- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Incorporating Sustainable Practice in Mechanics of Structures and Materials is a collection of peer-reviewed papers presented at the 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21, Victoria, University, Melbourne, Australia, 7th - 10th of December 2010). The contributions from academics, researchers and practising engineers from 17 countries, mainly from Australasia and the Asia-pacific region, cover a wide range of topics, including:* Composite structures* Computational mechanics* Concrete structures* Dynamic analysis of structures* Earthquake and wind engineering* Fibre composites* Fire engineering* Geomechanics and foundation engineering* Masonry structures* Mechanics of materials* Shock and impact loading* Steel and aluminium structures* Structural health monitoring* Structural optimisation* Sustainable materials* Timber engineeringIncorporating Sustainable Practice in Mechanics of Structures and Materials will be a valuable reference for academics, researchers and practising engineers working in structural engineering and structural mechanics.
Contents
1.Keynote PapersStresses and deformations in reinforced concrete beams and slabs at service loads R.I. GilbertCommercialisation of fibre composites in Australia's civil engineering marketG.M. Van ErpDesign of steel-concrete composite structures with ultra-high strength and lightweight concreteJ.Y.R. Liew, K.M.A. Sohel & D.X. Xiong Melbourne rectangular stadiumP. Bowtell Innovative structural design using evolutionary topology optimisation techniquesY.M. Xie, X. Huang, Z.H. Zuo, J.W. Tang, B. Zhao & P. Felicetti2.Composite structuresImproving the through-thickness compression properties of aerospace sandwich composites by z-pinningA. Nanayakkara, S. Feih & A.P. MouritzStructural behaviour of beam-to-RHS column connection with blind boltsH. Yao, H.M. Goldsworthy & E.F. GadContact buckling theory of thin plates in composite members: A reviewX. Ma, J.W. Butterworth & C.G. CliftonSystematisation of timber-concrete composite connectionsC. Gerber & K. CrewsThree-dimensional finite element modeling of composite floor beamsF. Tahmasebinia & G. RanziShear strength of lightweight fibre reinforced geopolymer concrete composite beamT.S. Ng & S.J. FosterStrength and ductility of recycled aggregate concrete filled composite tubular stub columnsX.S. Shi, Q.Y. Wang, X.L. Zhao & F. CollinsNumerical modelling of short and long term behaviour of headed stud shear connector in composite steel-concrete beamsO. Mirza & B. UyImpact resistance of composite scarf joints under static tensionM.K. Kim, C. Wang, S. Feih, I. Herszberg & D.J. Elder3. Computational mechanicsAnalysis of orthotropic thick plates using hybrid-Trefftz elementsJ. PetrolitoNonlinear analysis of frames using low-order mixed finite elementsJ. Petrolito & K.A. LeggeHybrid stochastic and interval analysis of static responses of frame structuresC. Wang, W. Gao & C.M. SongNondeterministic fracture analysis by the scaled boundary finite element methodM.S. Chowdhury, W. Gao & Ch. SongFinite element analysis of the propagation of cracks in glass panelsI. Nurhuda, N.T.K. Lam, R. Dahal & E.F. GadModelling and simulation of helicopter accidents for occupant survivability assessmentJ.M. McCarthy, C. Bil & G. ClarkAdaptive airfoil control system using shape memory alloy actuator for unmanned aerial vehicleE.J. Abdullah, C. Bil & S. Watkins4.Concrete structures Parametric analysis of one-way slabs with low-ductility mesh steelH.Yao, H.M. Goldsworthy & L.Y.M. Nguyen Accounting for steel relaxation in prestressed concrete by finite element packagesH.L.Yip, F.T.K. Au & S.T. SmithIncreasing the flexural stiffness of FRP wrapped reinforced concrete columnsM.N.S. Hadi & V.YaziciTime-dependent analysis of reinforced concrete sections subjected to axial compression and biaxial bending R.I. Gilbert & G. RanziA new system for reinforced concrete buildings to prevent potential progressive collapseM.N.S. Hadi & T.M.S. AlrudainiA practical approach for the analysis of concrete members subjected to temperature gradientsG. Ranzi & R.I. Gilbert Evaluation of creep and shrinkage in a prestressed bridge using data from laboratory experiments and in-situ monitoringP. Omenzetter & N. IbrahimCreep and shrinkage of high strength concreteS.H. ChowdhuryRetrofitting of shear damaged reinforced concrete beamsT.G. SuntharavadivelCreep testing and analysis of shallow concrete domesE. Hamed, M.A. Bradford, R.I. Gilbert & Z-T. ChangConcrete walls with and without openings supported on three sidesJ.H. Doh, Y.C. Loo & S. FragomeniPerformance of high strength concrete and reactive powder concrete columns subjected to impactL. Huynh & S.J. FosterSize effect in confined concreteM.M. Attard & A. Khajeh SamaniA new model for confined concreteA. Khajeh Samani & M.M. AttardShear behaviour of in-situ concrete stitches of precast concrete segmental bridges C.C.Y. Leung & F.T.K. AuEvaluation of creep, shrinkage and modulus of elasticity models for high strength concrete N. Baidya, P. Mendis & S. FragomeniUse of lightweight concrete as infill of reinforced concrete sections V. Vimonsatit, M.A. Mazlan, H. Nikraz & A.S. WahyuniExperimental investigation of behaviour and shear strength capacity of LSRC slab V. Vimonsatit, P. Macri, H. Nikraz & A.S. WahyuniEstablishing model for the displacement ductility index of HSC beams N.M. Elbasha & M.N.S. HadiAnchorage zones behaviour of early age concrete: Application to post-tensioned members M. Sofi, P.A. Mendis, D. Baweja & Elvira E.Early age concrete creep: Using model B3 prediction M. Sofi, L. Zhang, P.A. Mendis & D. Baweja5.Dynamic analysis of structuresFatigue life prediction of modern gas turbomachine blades O.V. Repetskiy & B.M. CuongDynamic investigation of concrete bridges taking into account time-dependent effects X.T. Si & F.T.K. AuInterval dynamic response of structures with bounded parameters W. Gao, D. Wu & F. Tin-LoiDynamic response of bridges under moving vehicles with uncertainty in system parameters N. Liu, W. Gao & N. ZhangEffectiveness of variably tuned liquid damper in suppressing dynamic excitation B. Samali, S.M. Zahrai, Z. Vrcelj & S. AbbasiDynamic characteristics of reinforced concrete beams D. Tran & S. FragomeniA novel nonlinear system identification based upon Hilbert Transform G.Y. Yan, Z.S. Liu & A.D. StefanoDynamic performance of timber-concrete composite flooring systems R. Rijal, B. Samali & K. CrewsDesign of multiple viscoelastic tuned mass dampers for floor vibration applications T. Nguyen, E.F. Gad, J.L. Wilson & N. Haritos6.Earthquake and wind engineeringInvestigating the effect of pounding for inelastic base isolated adjacent buildings under earthquake excitations M.E. Uz & M.N.S. HadiA study of wind drags on straight and twisted towers J.W. Tang, Y.M. Xie & P. FelicettiSeismic performance assessment of lightly reinforced concrete columnsA. Wibowo, J.L. Wilson, M. Fardipour, N.T.K. Lam, K. Rodsin, P. Lukkunaprasit & E.F. GadSeismic assessment of asymmetrical buildings in low to moderate seismicity regions E. Lumantarna, N. Lam & J. WilsonIn-plane racking performance of point fixed glass facade systems S. Sivanerupan, J.L. Wilson, E.F. Gad & N.T.K. LamEvaluation of variation in dynamic response of a building from seismic records using system identification F. Butt & P. OmenzetterSeismic analysis of strength degraded structures B. Kafle, N.T.K. Lam, E.F. Gad & J.L. WilsonSeismic assessment of existing structures by displacement principles M. Fardipour, K. Thinley, E. Lumantarna, N. Lam, E. Gad & J. WilsonWind induced excitation of box girder gantry frames N. Haritos, C. Nguyen & T. NgoDuctility capacity of existing RC bridge piers in Australia M.N. Sheikh & H.H. TsangInfrastructure protection by scrap tyre-soil mixturesH.H. Tsang, W. Xiong, S. Yaghmaei-Sabegh, M.N. Sheikh & N.T.K. LamDisplacement based seismic assessment of cable stayed bridges H. Agheshlui, N.T.K. Lam & E.F. GadSeismic performance evaluation of a concrete gravity dam in Nepal D. Wagle, J.L. Wilson & K. AbdoukaSeismic behaviour of concrete moment resisting buildings on soft soil considering soil-structure interactionB. Samali, B. Fatahi & H.R. Tabatabaiefar7.Fibre compositesStructural properties of composite T-joints reinforced with z-pins T.M. Koh, S. Feih & A.P. MouritzA comparison of the shear behaviour of a fibre composite sandwich structure in the transverse and in-plane directionsA.C. Manalo, T. Aravinthan & W. KarunasenaThe effect of modulus of elasticity on the behaviour of railway turnout sleepers A.C. Manalo, T. Aravinthan, W. Karunasena & N. StevensBehaviour of fibre composite sandwich panels under uniformly distributed loading M.M. Islam & T. AravinthanEffect of chemical treatment on the mechanical and thermal properties of hemp fibre reinforced thermoset sandwich composites M.M. Kabir, H. Wang, F. Cardona & T. AravinthanPreliminary development of polymer based filler materials for GFRP tubular connector C.S. Sirimanna, M.M. Islam & T. AravinthanExperimental investigation into gomuti fibres/polyester composites A. Ticoalu, T. Aravinthan & F. CardonaBehaviour of fibre composite pile under axial compression load E.J. Guades, C.S. Sirimanna, T. Aravinthan & M.M. IslamTowards calculating the load-deflection response of anchored FRP-strengthened RC slabs S.T. Smith & S.J. KimNatural fibre composites with QLD based fibres and vegetable oils N.W. Manthey, F. Cardona, T. Aravinthan, H. Wang & T. CooneyStrength design of CFRP-reinforced steel tubular beamsJ. Haedir, X.L. Zhao, R.H. Grzebieta & M.R. BambachStress-strain model for high strength concrete confined by FRPW. P. Lokuge, S. Setunge & J.G. SanjayanDevelopment of pressure-impulse curves for fiber reinforced polymer strengthened reinforced concrete wallsA. Mutalib & H. Hao8.Fire engineeringFire resistance of connections in timber structuresP.J. Moss, A.H. Buchanan, T.M. Nilsen & M. FragiacomoNumerical modelling of load bearing steel stud walls under fire conditionsS. Gunalan & M. MahendranFire resistance modelling of prestressed concrete hollowcore floors using multi-spring connection elementsJ-K. Min, P.J. Moss, R.P. Dhakal & A.H. Buchanan Performance of high strength concrete walls subjected to fireT.B. Ta, T. Ngo, P. Mendis & N. HaritosDimensional characteristics of various types of fibres in fire resistant concreteY.S. Heo, J.G. Sanjayan, C.G. Han & M.C. Han9.Geomechanics and foundation engineeringThe analysis of engineering properties of compacted fill using finite element modelling techniquesG. Ren, J.M. Fernandes & J. LiCase study of mudflow using Flo2dB. Widjaja10.Masonry structuresAssessment of debonding failure models for FRP retrofitted URM structuresY. Zhuge & K.X. YeapMajor factors in reinforcing stone masonry for sustainable construction practiceR. Pun, B. Samali & B. Shrestha11.Mechanics of materialsHigh-cycle fatigue life prediction issues in helicopter componentsS.L.H. Chan, U.H. Tiong & G. ClarkLow-strain integrity testing of rock anchorsH. Mohammed & N. HaritosDynamic analysis of generalised stress intensity factors at multi-material wedgesC.M. Song, I. Chiong & F. Tin-LoiParticleboard production using mixtures of softwood and hardwood residuesK.K. Wong, S. Setunge & M. JollandsDeterioration mechanics - The competition between abiotic and biotic processesR.E. Melchers & R. JeffreyEffect of heat treatment on the maximum recovery stress of shape memory alloy under cyclic heatingM.B. Wong, H. Sadiq, X.L. Zhao & R. Al-Mahaidi 12.Shock and impact loadingNumerical simulation of high-performance SCS panels under static and impact loading conditionsS.Y. Kong, A.M. Remennikov & B. UyPreliminary study of the structure and support forms to mitigate blast and impact loading effectsH. HaoApproximate solutions to impact of a spherical object on the surface of a flat steel plateY. Yang, L. Zhang & N.T.K. LamDeflection damage criteria for concrete elements under blast loadingZ.I. Syed, P.A. Mendis, T. Ngo & N.T.K. LamThe ballistic impact characteristic of sandwich panel consisting of Kevlar woven fabric and titanium chipsY.C. Wong, D. Ruan, M.L. Sesso & S.Y. KimHypervelocity impact of steel balls into metallic blocksH. Bornstein, K. Ackland & C. AndersonBlast loading of metallic plates with polyurea coatingsK. Ackland, C. Anderson & S. WarnePreliminary investigation into the post repair performance of Ti-6Al-4V after occurrence of Foreign Object Damage (F.O.D.)N. Orchowski, R. Mohammed & G. ClarkPrediction of blast-induced window glass fragmentsH. HaoResponses of anchorage zones in cable-stayed bridges under blast loadsW.Y. Lua, T. Ngo, L. Zhang & P. Mendis13.Steel and aluminum structuresFatigue testing of subsea pipeline steel connections under combined actionsH.B. Liu, X.L. Zhao & Z.G. XiaoBolted beam-column moment connections between cold-formed steel membersA.H. Hazlan, M.Md. Tahir, A. Sulaiman & M. MahendranEffect of corrosion inhibiting compounds on fatigue of riveted jointsI.G.A.A. Jaya, U.H. Tiong & G. ClarkSplit Hopkinson pressure bar testing of aluminium alloy 6060 T5M.A. Kariem, J.H. Beynon & D. RuanModelling of multi-panel transmission tower retrofitted with leg reinforcementY. Zhuge & J. MillsThe influence of plastic zone size in stable tearingM.F. Ab Rahman, R.D. Mohammed & G. ClarkThe effect of medium strain rates on the mechanical properties of high performance steelsS.Y. Kong, A.M. Remennikov & B. UyAnalysis of defects in laser cladding of high strength steel for aerospace applicationS.D. Sun, R. Mohammed, M. Brandt, G. Clark, Q. Lui & M. JanardhanaBlind bolted side connection to unfilled hollow section columnsJ. Lee, H.M. Goldsworthy & E.F. GadEffects of opening in the cross girders of the flat bottom rail wagons to the load transferring mechanisms when used as road bridge deckL. Jamtsho, Manicka Dhanasekar, N. Palliyaguru & W. BayissaShear strength of LiteSteel beams with web openingsP. Keerthan & M. MahendranShear strength and design of LiteSteel beamsP. Keerthan & M. MahendranInvestigation of the influence of post installation of vertical braces in the lateral capacity of jacket type offshore platformsH. AgheshluiHigh rate compressive behavior of aluminum foams by modified SHPB techniqueS. Xu, J. Shen, J. Beynon, D. Ruan & G. Lu14.Structural health monitoringThermogravimetry analysis of deteriorated timber bridge elementsS. Venkatesan, M. Pannirselvam, M. Jollands, R. Shanks & P. SlatterA system for bridge network condition assessment and predictionB. Samali, K.I. Crews, K. Aboura, W. Ariyaratne & P.B. ManamperiA strategy for data collection and SHM for better asset management of bridges - A New Zealand outlookP. Omenzetter, S. Bush, T. Henning & P. McCartenDamage evaluation of a repaired timber beam using modal-based methodB. Samali, J. Li, K. Crews & F.C. ChoiIdentification of added mass on a two-storey framed structure utilising FRFs and ANNsU. Dackermann, J. Li & B. SamaliA practical approach to Fourier analysis for monitoring structural integrityM. Lamb, V. Rouillard & D. AinalisAn adaptive impulse response technique for evaluating the performance of structural elementsM. Lamb, V. Rouillard & D. AinalisANN-based structural element performance model for reliable bridge asset managementJ.B. Son, J.H. Lee, H. Guan, Y.C. Loo & M. BlumensteinCorrosion performance of embedded steel in fly ash geopolymer concrete by impressed voltage methodM. Olivia & H.R. NikrazA new damage feature based on wavelet packet transform for damage detection under ambient vibrationG. Wang, Z.S. Liu & G.Y. Yan 15.Structural optimisationShape optimization applied to aircraft wing structuresV. Anand & C. BilMulti-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applicationsZ.K. Awad, T. Aravinthan, Y. Zhuge & F. GonzalezDesign of new generation magnetorheological pinsY. Li, J. Li & B. SamaliMatlab implementation of 3D topology optimization using BESOR. Huang & X. Huang16.Sustainable materialsPhotocatalytic construction materials: An overview of recent developments and their application to permeable concreteJ.R. Bolt, Y. Zhuge & F. BullenMechanical properties of high-strength self-compacting concreteM. Soleymani Ashtiani, A.N. Scott & R.P. Dhakal Sustainable civil engineering materialsD. IonescuCompressive strength and drying shrinkage of cellular lightweight concrete as affected by moisture content of the exposed environmentH.Y. Lee, S. Setunge, M. Xie & S.L. MakHigh-strength rice husk ash concrete incorporating quarry dust fine aggregatesS.N. Raman, T. Ngo, P. Mendis, H.B. Mahmud, C.H. Lee & T.T. NguyenThe application of controlled permeability formwork to reduce the curing time of concreteJ.M. Fernandes, D. Law, T.C.K. Molyneaux & I. PatnaikuniEffects of fly ash source and curing procedure on strength development of geopolymersZ. Zhang, H. Wang, A. Reid & T. AravinthanDesign of Experiments (DOE) for investigating particleboard production using hardwood sawmill residuesG. Nirdosha, S. Setunge & M. JollandsImproving the damping properties of concreteS.F. Nabavi, B. Bhattacharjee & A. MadanEffect of clogging on the water permeability of pervious concreteR. Sriravindrarajah, H.M. Do, L.D. Nguyen &Y. AokiA novel multi-functional expansive additive for drying shrinkage reduction in mortarsP. Hamedanimojarrad, G. Adam, A. Ray, K. Vessalas, P. Thomas & S. Nejadi17.Timber engineeringA feasibility study of New Zealand radiata pine crosslamA.L. Fortune & P. QuennevilleTension perpendicular to grain strength of wood, Laminated Veneer Lumber (LVL), and Cross-Banded LVL (LVL-C)M. Ardalany, B. Deam, M. Fragiacomo & K.I. CrewsInvestigation of the embedding strength of New Zealand timber and view for the NZ standardS. Franke & P. QuennevilleModern trends in long span timber flooring systemsZ. Zabihi, K. Crews & B. SamaliFinite element evaluation of non-destructive testing methods for embedded timber poles in serviceA. Zad, J. Li, B. Samali & K. CrewsNon destructive assessment of in service timber utility polesS. Baraneedaran, K. Abdouka, J.L. Wilson, E.F. Gad & I. FlatleyRepair and strengthening of LVL beams with carbon FRPT. Tat, B. Samali & R. ShresthaDevelopment of an expedient moment connection for large span portal frames in LVL or GlulamF. Scheibmair & P. QuennevilleStructural performance of low grade timber slabsW. Karunasena & C.J. Summerville
