- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Smart Materials are materials that can respond to environmental stimuli by exhibiting particular changes in some of their properties. Depending upon the change in some external condition, a smart materials can change its own characteristics (mechanical, electrical, appearance), structure, composition and/or response. These materials are usually embedded into systems whose inherent properties change favourably in order to meet performance needs.
Contents
Preface
Thermal Stress Simulations of SOFC Membrane-Electrode Assembly
Functionally Gradient 3YSZ-IN713LC Composites
Time-Frequency Signal Analysis for Nondestructive Evaluation of Pile with Cap
Parametric Study of Machining Effect on Residual Stress and Surface Roughness of Nickel Base Super Alloy UDIMET 720
Nonlinear Acoustic NDE - Qualitative and Quantitative Effects
Thermal and Tensile Properties of PP Nanocomposite Blends
Formation of Chemical Elements under Superdeep Penetration of Lead Microparticles in Ferrous Target
Shape Memory Alloy Combined with Piezoelectric Materials Applied for Structure Vibration Control
Sensitivity in Large Deflection of Bossed and Pre-Tensioned Layered Plate under Lateral Load
Using FEM Analysis for Evaluating Lifetime of the Turbine Blades Repaired by Different Kinds of Titanium and Nickel Alloys
Influence of Secondary Oxide Phases on Microstructural and Gas Sensitive Properties of Nanostructured Titanium Dioxide Thin Films
Design of Finish System Using Rotational Magnetic-Assistance in Ultrasonic Electrochemical Finishing of Freeform-Surfaces
Development of a Safety Network System for Highway Structures in Korea
A Study on the Problems with Long-Term Bridge Monitoring Systems, and Suggested Solutions
Sound Transmission through Lightweight All-Metallic Sandwich Panels with Corrugated Cores
Development of Miniaturized Piezoelectric Multimode Transducer for Projection Purpose
Macroscopic Differential Model for Hysteresis and Butterfly-Shaped Behavior in Ferroelectric Materials
Feedback Linearization of Hysteretic Thermoelastic Dynamics of Shape Memory Alloy Actuators with Phase Transformations
Characteristics of BNT Films Synthesized by a Hydrothermal Method
Electromagnetic Wave Shielding and Fire Retardant Multifunctional Polymer Composites
Multifunctional Polymer Composites for "Intellectual" Structures: Present State, Problems, Future
Monitoring Vibrating Structures Using PZT Impedance Transducers
Development of High Performance Fiber Reinforced Composite with Negative Thermal Expansion Property
Prevulcanized Natural Rubber Latex/Modified Lignin Dispersion for Water Vapour Barrier Coatings on Paperboard Packaging
Seamless Morphing Wing with SMP Skin
Kinetics of Martensitic Phase Decomposition in the Cu-10wt.%Al Alloy with Ag Additions
Flame Stabilization and Emissions of a Natural Gas/Air Ceramic Porous Burner
Preparation of NbB2-Al2O3In Situ Composites by SHS Involving Thermite Reactions
Effects of Particle Size and Size Distribution on the Mechanical Properties of EPDM/Silica Vulcanizates
A Novel Dynamic Absorber Using Enhanced Magnetorheological Elastomers for Powertrain Vibration Control
Mechanical Behavior of Non Sintered and Sintered Steel Wool
Experiments and Numerical Simulations of Interlocked Materials
Temperature Effects on Guided Wave Structural Damage Detection
Improvement of Fatigue Strength and Impact Properties of Plain-Woven CFRP Modified with Micro Fibrillated Cellulose
Active Vibration Control of Smart Hull Structure Using Piezoelectric Composite Actuators
Design and Control of Magnetorheological Fluid-Based Multifunctional Haptic Device for Vehicle Applications
Damping Force Control of MR Damper for a Passenger Vehicle Considering Hysteretic Compensator
Natural Fiber Reinforced Plastic Foams from Plant Oil-Based Resins
A Planar Dielectrophoretic Microdevice for Particle Manipulation
Development of a Variable Stiffness and Damping Isolator Using Magnetorheological Fluid Technology
Potentials of Plastic Optical Fibers for Sensor Technology
Multifunctional Materials via Molecular Self-Organization into Liquid-Crystalline Phase
The Influence of the Marine Bacterium Vibrio Natriegens Growth on Metallic Corrosion as Studied by Microscope Technologies
Super-Hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-Type Intermetallic in Seawater
Investigation on Fe3Al Corrosion Behavior in Simulating Marine Biofilm Environment
Cellular Morphology, Peel Strength and Thermal Conductivity for Wood/NR and Expanded EPDM Laminates for Roofing Applications
The Influence of Aging Treatments on the Notched Tensile Strength of Ti-6Al-6V-2Sn Laser Welds
A Smart Flow Sensor for Flow Direction Measurement
Date Palm Tree Fiber as Polymeric Matrix Reinforcement, DPF-Polypropylene Composite Characterization
Synthesis of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 Powders through Molten Salt Method
Facile Synthesis of Conducting Polypyrrole/Non-Aggregated Magnetite Nanocomposites and their Magnetorheological Characteristics
Quantum Chemical and Electrochemical Studies on the Inhibitive Effect of Carboxymenthylchitosan for Mild Steel in Different PHs
Multifunctional Performance of Europium-Doped Feldspar Ceramics
The Effect of Calcium Sulfate with Alloplast on the Periodontal Regeneration in One-Wall Intrabony Defect of Beagle Dogs
A Study on Ultrasonic Vibration Assisted Tapping of Titanium
Vibration Damping of Automotive Driveshafts with Piezofiber Composite Structures
Positive Temperature Coefficient Behavior of the Graphite Nanofibre and Carbon Black Filled High-Density Polyethylene Hybrid Composites
Swelling Behavior of Poly(Acrylamide) Nanoclay Composite Hydrogels
Miscibility Behaviour of Polyethylene Oxide/Hydroxypropyl Methyl Cellulose Blends
Synthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid Materials
Magnetorheological Fluids Behaviour in Tension Loading Mode
Stick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction Model
Crack Growth Characteristics Evaluation Method in Ceramics Based on DT Technique
Strain Transfer Models for Strain Actuators
Solution-Responsive Shape-Memory Polymer Driven by Forming Hydrogen Bonding
Novel Magnetostrictive Bimetal Actuator Using Permendur
Micro-Forming of Au49Ag5.5Pd2.3Cu26.9Si16.3 Metallic Glasses in Supercooled Region
Fabrication and Characterization of Microscale Sensors for Strain Measurement in Flexible Polymer Heart Valve Leaflet
Microstructure and Mechanical Properties of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments
Fracture Behavior of Polypropylene /Elastomer Blends
Self-Healing of Cracks in Epoxy Composites
Melamine Resin-Walled Microcapsules Containing Styrene: Preparation and Characterization
Synthesis and Characterization of a Novel Epoxy with Improved Processability
Preparation and Characterization of a Novel Flame Retardant
Analysis of the Novel Strain Responsive Actuators of Silicone Dielectric Elastomer
Mechanical Properties of Polybenzimidazole Reinforced by Carbon Nanofibers
Health Monitoring of Laminate Plates with AE Signals and Wave Propagation
Fabrication of Titania Film on NiTi Alloy by a Deposition-Assisted Advanced Oxidation Method
Effects of Electro-Fenton Process on Blood Compatibility and Nickel Suppression of NiTi Shape Memory Alloy
Preparation and Properties of Nano-Silica Filled Self-Reinforced Polypropylene
Development of the Green Composite Consists of Woodchips, Bamboo Fibers and Biodegradable
Transport and Magnetic Properties of CrO2-Polymer Magnetic Composites
Oxide Films Produced on Fe19Cr5Al Steel Coated with Al, Pt and Al+Pt Composite Nanofilms: Technological Aspects and Catalytic Properties
Catalytic Destruction and Removal of Toluene by Microwave/Fe3O4 System
Using Catalyst and Electrolysis Diaphragm Method to Produce Multiple Oxidants to Remove the Scaling and Slime in Cooling System
Bio-Chemical Sensor Based on Smart Material
Study on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method
Optimization of Preparation of the TiO2 Photocatalytic Reactor Using the Taguchi Method
Synthesis and Characterization of Bamboo-Like Carbon Nanotubes
Preparation of Silica Nano-Rods by CVD
Synthesis of Mono-Sized Silica Nanoparticles by Combustion Technique
Synthesis of Straight Y-Shaped Silica Nanorods
Optimization of Dimensions of a Sandwich Structure Using Genetic Algorithm (GA)
Effect of Substrate Temperature and Incident Energy for Alloyzation of Co onto Cu(001) Substrate
Three-Dimensional Charge Redistribution of Ionic Polymer-Metal Composites with Uncertainty in Surface Conductivity
InGaP/GaAs pnp Heterojunction Bipolar Transistor with δ-Doped Sheet between Base-Emitter Junction
Thermal Post-Buckling Analysis of Functionally Graded Panels in Hypersonic Airflows
Distributed Pressure Sensing as Smart Mat Applications with Hetero-Core Fiber Optic Nerve Sensors
Superdeep Penetration as the New Physical Tool for Creation of Composite Materials
Effect of Flame Retardant on Mechanical Properties and Flammability of Sisal/PP Composites
Fiber Bragg Gratings Array for Structural Health Monitoring
Precision Transfer and Replication of Ultrasonic Nanoimprint
Thermal Degradation of Novel Exfoliated PLLA/LDH Nanocomposites
Application of Schottky Bulk-Layer Design on Double-Heterojunction Pseudomorphic AlGaAs/InGaAs/AlGaAs High Electron Mobility Transistors (DH-HEMTs)
Superdeep Penetration of the Microparticles Accelerated by Explosion in Metals and Alloys of Iron
Natural Rubber and EPDM Rubber as an Impact Modifier in Vetiver Grass-Polypropylene Composites
An Impact Events Monitoring System for Wind Turbine Blades
Bionanocomposites of Grass
Analysis for Replication and Surface Roughness of Micro-Feature of Silicon Mold Insert by UV-LIGA Method
Effect of FGM on Film Quality of Al onto Cu(001) Substrate by Considering Incident Energy and Deposition Rate
Influence of Low-Level Oxidation on Mechanical Property of Two-Dimension Carbon/Carbon Composites
Study of the Decrease in Adhesion Force between Chloride-Isobutene Rubber and Stainless-Steel by Plasma Treated on the Rubber Surface
Shape Memory Characteristics of Ti50Ni50-xCux(x=35, 40) Alloy Strips
Surface Modification of Ti Dental Implants by Grit-Blasting and Micro-Arc Oxidation
Photocatalytic Degradation of Methylene Blue Using Porphyrin/TiO2 Complexes Activated by Visible Light
Electromagnetic Shielding of Multi-Walled Carbon Nanotube/Epoxy Nanocomposites
A NOx Sensor Based on Solid-Electrolyte Impedance Transducer
Mathematical Modeling of Thin Multiphysical Structures
Mechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene Composites
Chicken Eggshell as a Filler for Polymer Composites: Preparation and Characterizations
Optimization of Crack-Free Polytypoidally Joined Si3N4-Al2O3 Functionally Graded Materials (FGM) Using 3-Dimensional Modeling
Structural Transition of Stabilized Martensite in CuZnAl Alloy
A Comparative Study of the Hydrostatic Performances of 1-3 Piezoelectric Composites with a Porous Matrix
Friction Characteristic of Sliding Direction and Angle of Micro-Grooved Crosshatch Patterns under Lubricated Contact
Vascularized Multi-Functional Materials and Structures
TEM Studies on the Microstructure in Ferromagnetic Shape Memory Alloys
Experimental Observation on Domain Front Morphology in NiTi Microtube during Tensile Unloading
Fabrication and Simulation of a Ni-Al2O3 Crack-Free Joining for Multiple Metal-Ceramic Composites Using a New Functionally Graded Material (FGM) Method
The Application of Thermosensitive Magnetic Nanoparticles in Drug Delivery
Light-Induced Functional VO2 Films
Effects of EPON on Mechanical and Thermal Properties of Epoxy Resins
Microstructure and Tribological Performance of a-CNx /TiNx Composite Films Prepared by Pulsed Laser Deposition
The Preparation and Application of Shell Powder in UHMWPE-Fiber Unidirectional Plate
Effects of Temperature on Microstructure and Tribological Performance of a-CNx Films Prepared by Pulsed Laser Deposition
Structure and Mechanical Properties of Ceramic Coatings Fabricated by Micro-Arc Oxidation
Fabrication of Poly(diphenylsilylenemethylene) Matrix Nanocomposite Thin Films by Laser Ablation
Synthesis and Properties of Barium Strontium Titanate Thin Films on Copper Foils
Carbon Foam with High Strength and High Thermal Conductivity Doped by Nano-Titanium
Structure, Magnetic and Transport Properties of MnxGe1-x
Asymptotic Derivation of a Curved Piezoelectric Interface Model and Homogenization of Piezoelectric Composites
Microstructures and Magnetic Properties of Nanocomposite FePt Multilayer Films
Microstructures and Magnetic Properties of Sputtered Expitaxial Co3Pt/Pt Multilayer Films
Effect of N2 Partial Pressure on the Microstructure and Texture of MgO Films Deposited by Rf-Magnetron Sputtering
Tensile and Fatigue Testings of Hybrid Al/APC-2 Nanocomposite Laminates at Elevated Temperature
Effect of Tin Content on the Microstructure and Property of Brazed WC-Co/CrMo Alloy Steel Joints
Structural and Magnetic Properties of Cobalt and Aluminum Co-Doped ZnO Powders
Resorbable Metallic Implant: Findings from an Animal Model
Dynamic Response of Functionally Graded Circular Cylindrical Shells
Impact Behavior of Cracked Plate Repaired with Composite and FML Patches
Preparation and Tribological Properties of Amorphous Ti/C Multilayers by Pulsed Laser Deposition
Nickel Foam-Supported NiO/Ag Porous Spheres Prepared by Electrodeposition as Anode for Lithium-Ion Batteries
Electrochromic and Electrochemical Properties of Nickel Oxide Thin Films Prepared by a Modified Sol-Gel Method
Implementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection Actuation
Enhancement of Gas Response of ZnO Micro-Nano Structured Layers through Plasma Treatment
Novel Surfactant Free and Solid State Polymerization to Dendritic Polyaniline Nanofibers
Synthesis and Characterization of Luminescent Rod-Coil Poly[2,7-(9,9- Dihexylfluorene)] - Block-Poly(2-(Dimethylamino) Ethyl Methacrylate) by Atom Transfer Radical Polymerization
Preparation of Nanoporous Mondispersed Silica Nanoparticles Films Using Poly(styrene)- Block-Poly( 2-Vinyl Pyridine) as Template
Microstructure and Properties of Polyimide /Monodispersed Colloidal Silica Hybrid Films Prepared by Sol-Gel Process
Preparation and Patterning of Optical Hybrid Thin Films Based on Photosensitive Polyimide and Monodispersed Colloidal Silica
Synthesis of Green-Emitting Phosphors by Bicontinuous Cubic Phase Process
Synthesis and Characterization of Photopolymerized Poly(acrylic)/Monodispersed Colloidal Silica Hybrid Thin Films
Imaging Laminar Damage in Plates Using Lamb Wave Beamforming
Effect of Nitrocarburized Layer on the Resistivity Properties of Stainless Steels
Polycarbonate with Pineapple Leaf Fiber to Produce Functional Composites
Effect of Pretreatment on Properties of Coir-Based Green Composite
Effect of Brazing Temperature on the Microstructure and Property of Vacuum Brazed WC-Co and Carbon Steel Joint
Effects of Nitriding Processes on the Mechanical Properties of SACM 645 Steel
Influence of Radialization Dosage on Shape Memory Effect of Polystyrene Copolymer
Tensile Deformation Behaviours of Nylon 6 Based Nanocomposites
X-Ray Micro-Tomography as a Tool for Quantitative Characterization of Advanced Materials Manufacturing Processes
Wear Behaviors of Nano Grained Aluminum Alloys
Magnetic and Relaxation Properties of (CO45Fe45Zr10)x(Al2O3)1-x Thin Films
The Technique for Fabricating Submicron Moiré Grating Using FIB Milling
Investigate of Electrical Conductivity of Shape-Memory Polymer Filled with Carbon Black
Complex Multifunctional Materials for Special Applications
The Preparation and Study on UHMWPE/Epoxy Gel-Spun Fibres
Development of a High Performance Peristaltic Micropump
Couple Stress Model of Steric Stiffening in Nanoporous Solids
Synthesis and Modification of Epoxidized Natural Rubber from Natural Rubber Latex
Small Punch Test of Advanced In Situ Synthesized Ti Metal Matrix Composites
Synthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly Technique
High-Quality Single-Walled Carbon Nanotubes Synthesized by Floating Catalyst Chemical Vapor Depostion
Development of Noble Metal Oxide Electrode for Low Oxygen Evolution
A Kinetic Study on the Electrodeposition of Ni-Cr Alloy on Copper for Embedded Resister Layer in PCB
Characteristics of Silver Electrodeposition Solution and Silver Film Fabricated by Electrodeposition with Additives for Interconnection
Polymer Brush-Stabilized Polyplex for a siRNA Carrier with Long Blood Circulatory Half-Life
Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance
Development of an Ultra-Small Smart Temperature Sensor with Quartz Tuning Fork Resonators
Prediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage-Plasticity
Real 3D Crack-Front and Crack Trajectory Analyses of Single-Side Repaired Thick Aluminium Panels
Exchange Effect in TM-TbCo/RE-TbCo Double Layer Films
Magnetic Properties of TbCo/(SiNx/Co)n Films
Singularity-Reduced Integral Representations for Discontinuity in Smart Materials
Self-Protection Multi-Ring-Architecture Fiber Sensing System
The Fabrication of Nanoporous Hydroxyapatite Ceramics
Effect of Copper Oxide on the Sintering of Alumina Ceramics
The In Vivo Study of Biomimetic Chitosan Substrates' Osteoinduction Effects
The Strength Deterioration of Aramid Fiber in High Temperature
Effects of Bi Doping on the In15Sb85 Phase Change Recording Thin Film
Carbon Nanotube Composites for Vibration Damping
Synthetic Biomimetic Carbonate-Hydroxyapatite Nanocrystals for Enamel Remineralization
Influence of Ru(II) Bipyridyl Complex on the Photocatalytic H2 Evolution over TiO2 Nanoparticles with Mesostructures
Study on the Deformation of TiNi/AlSi Composite Alloy Using DSCM Method
Crystallization Behavior of Polypropylene (PP)/ Polyethylene Terephthalate (PET) Composite Fibres
The Phenotypes of Osteoblastic Cells on Surfaces with Different Mechanical Properties
Dynamic Reinforced of Casting Alloys after Superdeep Penetration
Fabrication of Poly(L-Latic Acid) Scaffolds with Wool Keratin for Osteoblast Cultivation
Antibacterial and Nontoxic Nano Silver PLLA Composites for Tissue Engineering
Microstructural Evolution during Warm Compression of Medium Carbon Steel Quenched
Mass-Production of Practical Mussel Adhesive Protein in Escherichia Coli
Smart Hybrid Mussel Adhesive Materials for Cell and Tissue Engineering
Characterization of a Functionally Graded Hypereutectic Al-Si Alloy Produced by Centrifugal Method
Towards a Generalized Macro-Level Damage Model for Unidirectional Composites
Process Development of Low-Cost AgNi and AgFe Contact Materials with no Range of Solid Solubility
Modeling of the Cyclic Behavior of Shape Memory Alloys during Localized Unstable Mechanical Response
Nonlinear Model on Torsional Behaviors of CFRP Strengthened Reinforced Concrete Beams
Pseudoelastic Behavior of Cu-Al-Be Shape Memory Wires Subjected to Varied Loading and Unloading Cycles
Synthesis and Characteristic of Molecularly Imprinted Polymer Immobilized Mesoporous Silica Sphere for Selective Binding of S-Naproxen
High-Temperature Thermal Cyclic Oxidation Behavior of Wide-Gap Brazed IN738 Superalloy
Preparation of CuMgAl Hydrotalcite-Like Compounds at Low MII/MIII Molar Ratios
Shape-Controlled Synthesis and Characterization of CuS Crystal from a Low Temperature Hydrothermal Route
Precise Quantitative Evaluation of Nano-Ordered Intermetallic Compounds in Sn-3.0Ag-0.5Cu Lead-Free Solder Bump by Using TEM
Influence of Carbon Sources and Catalytic Precursors on the Products Prepared by Catalytic Combustion
Effect of Particle Size of Fully Porous-Coated (FPC) Implants on Osseointegration
Effects of Silver Nanostructures on Fluorescence Modulation of Rhodamine B and Fluorescein
About the Elaboration and Characterization of Fe-Based Composite with Friction Destination
Synthesis of Strontium-Doped Hydroxyapatite Powder via Sol-Gel Method
Effect of Slurry Preparation on Physical Properties of Porous Hydroxyapatite Prepared via Polymeric Sponge Method
Porous Barium Strontium Titanate-Titania Nanocomposites for Photocatalytic Applications
Development of Novel Environment-Friendly Magnesium Alloys
Improvement of Microstructural Controllability of Cellular Ceramic for Multifunctional Composites
Wetting and Adhesion Behavior of Undulated a-C:H Film Deposited on Nano-Scale Copper Dot
Study of Nanometer Al2O3 Composite Electroless Deposit Strengthened by Different Laser Power
A Novel Method to Synthesize Nanocrystalline Calcium Phosphates
Porous Ceramics for High Temperature Filters
Continuum Modeling on Macroscopic Domain Patterns during Stress Induced Phase Transition in NiTi Tubes
Preventing Metal Structure from Water-Seepage by Organic Sealants Comparing Research
Study on the Dielectric Properties of Hybrid and Porous Polyimide-Silica Films
Preparation and Characterization of Functional Geopolymer
Preparation of CF/BR Composite Used for Electromagnetic Shielding
Synthesis of Si3N4/Polyimide Hybrid Films
Preparation of Low-K Fluorinated Polyimide/Phlogopite Nanocomposites
Platinum-Ruthenium-Multiwalled Carbon Nanotube-Nafion Nanocomposite for Methanol Electrooxidation
Microstructures and Oxygen Reduction of Recycled TiH2 Powders during Sintering
Comparison of Bone Formation in Rabbits Using Hydroxyapatite and β-Tricalcium Phosphate Scaffolds Fabricated From Egg Shells
Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method
Statistical Analysis on Bonding Strength and Failure Mechanism of Plasma-Sprayed HA Coating with Reinforced Intermediate Layers
Layer-by-Layer Finite Element Analysis of Smart Composite Plates
Cuprous Oxide Films Prepared by Using a Microwave Atmospheric Pressure Plasma Torch
Composites of Pet and PBT/PP with Bentonite
Analytical Solutions for Crack-Tip Higher Order Stress Fields in Thermal Barrier Coating
The Discontinuous Higher Order Fields for Anti-Plane Crack at Interface
Effect of Electrospun Fibers on the Interlaminar Properties of Woven Composites
Functionally Graded Dental Implant and its Effect on Bone Remodeling
A Study on Improvement Capture Velocity for Increasing Inhalation Efficiency of Hood in Local Ventilation System
Study on Three-Dimensional Thermal Deformation of Aluminum Casting Tire Mold by Numerical Analysis and Experiment
Anisotropy Control of Cold Rolled Cu-Ag Alloys
Ageing Behavior of Cu-Ag Alloys
Microcosmic Growth Process of ZnO Microrods
Composite Ceramics Reinforced with Zirconia Nanopowders
Bioglasses in the SiO2-CaO-P2O5 System
Heat and Fluid Flow Characters of Single-Screw for Extrusion Molding by Finite Element Analysis
A Study on Corrosion Defect Evaluation of Painted Metal by Using Nondestructive Tests
Ultra-Small Superparamagnetic Iron Oxide Nanoparticles as MRI Contrast Enhancing Agents
Novel Synthesis of Ultra-Small Silver Nanoparticles with High Antimicrobial Activity
Influence of Annealing on the Magnetic Properties of Fe50Co50 Films
A New Method for Temperature Measurement by the Nanometer Particles
Characterization of Iron Doped Titanium Nitride Thin Films Prepared by Magnetron Sputtering
Toxicology Studies of a Superparamagnetic Iron Oxide Nanoparticle In Vivo
Preparation of Aspect Ratio-Controlled Carbon Nanotubes
Fabrication of Organic Silk Fibroin/Multiwalled Carbon Nanotube Composite Cryogels by Freeze-Drying Method
Multiwalled Carbon Nanotubes-Incorporated Polyurethane Nanocomposites
Nanosize Copper Dispersed Ionic Liquids as an Electrolyte of New Dye-Sensitized Solar Cells
Sensing of Ethanol with Nanosize FeZnO Thin Films
Applications of Cu@C Nanoparticles in New Dye-Sensitized Solar Cells
Chemical Structure of Nanosize Copper Wires in MCM-41
Analysis of Infrared Thermography during Tensile Test of GFRP
Thermal Viscoelastic Analysis of 3D Fabric Nanocomposites
Periodic and Chaotic Motions of a Simply Supported FGM Plate with Two Degrees-of-Freedom
Blending of Natural Fibres and Thermoplastics by Screwless Extrusion
The Influence of Surface Modification of Multi-Walled Carbon Nanotubes on the Electrical Property of its Polyethylene Composites
Preparation, Adhesive Performance and Stability of Natural Rubber Latex Grafted with N-Butyl Acrylate (BA) and Methyl Methacrylate (MMA)
Investigating Nanoparticle Effect on the Mode I Fracture Toughness of Glass/Epoxy Composites
Diagnostic Imaging for Structural Damage
The Effect of Octa(Maleimidophenyl)Silsesquioxane on Thermal and Dielectric Properties of Bismaleimide-Triazine Resins
Polycarbonate-Carbon Nanofibers Composites: An Electron Spin Resonance Study
Stretching-Induced Orientation for Improving the Mechanical Properties of Electrospun Polyacrylonitrile Nanofiber Sheet
Electric Field Distribution in Macro Fiber Composite Using Interdigitated Electrodes
Two-Dimensional Fractal Structures of Metal Oxides Synthesized at Room Temperature
Synthesis and Characterization of Europium Ternary Luminescence Coordination Compound Nanorods
Fourier Transform Infrared Study on Sol-Gel Derived Manganese-Doped Hydroxyapatite
Fracture Behavior of Natural Fiber Reinforced Biopolymer Matrix Composite
Photo- and Thermo-Chromic Study of the Ethylenediamine Trimolybdate
Titanium Alloy Ti6Al4V's Corrosion Resistance Behavior by Double Glow Discharge Plasma Hydrogen-Free Carburizing Process
Study on Osteoinductivity of Injectable Calcium Phosphate Cement Scaffold
Study on the Low-Velocity Impact Behavior of CFRP with Nanoclay-Filled Epoxy Matrix
Fabrication of Highly Ordered Titania Nanotubes in Viscous Organic Electrolytes
Tensile Properties of Different Silkworm Silk Fibers
Preliminary Study on a High Strength Nanoclay/Epoxy Coating for Ocean Engineering Applications
Manufacture of a Homogenous Nano-Diamond/Poly (Lactic Acid) Bio-Engineered Composite
Production of a Green Composite: Mixture of Poly (Latic Acid) and Keratin Fibers from Chicken Feathers
Noise Reduction by Using Composite Plate
Plastic Optical Fiber Sensors for Measurement of Large Strain in Geotextile Materials
High-Energy Influences of Substance's Flows on Structural Changes in Materials
Glass Substrate with UV Imprinted Polymer Moth Eye Structure
Study on Non-Halogen Flame-Retarded HIPS with High Strength HIPS
Optimal Design of Nanostructures Used in Vibration Control
Homogenization, Numerical Analysis & Optimal Design of MR Fluids
Variational Approach in Optimal Design of Piezoelectric Sensors & Actuators
Application of Three-Dimensional Displacement and Strain Distribution Measurement by Windowed Phase-Shifting Digital Holographic Interferometry
Development of Model of the Superdeep Penetration of Microparticles
Possible Reasons of Degradation of Elements of Space Vehicle Control-Systems
Determination of Damages in Superdeep Penetration and Alteration of Properties of Materials under the Extreme Conditions
Characterisation and Novel Applications of Fibrillar Polymer Composites
Behavior of CFRP Wrapped Concrete Columns with Partial Deteriorated Strength
Nano-Cellulose as Promising Biocarrier
Surface Characteristics of Magnesium Alloys Treated by Anodic Oxidation Using Pulse Power
Bone-Implant Contact of Surface-Modified Titanium Implants
Irradiation of Synthesized Magnetic Nanoparticles and its Application for Hyperthermia
Surface Morphological Changes Accompanying Dissolution of Bioactive Glass: Effect of Residual Stress
Effect of pH Value on Synthesis of Calcium Phosphates
Surfaces Modified by Amphiphilic Copolymer: Preparation and Application
Near-IR Sensitive Au-Au2S Nanoparticles with Biocompatibility for Drug Delivery
Novel Organic-Inorganic Hybrid Nanoparticles as Non-Viral Gene Vector
Bioassay Based on Photonic Crystal
Distinctive Degradation Behaviors of Electrospun PGA, PLGA and P(LLA-CL) Nanofibers Cultured with/without Cell Culture
A Retrievable Polymer Urethral Stent for Treatment of Urethral Strictures
Activation of MAPK and NF-κB Induced by Biomaterials in Vascular Endothelial Cells
An Evaluation of CaF2 Doping Tricalcium Silicate as Dental Restorative Materials
Construction of Nonbiofouling Biofunctional Glass Surface by Self-Assembled Monolayer and Graft Hydrophilic Polymer
Poly(L-Lactide)/Multiwalled Carbon Nanotube Composites: Interaction with Osteoblast-Like Cells In Vitro
In Vitro Bioactivity of Potassium Titanate Whiskers
Kinetic Effect of Cationic Comb-Type Copolymers on DNA Hybridization
Bio-Fabrication of Patterned Cellulose Nano-Fibers
Electrospinning Nanocomposite Nanofibers of Hydroxyapatite/Chitosan
Plasma Polymerized Thin-Films for Biosensors
The Design of Novel Scaffolds by Integrating Microbial Cellulose onto Plasma Treated Polypropylene
Study on Blood Compatibility of SIS Modified by Plasma Surface Grafting
An Experimental and Computational Study on Zn-Substituted Hydroxyapatite
Biocompatibility and Osteogenesis of Calcium Phosphate Cement Scaffolds for Bone Tissue Engineering
Electrochemical Deposition of Fluoridated Calcium Phosphate Thin Film on Titanium Substrates
Deformation and Fracture of Bone Analogue Biomaterials Having Different Polymer Matrices
Totally Biodegradable and Osteoconductive Composite Material Consisting of Polyhydroxybutyrate and Tricalcium Phosphate for Bone Tissue Repair
In Vitro Degradation and Protein Adsorption Characteristics of PHBV/PLLA Blends and PHBV/PLLA-Based Tissue Engineering Scaffolds
Characteristics and Chemical Stability of the Bioactive Titania Layer Formed on Ti, Ti-6Al-4V and NiTi SMA through a Low Temperature Oxidation Process
Investigation of Platelet Adhesion Behavior on Si-N-O Films Synthesized by Unbalanced Magnetron Sputtering
Adsoption CD34 Antibody onto the Col/Hep Coating Film on Titanium to Improve Cytocompatibility of Titanium
Deposition of Diamond-Like Carbon Films on Polyoxymethylene Substrates by Magnetic Filtered Cathodic Vacuum Arc Deposition
Study the Restenosis after Percutaneous Transluminal Coronary Angioplasty(PTCA) in the Organ Culture System
MCP-1 Expression Associated with Inflammation and Biomaterials
The Biomedical Material of Functional ePTFE Hydrogels by the Cold Plasma Method and Radiation Technique
Influence of Hydrogen-Plasma Treatment on Blood Compatibility of Titanium Oxide Films
Novel Silicon Based Anodic Spark Deposition Treatment for Dental Implant
In Vitro Biocompatibility Study of Nano TiO2 Materials
Insertion Behavior of Microneedles for Drug Delivery
Microstructure Control and Pseudoelasticity of Ti-Nb-Ge Alloy
Effect of Oxygen Content on Microstructure and Mechanical Properties of Ti-Nb-Ge Alloys for Biomedical Application
An Investigation into Dual-Source and Dual-Power Electrospinning of Nanofibrous Membranes for Medical Applications
Preparation of Lactic Acid Based Polyurethanes Modified by Castor Oil
Preparation and Characterization of Golden-Colored Pigments Based on Silver Coated with Metal Oxides
Effects of Lead and Boride Inhibitors on the Passivity of Nickel Alloy 600 Surface
A Study on the Tribological Behavior of Valve Train System by Low Friction Coating
Fabrication of Chemiluminescence Sensor Based on the Funcinalized MWCNT-Nafion Composite Film
Radiolytic Deposition of Pt-Ru Catalysts on the Conductive Polymer Coated MWNT and their Catalytic Efficiency for CO and MeOH
Synthesis and Characterization of (C, N)-Alloyed Stainless Steel Coatings by High Energy Ion Assisted Magnetron Sputtering Deposition
Mechanical Mechanisms of Chemical Mechanical Polishing
Tribological Properties of a Partially Transformed Carbon Layer from SiC
Effects of Surfactant Concentration on Step Height Reduction of SiO2 in Chemical Mechanical Polishing with Ceria Slurry
The Characteristics and Thermal Stability of CrN/AlSiN Multilayer Coatings
Effect of Foreign Metal Doping on the Gas Sensing Behaviors of SnO2-Based Gas Sensor
Deposition of Pd onto SnO2 Nanoparticles-Based Gas Sensors Using a Pd Complex as the Precursor
H2 Sensing Performance of TiO2-Based Diode-Type Sensors
Characterization of Intercalation Type Organic/MoO3 Nanohybrids and their VOC Sensing Properties
Effect of Supported Transition Metal on CO Sensing Performance Using SnO2 in Reducing Atmosphere
Resistive Type Sensor Using Ceria Thick Film with Nano Particles
Fabrication of Nano Particles on Vertically Aligned Multi-Wall Carbon Nanotubes by E-Beam Evaporation
