- ホーム
- > 洋書
- > 英文書
- > Science / Mathematics
Full Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These are the proceedings of the 7th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2011 - which was held during the 1-5 August 2011 in Quebec City, Canada. The conference brought together researchers and engineers/technologists working on various aspects of the processing, fabrication, structure/property evaluation and applications of both ferrous and non-ferrous materials; including biomaterials and smart/intelligent materials. The contents are thus and excellent and up-to-date guide to these subjects.
Contents
Preface and Committees
Keynotes
Alloy Design of Creep- and Oxidation-Resistant 9%Cr Steel for High Efficiency USC Power Plant
Creation of Harmonic Structure Materials with Outstanding Mechanical Properties
On the Microstructure of Plate Steels for API-5L X120 Applications
Shaping of Nanostructured Materials or Coatings through Spark Plasma Sintering
Development of NiMnGa/Polymer Composite Materials
Empirical Relationships for the Impact of Nb and C Content on the Mechanical Properties of Hot Rolled Microalloyed Steels
Progress and Issues in Thermomechanical Simulation: Experience in Tata Steel (Europe)
Transformation of Deformed Austenite at Temperatures above the Ae3
Strategy for Achieving High Strength in Al-Mg-Sc Alloys by Intense Plastic Straining
Orientation Relationships between Directionally Grown Precipitates and their Parent Phases in Steels
Magnesium Alloy Development for Automotive Applications
Microstructural Evolution of Ultrafine Ferrite during Plate Steel Processing Using Intermediate Cooling
Hot Working Defines Thermomechanical Processing (TMP) for Aluminum Alloys and Composites
Equivalent CTOD Concept for Correction of CTOD Toughness for Constraint Loss in Steel Weld Components
Characterization of a Biomedical Titanium Alloy Using Various Surface Modifications to Enhance its Corrosion Resistance and Biocompatibility
Mechanical Spectroscopy Applications for Investigating Metallurgical Processes
Scale/Physics/Time Properties and Functions in Bioartificial Systems
Hot Deformation and Dynamic Recrystallization of the Beta Phase in Titanium Alloys
Unusual Effect of Oxygen on the Mechanical Behavior of a β-Type Titanium Alloy Developed for Biomedical Applications
Influences of Cracking of Coated Layer on Critical Current in Coated Composite Superconductor
New Methodology to Model Simultaneous and Sequential Reactions: Main Results and Applications
Some Aspects Regarding Microstructural Heterogeneities during Steel Processing
Shape Memory Epoxy Foams: New Materials for Aerospace Applications
Bainite Formation at Low Temperatures in High C-Si Steel and its Mechanical Behavior
Influence of Alloying Elements on the Hall-Petch Coefficient in Ferritic Steel
DC Casting, Deformation and Strengthening of Al-Si Alloys
Friction Stir Processing (FSP) of Cast Metals: Processing - Microstructure - Property Relationships
Chapter 1: Aerospace Structural Metallic Materials/Ti Alloys
Effect of Wall Thickness Transitions on Texture and Grain Structure in Additive Layer Manufacture (ALM) of Ti-6Al-4V
Linear Friction Welding of a Forged Near-α Titanium Alloy
Sintering Performance and Mechanical Properties of Titanium Compacts Prepared by Spark Plasma Sintering
Mechanical Properties and Wear Resistances of TiC or B4C Reinforced Ti-6Al-4V Prepared by Spark Plasma Sintering
Surface Finish Issues after Direct Metal Deposition
Mesoscopic Modeling of Discontinuous Dynamic Recrystallization: Steady-State Grain Size Distributions
Improved Performance in Aerospace Structures with Ti and Ni Metal Matrix Composites
High Temperature Characteristics of Unidirectionally Solidified Al2O3/GAP Eutectic Composites with a Novel Microstructure
Determination of the Mechanism of Restoration in Subtransus Hot Deformation of Ti-6Al-4V
Powder Processing and Coating Heat Treatment on Cold Sprayed Ti-6Al-4V Alloy
Microstructure and Mechanical Properties of Spray-Deposited Zn-30Al-1Cu Alloy
Chapter 2: Aluminium Alloys
Obtention of an Al-Based Composite Material by Direct Fusion of Used Beverage Cans
Simulation of Hot Rolling Processing of an Al-Cu-Mg Alloy by Torsion Tests
Hardening of Al-Mg-Si Alloys and Effect of Particle Structure
Modeling of Heat Treatment of Randomly Distributed Loads in Multi-Zone Continuous Furnaces
Effect of Strain Rate on Hydrogen Evolution during Deformation in Al-Zn-Mg Alloys
Effect of Rapid Solidification on Microstructural Features of Al-Cr Alloys
Effect of Heat Treatments and Small Addition of Fe on the Occurrence of Serration in Al-Zn Alloys
Effect of Copper Variation and Thermomechanical Treatment on Microstructure and Properties in Aluminum Alloy Fin Stock for Heat Exchanger
Precipitation in Al-Alloy 6016 - The Role of Excess Vacancies
Through Process Microchemistry Effects on the Properties of 8xxx Sheet
The Effect of Erbium on the Properties and Microstructure of Al Alloys
Microstructure and Properties of an Al-7.5Zn-1.5Mg-1.4Cu-0.12Zr Alloy Forging
Research on Multi-Artificial Aging Applied to Aluminum Alloy 7150 Plate
Investigation on Quench Sensitivity of a Heat-Resistant Aluminum Alloy
Combined Effect of Deformation and Precipitation on Tensile Properties of an Al-Mg-Si Alloy
Effect of Additional Elements (Cu, Ag) on Precipitation in 6xxx (Al-Mg-Si) Alloys
Effect of the Thermomechanical Processing on Microstructure and Properties of an Al-Ce Alloy
Producing Aluminum Foam Sandwich Panel by Melt Drag Process
Combined Method of Electric Contact Heating and Diffusion Connection of Steel-Aluminum
Effects of Pre-Aging on Bendability of an Asymmetric-Rolled Al-Mg-Si Alloy
Research on the Mechanical Properties of Al6061 Intermetallic Compounds Solubility as Manufactured by Spray Casting
Particle Stimulated Nucleation in Severely Deformed Aluminum Alloys
Superplastic Behaviour of AA5083 Aluminium Alloy with Scandium and Zirconium
Development of Grain Refinement in Aluminium Field
Effect of Liquid Hot Isostatic Pressing on Structure and Mechanical Properties of Aluminum Gravity Die Castings
Effect of Cold Deformation on the Paint-Baking Response of Al-Mg-Si Alloy Sheet for Automotive Body
Manufacturing Slurry and Rheocasting of Hypereutectic Al-Si-Cu-Mg Alloy
Effects of Microstructures on Fatigue Behavior of an Al-Mg-Sc Alloy at an Elevated Temperature
Investigation of Quench Sensitivity of an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy
Deformability of Eutectic Al-Si Alloys Produced by Semi-Continuously DC Casting during Hot-Rolling
Chapter 3: Biomaterials
Coatings of Ti and TiO2 with Defined Roughness for Implants by Gas Flow Sputtering
The Effect of Mechanical Constraints on Gelatin Samples under Pulsatile Flux
Mechanical Properties of Thermomechanically-Processed Metastable Beta Ti-Nb-Zr Alloys for Biomedical Applications
Development of a Collagen/Clay Nanocomposite Biomaterial
Applications of Ceramic Nanoparticles in Nanomedicine
Dynamic Recrystallization of Biomedical Co-Cr-W-Ni (L-605) Alloy
Electrochemical Assessment of Cu-PIII Treated Titanium Samples for Antimicrobial Surfaces
Evaluation of Bone Quality in Mandible of Young M-CSF Deficient-Induced Osteopetrotic Mouse
Effect of Energy Density of Incident Beam on Mechanical Property of Titanium Alloy Products Fabricated by Electron Beam Melting (EBM) Method
How Oxygen Influences the Deformation Mechanism of the "Gum Metal" Titanium Alloy Composition
Preparation of HA-Coated Mg-4.0Zn-1.0Ca-0.6Zr(wt%) Alloy and its Biodegradation Behaviors
In Vitro Degradation of Ultrafine Grained Mg-Zn-Ca Alloy by High-Pressure Torsion in Simulated Body Fluid
Regeneration of Bone Mass and Bone Quality around Implant with Grooves for Aligning Bone Cells in Rabbit Hindlimb Bones
Influence of Shape Memory Properties on Sliding Resistance in Fixed Orthodontic Appliances
Influence of Hydrogen Discharged from Palladium Base Hydrogen Storage Alloys on Cancer Cells
Effect of Heat Treatments of Bioactive Nacre on HAp Formation in SBF
Electron Beam Melting: Moving from Macro- to Micro- and Nanoscale
Osteoconductive TiO2 Coating on Titanium Using Anodizing in High Content Phosphoric Acid
Quantitative Analysis of the Cellular Actin Cytoskeleton on Geometrically Designed Surface Topography
Control of Osteoblastic Cell Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure
Mechanical Properties of Ti-Cr-Sn-Zr Alloys with Low Young's Modulus
Young's Modulus Changeable Titanium Alloys for Orthopaedic Applications
Single Crystal Growth and its Microstructure in Co-Cr-Mo Alloys for Biomedical Applications
Osteoblast Behavior In Vitro in Porous Calcium Phosphate Composite Scaffolds, Surface Activated with a Cell Adhesive Plasma Polymer Layer
Collagen-Silk Fibroin Fibers: A Promising Scaffold for Vascular Tissue Engineering
High Performance Beta Titanium Alloys as a New Material Perspective for Cardiovascular Applications
Reconstituted Extracellular Matrix Improve Osteoblastic Differentiation onto Titanium Surfaces
Synthesis and Characterization of Hydroxyapatite-Based Nanostructures: Nanoparticles, Nanoplates, Nanofibers and Nanoribbons
Collagen Based Materials for Biomedical Applications: Preparation and Properties
The Analysis of Hip Joint Prosthesis Head Microstructure Changes during Variable Stress State as a Result of Human Motor Activity
Corrosion Behavior and Surface Analysis of Melt-Spun Mg-Based Metallic Glass in Physiological Saline Solution
Anodic Oxide Coatings on Ti Alloys and their Osteoconductivity
Electrophoretic Deposition of Organic - Inorganic Composites for Biomedical Applications
Chapter 4: Composites
Effect of Heat Treatment on Tensile Strength, Hardness and Thermal Conductivity of Blended Polymer Composite
Mechanical Behavior of High Boron Content Al-B4C Metal Matrix Composites at Elevated Temperatures
Fabrication of Injection Moulded 304L Stainless Steels Reinforced with Tungsten Carbide Particles
Composite 316L+Al2O3 for Application in Medicine
Evaluation of Cutting Process on the Tensile and Fatigue Strength of CFRP Composites
Investigating the Potential of TiB2-Based Composites with Ti and Fe Additives as Wettable Cathode
Fabrication of Metal-Based Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method
Microstructure and Superconductive Property of MgB2/Al Composite Materials
Degradation Mechanism of Polycrystalline Silicon Carbide Fiber due to Air-Exposure at High Temperatures
Microstructure of the New Route Wire Fabrication of V3Ga Compound Superconducting Wire Using High Ga Content Cu-Ga/V Precursor Composite Material
Forming Potential of Steel/Polymer/Steel Sandwich Composites with Local Plate Inserts
Mechanical Properties, Aging Behavior and Microstructure Evolution of Mg-Nd-Zn-Zr Based Magnesium Matrix Composite Reinforced with Alumina Fibers
Functionally Graded Biocomposites
Fabrication of Vapor Grown Carbon Fiber Reinforced Aluminum Composites by Spark Sintering
Microstructure and Compression Behavior of Cenosphere Filled Aluminum Syntactic Foams
Chapter 5: Dynamic Behaviour of Materials
Fabrication of Bulk Functionally-Graded Syntactic Foams for Impact Energy Absorption
Nanofragmentation Controlled by a Shock-Induced Phase Transition in Mullite Related Ceramics and its Application
Comparison of Experimental and Numerical Results for the Quasi-Static and Dynamic Tensile Behaviour of a Commercial Ti6Al4V Alloy as a Function of Initial Crystallographic Texture
Controlling of Distribution of Mechanical Properties in Functionally-Graded Syntactic Foams for Impact Energy Absorption
Explosive Welding of Molybdenum/Copper Using Underwater Shock Wave
Phase Transformation of Powdered Material by Using Metal Jet
Dynamic and Quasi-Static Compression Tests for Polylactic Acid Resin Foam
Formation of Whisker in Pure Sn under Tensile Stress and a Method of its Suppression
Transition Joints of Aluminum and Magnesium Alloy Made by Underwater Explosive Welding Technique
Underwater Explosive Welding Using Detonating Code
Effect of Temperature on Crater Formation and Ejecta Composition in Aluminum Alloy Targets
High Strain Rate Torsion and Bauschinger Tests on Ti6Al4V
Dynamic Tensile Properties of Magnesium Nanocomposite
Response of Silica-Nylon6 Nanocomposites to Static and Dynamic Loading
Hot Dynamic Densification of Materials by Utilizing Underwater Shock Wave
Impact Compressive Failure of a Unidirectional Carbon/Epoxy Laminated Composite in Three Principal Material Directions
Effect of Random Defects on Dynamic Response of Honeycomb Structures
Chapter 6: Energy Materials
Sintered Lamellar Soft Magnetic Composites: Shaping and Magnetic Properties
Centrifugal Separation of Primary Silicon during Solidification in Al-Si Alloy for Solar Silicon Feedstock
Atomic Resolution Investigations of Phase Transformation from TaN to CrTaN in a Steel Matrix
Influence of Laser Processing on Polycrystalline Silicon Surface
Microstructural Investigation on Tungsten for Applications in Future Nuclear Fusion Reactors
Effect of Tempering on Mechanical Properties and Microstructure of a 9% Cr Heat Resistant Steel
Effect of Boron on Microstructure and Impact Toughness of a 10%Cr Martensitic Steel
A Differential Scanning Calorimetry (DSC) Study of Phase Changes in an As-Received Zr-2.5Nb Pressure Tube Material during Continuous Heating and Cooling
Fast Melting and Refining of Recycled Silicon Powders from the Wafer Back Grinding Process for Solar Cell Feedstock
Evolution of Intermetallic Phase Fe2(W, Mo) in 9% Cr Steel during Creep Rupture Tests at 650oC
Accelerated Microstructure Transformation Caused by Thermal-Mechanical Fatigue
Structural Changes of Liquid Pb-Bi Eutectic Alloy
Pulsed Laser Deposition of Pseudocapacitive Metal Oxide Thin Films for Supercapacitor Applications
Study of Modified Layer on Exterior Surface of Superheater Tubes
Chapter 7: Fracture and Mechanical Behaviour
Influence of the Impurities on Cathodic Copper on the Ductility of Copper Wires
Fracture Resistance in GFRP-BMC Composites Induced by Sub-Millimeter Length Fiber Dispersion
Brittle Crack Propagation/Arrest Behavior in T-Joint Structure of Heavy Gauge Steel Plates
Low Velocity Surface Fracture Patterns in Brittle Material: A Newly Evidenced Mechanical Instability
Influence of Microstructure on Damage in Advanced High Strength Steels
Effect of Die Temperature on Tensile Property of Rheocast Phosphor Bronze
Effect of Pulsed Electric Current Treatment on the Corrosion and Strength of Reinforcing Steel
Intergranular Cracking in Alloy 690 with Nb, Mo, and Hf Additions: In Situ SEM High Temperature Deformation Study
Effects of Cleavage Triggers and Constraint on Brittle Fracture in Steel Weld Heat Affected Zone
Chapter 8: Friction Stir Processing Welding
Quality of Interfaces in Cu/Al Dissimilar Friction-Stirred Welds
Effect of Processing Parameters on Superplastic and Corrosion Behavior of Aluminum Alloy Friction Stir Processed
Tensile Fracture Behavior of Friction Stir Processed Al-7Si-0.3Mg Cast Alloy
Phenomena Leading to a Modification of the Nano-Sized Structure during Resistance Upset Welding of ODS Steel Cladding
Material Flow in Aluminum Friction Stir Welds
Microstructure and Mechanical Properties of FSWed Aluminum Extrusion with Bobbin Tools
Friction-Stir Welding of High-Softening-Temperature Materials Using Cobalt-Based Alloy Tool
Fine and Ultra-Fine Grained AZ61 and AZ91 Magnesium Alloys Obtained by Friction Stir Processing
Microstructural Modelling for Friction Stir Welding of High Strength Aluminum Alloys
Finite Element Simulation of the Mechanical Behaviour of Multifilamentary MMC during Wiredrawing
Chapter 9: Fuel Cells and Hydrogen Storage Technologies and Batteries
A New Method for Preparing Electrospinning-Derived Carbon Nanofiber Webs with Electrodeposited Sn-Sb Alloy as an Anode Material of Lithium Ion Batteries
Amorphous Silicon-Coated Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries
Tape Casting as a Multi Purpose Shaping Technology for Different Applications in Energy Issues
Development of Lean Alloyed Austenitic Stainless Steels with Reduced Tendency to Hydrogen Environment Embrittlement
Sintered Stainless Steel for Interconnectors for PEM Fuel Cell
Catalytic Properties of Ni3Fe Foil for Hydrogen Production from Methanol
Chapter 10: Intermetallics
Optimization of the Fluorine Effect for Improving the Oxidation Resistance of Tial-Alloys
High-Temperature Tensile Properties of Ti-Al-X (X=Cr,W) Consisting of α2, β and γ in Three Phases
Surface Effects on the Mechanical Properties of Gamma Titanium Aluminides
Deformation Microstructures of Two-Phase Intermetallic Alloy Composed of Ni3Al and Ni3V in Single Crystalline Form
Friction and Wear Properties of Fe7Mo6-Based Alloy under Various Sliding Conditions
Microstructural Refinement of Boron Containing β-Solidifying γ-Titanium Aluminide Alloys
Density Functional Theory and Ab Initio Molecular Dynamics Study of the Effect of Ti and Zr Transition Metals in D03 Fe3Al
The Microstructure, Creep, and Hardness Properties of Powder Metallurgy Beta Gamma TiAl-4Nb-3Mn Alloy
First Principles Investigation of Interaction of Oxygen with Low Index Surfaces of γ-TiAl
Chapter 11: Magnesium Alloys
The Effect of EMS on the Microstructure of LPSO Mg-Zn-Y Cast Alloy
Plastic Deformation Behavior in Magnesium Alloy Single Crystals
High Temperature Deformation and Associated 3D Characterisation of Damage in Magnesium Alloys
Ternary Intermetallic Compounds across the Mg-NiY Line at 673 K
Intragranular and Grain Boundary Precipitations with Aging Treatment in Mg-Al System Alloys Poured into Gravity Mold
Microstructure Evolution of AS21 Magnesium Alloy via the SIMA Process
Roll Casting of Clad Strip
Microstructural Factors Affecting the Deformation Behavior of Mg12ZnY LPSO-Phase Alloys
Formability of Magnesium-Lithium Alloy Sheet by Multi-Stage Deep Drawing
Experimental Study on Phase Diagram in the Vicinity of X or W Phase in the Mg-Zn-Y Ternary System
Deformation Behavior of Mg-Ni-Y Alloy with Long Period Stacking Ordered Phase
Control of the Nugget Nanostructure of Mg96Zn2Y2 Welded by Resistance Spot Welding
Microstructure and Mechanical Properties of Mg96Zn2Y2 Joints Welded by Resistance Spot Welding
Dynamic Strain Aging Behavior of a Mg-Ce Alloy and its Implications for Extrusion
Microstructure and Mechanical Properties of Extruded Mg-Zn-Ce-Zr Alloy Rods
HRTEM Observation of Precipitates in Mg-Gd-Zr and Mg-Y-Zr Alloys Aged at 423 K
Improving Corrosion Resistance of MRI 230D Mg Alloy by Hybrid Coating of Laser Surface Alloying and Plasma Electrolytic Oxidation
A Differential Scanning Calorimetric Study of the Mg-Cu-Y System
C Fibres - Mg Matrix Composites Produced by Squeeze Casting and Friction Stir Processing: Microstructure & Mechanical Behaviour
Improvement in Mechanical Properties of Coarse-Grained AZ61 Mg Alloy by Multidirectional Forging and Ultrafine Grain Refinement
Effect of Grain Size on Fatigue Crack Propagation in Extruded AZ31 Magnesium Alloys
Effect of Long-Period Stacking Order Phase and α-Mg Phase on Strength and Ductility of Mg-Zn-Y Alloy
Microstructure of the High-Strength Magnesium Alloy on Cylinder Upsetting
Creep Behavior and Microstructures in Grain Boundary Strengthened Mg-Al-Ca Thixomolded® Alloys
Evolution of Texture and Microstructure of AZ31 Mg Alloy Sheet at High Strain Rates
Microstructure and Mechanical Properties of Magnesium Alloy Prepared by Repetitive Upsetting
Grain Refinement of Mg-Al-Zn Alloy Bar during Hot Compression
Process-Structure-Property Relationships for Magnesium Alloys
Effect of Process Variables on Microstructural Features during Solidification of AM60B Magnesium Alloy
Evolution of Precipitated Phases during Ageing in High Alloyed Mg-Al Based Alloys
Microstructural Evolution during Recrystallization of Magnesiun Alloys
Effect of Cold Deformation on Microstructure and Mechanical Properties of Mg-8Gd-3Y-0.5Zr Alloy
Chapter 12: Metallic Glasses & Their Processing Bulk Metallic Amorphous Materials
Elastic Constants, Equation of State and Mechanical Relaxations of some Metallic Glasses at High Pressure
Non-Isothermal Crystallization Kinetics of Co67Fe4Cr7Si8B14 Amorphous Alloy
Pressure Sensitivity of Plasticity in Metallic Glasses below Glass Transition: A Literature Review
Manufacture and Industrial Application of Fe-Based Metallic Glasses
Effect of Inhomogeneity of Zr-Based Bulk Metallic Glass Plate on Fatigue Strength under Torsion
Molecular Dynamics Simulations Based on Plastic Crystal Model with Introducing United Atom Scheme Demonstrated for Zr2Ni Metallic Glass
Development of Cu-Clad Metallic Glass for Soldering
Precipitation in Zr-Based Ternary Alloys during Quenching
Chapter 13: Modelling & Simulation
Homogeneous Abnormal Grain Growth in Polycrystalline Materials
Flow Curve Modelling of an Austenitic Stainless Steel at High Temperatures Starting from the One-Parameter Model of Strain Hardening
Interface Motion and Interface Mobility of the Partitioning Phase Transformations in Fe-Mn-C and Fe-C Alloys: A Cyclic Phase Transformation Approach
An Analytical Technique for Optimization of Mechanical Performance of Foam Core Sandwich Structures
Mathematical Modeling of Behaviour a Liquid Steel Flow and a Non-Metallic Inclusions in the One Strand Wedge Type Tundish with a Subflux Turbulence Controller and a Low Dam
Numerical Modeling of Nonmetallic Inclusions Flowing Out during Solidification of Continuous Cast Steel Billets in Mould Zone
Hydrogen Charging of High Strength Steel Specimens and Physical Simulation of Cold Cracking under Laser Beam Welding Conditions
The Influence of the Initial State on the Softening and Precipitation Kinetics in Hot Metal Forming
Predicting Solid-State Phase Transformations during Welding of Ferritic Steels
Determining the No-Recrystallization Conditions for Industrial Hot Strip Rolling of Steels Using Laboratory Simulations
Effect of Water Temperature on Wetting Front Kinematics during Forced Convective Quenching
Modelling of Strip Shape and Profile during Cold Rolling of Ultra Thin Strip
Numerical Simulation of Solidification of Thick-Wall Stainless Steel Pipe in Horizontal Centrifugal Casting Process
Result Mining in Numerical Simulation of Casting and Heat Treatment Processes
Analysis of the Asymmetric Plate Rolling Process
Algorithm for Controlling Mechanical Properties of Hot Rolled Steels Using Bayesian Network Model
From TRB and LP Plate to Variable Gauge Rolling: Technology, Theory, Simulation and Experiment
Parabolic and Hyperbolic Two-Temperature Models of Microscopic Heat Transfer. Comparison of Numerical Solutions
Numerical Model of Thermal Processes in Domain of Thin Film Subjected to a Cyclic External Heat Flux
Study of Transverse Crack Formation of a Nb-Peritectic Steel
Characterization of WELD Heat Affected Zone of ASTM A709 HPS 100W
First-Principles Study of H2O Adsorption on Oxygen-Covered Fe Surface
Austenite-Bainite Transformation Kinetic Model for the Powder-Metallurgical Steel Astaloy 85 Mo
Physical and Numerical Simulation of Thermo-Mechanical Properties in the Weld Heat Affected Zone of an AlMgSi-Alloy
The Physical and Numerical Modeling of Heat Treatment the Experimental Complex-Phase (CP) Steel
Modelling the Flow Behaviour of Dual-Phase Steels with Different Martensite Volume Fractions by Finite Element Method
Computer Simulation of Spinodal Decomposition in Duplex Stainless Steels
The Influence of the Impeller Shape on Hydrogen Removal from Liquid Aluminium - Physical Model
Modeling Particle Distances of Coherent Prolate- and Oblate-Shaped Precipitates in bcc Systems
Evaluation of the Effects of Inclusion Distribution on the Local Ductility of DP Steel
3D FEM Modelling and Experimental Verification of the Rolls Wear during the Bar Rolling Process
Aluminum Hydride Clusters as Hydrogen Storage Materials and their Electronic Stress Tensor Analysis
Atomistic Simulation of Stress-Induced Grain Boundary Diffusion: For Tin-Whisker Problem
Fracture Laws for Simulating Compressive Fracture in Lattice-Type Models
Modeling of the Steel Flow and Non-Metallic Inclusion Separation due to Flotation in a Six-Strand cc Tundish
Ferrite Transformation Kinetics of Severely Hot-Deformed Austenite
Effect of Grain Size on the Hydrogen Diffusion Process in Steel Using Cellular Automaton Approach
The Solute Drag Model to Calculate Grain Growth Rate at High Temperatures in Carbon Steels
Simulation and Control of Distortion of Hydro Turbine Blade Steel Casting in Heat Treatment Process
Carbo-Nitride Precipitation in Tempered Martensite - Computer Simulation and Experiment
Numerical Simulation of Dynamic Strain-Induced Austenite-Ferrite Transformation and Post-Dynamic Kinetics in a Low Carbon Steel
Chapter 14: Nanostructured Materials
Size Effects and Structure-Sensitivity of Properties in Electrodeposited Nanomaterials
Internal Stresses in Nanocrystalline Nickel and Nickel-Iron Alloys
Crystallographic Features of the C-Type Orbital-Ordered, and Charge- and Orbital-Ordered States in the Simple Perovskite Manganite Ca1-xLaxMnO3
Electrodeposited Nanocrystalline Ni-Fe with Banded Structure
Obtaining Ultrafine and Nanocrystalline Structure by Hot and Warm Deformation in Microalloyed Steel X90
Nanostructured Superhydrophobic Silver Surfaces
Synthesis and Fabrication of Aligned Conjugated Polymer Thin Films
Characterization of Magnetic Properties of Nanocrystalline Ni and Ni-15%Fe Alloy
Chapter 15: Neutron Scattering & X-Rays Studies of Advanced Materials
X-Ray Measurement of Residual Stress Distribution in Sputtered Cu Thin Films
EDXRD Setup for Real Time Observation of a Gas Tungsten Arc (GTA) Welding Process
Effect of Coating with Hydroxyapatite on the Bonding of Bone to Implant
Macro to Micro Stress and Strain Conversion in Porous Ceramics
Residual Stress Analysis of Textured Materials by X-Ray Diffraction Method
Rolling Contact Fatigue Type Analysis of Rolling Bearing by XRD and TEM
Residual Strain Distribution around a Fatigue-Crack Tip Determined by Neutron Diffraction
Structure of Disordered Materials Studied by High-Energy X-Ray Diffraction Technique
Residual Stress Analysis of Stellite-Coated Forging Tool Steel Using Synchrotron Radiation Diffraction
Time-Resolved X-Ray Diffraction Study on Solidification of Fe-B and Fe-C Eutectic Alloys
In Situ Gas Supply System on the Powder Diffraction Beamline I11 at Diamond Light Source
Ultra Fast In Situ X-Ray Micro-Tomography: Application to Solidification of Aluminium Alloys
Determination of Shearing Stresses (τxz and τyz) Using X-Ray Diffraction Method with Two-Dimensional Detector
Hot Deformation of Cast and Extruded TiAl: An In Situ Diffraction Study
Local Residual Stress Distribution at the Tooth Root Surface of a Broached Steel Component
Optimising Sintering in Metal Injection Moulding Using In Situ Neutron Diffraction
Study of Fragment Behavior during Columnar-Equiaxed Transition of Hypoeutectic Alloy with Synchrotron Radiation
Chapter 16: Severe Plastic Deformation
Simulation on Nanostructured Metals Based on Multiscale Crystal Plasticity Considering Effect of Grain Boundary
Microstructure Evolution during the Accumulative Roll Bonding Process in Armco Iron
Numerical Analysis in the Process of Alternate Pressing and Multiaxial Compression
Shear Strength Measurement of Gum Metal during High-Pressure Torsion
Grain Refinement and Superplastic Deformation Behavior of Zn-Al Alloy
Grain Refinement of Magnesium Alloys by CONFORM: A Continuous Severe Plastic Deformation Route?
Experimental and Computational Studies of Competitive Precipitation Behavior Observed in Microstructures with High Dislocation Density and Ultra-Fine Grains
Enhanced Low-Temperature Impact Toughness of Ultra-Fine Grained SiCp/ZL108 Composites
Strengthening of Alloys with Elastic Anisotropy by Severe Plastic Deformation
Developing Hardness and Microstructural Homogeneity in High-Pressure Torsion
Equal Channel Angular Pressing of Cu-Al Bimetallic Rod
Effect of Annealing on the Microstructure, Texture and Mechanical Properties of Severely Deformed Interstitial Free Steel
Friction Stir Processing of the Magnesium Alloy AZ61: Grain Size Refinement and Mechanical Properties
Ultrafine Grain Formation in Aluminum Alloys during Hot Severe Plastic Deformation
Crystallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation
Effect of Grain Boundaries on Fracture Toughness in Ultrafine-Grained Metals by Atomic-Scale Computational Experiments
Microstructural and Mechanical Properties of UFG Silver Subjected to Severe Plastic Deformation by ECAP
Specific Mechanical Properties of Superplastically Formed Components and Resulting Applications for Vehicles
Mechanical Properties of Ultrafine Grained Two-Phase Titanium Alloy Produced by "abc" Deformation
Ultrafine Grain Structure Evolution in AA6085 Aluminium Alloy Processed by HPT at Increased Temperature
Chapter 17: Smart/Intelligent Materials & Processes
Shielding Effectiveness of CNTs/SSFs/PA6 Conductive Composites
Application of EBSD to the Crystallographic Investigation on Ni-Mn-Ga Alloys
Elaboration of Architectured Materials by Spark Plasma Sintering
Influence of Fe Content of Ti-Mn-Fe Alloys on Phase Constitution and Heat Treatment Behavior
Deformation Texture of Ti-26mol%Nb-3mol%Al β-Titanium Alloy
Effect of Substrate Temperature on the Shape Memory Behavior of Ti-Ni-Cu Ternary Alloy Sputtered Films
Thermoelectric Properties and Densification Behavior of SrTiO3/TiB2 Composites
Mechanical Properties of Hot-Pressed Compacts Made by Alumina Particle Dispersion Magnesium Powders
Stability of Ti-Ta Base High Temperature Shape Memory Alloys
Smart Processing of Micro Photonic Crystals for Terahertz Wave Control - Freeform Fabrication by Stereolithographic Technique -
A Comparative Study of Structure Formation in Thermomechanically Treated Ti-Ni and Ti-Nb-(Zr, Ta) SMA
Application of Digital Image Correlation (DIC) on Magnetostriction of Fe-Pd Alloy
Fabrication of Ti-Sn-Cr Shape Memory Alloy by PM Process and its Properties
Study on Binder System for Micro Powder Injection Molding of ZrO2 Ceramic
Dynamic Molding of Powder Particles at Room Temperature
Metal Injection Molding of Super Elastic Ti Alloy Materials
Thermal Properties of Al/Diamond Composites Fabricated in Continuous Solid-Liquid Co-Existent State by SPS
Surface Modification of Cobalt Chrome Molybdenum Cast Alloy by Electron Beam Irradiation
Crack-Less Wafer-Level Packaging Using Flash Heating Technique for Micro Devices
Multi-Functional Metal/Ceramic Hybrid Composites for Structural Applications
Effects of Co Addition on Crystal Structure, Thermal Stability and Magnetic Properties of Ni-Mn-Ga Ferromagnetic Shape Memory Alloys from First-Principles Calculations
Phase Transformation in Fe Alloys Induced by Surface Treatment
Development of Numerical Tool for Analysis of Microstructural Fracture Behavior in Smart & Intelligent Materials
Electrochemical Characteristics of 410 Stainless Steel Produced by MIM Process through EIS Method under SSRT Test
Metal-Containing DLC: Toward a Smart Coating on Smart Materials
The SMA: An Effective Damper in Civil Engineering that Smoothes Oscillations
Training Effects on Damping Capacity in Mn-22.5mass%Cu-5mass%Ni-2mass%Fe Alloy
Effect of Third Elements on Pseudoelasticity in Fe3Ga Alloys
Chapter 18: Steels
Embrittlement of a High Manganese TWIP Steel in the Presence of Liquid Zinc
The Formation of Ultrafine Ferrite and Low Temperature Bainite through Thermomechanical Processing
Hot-Rolling of Advanced High-Manganese C-Mn-Si-Al Steels
Effect of Varying High Frequency Induction Bending on the Longitudinal SAW Weld of API X80 Steel Pipe
Dual Phase Steel Characterization for Tube Bending and Hydroforming Applications
Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling
Cooling Process for Precipitation Strengthening of Vanadium in Ferrite
Metallurgical Design of High Strength/High Toughness Steels
Theoretical and Experimental Analysis of the Cooling Ability of Device for the Plain Round Bars Accelerated Cooling Process
Mechanical Properties of Ultra Fine Particle Dispersion Strengthened Ferritic Steel
Development of Reduced Rolling Process for Steel Plate
Modeling of the Influence of Admixing and Prealloying on the Optimisation of Compressibility and Sinter-Hardenability of Steel Powders
Effect of Coiling Temperature on Kinetics of Austenite Formation in Cold Rolled Advanced High Strength Steels
Study of the Microstructure and Strain Induced Precipitation during Thermomechanical Processing of Low Carbon Microalloyed Steels
Influence of Nb Microaddition on a Microstructure of Low-Alloyed Steels with Increased Manganese Content
Influence of Chromium on the Hall-Petch Coefficient in Ferritic Steel
Microstructure Evolution and Softening Processes Occurring during Annealing of Hot Deformed Ni-30Fe Austenite
The Influence of Austenitization Temperature on the Mechanical Properties of a Prehardened Mould Steel
Quality Analysis of Pig Iron Produced in One of Polish Steelworks
Improvement of Rolling Contact Fatigue Life of Bearing Steel by Quenching and Partitioning Process
The Effect of Time and Temperature Variations during Isothermal Annealing on the Mechanical Properties of High Carbon Bainitic Steel
The Effect of Coke Quality on Blast Furnace Working
Innovations in Simulation of Microstructure Developments
Influence of Temperature on Strain Induced Precipitation Kinetics in Microalloyed Steels
Low C High Mn Cold Rolled TWIP Steel: Kinetics of Isothermal Recrystallization
Fracture Behavior Transition by Change of Strain Rate in Dislocation-Induced Si Steels
The Stacking Fault Energy and its Dependence on the Interstitial Content in Various Austenitic Steels
Work Hardening Mechanism in Soft Particle Dispersion Ferritic Steel
The Role of Notches on Fatigue Life of TWIP Steel in the HCF Regime
Effect of Static Aging on Mechanical Properties of an 18Cr-8Ni-W-Nb-V-N Stainless Steel
Measurement of Deformation-Induced Martensite in Stainless Steel Using Magnetic Contact Force
Effect of Ferrite Grain Boundary on Strain Aging Behavior in Nb-Bearing Ultra-Low-Carbon Steel Sheets
Cutting Properties of Austenitic Stainless Steel by Using Linear Polarized CO2 Laser without Assist Gas
Austenite Stabilization by Quenching and Partitioning in a Low-Alloy Medium Carbon Steel
Recrystallization Behaviour of Nb and Ti+Nb Added Ferritic Stainless Steels
Effect of Interpass Temperature on Microstructure and Mechanical Properties of Weld Metal of 690 MPa HSLA Steel
Study of the Hydrogen Traps in a High Strength TRIP Steel by Thermal Desorption Spectroscopy
Influence of Two-Step Austempering Process on the Fracture Toughness of a Low Carbon Low Alloy (LCLA) Steel
Study on the Microstructure and Mechanical Properties of a High Strength Crack-Free Steel
Microstructure, Mechanical Properties and Formability of a Duplex Steel
Potential of Hot Rolled Dualphase Steel from Compact Strip Production CSP® in Automotive Applications
New Constitutive Analysis of Microstructural Evolution: Hot Compression of Gamma Iron
Volume Change Associated to Carbon Partitioning from Martensite to Austenite
Development of Innovative and Efficient Welding Technologies for Plates and Profiles Made of High Strength Steels Using the Example of the Production of Mobile Cranes
Model for Predicting Recrystallization Behavior of Cold Rolled Extralow Carbon Steel Sheets
Evolution of Microstructure and Mechanical Properties during Tempering of Continuously Cooled Bainitic Steels
Eutectoid Decomposition of δ-Ferrite in Ferritic-Austenitic Duplex Cast Steel - Structural and Morphological Study
Precipitation Strengthening of Micro-Alloyed Steels Thermo-Mechanically Processed by Ultra Fast Cooling
Kinetics of Grain Refinement by Warm Deformation of 304-Type Stainless Steel
Effect of Bake-Hardening Treatment on the Mechanical Properties of High Strength Bainitic Steel Produced by Thermomechanical Processing
Microstructure Control of a Low Carbon Martensitic Stainless Steel by Quenching and Partitioning Heat Treatment
Influence of Matrix Structure and Hard Carbide on Abrasive Resistance of Steel Plates
Influence of Substitutional Atoms on the Solubility Limit of Carbon in B.c.c. Iron
On the Methodology of Thermal Desorption Spectroscopy to Evaluate Hydrogen Embrittlement
Fatigue Property of a 2.8GPa Grade Maraging Steel
Effect of Electric Current Direction on Texture Evolution in a Cold Rolled Fe-3%Si Steel under Electric Current Pulses Treatment
Effects of Magnetic Field Intensity on Carbon Diffusion in Pure Iron in the Single-Phase Austenite Region
Improved Mechanical Properties in Ti/Mo-Bearing Martensitic Steel by Precipitation and Grain Refinement
Low Temperature Precipitation in Nb-Added Si- and Si-Free Bainitic Steels
Chapter 19: Superalloys High & Super HighTemp.Materials
Characterization of Precipitation Kinetics of Inconel 718 Superalloy by the Stress Relaxation Technique
3D Imaging Using X-Ray Tomography and SEM Combined FIB to Study Non Isothermal Creep Damage of (111) Oriented Samples of γ / γ ' Nickel Base Single Crystal Superalloy MC2
Modeling the Electrical Response of Waspaloy due to the Nucleation, Growth, and Coarsening of γ'
Microstructure of Thermal Barrier Coatings (TBC's) Obtained by Using Plasma Spraying and VPA Methods
Tensile Properties of Low Angle Boundaries of Single Crystal Superalloy DD6
DTA Analysis on the Solidification Behavior of the Al2O2-Y2O3-ZrO2 Ternary Oxide System and Microstructural Investigation
Crack Growth Behavior in ATI 718Plus® Alloy
Precious Metals in High Temperature Applications - The Cause of Damage and its Avoidance
Influence of Temperature and Strain Rate on Dynamic Softening Processes in Allvac® 718Plus™
Oxidation Behaviors of Two and Three Phase Mo-Si-B Alloys via Si Pack Cementation
A Brief Introduction to Alloy Phase Chemistry Determination under EPMA/SEM-EDS Conditions and its Applications
Effect of Surface Recrystallization on the Low Cycle Fatigue Behavior of Directionally Solidified Superalloy DZ4 by In Situ SEM Studies
Microstructure and Mechanical Properties Development in Cross Roll Rolled Ni-30Cr Alloy
Microstructural Assessment of IN718: A Closed-Loop Fatigue Approach
Influence of Stacking Fault Energy on Creep Mechanism of a Single Crystal Nickel-Based Superalloy Containing Re
Solidification Structure of Incoloy800 Superalloy with Electromagnetic Field
Modern Control Theory Applied to Remelting of Superalloys
Surface Recrystallization and Twin Formation in a Single Crystal Superalloy
Microstructure Change of B2 Precipitates in an Fe-Al-Ni Alloy due to Two-Step Heat-Treatment
Recrystallization in HR3C Austenitic Heat Resistant Steel
Chapter 20: Surface Engineering/Coatings
Foresight of Material Surface Engineering as a Tool Building a Knowledge-Based Economy
Study on Surface Roughness Transformation during Metal Rolling
Antifouling Stainless Steel Surface: Competition between Roughness and Surface Energy
Improving Releasability of Mold Materials for IC Encapsulation Using Epoxy Compounds
Preliminary Study on the Fretting Wear Reliability of an Annular Nuclear Fuel
Effect of Surface Hard Layer and Forging Conditions on the Resistance of Plastic Deformation of Hot Forging Tools
Superhydrophobic RTV Silicone Rubber Coatings on Anodized Aluminium Surfaces
Laser Cladding of Nickel Alloy with Ceramic Nanopowder on Steel as Coating in Corrosive Media
Oxidation Resistance and Self Hardening of CrAlN/BN Nanocomposite Coatings
Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing
Effect of Diffusion Condition for Aluminizing on TiAl Based Alloy
Chemical Spray Pyrolysis Path to Synthesis of ZnO Microsausages from Aggregation of Elongated Double Tipped Nanoparticles
Nitriding of Ternary Iron-Based Alloys: Metastable Mixed Nitrides, Excess Nitrogen and Stress-Depth Profile
Caracteristics of TiN Coating Films for Large Sizes Prepared by Arc Ion Plating
Correlation between Tribological Properties, sp²/sp³-Ratio and H-Content of Low-Wear Diamond-Like Carbon (DLC) Layers
Chapter 21: Texture
Effect of Trench Aspect Ratio on Microstructure and Texture in Damascene Cu Interconnects
Orientation Gradients in α-Fibre Grains of Cold Rolled IF Steels
Effect of Electric Field Strength on Texture Evolution of IF Steel Sheet during Annealing
Influence of Heating Rate and Decarburization Temperature on the Microstructure and Magnetic Properties of Grain Oriented Electrical Steel
Microstructure and Texture Evolution of Fe-Si Steels after Hot Dipping and Diffusion Annealing
Thermomechanical Treatment for Enhancing Deep Drawability of Copper-Bearing Bake Hardening Steel
Numerical Model of Microstructure and Fracture of Coated Aluminum Alloys: A Novel Design Approach
Influence of Surface Micro Texture on Photocatalitic Function of Titanium Dioxide Film
Microstructure and Texture Development in Pure Ta Sheets Processed by Conventional Rolling and Cross Roll Rolling
Evolution of Crystallographic Texture in Pure Iron and Commercial Steels by γ to α Transformation
Texture Evolution in Nanocrystalline Fe Induced by Surface Mechanical Attrition Treatment
Crystallographic Behaviors of Uni-Axial Deformed High Manganese Steels
Calculation Methods to Determine Crystallographic Elements Based on Electron Diffraction Orientation Measurements by SEM/EBSD or TEM
Effects of Magnetic Field Intensity on Microstructure and Orientation of Proeutectoid Ferrite in Fe-C Alloy
Chapter 22: Thermomechanical Processing: Steels
3D Image-Based Stereology
Effect of Intercritical Annealing Time on Microstructure and Mechanical Behavior of Advanced Medium Mn Steels
Two Novel Methods to Realize the Superplastic Forming of Ultrahigh Strength Steels
Dynamic Recrystallization Mechanisms Operating under Different Processing Conditions
Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades
Thermo-Mechanical Processing of Low Manganese, Titanium Added Pipeline Steels
Determination of the Non-Recrystallisation Temperature (Tnr) of Austenite in High Strength C-Mn Steels
Modelling Deformation-Induced Precipitation Kinetics in Microalloyed Steels during Hot Rolling
Effect of Quenching and Partitioning Temperatures in the Q-P Process on the Properties of AHSS with Various Amounts of Manganese and Silicon
Transformation of Deformed Austenite at Temperatures above the Ae3
Modeling Alloying and Thermomechanical Processing Effects on the Austenite Decomposition Kinetics and Final Microstructure of Line-Pipe Steels
New Trends and Technologies in Thin-Slab Direct Rolling: Improved Microstructure & Mechanical Behavior
A Review of the Stress-Relaxation Method for Following the Kinetics of Precipitation, Recovery and Recrystallization
Static Softening Behaviour in High Aluminum Steels
Rapid Spheroidization and Grain Refinement Caused by Thermomechanical Treatment for Plain Structural Steel
Behavior of Pearlite in ThermoMechanical Processing and Service-Historical Perspective
Microstructure Modelling of Solid-State Transformations in Low-Alloy Steel Production
Development of Asymmetric Rolling for the Better Control over Structure and Mechanical Properties in IF Steel
Hot Deformation Behaviour of Low Alloyed Steel
Processing and Microstructure of Grain Non-Oriented Electrical Steel Strips with Improved Magnetic Properties
Effect of Magnetic Field Processing on Recrystallization and Grain Growth
Advanced TMCP Steel Plates for Pipelines and Structurals
Optimising Thermomechanical Processing with Reduced Energy Demand
Evaluation of the Behaviour and Properties of a High-Si Steel Processed Using Direct Quenching and Partitioning
Microstructure and Property Characteristics of CSP®-Produced Advanced High Strength Steels
Physical and Mathematical Modeling of Austenite Microstructure Evolution Processes Developing in Line-Pipe Steels under Hot Rolling
New Development and Application of Microalloyed Medium Carbon Steel for Auto Forging Products
Transformation of a High Strength Steel during Deformation at α/γTemperature
Chapter 23: Thin Films & Interface Engineering
Texture Effects in Solid-State Reactions of Thin Films
Delamination of Cu and Ti Thin Films Deposited by Magnetron Sputtering on Cu Substrate: Analysis of Reasons
Fabrication and Characterisation of Diluted Magnetic Semiconductors Thin Films Using Ion Beams
A Simple Method to Create Superhydrophobic Aluminium Surfaces
Control of Grain Boundary Microstructures in Sputtered Gold Thin Films by Surface Energy-Driven Grain Growth
Observation of Stress-Driven Migration of Specific Planar Grain Boundaries in Al Bicrystals
Plastic Domain Microstructure and Hardness Analysis of Indented Layered Composite
Microstructure Coating Influence for Optimized Diamond Deposition
CdS Thin Film Growths on Sapphire Substrates Having Heteroepitaxial Transparent Conducting Underlayers
Diffusion Behavior and Interfacial Reaction of Heterogeneous Metal Systems Controlled by High Magnetic Fields
Single Photon Generation from Nitrogen Atomic-Layer Doped Gallium Arsenide
Chapter 24: Welding & Joining
Dynamic Resistance Based Model for On-Line Resistance Spot Welding Quality Assessment
Specific Energy as a Characterizing Parameter for Laser Welded Ti-5Al-5V-5Mo-3Cr Alloy
Microstructural Characterisation of Railhead Damage in Insulated Rail Joints
Simplified Simulation of the Friction Stir Welding Process. Influence of the Boundary Conditions Modelling
Experimental and Numerical Investigation of Residual Stress and Distortion Control during Welding of AISI-316L Plates
Laser Joining of Metal and Plastic Using Insert Materials
Low Temperature Sintering Bonding Process Using Ag Nanoparticles Derived from Ag2O for Packaging of High-Temperature Electronics
Thermoplastic Adhesive for Thermosetting Composites
Dissimilar Metal Joining of Steel to Aluminum Using the Arc Heat Source
Optimization of Welding Parameters for Repairing NiAl Bronze Components
Effect of Water Cooling on Grain Structures and General Mechanical Properties of 2219-T6 Friction Stir Welded Joint
Hybrid Laser-Arc Welding of HSLA-65 Steel Plate: Microstructural and Mechanical Property Evaluation of Butt Welds
Optimization of Laser Welding Parameters in Aluminum Alloy Welding and Development of Quality Monitoring System for Light Weight Vehicle
Resistive Implant Welding of Advanced Polymers
Development of Low Temperature Bonding Technique of Titanium and Zirconium Using Hydrogen Diffusion-Induced Phase Transformation
Preliminary Investigation on Friction Spot Welding of AZ31 Magnesium Alloy
Linear Friction Welding of a Single Crystal Superalloy
Microstructure and Wear Characteristics of Fe-Based Hard-Facing Alloy Claddings Formed by Gas Tungsten Arc Welding
Parameters Influencing Steady-State Grain Size of Pure Metals Processed by High-Pressure Torsion
Modelling Textures Formed during the Plane Strain Compression and Subsequent Static Recrystallisation of Body-Centred Cubic (BCC) Metals
Effect of Silicon on the Microstructure, Tensile Properties and Hot Tearing Susceptibility of AZ91E Alloy
Effect of Pre-Strain on Fatigue Behaviour of AZ31 Mg Alloy
