- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This collection of 258 peer-reviewed papers focuses on the topics of eco/environmental materials, energy materials, magnesium, aerospace materials and biomaterials for medical applications.
Contents
Preface
Sponsors
I. Eco/Environmental Materials
Evaluation of Atmospheric Corrosivity by ACM Technique
Removal of Cu2+ from Aqueous Solution by Alkaline-Activated Konjac Glucomannan
Synthesis and Characterization of Titania Nanoribbons for Lithium Selective Adsorption
Multiple Imputation for Missing Data in Life Cycle Inventory
The Controlling Factors in the Content of Cr6+ in Green Strontium Ferrite
Experimental Study on Macro-Kinetics of Flue Gas Desulfurization Using Pyrolusite Pulp by a Double Magnetic Stirred Reactor
Copper Electrowinning from Gold Plant Cyanide-Containing Solution
Preparation and Properties of Alginate Salt Fibers: An Inherent Flame-Retardant, Biodegradable Fiber
Using Demercurated Lighting Phosphor and MSWI Scrubber Residues to Prepare High Performance Plastic Concrete
Directly Synthesis of Polymeric Nano-Composite from Waste Solid Absorbents of Treating Styrene Monomer-Containing Waste Gas
Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan
Experimental Study of the Mechanical Properties of Hybrid Fiber Reinforced Concrete
Application Study of Polypropylene Fiber Reinforced Concrete Railway Tunnel Lining Structure within Hard Rock Mass Using Wet-Sprayed Technique
Study on the Moisture Absorption Properties of Poly[acrylate-co-methacrylate]
Modelling Flue Gas Desulfurization Using Pyrolusite Pulp in a Jet Bubbling Reactor
Enhancement Corrosion Resistance of Two (Vinyl)Silsesquioxane Hybrid Films and their Validation by Gas-Molecule Diffusion Coefficients Using Molecular Dynamics Simulation
Silsesquioxane Materials as Sun Protection Factor Ingredients and as Films for Greenhouse Covers
Influence of Pore Size on Enzymes Adsorption in Mesostructure Cellular Foams (MCFs)
Property and Influence of Membrane on the Absorption Efficiency of Sulfur Dioxide from Flue Gas
Application of Inorganic Clay in Preparation of Coated Water-Transmitting Fiber
The Application of Aqueous Span 80 Composite Material in Methane Absorption and Explosion Suppression
Bio-Effects of Nano-Titanium Dioxide on Lungs of Mice
Anticorrosion Behaviors of Quaternary Polyethyleneimine in Acidic Environment
Preparation of Ca-Substituted α-Sialon Eco-Materials by Utilizing Tungsten Molybdenum Bismuth Polymetallic Tailings
Selective Deposition of Titanium Dioxide Thin Film on Glass Monolayers by Impregnating Method
Effect of Red Mud on Mechanical Properties of Loess-Containing Aluminosilicate Based Cementitious Materials
Study on the Electrochemical Behavior of Ferric Stearate and its Electro-Catalytic Oxidation of Hydrogen Peroxide
Surface Modification of Super-Fine Magnesium Hydroxide Powder and it's Flame-Retardant Treatment of Flexible PVC
Miscibility Evaluation of LDPE/EVA Blends Filled with Lignin by Rheological Properties and FT-IR
AFM Study of Untreated and Treated Fibers of Mongolian Goat Cashmere
Development of Alkali Activated Slag Cement Based Ecomaterial and its Environmental Coordination Evaluation
Study on the High Performance Coal Gangue Foam Concrete
Enhancement Corrosion Resistance of (3-Glycidoxylpropyl)- Silsesquioxane Hybrid Films and its Validation by Gas-Molecule Diffusion Coefficients Using MD Simulation
Modified PLA Carrier Material and its Performance in Immobilization of Nitrifying Bacteria
Effect of Electromagnetic Stirring on Tin Bronze Plate Blank
Effect of TiO2 on the Thermal Conductivity of Eco-Friendly Silica Bricks Fabricated by Yellow River Silt
Preparation, Characterization and Oxidation Mechanism Study of Biomorphic Porous Carbon Coated with SiC Gradient Coating
Preparation of Titania Cloth Using Cellulose Fabric as the Template
Photocatalytic Degradation of Organic Dye on Sulfated Nanosize TiO2 Sensitized by H2O2 under Visible irradiation
Synthesis of TiO2 Nanorod-Assembled Microspheres from TiCl3 and its Photocatalytic Activities
Studies on the Active Oxygen in Zinc Oxides with Different Morphologies
Synthesis of Cerium Oxide Nanoparticles by the Precipitation Method
Hydrothermal Synthesis of Self-Assembled-Microfibers with Rutile Single Crystal Titania Nanorods
Photo-Oxidative Degradation of Metallocene Linear Low-Density Polyethylene
Preparation and Photocatalytic Activity of Fe-Doped TiO2 Nanopowders
Study of High Co Superhard High Speed Steel Surface
Synthesis and Characterization of Rare Earth (Sm,Y) Light Conversion Film
Effect of the Superfine SiO2 Powder Content on the Properties of SiC Composites
Synthesis of O'-SiAlON/SiC Ecomaterials by Using Non-Traditional Resources: Yangtze River Sand
Investigation of the SCR Catalyst Ce-V/TiO2
Preparation of Eco-Friendly Composite Ceramic from Iron Ore Tailings
Synthesis of Brookite-Typed Titania from Titanium Chloride Solution
Preparation and Characterization of TiO2 Nanowires on Aluminum Substrate
Photo-Catalytic Activity of Cu2O Films with Various Crystal Structures Prepared by DC Reactive Magnetron Sputtering
Influence of Silver / CNTs on Epoxide Resin Based Conductive Adhesive
Degradation of Harmful Gases in Air by Ce3+/TiO2 Complex Nanomembrane
Photocatalytic Activity of TiO2-C Composites under the Visible Light
Effect of TiO2 Nanoparticle on Thermal and Tensile Behavior of Polypropylene/ Polylactic Acid Composite
Fabrication of Plasma Treated Nano Zinc Oxide/PP/PLA Composites Filaments Using Melt Spinning
Bioavailability and Speciation of Cd, Pb, Cu, and Zn in Sewage Irrigated Soils in the Southeastern Suburbs of Beijing
II. Sustainable Energy Materials
Study on Properties of Quasi Solid Polymer Electrolyte Based on PVdF-PMMA Blend for Dye-Sensitized Solar Cells
Low-Temperature Plasma Deposition of Diamond-Like Carbon and III Nitride Thin-Films for Photovoltaic Devices
Experimental Study on Solar Photovoltaic System with Compound Parabolic Concentrator
O2 Reduction Reaction Activity of MN4 Spherical Polymeric Cobalt Porphyrin
The Study of Boron-Doped Nanocrystalline Silicon Film with High Conductivity
Influences of Stabilizers on the Microstructure and Properties of Sol-Gel Tin Doped Indium Oxide Thin Films
Analysis of Improved Photoelectric Properties of Copper Phthalocyanine/C60 Organic Solar Cells: Effects of Substrate Temperature
Preparation and Research on TiO2/SiO2 Nanofilm with High Transmittance on Solar Cell Glass
One-Step Sintering of CoSb3 Thermoelectric Material and Cu-W Alloy by Spark Plasma Sintering
Thermoelectric Properties of Bi0.5Sb1.5Te3 Prepared by the Ultrarapid Quenching Process
Thermoelectric Properties P-Type Si-20 at % Ge by Addition of TiN Nanoparticles
Effect of B2O3 on Long-Last Phosphorescence of SrAl2O4:Eu2+,Dy3+
Analysis and Design of High-Speed Flywheel on Satellite Energy Storage/Attitude Control System
Polyamide as a Matrix for the Creation of Form-Stable Phase Change Materials
Research on Technology of Blast Furnace Energy Saving and Optimization of Operation Principle
Structural Study on Ammonia Borane for Hydrogen Storage
Segregation Effect on Nanoscale Mg - Based Hydrogen Storage Materials
Synthesis and Transport Properties of Polycrystalline Co-Filled Type-I Clathrate Compound (Sr,Ba)8Ga16Ge30
Deposition and Characterization of GaN Films on ITO Glass Substrates by PECVD
Application of ANN Back-Propagation for Fracture Design Parameters in Extra-Low Cycle Rotating Bending Fatigue
Processing 20 Ply Clad Plate by Accumulative Clad Rolling from Stainless Steel/Aluminum/Aluminum Alloy.../Stainless Steel Sheets
Preparation of Nanosize Iron Pyrite FeS2 and its Properties
Antibacterial Behavior of Ag-Ce-TiO2 Composite Films in the Different Irradiations
Electrochemical Performance of Tin-Aluminum Thin Film Anodes for Lithium Ion Battery
Nanocomposite Hydride LaNi5/A- and Mg2Ni/A-Type Materials (A=C, Cu, Pd)
Optimizing on the Negative Electrode of Ni/MH Power Battery by Orthogonal Design
CNT-CoO Complex Conductive Agent for the Positive Electrodes of MH/Ni Batteries
Preparation for the Hollow Nickel Fibres of the Positive Current Collector by Electroless Plating Technique
Effects of Mg2+ Doping on the Properties of LiFePO4 Synthesized via Hydrothermal Route
Preparation of PPy/CNT Composite Applications for Supercapacitor Electrode Material
Investigation on Lithiation Mechanism of Interphase Ni3Sn4 Alloy Used as Anode Material for Lithium-Ion Batteries
PVDF-PAn Co-Polymer with High Permittivity Fabricated by Emulsion Polymerization
III. Electronic/Packaging Materials
Study on 1/fγ Noise Characterization of Metallic Interconnection Electromigration
Thermodynamics of Oxidation on Pb-Free Solders at Elevated Temperature
Formation Enthalpy, Free-Energy and Activity Coefficients of Sn-Pb Eutectic Solders
Effect of the Content of Cu on Solderability and Mechanical Properties of Bi5Sb Solder Alloy
Production and Properties of a 90%Si-Al Alloy for Electronic Packaging Applications
Influence of Mg and Si in the Aluminum on the Thermo-Physical Properties of Pressureless Infiltrated SiCp/Al Composites
Investigation on Wear- and Corrosion Resistance of TiN Films by CVD
Fabrication and Properties of Aluminum Nitide Ceramics Doped Carbon Nanotubes
Investigation of Nano/Microcrystalline Diamond Composite Films for Thermal Applications
Research of a Novel MEMS Vector Hydrophone Based on a New Package Process
Fretting Tribology of Al2O3/Cu Composite Prepared by Powder Metallurgy
Synthesis of Carbon Nanofibers: A Catalyst Derived from Cupric Carbonate Basic during Acetylene Decomposition
Self-Assembly Growth and Size Control of Silver Nanocrystals for Nonvolatile Memory Applications
Study on the Microstructure and Deformation Behavior of Ultrafine-Crystalline Cu-Y Ribbons
Correlation Between Lattice Strain and Energy Gap Bowing of AlxGa1-xN Epitaxial Thin Films
Fabrication and Properties of Large-Area Silicon Nanowire Arrays
A Novel Inorganic Ion Conductor Electrochromic Device: MoO3/LiAlO2/NiOx
Photoluminescence Properties Influenced by Calcining Condition and Doping Concentration of Nano-Sized ZnGa2O4: Cr3+
IV. Transportation Materials
Study of a New Chromium Carbide Reinforced Ni3Al Matrix Composite Hardfacing Material on IC6SX
Microstructure Characterization of the Cu-Ti-C Composites Prepared by Mechanical Alloying and Spark Plasma Sintering
Finite Element Simulation of Effects of Process Parameters on Deposition Rate of SiC by Chemical Vapor Deposition
Study on the Tribological Properties of Low-Power Plasma-Sprayed Al-Cu-Cr Quasicrystalline Coating
Porosity Ratio and Anti-Corrosion Properties of Cr/CrN Films Synthesized by Unbalanced Magnetron Sputtering
The Lubrication Properties of Diamond-Like Carbon Coatings in Engine Oil
Influences of Heat Treatment on Microstructure and Creep Properties of Ti6Al4V Alloy
Effect of Trace Element Erbium on Corrosion Resistance Properties of Al-Zn-Mg-Cu Alloy
Strength Properties of Thin Alumina Coatings on 4043 Aluminum Alloy
Thermodynamic Research on Solution Properties of Al-Er Alloys
Resistance Spot Welding Process of Galvanized Steel Sheet Based on Regression Modeling
Effect of C Content on Properties and Microstructure of Steel-Bonded Cemented Carbide GT35 Produced by In Situ Reduction of Ilmenite
Nano Effects of Helium Plasma Treatment Nano SiO2 Coating Kevlar Filaments
Nano Effects of Helium-Plasma Treatment Nano-SiO2 Coating Vectran
Nano Effects of Oxygen-Plasma Treatment Nano-SiO2 Sol-Gel Coating T-300 Carbon Fiber
Nano Effects of Helium-Plasma Treatment Nano-SiO2 Sol-Gel Coating UHMWPE Filaments
Nano Effects of Helium Plasma Treatment Carbon Nanotubes Coating Basalt Filament
Effects of Fiber Surface Treatments on the Moisture Absorption and Interfacial Properties of Natural Fibers and their Composites
V. Magnesium
New Method for Improving Formability of AZ31B Magnesium Alloy Sheets
Study of the Effect of Microstructure on the Anisotropy of AZ31 Magnesium Alloy Thin Sheet
Comparison of As-Cast Microstructures and Mechanical Properties for Mg-Ce-Mn-Sc and Mg-Ce-Mn-Zn Magnesium Alloys
Effect of the Thickness of Dies for the Solidification Balance of Permanent Mould Casting AZ91D Magnesium Alloy
Study on the Filtering Purification of AZ91 Magnesium Alloy
Oretical Analysis of Filtration Purification of Mg Scrap Melt
Effect of Sr and Nd on Microstructure and Mechanical Properties of AZ91-1Si Alloy
Effects of Strontium Addition on Microstructure and Properties of AE42 Magnesium Alloy
Choice of Bubble Radius in Floatation Refining of Magnesium Alloy
Computer Simulation and Optimization of Equal Channel Angular Extrusion of AZ31 Magnesium Alloy
Effect of Solid Solution Time on the Microstructure and Mechanical Properties of AZ81-4Gd Magnesium Alloy
A Study of Hot Extrusion of 6063 Aluminum Alloy-Clad AZ31B Magnesium Alloy Bar
Comparison of Microstructure and Mechanical Properties between ZM21 and ZME210 with Different Hot Extrusion Ratios
Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum Contents
Preparation of Semi-Solid Billet of ZW61 Alloy by Equal Channel Angular Extrusion
Microstructure and Mechanical Properties of an Mg-Zn-Zr Alloy Modified by Rare Earth of Erbium
Deformation Behavior and Dynamic Recrystallization of As-Cast Mg-Y-Nd-Gd-Zr Alloy: A Study with Processing Map
Mechanical Properties and Microstructure of AM140 Magnesium Alloy
Research on the Microstructures and Mechanical Properties of Annealed Cold Upsetting AZ31 Magnesium Alloy
Damage Evolution Equation of AZ31B Magnesium Alloy during Superplastic Deformation
Upper-Bound Analysis for Change-Channel Angular Extrusion
Research on the Rolling of AZ31 Strip Prepared by Twin Roll Casting
First-Principles Study of the Mechanical Properties of Mg-Based Alloys with FCC and Hexagonal Structure
Friction and Wear Properties of Magnetron Sputtered DLC/SiC Films on Magnesium Alloy
Mechanical Testing and Numerical Simulation of the Fracture Toughness of Magnesium Alloy AM60 under Impact Loading
Bonding of AZ91D Mg Alloy and Al Metal with Mg-Al Eutectic Alloy and its Application in Al Coating on AZ91D Mg Alloy
Effect of TiN/CrN Multilayer Coating by Cathodic Arc Deposition on Wear and Corrosion Behaviours of AZ91D Magnesium Alloy
Preparation of Aluminum-Magnesium Alloys from Magnesium Oxide by Molten Salt Electrolysis Method
Structures of Zinc-Manganese Phosphate Film and Organic Coating on Magnesium Alloys
Effect of Ga on the Microstructure and Mechanic Al Properties of AZ81 Alloy
Morphology of α-Mg3Sb2 Precipitates in Mg-Sb Binary Alloys
The Anticorrosive Properties of Sol-Gel Coating on AZ31 Magnesium Alloy
Study on the Technology of the Environment-Friendly Conversion Coating Containing Phytic Acid for Magnesium Surface
Microstructures and Properties of Fiber Laser Welded ACM522 Magnesium Alloy Joint
Research on Grinding Force and Surface Roughness Based on the Abrasive Belt Grinding to Magnesium Alloy
A Study on Corrosion Inhibitor for Magnesium Alloy
Influence of KH-550 Silane Treatment on the Corrosion Resistance of AZ31 Magnesium Alloy
Analysis on the Weld Defects of the AZ91D Magnesium Alloy Joints
Preparation and Property of the Environment-Friendly Anodizing Oxidation Coating of AZ31 Magnesium Alloy
Study on Corrosion and Degradation Behavior of Mg-Ca Alloy in Simulated Body Fluid
Effect of Al Content on Hydrogen Storage Properties of Amorphous Mg1-xAlxNi (x=0, 0.1, 0.2, 0.3) Alloy
Constitutive Description for Drawing Limit of Magnesium Alloy Tube Based on Continuum Damage Mechanics
Mechanochemical Synthesis of Nanocrystalline Mg-Based Hydrogen Storage Composites in Hydrogen Alloying Mills
Synergistic Effects of Al and Cr Addition on Microstructure of Mg2Ni Hydrogen Storage Alloy
Research on Corrosion Resistance of Mg-Al-Sr Alloy
Study on Expansion of Cement-Based Material with Addition of Magnesium Oxide
Finishing Advanced Surface of Magnesium Alloy Tube Based on Abrasive Belt Grinding Techology
Thermal Analysis on Vacuum Synchronous Reduction for the Preparation of Mg-Sr Alloy
Effect of Plasma Interface Treatment and Cathodic Electrophoretic Coating on Mg Alloys
Experimental and Theoretical Study of the Cyclic Relaxation of Die Cast Magnesium Alloy
Development of Surface Treatment in Industrial Scale for Components with Metallic Luster on AZ31 Sheets
Effect of SF6 Cover Gas Humidity and Concentration on Efficient Protection of Molten Magnesium
VI. Biomaterials for Medical Applications
In Vitro Cytotoxicity Study of the Nano-Hydroxyapatite/Bacterial Cellulose Nanocomposites
Functionality of Ti-O Thin Films Doped by Phosphorus: Wettability, Semiconductor Performance and Blood Compatibility
Silicon Nitride Surface Modification and Cell Adhesion
Improvement of Tribological Behaviour of Biomedical Nanocrystalline Titanium by Magnetron Sputtered DLC/SiC Double Layer Films
Fabrication of Novel Cellulose/Chitosan Artificial Skin Composite
POSS/TiO2 Nanohybrids as Sun Protection Factors for Skin Changes Caused by Ultraviolet A Radiation
Preparation and Properties of Calcium Phosphate Cement Containing ZnO Whisker
Fabrication Idea Two-Dimensional Photonic Crystals by Growing Freshwater Pearls Induced by Rare Earth Cerium
Biomimetic Synthesis of Tooth-Like Hydroxyapatite under Organic Polymer Monolayer
Effect of Process Conditions on Microstructure and Properties of Bioactive Glass
Toughness Analysis of Cannon Bone Based on Microstructural Model
Human Platelet Extracts Stimulate the Terminative Differentiation of Growth-Plate Chondrocytes in Rabbit
Quantification of BSA in Tissue Engineered Medical Products by ELISA — Problems and Solutions
Surface Characteristics and Hemocompatibility of Modified NiTi Alloy Intravascular Stents
Study on Biomineralization of Poly (Vinyl Alcohol) Film via a Biomimetic Process
Preparation and Performance of Polypyrrole Film with Micro-Antennal Morphology for Medical Biology
The Effects of Different Hydroxyapatite/TiO2 Composite Coatings on Protein Expression of Osteoblast
Preparation, Microstructure and Properties of Biodegradable Aliphatic Polyesters by Using Nontoxic Magnesium Catalysts
Neovascularization of Porous Silk Fibroin Films(PSFFs) as Dermis Substitutes Implanted in Rats
High-Cycle Fatigue Mechanisms of a NiTi Shape Memory Alloy under Different Mean Strains
Influence of the Flux Ratio N2/Ar on the Formation of Mo-N Modification Layers on Ti6Al4V by Plasma Reactive Sputtering
Study on the Preparation and Micro Structure of the Mg Containing Porous HA with Ultra-Fine Grain
Hydroxyapatite Deposition by Alternate Soaking Technique on Poly (Vinyl Alcohol)-Coated Poly (ε-Caprolactone) (PCL) Substrate
Investigation of TiO2 Nanotube Electrodes: Fabrication, Annealing and Electrochemical Properties
Corrosion Behaviours of Mo Modified Ti6Al4V Alloy in Hank's Solution
Preparation of Porous Titanium by a Novel Foaming Process and MG63 Cell Behavior In Vitro
Effect of Microstructure and Texture on Corrosion Resistance of Magnesium Alloy
Elemental Release from Ni-Cr Dental Alloy in Artificial Saliva and Saline Solution
Phase Transformation of Biomedical Metastable β Titanium Alloy during Aging
Corrosion Behavior of Magnesium Alloy AX53 in Simulated Body Fluids
Biocompatibility of Chitosan/Heparin Multilayer Coating on NiTi Alloy
Negative Synergism between Corrosion and Wear of Nickel-Free Austenitic Stainless Steel in Artificial Body Solution
Electrospinning of Sodium Alginate with Poly(ethylene oxide), Gelatin and Nanometer Silver Colloid
Fabrication and Antibacterial Performance of Bio-Graded Nano-Composite Materials by Using Inkjet Printing Method
Stimuli-Responsive Materials Applied as Carriers of Immobilized Enzymes
Effect of the Surface Energy on the Biomineralization Behavior and Cell Compatibility of Carbonated Hydroxyapatite
Ring Opening Polymerization of ε-Caprolactone Catalyzed with Magnesium Lactate
Ti-Glass Biocomposite Coating Materials and their Crystallization Dynamics
Study on the Hemolysis Rate and Cytotoxicity Test of Porous Ultramicron HA Containing Mg
Protein Adsorption Behaviors on PLLA Surface Studied by Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D)
Gradient Rare-Earths Bioceramic Composite Coating Fabricated by Wide-Band Laser Cladding and its Bioactivity
Improved HA Coating on Titanium Substrate Using Induction Heating and Hydrothermal Treatment Methods
Preparation and Characteristics of Gradient Silk Fibroin/Hydroxyapatite Porous Composites
Study on Preparation and Properties of Nitric Oxide Releasing Polyurethane
Effects of Exercise on Antitumor Efficacy of DHAQ-Loaded PLA-PLL-RGD Nanoparticles in Hepatocellular Carcinoma
Flexibility Modification of Konjac Glucomannan Film by Deacetylation
Designing Nano-Hydroxyapatite in the Polyelectrolyte Complex Macroporous Scaffold Based on Chitosan and Hyaluronic Acid
Exothermal Behavior during the Hydration of the PCCP+DCPA System Cement
Surface Modification of Chitosan Membranes by Oxygen Plasma Treatment
Effect of Si Content on the Synthesis of Ti3SiC2 Bulk Material by Pressureless Sintering
Surface Hydrophilicity Improvement of RGP Contact Lens Material by Oxygen Plasma Treatment
Surface Modification of Fluorosilicone Acrylate RGP Contact Lens by Low-Temperature Ammonia Plasma
In Situ Synthesis and Characterization of β-Tricalcium Phosphate/Na Doped 58S Bioglass Composite by Sol-Gel Technique
The Targeting Magnetic Induction Heating of Nano-Carbon Iron Composite
Effects of Alkali and Heat Treatment on Apatite Forming Ability of a Micro-Arc Oxidized Ti6Al4V Alloy
Adhesion Strength of Sol-Gel Derived FHA Coating on Laser Gas Nitrided Pure Ti
Construction of Tissue Engineered Skin with VEGF-Modified Human Mesenchymal Stem Cells and Acellular Dermal Matrix
Effects of bFGF and Collagen on the Construction of Tissue Engineering Cartilage In Vitro in the 3-D Culture System
Effect of C2H2 Flow Rate on the Deposition of Zr-ZrC-ZrC/DLC Gradient Nano-Composite Film on Biomedical NiTi Alloy
Study on Polylactide/Poly(ether block amide) Composite Biomaterials and Shape-Memory Effect
The Segregation of Chemical Composition in NiTi Shape Memory Alloy Melted by VIM in Lime Crucible
Study of Electrospun PLLACL Nanofibrous Mats for Drug Delivery System
The Effects of Surfactants on the Granularity of the HA Powder Synthesized by Mechanochemistry
Development and Properties of a New Correction Instrument of Pectus Excavatum
Crosslinked Electrospun UPM/PHBV/PVP Fibers for Sustained Drug Release
Osteogenesis of Porous Bioceramics Scaffolds Consisted of Hydroxyapatite Spherules after Implanted in Different Non-Osseous Sites
A Ni/Surface-Modified Diamond Composite Electroplating Coating on Superelastic NiTi Alloy as Potential Dental Bur Design
Construction of Two-Gene Modified Artificial Bone by Using Recombinant Adenovirus
Preparation of Tetracalcium Phosphate and the Effect on the Properties of Calcium Phosphate Cement
Effect of High Temperature on Morphology and Structure of Nano-Hydroxyapatite/Collagen Composite
Effect of Hydroxyapatite Nanoparticles of Different Concentrations on Rat Osteoblast
Effect of EDTA on Electrodeposition of Hydroxyapatite Coatings
Microstructure and Toughness Mechanism of Shank Bone
Characterization of an Insoluble Collagen Sponge and the Potential for Tissue Engineering Scaffold
Microstructure and Shape Memory Properties of Biomedical Ti-(40-65) Ta (wt. %) Alloys
Influence of pH Value Stability on the Biomineralization of Bioglass
Study of Bio-Mineralization of BCP with Compensation of Calcium and Phosphate Ions
Evaluation of Precision Machining Characteristics for MAP of Magnesium Alloy
Production of Magnesium Alloy Billets by Semisolid Continuous Casting
Phosphate and Stannate Chemical Conversion Coatings Formed on AZ91D Alloys
