst
Synthesis and Catalytic Activity Studies of V/K/Ca and V/Ks/Ce Based Catalysts for Diesel Soot Oxidation
Preparation of Nanosized Ca-Zn Ferrite Particles by a Sol-Gel Method and its Magnetic Properties
Synthesis of Bi4-xYbxTi3O12 Nanopowders by a Modified Sol-Gel Process
Synthesis of Ce0.8Gd0.05Y0.15O1.9 Nanopowders
Nano-Scaled Anatase Phase Titanium Oxide Converted from Ammonium Oxotrifluorotitanate Prepared by Aqueous Solution of Ammonium Hexafluorotitanate and Boric Acid
Effect of Low Frequency and Power Ultrasonic Treatment on the Surface Adsorbed Organics and Visible Light Photocatalysis Activity of Nanosized TiO2 Photocatalyst
Effect of Drying Methods on Photocatalytic Activity of Nanosized Titanium Dioxide
Preparation of Nanosize Anatase TiO2 Powders by Hydrothermal Synthesis
Synthesis of VO2 Nanocrystalline via Hydrothermal Method
Synthesis of LaMnO3 via a Mechanochemical Activated Process
Synthesis and Characterization of Regular Hexagonal NiCo2O4 Nanosheets
Preparation and Characterization of CdSe Synthesized from Non-Aqueous Media
Preparation and Characterization of CdSe Nanoparticles Prepared by Using Ultrasonic Irradiation
Synthesis of Hollow Sphere CdSe from CdCl2 Aqueous Solution Containing Ethylenediamine
Preparation and Characterization of Gallium-Doped Zinc Oxide Nanopowders with High Electrical Conductivity
Preparation of Conductive Composite Particles by Impact Coating Process
The Preparation of Alumina Nanopowders from Solution Derived Precipitates through Polymer Gel Method
Preparation of Nanoscale High-Purity α-Alumina Powders
Effect of Phase of YAG Powder Synthesized by Co-Precipitation on Transparent Ceramic Sintering
A Novel Preparation Route of YAG:Ce via Polymer Gel Precursor
A Novel Non-Aqueous Solvent Chemical Process to Synthesize Nano-ZrO2
Preparation of Pottery from Shale
Effect of Novel Bivalent Mineralizers on the Synthesis of Nano-Sized Y2O3 Doped ZrO2 Powder by Hydrothermal Method
Coloring Mechanism of Pr-CeO2 Nano-Crystalline Red Lanthanide Pigments Prepared by Low-Temperature Combustion Synthesis
Preparation and Thermal Decomposition Mechanism of Zn2+-Doped Mg,Al-Hydrotalcite Nanocrystalline
Photoluminescence and Structural Properties of Si Nanoparticles Embedded in SiO2 Matrix by Reactive RF Magnetron Sputtering
Preparation and Synthetic Mechanism of Silicon Carbide Nanometer Whiskers
Synthesizing Nano-Scale Titanium Nitride Powders by Solvothermal and Carbothermal Methods
Preparation and Some Properties of Ni-TiN and Ni-TiC Nanocomposite Particles by DC Arc-Plasma
Synthesis of WC Nanosized Powder by the Plasma Arc Discharge Process
Preparation and Property of Self-Dispersed Nanometer γ-AlOOH
Influence of Ultrasonic Irradiation Power on the Synthesis Kinetics of Nano-Hydroxyapatite Prepared by a Wet Chemical Process
Effects of Acidic Amino Acids on Hydroxyapatite Morphology
Surface Nano-Particle Coating of Fly Ash
Microstructure and Mechanical Properties of Silica Xerogels Doped with SiC Whisker and Short Carbon Fiber
Preparation of Nanocrystalline Nickel Powders by Chemical Reduction in Nonaqueous Media
Preparation and Characterization of Nano-Sized Ni Powders inside a Nonionic Polymer Network
Preparation of Nano-Ag Particles and Antibacterial Dope Loaded Silver
Effect of Dispersant on the Particle Size Distribution of Cu Powders Prepared by Wet-Reduction Process
Growth of Oxide Nanorod, Nanotube and Nanocable Arrays through Template-Based Sol Electrophoretic Deposition
One-Dimensional Oxide Nanomaterials through Rheological Self-Assembling
Synthesis and Electrochemical Properties of V2O5 Nanostructures
Catalyst-Assisted Pyrolysis of Polymeric Precursors: A New Method to Synthesize Low-Dimensional Nanomaterials
Corrosion Resistance Properties of Carbon Nanotube Reinforced Electroless Composite Coating
Self-Assembled Monolayer of Silver Nanorods for Surface-Enhanced Raman Scattering
Synthesis and Characterization of La2(MoO4)3 Microcrystals via Hydrothermal Microemulsion
Synthesis of Yttrium Oxide Hydroxide Nitrate Nanorods by Hydrothermal Method
Preparation of PPy Nanowires and its Amperometric Response to Nitrate
Structural and Optical Properties of Lead Titanate Nanowires Synthesized by Hydrothermal Method
SnO2 Nanowires with Branched Structures Synthesized by Thermal Evaporation of Sn Powders
Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition
Synthesis and Characterization of Boron Carbide Nanobelts
Large-Scale Fabrication of ZnO Hexagonal Rods Arrays by a Simple Chemical Solution Method
Luminescent Properties of Aluminum Doped Zinc Oxide Nanofibers Prepared by Electrospinning
Influence of pH on the Morphology of Yttrium Oxide Hydroxide Nitrate Nanocrystal
Fabrication of LaNiO3 Chain-Like Ceramics from Nanocable Precursors
Preparation and Characterization of Cerium Hydrate Fiber
Preparation of a Novel Carbon Nano-Material Studded Iron Granules from Needle Coke by Arc Method
Synthesis and Characterization of Refluxed Sols and TiO2 Thin Films Using TiOSO4
Preparation of TiO2 Nanocrystalline Films by Electrophoretic Deposition and their Application in Dye-Sensitized Solar Cells
Dye-Sensitized Nanocrystalline TiO2 Ceramic Film and its Photoelectricity Property
In Situ Template Synthesis of TiO2 Nanotube Array Films
Anticorrosion Behaviours of the TiO2 / WO3 Composite Photoelectrodes for 304 Stainless Steel
Hydrothermal Conversion Deposition of ZnFe2O4 Doped TiO2 Thin Films and their Photovoltaic Response
The Photo-Induced Cathodal Protection of 304SS with Graded Bandgap Ferrite/TiO2 Nanostructures
Microstructure and Resistivity of Iridium Oxide Thin Films by Pulsed Laser Deposition Technique
Effects of Nanosized Iron Oxide with Different Morphology on Nanomechanical Properties of Nanocomposite Coating
Transparent and Compact Zinc Oxide Thin Films via Two-Step Electrodeposition from Aqueous Solution
Microstructure and Mechanical Properties of Cr-C-N, Cr-Si-N and Cr-Si-C-N Coatings by a Hybrid Coating System
Structure and Optical Properties of Si Films Deposited by Inductively Coupled Plasma CVD at Room Temperature
Microstructure Control and Phase Structure Study of Porous Alumina Membrane
Fabrication and Characterization of the Multilayer Film Containing Polyoxometalate with Pendant Support-Ligand
Surface Morphology of Thin Film Deposited on Rotating Substrate by EB-PVD
Nanocomposites - Toughened Ceramics
Multifunctional BN/Si3N4 and TiN/Si3N4 Nanocomposites Prepared by In Situ Nitridation Method
Microstructure and Mechanical Properties of SiC-Al2O3 Nanocomposite Prepared by Surface Modified SiC Nanopowders
Preparation and Properties of Al2O3 Particle Dispersed 3Y-TZP Nanoceramics Doped with TiO2
Microstructures and Multi-Toughening of ZrO2 Nano-Micron Fibers Self-Toughening Al2O3 Ceramics from In Situ Growth in the Melts Produced by Combustion Synthesis
Microstructures and Properties of Al2O3/ZrO2 Composite Ceramics from In Situ Growth in the Melts Produced by Combustion Synthesis
From Kaolins (with Addition of Al2O3) to Mullite Composite Nanocrystals: Experiments and Analysis
Spectroscopic Study of Rod-Like Mesoporous ZnO-SiO2 Composites
Role of Amorphous Silicon Carbide in Microstructure and Mechanical Properties of nc-TiC/a-SiC Nanocomposite Coatings Prepared by PECVD
Preparation and Characterization of CdSe/SiO2 Nanocomposites by Sol Gel Method and In Situ Growth
Properties of Nano-Hybrid Sol-Gel Materials Synthesized from Colloidal Silica-Silane Containing Epoxy Silane
Preparation and Structural Characterization of SiO2-ZrO2 Aerogels
Synthesis and Structural Characterization of SiO2-Al2O3 Xerogels
Influence of Binder Additives on the Sintering of Nano-3Y-TZP
Sintering Behavior of Pure and Nb-Doped BaTiO3 Powder Prepared by High-Gravity Reactive Precipitation
Preparation of MgAl2O4 Transparent Nano-Ceramics and their Light Transmission Properties
Processing and Properties of Nanocrystalline Tetragonal Zirconia
Analysis of the Surface Adsorbed Organics of Nanosized TiO2 Photocatalyst with High Visible-Light Photocatalysis Activity by Ultrasonic Treatment under Water and Ethanol Solution
Low-Temperature Synthesis and Micro-Morphology Observation of Transparent MgAl2O4 Nano-Ceramics
Evaluation of a Shoe Cushioning System Using Shock Absorber by Biomechanics
Phase Transformation Behavior of ZrO2-TiO2 Thin Films in Electric Field
Phase-Transformation Kinetics of TiO2 in TiO2/(O'+β')-Sialon Multi-Phase Ceramics
Effect of Er3+ Doping on Crystallization of PbF2-SiO2 Based Bulk Xerogels
Phase Evolutions of High Energy Ball Milled Ni-66.7at% Si
Thermal Expansion Behavior of Solid Solution Y1.9R0.1Mo4O15 (R = Sm, Nd, Dy)
Thermal Expansion Coefficients of Sm2Zr2O7 Doped with MgO
Improved Stability of Mn-Doped WO3 Varistor via Doping Cr2O3
Effect of the Addition of Ti3+ into TiO2 Film on the Performance of Dye Sensitized Solar Cells
Reaction Process of Al-TiO2-C-Ti-Fe Multiphase System during Combustion Synthesis
Sintering Behavior of Fe-Si Composite Powder by DPR Technique
Reaction Process of Al2(1-x)MgxTi1+xO5 Composite Powder by Chemical Co-Precipitation and Subsequent Sintering
Preparation and Investigation of TiO2 Sol Containing Nanometer Anatase Crystalline Grains
Pressure Sensitivity of SiC/Cu Composites Prepared by SPS
Sintering Kinetic of Fine α-Alumina Powder with ZrO2 Impurity
On the Grain Size Distribution of MnO Doped ZnO Ceramics
Effect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite Ceramics
Kinetics Model for the Initial Stage of Spark Plasma Sintering
Study on the Critical Time and Diffusion Coefficient in Grain-Boundary Segregation of Phosphorus
Fabrication of Highly Microstructure Controlled Ceramics by Novel Colloidal Processing
Shrinkages during from Liquid to Solid in Colloidal Forming
Suspension Characteristics and Rheological Properties of Aqueous Alumina/Zirconia Freeze Casting Slurries
The Stability of TZP-YSZ Binary Suspensions
Silicon Nitride Ceramic Prepared by Colloidal Process
Mechanical Properties of Filler Metal in Si3N4/Austenitic Stainless Steel/Si3N4 Joints as Measured by Nanoindentation and its Relationship to the Interfacial Strength
Joining of SiC Ceramic by High Temperature Brazing Using Ni-Cr-SiC Powders as Filler
Joining of SiC Ceramic by Hot Pressing Reaction Joining Process Using Ni-51Cr Powders as Filler
Fractal Dimension of Al(OH)3 Particle and Fractal Simulation of Boundary Micro-Topography
Evaluating Mechanical Properties of Ceramics by Relative Methods
The Compressive Strength of Ceramic Microbeads
Spherical Indentation on Glass-Coated Al2TiO5-Mullite Composites
Indentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte Material
Description of the Nanoindentation Unloading Behavior of Brittle Ceramics with a Modified Surface
Cyclic Fatigue of Alumina Ceramics as Evaluated by Modified Small Punch Tests
Dynamic Fatigue of Y-TZP Ceramics at the Room Temperature
Cracking Stress of Nano-Fibers Composite Ceramics
Experimental Study of Micro Displacement Field of Microstate of Crack Tips of Ceramics Plasticized with Zirconia and Stabilized by Yttrium Oxide - Application of Digital Image Correlation Method Based on Analysis by Scanning Electron Microscope
Lower and Upper Bounds of Mechanical and Thermal Properties of Ceramic/Metal Composites
Fracture Enhancement of Mixed Mode I-II Transformation Toughened Ceramics
Crack Healing, Reopening and Thermal Expansion Behavior of Al2TiO5 Ceramics at High Temperature
Corrosion Resistance of the Ceramic Coating Formed by Micro-Plasma Arc Oxidation on AZ91D Alloy
Influences of Duty Ratio on Structure and Corrosion Resistance of Ceramic Coatings on Ti-6Al-4V by Micro-Plasma Oxidation

Preparation and Wet Erosive Wear Characteristics of Porous Al2O3 Ceramics
Erosive Wear Performance and Mechanism of Engineering Ceramic Materials
Erosion Wear Characteristics and Mechanism of Si3N4 Ceramics: Effect of Impact Angle
Effect of Testing Parameters on Wear Properties of Alumina Strengthen 3Y-TZP Ceramics
Dry Friction Behaviour of Reaction-Bonded Silicon Carbide at High Temperature
Wear Mechanism of Ceramic Microbeads as Grinding Media
Oxidation Behavior and Mechanical Property of Si3N4 Ceramics with Rare Earth Oxide Addition
Influences of Calcination Ambiences on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti-6Al-4V Alloy by Micro-Plasma Oxidation
Geometric Design of Cycloidal Drives with Ceramic Ball Meshing Elements
Design of Ceramic Composite Based on the Impact Resistance and its Machining Application
Parallel Simulation of Ceramic Grain Growth on the Platform of MPI
Quantitative Evaluation for New Bone Growth of Bone Repairing Biomaterial Based on Color Image Segmentation
Application of Improved BP Neural Network in the Preparation Processing of the SrTiO3 Nanocrystalline
Finite Element Method for Thermal Analysis and Ablative Calculation of Heat Protection Materials
Lifetime Control and Prediction of ZrO2/CePO4 Composites
First-Principles Study of Nonmetal-Doped Titanium Oxides
First Principle Study on Electronic Structure of Nanocrystalline BaTiO3 Ceramics
A Method to Evaluate the Elastic Properties of Ceramics-Enhanced Composites Undertaking Interfacial Delamination
First-Principles Calculations on Crystal Structure and Thermodynamic Properties of Ceramics
Adsorption of the Au Atom on Si(001) Surface
Area-Perimeter Relation of the Grains in Stabilized Cubic Zirconia
Effective Stiffness of Nano and Transformation Composite Ceramics
Lambdoidal Layup of Aragonite Sheets in Conch Shell
Serial Simulation of Ceramic Grain Growth Based on Ternary-Tree Structure and Space Partition
Electronic Structure Study of Ni/Al2O3/Ni from First-Principles
Assessment of the Surface Morphology of Diamond Film Based on Fractal
Effects of Ceramic Fillers on Light Reflectance and Arc Resistance of PTFE for Circuit Breaker
Preparation of Yellow Color Pearlescent Pigments of CeO2-Mica
Study of Carbonizing Processes for Sintered Dolomite
Preliminary Analysis of the Citations to Articles Published in Two Academic Journals
Grain Characteristics of Nanocrystalline ZrO2 Powders
Analysis of Capacity to Make Profits in Chinese Listed Ceramic Companies
Structural Micro-Layered Ceramics with Surfaces under Tension and Compression with Increasing Apparent Fracture Toughness
Research on Morphology and Phase Structure of Al/Cu Interfaces Formed by Explosive Cladding
Fabrication of Layered Ti3SiC2/α-SiAlON Material
Microstructure and Optical Characterization of Au/SiO2 Nano-Composite Multilayer Films
ZrO2-Ni Functional Gradient Bonding Interlayer
Microstructure and Mechanical Properties of Freeze Cast Alumina/Silicon Carbide Layered Composites
Mechanical and Electrical Properties of Boron-Oxygen-Nitrogen Film as Buffer Layer
Characteristics of Surfactant-Zirconium Phosphate Composites with Expanded Interlayer Separation
Resistance of the Transitional Region of Laser-Clad Coating on Electrolytic Low Titanium Aluminium Alloys to Multiple Impact Loading
Development of Functionally Structured Materials: Ceramic Photonic Crystals and Fractals
Functionally Graded Thermoelectric Materials
Microstructure and Properties of WCP Reinforced Ferrous Gradient Composites
Functionally Graded Piezoelectric Ceramics for Ultrasonic Transducers
Preparation of Functionally Graded Cu/AlN/Cu Electrode Materials for Thermoelectric Devices
A New Silver-Based Graded Composite as Electrical Contact Material
Bending Behavior of Functionally Graded Piezoelectric Laminated Actuators under Electric Fields
Thermal Shock Behavior of Nano-Structured Functionally Graded Thermal Barrier Coatings Deposited by Supersonic Plasma Spray
Numerical Simulation Method of Heat-Resistant Hetergeneous Graded Ceramics Structure on Vehicle
Experimental Study and Modeling of a Differential SMA Spring Actuator
Microstructure and Dielectric Properties of LiTiNiO Thin Films
Effect of Ti Content on Microstructure and Dielectric Properties of Li and Ti Co-Doped NiO Thin Films
Fabrication and Characterization of Ceramic/Metal Gradient Thermal Barrier Coating
Microstructure and Corrosion Behaviour of Ni/Al-Al2O3 Gradient Ceramic Coatings on Q235 Steel
Macro-Residual Stress in 304 Stainless Steel Coated with ZrO2-CeO2 Thin Films by Sol-Gel Process
XPS Studies on Composite ZrO2-CeO2 Thin Films Deposited on Metal Substrate by Sol-Gel
Preparation of Copper Particles Coated with Amorphous Titania
Interfacial Cracks Control of Y-TZP/Stainless Steel FGM Fabricated by Slip Casting
Surface Aluminizing and Internal Oxidation of Cu-Al-Y Alloy