Titanium Alloys : Towards Achieving Enhanced Properties for Diversified Applications
  • 洋書

Titanium Alloys : Towards Achieving Enhanced Properties for Diversified Applications  Hardcover,  言語:ENG

Amin, A.K.M. Nurul (EDT)

  • ウェブストア価格 ¥32,656(本体¥29,688)
  • In Tech(2012/03発売)
  • ポイント 296pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
High Speed End Milling van Single Crystal Silicon Wafer : Een economische methode voor het bewerken van silicium in kneedbare modus (2021. 100 S. 220 mm)
  • 洋書

High Speed End Milling van Single Crystal Silicon Wafer : Een economische methode voor het bewerken van silicium in kneedbare modus (2021. 100 S. 220 mm)  Paperback

Amin, A.K.M. Nurul

  • ウェブストア価格 ¥12,962(本体¥11,784)
  • UITGEVERIJ ONZE KENNIS(2021発売)
  • ポイント 117pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
Frezowanie z duza predkoscia pojedynczej krysztalowej plytki krzemowej : Ekonomiczna metoda obróbki krzemu w trybie ciaglym (2021. 100 S. 220 mm)
  • 洋書

Frezowanie z duza predkoscia pojedynczej krysztalowej plytki krzemowej : Ekonomiczna metoda obróbki krzemu w trybie ciaglym (2021. 100 S. 220 mm)  Paperback

Amin, A.K.M. Nurul

  • ウェブストア価格 ¥12,962(本体¥11,784)
  • WYDAWNICTWO NASZA WIEDZA(2021発売)
  • ポイント 117pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
Heat Assisted Machining of Hardened Steel AISI H13 : For Longer Tool Life and Higher Efficiency in Die and Mould Making (Aufl. 2012. 172 S. 220 mm)
  • 洋書

Heat Assisted Machining of Hardened Steel AISI H13 : For Longer Tool Life and Higher Efficiency in Die and Mould Making (Aufl. 2012. 172 S. 220 mm)  Paperback

Amin, A.K.M. Nurul

  • ウェブストア価格 ¥17,989(本体¥16,354)
  • LAP LAMBERT ACADEMIC PUBLISHING(2012発売)
  • ポイント 163pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
High Speed Ductile Mode End Milling of Silicon with Air Blowing : Towards Achieving High Surface Finish in Machining Silicon using Conventional Machine with a High Speed Attachment (2013. 148 S. 220 mm)
  • 洋書

High Speed Ductile Mode End Milling of Silicon with Air Blowing : Towards Achieving High Surface Finish in Machining Silicon using Conventional Machine with a High Speed Attachment (2013. 148 S. 220 mm)  Paperback

Amin, A.K.M. Nurul/ Mohd Nasir, Siti Nurshahida/ Khalid, Noor Syairah

  • ウェブストア価格 ¥16,374(本体¥14,886)
  • LAP LAMBERT ACADEMIC PUBLISHING(2013発売)
  • ポイント 148pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
Chatter Control in Induction Heat Assisted End Milling : To Improve Machinability of Stainless Steel and Medium Carbon Steels (2013. 132 S. 220 mm)
  • 洋書

Chatter Control in Induction Heat Assisted End Milling : To Improve Machinability of Stainless Steel and Medium Carbon Steels (2013. 132 S. 220 mm)  Paperback

Amin, A.K.M. Nurul/ Mohamed Mahmoud, Abdelgadir

  • ウェブストア価格 ¥16,374(本体¥14,886)
  • LAP LAMBERT ACADEMIC PUBLISHING(2013発売)
  • ポイント 148pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
Induction Heat Assisted End Milling of Inconel 718 and Ti6Al4V Alloys : A comparative Assessment of Machinability in terms of Chatter, Surface Roughness and Tool Performance (2013. 196 S. 220 mm)
  • 洋書

Induction Heat Assisted End Milling of Inconel 718 and Ti6Al4V Alloys : A comparative Assessment of Machinability in terms of Chatter, Surface Roughness and Tool Performance (2013. 196 S. 220 mm)  Paperback

Amin, A.K.M. Nurul/ Hossain, Mohammad Ishtiyaq

  • ウェブストア価格 ¥19,020(本体¥17,291)
  • LAP LAMBERT ACADEMIC PUBLISHING(2013発売)
  • ポイント 172pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。
High Speed Machining of Titanium Alloy, Ti6Al4V : to Achieve Nano Level Surface Roughness (Aufl. 2012. 128 S.)
  • 洋書

High Speed Machining of Titanium Alloy, Ti6Al4V : to Achieve Nano Level Surface Roughness (Aufl. 2012. 128 S.)  Paperback

Amin, A.K.M. Nurul/ Alam, Md. Shah

  • ウェブストア価格 ¥15,607(本体¥14,189)
  • LAP LAMBERT ACADEMIC PUBLISHING(2012発売)
  • ポイント 141pt
  • オンデマンド(OD/POD)版です。キャンセルは承れません。